Thèses sur le sujet « Energy Mooring »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 18 meilleures thèses pour votre recherche sur le sujet « Energy Mooring ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.
Parish, David Nigel. « A novel mooring tether for highly dynamic offshore applications ». Thesis, University of Exeter, 2015. http://hdl.handle.net/10871/21337.
Texte intégralGordelier, Tessa Jane. « Enhancing wave energy deployments through mooring system reliability assessment ». Thesis, University of Exeter, 2016. http://hdl.handle.net/10871/24917.
Texte intégralCAGNINEI, ANDREA. « Hull and mooring design of gyroscopic-based wave energy converter ». Doctoral thesis, Politecnico di Torino, 2015. http://hdl.handle.net/11583/2615515.
Texte intégralHarnois, Violette. « Analysis of highly dynamic mooring systems : peak mooring loads in realistic sea conditions ». Thesis, University of Exeter, 2014. http://hdl.handle.net/10871/17205.
Texte intégralWang, Mingming. « A durable mooring system for a winch-based wave energy converter ». Thesis, KTH, Maskinkonstruktion (Inst.), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209484.
Texte intégralProjektet har behandlat utvecklingen av en ny teknik för en förnybar energikälla, vågenergin, som anses vara en av de mest lovande förnybara resurserna med potential att bidra till en energiproduktion som motsvarar cirka 10 procent av världens energiförbrukning . Ett punktabsorberande koncept som använder en kraftuttagsenhet (PTO) omvandlar havsytans vågsrörelser till elektricitet. På grund av hårda arbetsförhållanden ger underhållsarbete stora problem och ett förtöjningssystem behöver utvecklas. Syftet med detta projekt är att utforma ett hållbart förtöjningssystem för minst 20 års drift, även i en hård havsmiljö. En geometrisk modell av förtöjningssystemet har skapats baserad på dimensionering av dess komponenter. Flera koncept genererades och utvärderades med en Pugh-matris. En simulering av de olika spänningar som påverkar systemets prestanda gjordes för att validera designen. Dessutom har detaljkonstruktion av de olika delarna av systemet gjorts, så att de kan tillverkas i ett framtida arbete.
Ransley, Edward Jack. « Survivability of wave energy converter and mooring coupled system using CFD ». Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3503.
Texte intégralPASSIONE, BIAGIO. « Hydrodynamic analysis and mooring design of a floating pitching Wave Energy Converter ». Doctoral thesis, Politecnico di Torino, 2018. http://hdl.handle.net/11583/2714195.
Texte intégralHealy, Strömgren William. « Automatic Adjustment of the Floatation Level for a Tight-moored Buoy ». Thesis, Uppsala University, Department of Earth Sciences, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-88883.
Texte intégralDenna rapport ger förslag på olika metoder att automatiskt justera flytläget på en statiskt förankrad boj, en överblick över de processer som styr ändringen av vattennivån och en statisktisk analys på vattennivåförändringarna vid Stockholm, Kungsholmsfort och Kungsvik.
Beroende på vattenivåns variation finns olika metoder för justering. Områden med små variationer av vattennivå lämpar det sig bäst utan någon som helst justering av flytläget. Områden med inte för stora tidvattensförändringar bör justeras med ett system bestående av vinsch, växellåda med en utväxling på 10 000:1, en 12 V DC motor, ett skötselfritt 12 V batteri, en luftlindad linjärgenerator och en trådtöjningsgivare. Områden med stora variationer i tidvatten behöver en avlastning för motorn i form av en fjäder och dämpare. De monteras horizontellt inuti bojen för att skyddas från den yttre miljön.
Den statistiska analysen påvisade de största vattennivåändringarna vid både Kungsviks och Kungsholmsforts mätstationer, båda uppvisade ett intervall på 1,6 m mellan minimum och maximum. Kungsvik var den station med de största dagliga variationerna, detta på grund av tidvattnets påverkan i området.
This thesis gives examples of different methods of automated adjustment of floatation level for a static moored buoy, an overview of the theories behind water level change and a statistical analysis of the water level changes for Stockholm, Kungsholmsfort and Kungsvik.
Depending on the range and frequency of the water level change different methods of adjustment are recommended. For areas with small changes in sea level the best choice would be no adjustment of the floatation level. Areas that are influenced by moderate tidal ranges should incorporate a system of regulation consisting of a winch, gearbox with a gear ratio of around 10,000:1, 12 V DC motor, 12 V maintenance free battery, air coiled linear generator and a strain gauge. For areas with large tidal ranges the previous system should be complimented with a horizontally mounted spring, inside the buoy, to lessen the loads on the motor.
The statistical analysis found the largest extremes in water level of the three sites to be at Kungsvik and Kungsholmsfort, both exhibiting a range of almost 1.6 m. Kungsvik was the station with the largest daily variations, this is because this is the only station influenced by tidal variations.
Thies, Philipp Rudolf. « Advancing reliability information for Wave Energy Converters ». Thesis, University of Exeter, 2012. http://hdl.handle.net/10036/4053.
Texte intégralSavin, Andrej. « Experimental Measurement of Lateral Force in a Submerged Single Heaving Buoy Wave Energy Converter ». Doctoral thesis, Uppsala universitet, Elektricitetslära, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-159519.
Texte intégralMacleod, Adrian K. A. « The role of marine renewable energy structures and biofouling communities in promoting self-sustaining populations of non-native species ». Thesis, University of the Highlands and Islands, 2013. https://pure.uhi.ac.uk/portal/en/studentthesis/the-role-of-marine-renewable-energy-structures-and-biofouling-communities-in-promoting-selfsustaining-populations-of-nonnative-species(0c7f0d89-74e8-4468-83c9-4216e4f2b1a8).html.
Texte intégralDa, Pra Elisabetta. « Modellazione degli ancoraggi del dispositivo Resen Wave Buoy con il software DualSPHysics ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Trouver le texte intégralParedes, Guilherme Moura. « Study of Mooring Systems for Offshore Wave Energy Converters ». Doctoral thesis, 2016. https://repositorio-aberto.up.pt/handle/10216/86616.
Texte intégralParedes, Guilherme Moura. « Study of Mooring Systems for Offshore Wave Energy Converters ». Tese, 2016. https://repositorio-aberto.up.pt/handle/10216/86616.
Texte intégralYu, Chi-Hsiung, et 余基雄. « A Study on the Mooring Design of Wave Energy Converters ». Thesis, 2011. http://ndltd.ncl.edu.tw/handle/26983412481720876128.
Texte intégral國立臺灣海洋大學
海洋環境資訊學系
99
The thesis works on the study of cable dynamic of the mooring system of floating wave energy converter. Mooring layout with various anchor angles, mooring lines, and mooring cable lengths were evaluated. This study tries to understand the surge and heave motions, pitch angle and mooring line tension of different layout. ANYSYS was used for the analysis in temporal domain. A mean Influence Factor (IF) was developed to study the influence level of various mooring layout. It was found that the length of mooring system plays the crucial factor. The influence of the length of mooring system on the motions and tension is higher than the influences from mooring number and mooring angle. In addition, it was also found that all the vertical motion, horizontal motion and maxima rotation angle of the energy converter device have positive proportion with the length of mooring system. Since the safety and stability should be both considered for a reasonable mooring design and they are dependent, a cost function was defined to assess the best design of mooring system. The result shows that the mooring system with three mooring lines, 1.1 times of the tight cable length, and with a 30 degree mooring angle is the best choice within the 36 mooring layouts in this study.
Ortiz, Juan Pablo. « The influence of mooring dynamics on the performance of self reacting point absorbers ». Thesis, 2016. http://hdl.handle.net/1828/7339.
Texte intégralGraduate
0346
0537
0548
0547
jortiz@uvic.ca
Elhanafi, ASSM. « Performance and survivability of offshore oscillating water column wave energy converters ». Thesis, 2017. https://eprints.utas.edu.au/23971/2/Elhanafi_whole_thesis_ex_pub_mat.pdf.
Texte intégralBae, Yoon Hyeok. « Coupled Dynamic Analysis of Multiple Unit Floating Offshore Wind Turbine ». Thesis, 2013. http://hdl.handle.net/1969.1/149465.
Texte intégral