Littérature scientifique sur le sujet « Energy Mooring »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Energy Mooring ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Energy Mooring"
Nielsen, Kim, et Jonas Thomsen. « KNSwing—On the Mooring Loads of a Ship-Like Wave Energy Converter ». Journal of Marine Science and Engineering 7, no 2 (1 février 2019) : 29. http://dx.doi.org/10.3390/jmse7020029.
Texte intégralXue, Gang, Jian Qin, Zhenquan Zhang, Shuting Huang et Yanjun Liu. « Experimental Investigation of Mooring Performance and Energy-Harvesting Performance of Eccentric Rotor Wave Energy Converter ». Journal of Marine Science and Engineering 10, no 11 (18 novembre 2022) : 1774. http://dx.doi.org/10.3390/jmse10111774.
Texte intégralCross, Patrick, et Krishnakumar Rajagopalan. « Wave Energy Converter Deployments at the Navy's Wave Energy Test Site : 2015‐2019 ». Marine Technology Society Journal 54, no 6 (1 novembre 2020) : 91–96. http://dx.doi.org/10.4031/mtsj.54.6.8.
Texte intégralNwaoha, Thaddeus C., et Nsisong E. Udosoh. « Facilitating optimal operations of wave energy converter using a preeminent mooring line : an entropy weight-VIKOR method ». Journal of Mechanical and Energy Engineering 6, no 1 (1 juillet 2022) : 77–84. http://dx.doi.org/10.30464/jmee.2022.6.1.77.
Texte intégralQiao, Dongsheng, Rizwan Haider, Jun Yan, Dezhi Ning et Binbin Li. « Review of Wave Energy Converter and Design of Mooring System ». Sustainability 12, no 19 (7 octobre 2020) : 8251. http://dx.doi.org/10.3390/su12198251.
Texte intégralMeng, Zhongliang, Yanjun Liu, Jian Qin et Shumin Sun. « Mooring Angle Study of a Horizontal Rotor Wave Energy Converter ». Energies 14, no 2 (9 janvier 2021) : 344. http://dx.doi.org/10.3390/en14020344.
Texte intégralMeng, Zhongliang, Yanjun Liu, Jian Qin et Shumin Sun. « Mooring Angle Study of a Horizontal Rotor Wave Energy Converter ». Energies 14, no 2 (9 janvier 2021) : 344. http://dx.doi.org/10.3390/en14020344.
Texte intégralQiao, Dongsheng, et Jinping Ou. « Mooring Line Damping Estimation for a Floating Wind Turbine ». Scientific World Journal 2014 (2014) : 1–10. http://dx.doi.org/10.1155/2014/840283.
Texte intégralCai, Yuanzhen, Milad Bazli, Asanka P. Basnayake, Martin Veidt et Michael T. Heitzmann. « Composite Springs for Mooring Tensioners : A Systematic Review of Material Selection, Fatigue Performance, Manufacturing, and Applications ». Journal of Marine Science and Engineering 10, no 9 (12 septembre 2022) : 1286. http://dx.doi.org/10.3390/jmse10091286.
Texte intégralLiu, Shi, Yi Yang, Chengyuan Wang, Yuangang Tu et Zhenqing Liu. « Proposal of a Novel Mooring System Using Three-Bifurcated Mooring Lines for Spar-Type Off-Shore Wind Turbines ». Energies 14, no 24 (9 décembre 2021) : 8303. http://dx.doi.org/10.3390/en14248303.
Texte intégralThèses sur le sujet "Energy Mooring"
Parish, David Nigel. « A novel mooring tether for highly dynamic offshore applications ». Thesis, University of Exeter, 2015. http://hdl.handle.net/10871/21337.
Texte intégralGordelier, Tessa Jane. « Enhancing wave energy deployments through mooring system reliability assessment ». Thesis, University of Exeter, 2016. http://hdl.handle.net/10871/24917.
Texte intégralCAGNINEI, ANDREA. « Hull and mooring design of gyroscopic-based wave energy converter ». Doctoral thesis, Politecnico di Torino, 2015. http://hdl.handle.net/11583/2615515.
Texte intégralHarnois, Violette. « Analysis of highly dynamic mooring systems : peak mooring loads in realistic sea conditions ». Thesis, University of Exeter, 2014. http://hdl.handle.net/10871/17205.
Texte intégralWang, Mingming. « A durable mooring system for a winch-based wave energy converter ». Thesis, KTH, Maskinkonstruktion (Inst.), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209484.
Texte intégralProjektet har behandlat utvecklingen av en ny teknik för en förnybar energikälla, vågenergin, som anses vara en av de mest lovande förnybara resurserna med potential att bidra till en energiproduktion som motsvarar cirka 10 procent av världens energiförbrukning . Ett punktabsorberande koncept som använder en kraftuttagsenhet (PTO) omvandlar havsytans vågsrörelser till elektricitet. På grund av hårda arbetsförhållanden ger underhållsarbete stora problem och ett förtöjningssystem behöver utvecklas. Syftet med detta projekt är att utforma ett hållbart förtöjningssystem för minst 20 års drift, även i en hård havsmiljö. En geometrisk modell av förtöjningssystemet har skapats baserad på dimensionering av dess komponenter. Flera koncept genererades och utvärderades med en Pugh-matris. En simulering av de olika spänningar som påverkar systemets prestanda gjordes för att validera designen. Dessutom har detaljkonstruktion av de olika delarna av systemet gjorts, så att de kan tillverkas i ett framtida arbete.
Ransley, Edward Jack. « Survivability of wave energy converter and mooring coupled system using CFD ». Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3503.
Texte intégralPASSIONE, BIAGIO. « Hydrodynamic analysis and mooring design of a floating pitching Wave Energy Converter ». Doctoral thesis, Politecnico di Torino, 2018. http://hdl.handle.net/11583/2714195.
Texte intégralHealy, Strömgren William. « Automatic Adjustment of the Floatation Level for a Tight-moored Buoy ». Thesis, Uppsala University, Department of Earth Sciences, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-88883.
Texte intégralDenna rapport ger förslag på olika metoder att automatiskt justera flytläget på en statiskt förankrad boj, en överblick över de processer som styr ändringen av vattennivån och en statisktisk analys på vattennivåförändringarna vid Stockholm, Kungsholmsfort och Kungsvik.
Beroende på vattenivåns variation finns olika metoder för justering. Områden med små variationer av vattennivå lämpar det sig bäst utan någon som helst justering av flytläget. Områden med inte för stora tidvattensförändringar bör justeras med ett system bestående av vinsch, växellåda med en utväxling på 10 000:1, en 12 V DC motor, ett skötselfritt 12 V batteri, en luftlindad linjärgenerator och en trådtöjningsgivare. Områden med stora variationer i tidvatten behöver en avlastning för motorn i form av en fjäder och dämpare. De monteras horizontellt inuti bojen för att skyddas från den yttre miljön.
Den statistiska analysen påvisade de största vattennivåändringarna vid både Kungsviks och Kungsholmsforts mätstationer, båda uppvisade ett intervall på 1,6 m mellan minimum och maximum. Kungsvik var den station med de största dagliga variationerna, detta på grund av tidvattnets påverkan i området.
This thesis gives examples of different methods of automated adjustment of floatation level for a static moored buoy, an overview of the theories behind water level change and a statistical analysis of the water level changes for Stockholm, Kungsholmsfort and Kungsvik.
Depending on the range and frequency of the water level change different methods of adjustment are recommended. For areas with small changes in sea level the best choice would be no adjustment of the floatation level. Areas that are influenced by moderate tidal ranges should incorporate a system of regulation consisting of a winch, gearbox with a gear ratio of around 10,000:1, 12 V DC motor, 12 V maintenance free battery, air coiled linear generator and a strain gauge. For areas with large tidal ranges the previous system should be complimented with a horizontally mounted spring, inside the buoy, to lessen the loads on the motor.
The statistical analysis found the largest extremes in water level of the three sites to be at Kungsvik and Kungsholmsfort, both exhibiting a range of almost 1.6 m. Kungsvik was the station with the largest daily variations, this is because this is the only station influenced by tidal variations.
Thies, Philipp Rudolf. « Advancing reliability information for Wave Energy Converters ». Thesis, University of Exeter, 2012. http://hdl.handle.net/10036/4053.
Texte intégralSavin, Andrej. « Experimental Measurement of Lateral Force in a Submerged Single Heaving Buoy Wave Energy Converter ». Doctoral thesis, Uppsala universitet, Elektricitetslära, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-159519.
Texte intégralLivres sur le sujet "Energy Mooring"
Henriksen, Henrich. Typical power budget and possible energy source for Autonomous Oceanographic Network (AOSN) Labrador Sea Experiment (LSE). [Woods Hole, Mass.] : Woods Hole Oceanographic Institution, 1996.
Trouver le texte intégralLevy-Ryan, Ellen. Moored current meter and temperature-pressure recorder measurements from the western North Atlantic (high energy benthic boundary layer and abyssal circulation experiments 1983-1984) : Volume XXXIX. Woods Hole, Mass : Woods Hole Oceanographic Institution, 1986.
Trouver le texte intégralChapitres de livres sur le sujet "Energy Mooring"
Bergdahl, Lars. « Mooring Design for WECs ». Dans Handbook of Ocean Wave Energy, 159–202. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39889-1_7.
Texte intégralBelzner, Fabian, Carsten Thorenz et Mario Oertel. « A Modernized Safety Concept for Ship Force Evaluations During Lock Filling Processes ». Dans Lecture Notes in Civil Engineering, 271–80. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_24.
Texte intégralGao, Zhen. « Mooring System of Renewable Energy Devices ». Dans Encyclopedia of Ocean Engineering, 1–6. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-10-6963-5_199-1.
Texte intégralShao, X., J. W. Ringsberg, H. D. Yao, Z. Li et E. Johnson. « Fatigue of mooring lines in wave energy parks ». Dans Advances in the Analysis and Design of Marine Structures, 205–11. London : CRC Press, 2023. http://dx.doi.org/10.1201/9781003399759-23.
Texte intégralLesny, Kerstin, et Matthias Uchtmann. « Suitability of Helical Anchors for Mooring a Wave Energy Converting System ». Dans Lecture Notes in Civil Engineering, 498–503. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2306-5_70.
Texte intégralLi, Mingjun, Xinhui Duan, Zheng Huang et Yan Wei. « Design of Wave Energy Capture Structure and Research on Mooring System ». Dans Lecture Notes in Civil Engineering, 255–62. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5217-3_25.
Texte intégralKawakami, H. « The Use of Marine Fenders as Energy Absorbing Damper Units in Mooring Systems ». Dans Advances in Berthing and Mooring of Ships and Offshore Structures, 474–90. Dordrecht : Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-1407-0_33.
Texte intégralTryde, Per. « Experimental and Theoretical Investigation of an Advanced Fender/ Mooring System Based on Energy Absorbing Principles ». Dans Advances in Berthing and Mooring of Ships and Offshore Structures, 457–58. Dordrecht : Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-1407-0_30.
Texte intégralRony, J. S., D. Karmakar et C. Guedes Soares. « Dynamic response analysis of a combined wave and wind energy platform under different mooring configuration ». Dans Trends in Maritime Technology and Engineering Volume 2, 477–87. London : CRC Press, 2022. http://dx.doi.org/10.1201/9781003320289-50.
Texte intégralHayton, Mark. « Marine Electrification is the Future : A Tugboat Case Study ». Dans Lecture Notes in Civil Engineering, 868–79. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_77.
Texte intégralActes de conférences sur le sujet "Energy Mooring"
Flory, John F., Stephen J. Banfield, Isabel M. L. Ridge, Ben Yeats, Tom Mackay, Pengzhu Wang, Tim Hunter, Lars Johanning, Manuel Herduin et Peter Foxton. « Mooring systems for marine energy converters ». Dans OCEANS 2016 MTS/IEEE Monterey. IEEE, 2016. http://dx.doi.org/10.1109/oceans.2016.7761007.
Texte intégralVicente, Pedro C., Anto´nio F. O. Falca˜o et Paulo A. P. Justino. « Optimization of Mooring Configuration Parameters of Floating Wave Energy Converters ». Dans ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-49955.
Texte intégralCribbs, A. R., G. R. Kärrsten, J. T. Shelton, R. S. Nicoll et W. P. Stewart. « Mooring System Considerations for Renewable Energy Standards ». Dans Offshore Technology Conference. Offshore Technology Conference, 2017. http://dx.doi.org/10.4043/27870-ms.
Texte intégralMcEvoy, Paul, et Eve Johnston. « Polymer Mooring Component for Offshore Renewable Energy ». Dans Offshore Technology Conference. Offshore Technology Conference, 2019. http://dx.doi.org/10.4043/29587-ms.
Texte intégralTom, Joe G., Dirk P. Rijnsdorp, Raffaele Ragni et David J. White. « Fluid-Structure-Soil Interaction of a Moored Wave Energy Device ». Dans ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-95419.
Texte intégralLi, Yixuan. « The design and analysis of mooring system ». Dans MATERIALS SCIENCE, ENERGY TECHNOLOGY, AND POWER ENGINEERING I : 1st International Conference on Materials Science, Energy Technology, Power Engineering (MEP 2017). Author(s), 2017. http://dx.doi.org/10.1063/1.4982469.
Texte intégralLiu, Yating. « The design of the mooring system ». Dans 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017). Paris, France : Atlantis Press, 2017. http://dx.doi.org/10.2991/msmee-17.2017.145.
Texte intégralJiang, Changqing, Ould el Moctar, Thomas E. Schellin et Guilherme Moura Paredes. « Motion Decay Simulations of a Moored Wave Energy Converter ». Dans ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/omae2020-18424.
Texte intégralAngelelli, Elisa, Barbara Zanuttigh, Luca Martinelli et Francesco Ferri. « Physical and Numerical Modelling of Mooring Forces and Displacements of a Wave Activated Body Energy Converter ». Dans ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23794.
Texte intégralNicholls-Lee, Rachel, Adam Walker, Simon Hindley et Richard Argall. « Coupled Multi-Phase CFD and Transient Mooring Analysis of the Floating Wave Energy Converter OWEL ». Dans ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-10667.
Texte intégralRapports d'organisations sur le sujet "Energy Mooring"
Garavelli, Lysel. 2020 State of the Science Report, Chapter 8 : Encounters of Marine Animals with Marine Renewable Energy Device Mooring Systems and Subsea Cables. Office of Scientific and Technical Information (OSTI), septembre 2020. http://dx.doi.org/10.2172/1633184.
Texte intégral