Thèses sur le sujet « Energetic evaluation »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Energetic evaluation ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.
Rosyid, Oo Abdul. « System analytic safety evaluation of the hydrogen cycle for energetic utilization ». [S.l.] : [s.n.], 2006. http://deposit.ddb.de/cgi-bin/dokserv?idn=980572371.
Texte intégralThunyiswa, Nomahlubi Nomahlubi. « Evaluation of velocity interferometry for high energetic materials using a VISAR ». Diss., University of Pretoria, 2020. http://hdl.handle.net/2263/77888.
Texte intégralDissertation (MSc)--University of Pretoria, 2020.
Physics
MSc
Unrestricted
Zhu, Jin-Qian. « Evaluation of the energetic contribution from gut fermentation in growing pigs ». Thesis, University of Aberdeen, 1988. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU016517.
Texte intégralEhtiwesh, Ismael Alagili Sassi. « Exergetic, energetic, economic and environmental evaluation of concentrated solar power plants in Libya ». Doctoral thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/15882.
Texte intégralThe PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.
O projeto de Doutoramento aborda o potencial de usar centrais de energia solar concentrada (CSP) como um sistema de produção de energia alternativa disponível na Líbia. Uma análise nas vertentes exergética, energética, económica e ambiental foi realizada para um tipo particular destas centrais – um sistema de 50 MW com receção parabólica, porém ela é suficientemente geral para ser aplicada a outras configurações. A originalidade do estudo, para além da modelação e análise da configuração selecionada encontra-se na utilização do estado da arte em termos da análise exergética combinada com a avaliação do ciclo de vida (LCA). A modelação e simulação da central CSP selecionada são efetuadas no terceiro capítulo tendo em consideração as duas componentes: ciclo de potência e campo de coletores solar. O modelo computacional para a análise do sistema foi desenvolvido com base em equações algébricas que descrevem o sistema, e que são resolvidas usando o software EES. Deste modo, são definidas as propriedades em cada ponto de interesse para os diferentes elementos do sistema, o que assim permite determinar as energias, eficiências e irreversibilidades desses elementos. O modelo desenvolvido tem o potencial de se tornar uma ferramenta de grande utilidade para o projeto preliminar de engenharia de centrais CSP, e também para a avaliação da eventual reconfiguração de centrais elétricas solares comerciais em operação. Além disso, o modelo pode ser utilizado no estudo de viabilidade da operação de centrais CSP, através da análise energética, económica e ambiental, para regiões diferentes da que foi escolhida no presente estudo -Trípoli (Líbia). O cenário total da viabilidade da operação da central CSP é completado através da análise horária com base anual apresentada no quarto capítulo. Esta análise permite a comparação de diferentes sistemas e, eventualmente permite fazer a seleção com base nas componentes económicas e energéticas, que são determinadas dentro do contexto do software greenius. A análise também toma em conta o impacto de financiamento e incentivos dados aos projetos no custo da produção de energia. O principal resultado desta análise é a verificação que o desempenho é mais elevado, com o consequente menor custo nivelado da eletricidade, para a Líbia em comparação com o Sul da Europa (Espanha). Assim a Líbia tem o potencial de se tornar um candidato atrativo para o estabelecimento de centrais CSP com o objetivo, como foi considerado em várias iniciativas europeias, de exportar eletricidade gerada através de fontes de energia renováveis de países do Norte de África e Médio Oriente para a Europa. A análise apresenta uma breve revisão do custo corrente da eletricidade e o potencial para reduzir o custo da energia a partir da tecnologia de receção parabólica de centrais CSP. A avaliação do ciclo de vida com base exergética (ELCA) e a avaliação do ciclo de vida convencional são realizadas para a centrais CSP específicas no quinto capítulo. Os objetivos são 1) avaliar o impacto ambiental e custo, em termos de do ciclo iv de vida exergético do sistema; 2) identificar pontos fracos em termos da irreversibilidade dos processos; e 3) verificar se as centrais CSP podem reduzir o impacto ambiental e o custo de geração de eletricidade em comparação com centrais que consomem combustível fóssil. O capítulo ainda apresenta uma análise termoeconómica com base na metodologia do custo específico da exergia (SPECO), que avalia o custo relacionado com a destruição de exergia. A análise verificou que o impacto mais importante é a contribuição apresentada pelo campo solar (79%), e os materiais com maior impacto são: aço (47%), sal fundido (25%) e óleo sintético (21%). A análise ELCA mostra que a maior demanda de exergia é devida ao aço (47%); a análise existe uma considerável demanda de exergia relacionada com o sal fundido e ainda o óleo sintético. Em comparação com as centrais que consomem combustível fóssil (NGCC e óleo) a central sistema CSP apresenta menor impacto ambiental, enquanto o pior desempenho ambiental é o da central com queima de óleo seguida pela central a gás natural (NGCC). Na central CSP, o campo solar apresenta o custo mais elevado, enquanto o gerador de vapor, entre os componentes do ciclo de potência, apresenta o maior custo. O armazenamento de energia térmica permite que as centrais CSP superem a intermitência de radiação solar para responder à procura de energia elétrica independentemente das condições climáticas, e também possam estender a produção de eletricidade para além da disponibilidade da radiação solar diária. A análise numérica do transiente térmico de um sistema de armazenamento de gradiente térmico é realizada durante a fase de carregamento. O sistema de equações que descreve o modelo numérico é resolvido através da utilização de diferenças finitas implícitas no tempo usando o software Matlab. Os resultados da análise indicam que as previsões estão em boa concordância com os dados experimentais para a evolução no tempo da região de gradiente térmico, em particular para regiões mais afastadas da entrada. Nesta região os desvios observados são provavelmente causados pelo alto nível de turbulência devido à penetração do jato no seio do tanque de armazenamento. O modelo analítico simples para simular a turbulência que foi desenvolvido melhora os resultados. Esta abordagem não requer esforço computacional adicional e determina a difusidade térmica efetiva ao longo do tanque.
Castrillon, Posada Juliana. « Development of Non-lethal Methods for the Evaluation of Energetic Reserves in Humpback Whales (Megaptera novaeangliae) ». Thesis, Griffith University, 2019. http://hdl.handle.net/10072/386540.
Texte intégralThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Environment and Sc
Science, Environment, Engineering and Technology
Full Text
Oexmann, Jochen [Verfasser]. « Post-combustion CO2 capture : energetic evaluation of chemical absorption processes in coal-fired steam power plants / Jochen Oexmann ». Hamburg : Universitätsbibliothek der TU Hamburg-Harburg, 2011. http://d-nb.info/1012653196/34.
Texte intégralFerrer, i. Martí Ivet. « Study of the effect of process parameters on the thermophilic anaerobic digestion of sewage sludge, evaluation of a thermal sludge pre-treatment and overall energetic assessment ». Doctoral thesis, Universitat Autònoma de Barcelona, 2008. http://hdl.handle.net/10803/5323.
Texte intégralL'objecte d'aquesta Tesi Doctoral fou estudiar l'impacte dels paràmetres del procés en la digestió anaeròbia termofílica dels fangs de depuradora urbana, avaluar l'efecte del pre-tractament tèrmic dels fangs a baixa temperatura, i valorar processos alternatius des del punt de vista energètic.
Els resultats experimentals presentats s'obtingueren mitjançant l'operació de dos reactors de laboratori durant prop de dos anys. En aquest període es va estudiar l'efecte de la temperatura del procés, del temps de retenció dels fangs (TRF), de la velocitat de càrrega orgànica (VCO) i del pre-tractament a 70 ºC en la digestió anaeròbia dels fangs de depuradora. El procés fou avaluat en termes de la producció d'energia (biogàs i metà) i de la qualitat del fang digerit (contingut de SV i d'àcids grassos volàtils (AGV), facilitat de deshidratació i higienització). S'analitzà l'estabilitat del procés a mesura que es reduïa el TRF i s'incrementava la VCO, i es comparà l'eficiència en períodes d'estabilitat corresponents a les diferents condicions operacionals. Finalment, s'avaluaren els resultats des del punt de vista energètic, mitjançant el càlcul de balanços i ratis energètics teòrics, que es compararen amb els resultats obtinguts a partir de dades experimentals d'altres estudis. També s'utilitzà un model cinètic de primer ordre. Les conclusions que es desprenen d'aquest treball es resumeixen a continuació:
Durant la digestió anaeròbia dels fangs, la transició d'un reactor mesophilic (43 ºC) a termofílic (50 ºC) es podria dur a terme sense alterar el procés, treballant a TRF elevats (≥ 30 dies) i VCO baixes (≤ 0.5 kg SV m-3reactor d-1). En aquestes condicions, les principals diferències entre reactors termofílics (50-55 ºC) i mesofílics (38-43 ºC) fan referència a una certa acumulació d'AGV (0.5-2.5 g L-1) i millora de la destrucció de patògens (E. coli ≤ 102 UFC mL-1). La digestió termofílica a 50 ºC i 55 ºC dóna lloc a resultats similars pel que fa a la producció de biogàs, estabilització, higienització i facilitat de deshidratació de l'efluent, si no varien els altres paràmetres operacionals.
La producció de metà tendeix a incrementar proporcionalment a la VCO, és a dir al TRF i el contingut de SV als fangs alimentats. Així mateix, la qualitat de l'efluent (contingut de SV i AGV, facilitat de deshidratació dels fangs) també depèn de la VCO. D'acord amb els resultats obtinguts a 55 ºC, la producció de metà s'incrementà 2-3 vegades (de 0.2 a 0.4-0.6 m3CH4 m3reactor d-1) en disminuir el TRF de 30 a 15-10 dies, incrementant la VCO de 0.5 a 2.5-3.5 kg SV m3reactor d-1. En canvi, el procés es desestabilitzà amb la reducció del TRF a 6 dies i VCO per sobre de 5 kg SV m3reactor d-1. Les següents concentracions poden ser útils per detectar i prevenir la desestabilització d'un digestor termofílic de fangs: AGV totals
(2.5 g L-1), acetat (0.5 g L-1), rati acetat/propionat (0.5), alcalinitat intermèdia (1.8 g CaCO3 L-1), rati alcalinitat intermèdia/alcalinitat parcial (0.9), rati alcalinitat intermèdia/alcalinitat total (0.5), contingut de metà al biogàs (55 %).
El pre-tractament a 70 ºC afavoreix la solubilització dels fangs, incrementant la proporció de matèria orgànica soluble respecte la matèria orgànica total del 5 % al 50 % en 9-24 h; seguit d'una progressiva generació d'AGV després de 24h. Durant la subseqüent digestió anaeròbia de fangs pre¬tractats (9-48 h), s'incremetà la producció de biogàs en un 30-40 %, treballant a 55 ºC i 10 dies de TRF. El rendiment de producció de biogàs fou un 30 % superior amb fangs pre-tractats (0.28-0.30 vs. 0.22 L·gVS¬1) i el contingut de metà al biogàs també fou superior (69 % vs. 64 %).
La digestió anaeròbia termofílica de fangs pot donar lloc a una producció neta d'energia, durant estacions fredes i càlides, si s'utilitzen reactors amb aïllament tèrmic de les parets i amb recuperació energètica a partir del biogàs i dels fangs digerits. En aquest cas, l'eficiència energètica de reactors termofílics treballant a la meitat de TRF (10-15 dies) que reactors mesofílics (20-30 dies) seria similar, per la qual cosa el cabal diari podria ser doblat, o el volum del reactor reduït, amb el conseqüent estalvi en el cost de tractament dels fangs. A més, un sistema en dues etapes (70/55 ºC) produiria més energia neta que un sistema en una sola etapa (55 ºC) amb un TRF de 10 dies. De totes maneres, la quantitat d'energia neta generada augmenta amb el volum del digestor donat que, malgrat la disminució en la producció de metà a TRF creixents, la producció d'energia segueix essent superior al consum, i per tant com més quantitat de fangs hi hagi al digestor, més energia es produirà.
Energy consumption accounts for some 30 % of the total operating costs of intensive sewage treatment systems. In conventional wastewater treatment plants employing an activated sludge process, around 15-20 % of this energy is used in the sludge treatment line, including sludge pumping, thickening, stabilisation and dewatering. Therefore, optimisation of sludge management can substantially contribute in the reduction of wastewater treatment costs. Thermophilic anaerobic digestion is more efficient than mesophilic anaerobic digestion, in terms of biogas production, volatile solids (VS) removal and pathogens destruction. The process might be further accelerated by sludge pre-treatment, promoting sludge solubilization and hydrolysis.
The aim of this PhD Thesis was to study the impact of process parameters on the thermophilic anaerobic digestion of sewage sludge, to evaluate the effect of implementing a low temperature pre¬treatment step, and to assess alternative processes from an energy perspective.
The experimental results presented were obtained by operating two lab-scale reactors for almost two years. During this period, the effect of process temperature, sludge retention time (SRT), organic loading rate (OLR) and 70 ºC sludge pre-treatment on the anaerobic digestion of sewage sludge was studied. The process was evaluated in terms of energy production (i.e. biogas and methane production) and the quality of the effluent sludge (i.e. VS and volatile fatty acids (VFA) content, sludge dewaterability and hygienisation). Focus was put on the stability of the process at decreasing SRT and increasing OLR. Process efficiency during stable performance under each operating condition assayed was compared. Finally, the results were assessed from an energy perspective, by means of theoretical energy balances and ratios; and compared to the results obtained with experimental data from other studies. A first order kinetic model was also used. The conclusions drawn from the different issues dealt in this work are summarised as follows:
During anaerobic sludge digestion, the transition from a mesophilic (43 ºC) to a thermophilic operation (50 ºC) may be carried out without disturbing the process, by operating the reactors at high SRT ( ≥ 30 days) and low OLR (≤ 0.5 kg VS m-3reactor d-1). Under such conditions, some VFA accumulation (0.5-2.5 g L-1) and enhanced pathogen destruction (residual E. coli ≤ 102 CFU mL-1) would be the main differences of thermophilic (50-55 ºC) compared to mesophilic (38-43 ºC) reactors. Thermophilic sludge digestion at 50 ºC and 55 ºC should be similar in terms of biogas production and effluent stabilisation, hygienisation and dewaterability; provided that other process parameters are the same.
Methane production rate tends to increase proportionally to the OLR, thus to the SRT and VS concentration in the feed sludge. Similarly, the quality of the effluent sludge (VS content, VFA content and sludge dewaterability) is also affected by the OLR. According to the results obtained at 55 ºC, methane production rate increased by 2-3 times (from 0.2 to 0.4-0.6 m3CH4 m3reactor d-1) by decreasing the SRT from 30 to 15-10 days; increasing the OLR from 0.5 to 2.5-3.5 kg VS m3reactor d-1. However, process unbalance resulted from SRT reduction to 6 days, with OLR above 5 kg VS m3reactor d-1. The following concentrations might be useful to detect and prevent digester failure during thermophilic sludge digestion: total VFA (2.5 g L-1), acetate (0.5 g L-1), acetate/propionate ratio (0.5), intermediate alkalinity (1.8 g CaCO3 L-1), intermediate alkalinity/partial alkalinity ratio (0.9), intermediate alkalinity/total alkalinity ratio (0.5), methane content in biogas (55 %).
The 70 ºC sludge pre-treatment may initially promote sludge solubilization, increasing the concentration of soluble to total organic matter from 5 to 50 % within 9-24 h; which is followed by a progressive VFA generation after 24 h. Subsequent anaerobic digestion of pre-treated sludge samples (9¬48 h) could increase biogas production by 30-40 % working at 55 ºC with a SRT of 10 days. Biogas yield is some 30 % higher with pre-treated sludge (0.28-0.30 vs. 0.22 L·gVSfed-1) and methane content in biogas is also higher with pre-treated sludge (69 vs. 64 %).
Thermophilic anaerobic sludge digestion would result in net energy production, during cold and warm seasons, provided that digesters with wall insulation and with energy recovery from both the biogas produced and the effluent sludge are used. In this case, the energetic efficiency would be similar for thermophilic digesters working at half the SRT (10-15 days) of mesophilic digesters (20-30 days), meaning that the sludge daily flow rate could be doubled, or the reactor volume reduced, with subsequent savings in terms of sludge treatment costs. Furthermore, two-stage systems (70/55 ºC) may result in higher net energy production compared to single-stage systems (55 ºC) at 10 days SRT. However, the amount of surplus energy generated increases with digester volume. In spite of the decrease in methane production rate at increasing SRT, energy production is still higher than energy consumption, and therefore the bigger the amount of sludge in the digester, the higher the energy production.
Garacci, Marion. « Evaluation de la réponse cellulaire et moléculaire d'une diatomée benthique d'eau douce à l'exposition à des nanoparticules carbonées ». Thesis, Toulouse 3, 2018. http://www.theses.fr/2018TOU30250/document.
Texte intégralDifferent approaches were used to assess the effect of two forms of carbon-based nanoparticles (CNP) nanotubes and graphene, in order to determine the mechanism of the response generated by the benthic freshwater diatom Nitzschia palea. The effect at the cellular community scale demonstrated a temporary impact on biofilm growth and an accumulation of NPC in the extracellular matrix. The use of transcriptomic study evidenced the role of the physic interaction, causing alteration of the frustule, in the extracellular response leading to an overexcretion of exopolymeric substances (EPS). This approach also revealed the impact of NPC on the photosynthetic activity of diatoms and a modification of the energetic metabolism suggesting an energetic allocation for the EPS production. The study of the extracellular proteome allowed to have a first insight of the extracellular matrix composition, in majority composed of hydrophobic-like proteins. In NPC exposure, diatoms seemed to produce an adhesive system allowing to strengthen the extracellular matrix and increase the biofilm stability while trapping NPC. The exposition of diatoms to the two NPC forms induce a response greatly similar for the highest tested concentration
Šicová, Pavlína. « Energetické hodnocení krasobruslařské haly ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227857.
Texte intégralMidgley, B. « Evaluation of adhesion energetics involving low surface energy films ». Thesis, University of Bradford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373227.
Texte intégralSýkorová, Iva. « Energetické hodnocení budov ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225580.
Texte intégralVerner, Tomáš. « Energetický audit bioplynové stanice ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225513.
Texte intégralRulíšková, Pavla. « Energetická optimalizace polyfunkčního objektu ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226835.
Texte intégralKouklík, Michal. « Zhodnocení investičního záměru dostavby JETE ». Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-199563.
Texte intégralFojtů, Pavel. « Energetické hodnocení obytných budov ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226012.
Texte intégralProcházková, Adéla. « Energetické hodnocení budovy pro občanskou vybavenost obce ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240433.
Texte intégralPernigotto, Giovanni. « Evaluation of building envelope energy performance through extensive simulation and parametrical analysis ». Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3422638.
Texte intégralPiù del 30% degli impieghi finali di energia nell’Unione Europea è dovuto ai consumi energetici degli edifici. Al fine di ridurre il loro impatto energetico e migliorare la loro efficienza, è stata data una sempre maggiore importanza all’attività di progettazione, sia in merito ai nuovi edifici sia per gli interventi di riqualificazione. Inoltre, in aggiunta a questi obiettivi, durante gli ultimi anni le condizioni di comfort nell’ambiente confinato hanno assunto una sempre maggiore significatività per i progettisti edili. Ciò ha richiesto lo sviluppo di strumenti di analisi adeguatamente dettagliati, come i simulatori dinamici dell’edificio. In generale, più è complesso uno strumento, maggiore è il numero di input richiesti ma non tutti sono sempre disponibili nelle fasi iniziali della progettazione. Per questa ragione, i codici di simulazione dinamica sono stati impiegati anche per sviluppare modelli semplificati. Questa ricerca analizza le possibilità date da un uso estensivo della simulazione dinamica per la valutazione delle prestazioni energetiche dell’involucro edilizio e alcune problematiche relative ad essa. Il primo argomento discusso riguarda le condizioni al contorno nella simulazione dinamica, in particolare la definizione di un file climatico rappresentativo per la descrizione dell’ambiente esterno e la modellazione dello scambio di calore attraverso il terreno. Il secondo argomento analizza i problemi della validazione dei risultati forniti dagli strumenti di simulazione dinamica e l’accuratezza introdotta dalla scelta di uno specifico codice. Il confronto tra i software di simulazione dinamica è condotto sia a livello degli output di un’intera zona termica, quali i fabbisogni di riscaldamento e raffrescamento, i carichi di picco e l’istante in cui si verificano, e la risposta di un singolo componente (i.e., le pareti opache e quelle vetrate). Infine, viene studiata la coerenza tra i fabbisogni energetici elaborati dagli strumenti di simulazione dinamica e quelli ottenuti tramite il modello semi-stazionario presentato nella normativa EN ISO 13790:2008 e vengono proposti alcuni fattori correttivi per questo metodo semplificato.
Čajčíková, Jolana. « Energetický audit polyfunkčního objektu ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239943.
Texte intégralRodková, Daniela. « Energeticko-ekonomické hodnocení, a optimalizace, rodinného domu ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372287.
Texte intégralNeugebauer, Reimund, Uwe Götze et Welf-Guntram Drossel. « Energetisch-wirtschaftliche Bilanzierung – Diskussion der Ergebnisse des Spitzentechnologieclusters eniPROD : 3. Methodenband der Querschnittsarbeitsgruppe "Energetisch-wirtschaftliche Bilanzierung" des Spitzentechnologieclusters eniPROD ». Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik (IWU), 2014. https://monarch.qucosa.de/id/qucosa%3A20011.
Texte intégral3rd workbook of the cross-sectional group 'Energy-related technologic and economic evaluation' of the Cluster of Excellence eniPROD
Hlavsa, Tomáš. « Tvorba konceptu energeticky soběstačných obytných budov ». Doctoral thesis, Vysoké učení technické v Brně. Fakulta architektury, 2018. http://www.nusl.cz/ntk/nusl-355648.
Texte intégralBlažková, Blanka. « Zpracování a vyhodnocení dat získaných z prototypu jednotky pro energetické využití biomasy ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228172.
Texte intégralNeugebauer, Reimund, Uwe Götze et Welf-Guntram Drossel. « Energetisch-wirtschaftliche Bilanzierung und Bewertung technischer Systeme – Erkenntnisse aus dem Spitzentechnologiecluster eniPROD : 1. und 2. Methodenworkshop der Querschnittsarbeitsgruppe 1 "Energetisch-wirtschaftliche Bilanzierung" des Spitzentechnologieclusters eniPROD ». Technische Universität Chemnitz, 2013. https://monarch.qucosa.de/id/qucosa%3A19839.
Texte intégralProceedings of the 1st and the 2nd workshop of the cross-sectional group 1 'Energy-related technologic and economic evaluation' of the Cluster of Excellence eniPROD
Giorgini, Niko. « Techno-economic evaluation of Carbon Capture and Sequestration plants ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Trouver le texte intégralDe, Fonseca Pimentel Vittoria. « Technical comparison and economic evaluations of moving grate and circulating fluidized bed combustion technologies ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Trouver le texte intégralChadima, Tomáš. « Analýza vnitřního klimatu lázeňského komplexu ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392187.
Texte intégralFujdiak, Radek. « Analýza a optimalizace datové komunikace pro telemetrické systémy v energetice ». Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-358408.
Texte intégralKrzyžanek, Michal. « Ekonomické hodnocení a analýza rizika stavebních technologií ». Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-11046.
Texte intégralCalabrese, Debora. « Design evaluation of a scaled experiment to investigate natural circulation in MYRRHA ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.
Trouver le texte intégralDI, PILLA LORENZA. « A methodology for evaluating the cost-effectiveness of residential building stocks retrofits in Italy and Denmark ». Doctoral thesis, Università degli Studi di Cagliari, 2014. http://hdl.handle.net/11584/266492.
Texte intégralAdamus, Aleš. « Analýza vlivu zateplení na cenu bytové jednotky v Opavě ». Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232769.
Texte intégralRamos, Tercero Elia Armandina. « LARGE SCALE PRODUCTION OF BIOCRUDE FROM MICROALGAE : EXPERIMENTAL MEASUREMENTS AND PROCESS SIMULATIONS TO ASSESS ITS ECONOMIC VIABILITY ». Doctoral thesis, Università degli studi di Padova, 2015. http://hdl.handle.net/11577/3424656.
Texte intégralI biocarburanti provenienti da biomassa microalgale sono considerati come una delle alternative migliori e più a breve termine per produrre energia pulita. Le microalghe sono microorganismi capaci di convertire l’energia solare in energia chimica che può essere sfruttata come combustibili di diverse tipologie sia liquida sia gassosa. L’obiettivo della ricerca presentata in questa Tesi é di valutare il potenziale della tecnologia per la produzione di olio da microalghe, analizzando diverse alternative e concetti sia in modo sperimentale che tramite simulazioni del processo. Il Capitolo 1 é una discussione introduttiva sulla situazione mondiale delle microalghe, recenti studi e gli ultimi risultati riportati su questa tecnologia. Dal punto di vista sperimentali, nei Capitoli 2 e 3 di questa tesi si sono approfonditi, la coltivazione di microalghe in acque reflue e la capacità che presentano alcune specie di microalghe di crescere in acque reflue non trattate, verificata con la microalga Chlorella protothecoides. La crescita é stata valutata in acque provenienti da diversi step del di trattamento delle acque, per selezionare la stream ottimale per la crescita delle microalghe. Inoltre, é stata testata la efficienza nella rimozione di nutrienti e i tassi di rimozione in acque reflue reali. Nel Capitolo 2 si riportano anche la produzione di biomassa in stato stazionario con alimentazione continua del effluente. Nel Capitolo 3 sono stati studiati gli effetti della temperatura, l’irradiazione in ciclo giorno/notte e la competizione batterica sulla crescita di C. protothecoides, e la rimozione dei nutrienti con l’obiettivo d’integrare entrambe tecnologie in un approccio realistico. É stato infine proposto uno schema modificato dell’impianto di depurazione. Il Capitolo 4 presenta il lavoro sperimentale per la valutazione della capacità di produzione di biogas da microalghe e le loro velocità di degradazione nel processo di digestione anaerobica: sono state testate diverse condizioni come la tipologia del’inoculo batterico e la concentrazione della biomassa algale all’inizio delle prove. Inoltre, questo capitolo riporta anche la ricerca nel recupero del contenuto energetico dalla biomassa residua dopo l’estrazione di olio, dimostrando che il metodo di estrazione dell’olio é un fattore importante. La produzione di biogas e sua corrispondente frazione di metano sono stati testati considerando l’effetto della miscela di solvente usato nella estrazione, e i risultati sono stati confrontati con quelli della biomassa microalgale prima della estrazione. Il Capitolo 5 é focalizzato sulla conversione di biomassa mediante il processo di liquefazione idrotermica (HTL) che viene svolto a temperature tra 200 C e 375 C (la pressione é quella necessaria per mantenere l’acqua in stato liquido), ed é caratterizzato da alte rese. Tuttavia, uno dei sottoprodotti é una fase acquosa con alto contenuto di componenti organici che deve essere trattata adeguatamente per evitare ulteriori costi. In questo capitolo si riporta il lavoro sperimentale svolto con l’obiettivo di recuperare e riutilizzare l’acqua di processo mediante un riciclo nel sistema stesso. Inoltre si é misurato l’effetto della temperatura e del numero di ricicli nelle rese di produzione di olio, gas, residuo solido e la fase acquosa e la composizione dei prodotti. Nel Capitolo 6 si riporta l’analisi energetica del processo per la produzione di biocrudo: lo studio é stato svolto considerando diverse tipologie e condizioni di processo, i quali sono stati modellati e simulati dal simulatore di processo Aspen PlusTM, col fine di verificare e ottimizzare i profitti energetici rispetto all’analisi del EROEI, e di proporre un processo energeticamente autosufficiente. Dei diversi processi studiati per ottenere energia della biomassa quello che utilizza la combustione di biomassa dopo estrazione dell’olio é risultato il più favorevole in termini energetici. In particolare, due casi di questo processo sono stati confrontati con un caso base, variando la provenienza dei requisiti energetici (calore ed elettricità), fornendoli sia da fonti esterne che dal processo steso. In ultimo, nel Capitolo 7 si riporta una valutazione tecnica di un impianto per la produzione di biodiesel da microalghe in cui si propone una nuova configurazione della sezione di crescita, un fotobioreattore ibrido, il Closed Pond Reactor (CPR). L’intero processo é stato simulato Aspen PlusTM e ottimizzato per ottenere i migliori benefici in termini energetici. La progettazione e il dimensionamento delle attrezzature tecnologiche sono stati effettuati per ottenere una stima realistica dei costi, considerando sia CAPEX (costi di capitale) e OPEX (costi operativi). Nell’analisi economica si é valutata, la redditività del processo su scala industriale e sono stati calcolati i prezzi di vendita corrispondenti dell’olio e del biodiesel necessario per rendere la produzione economicamente sostenibile.
Raybaud, Blaise. « Evaluation de l’impact des propriétés optiques large-bande de l’environnement sur le productible (énergie incidente) en milieu urbain ». Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI126.
Texte intégralThe performance of a photovoltaic module is conditioned by the environment in which it is installed. Indeed, the amount of solar energy converted into electricity depends on the incident irradiance on the module. Progress in the integration of photovoltaic modules on buildings and the reduction of their costs leads us to consider the solar potential in urban environments, both on roofs and facades. In an urban environment, the density of buildings limits solar gain on the facade by the presence of masks. Public institutes encourages an increase in the local production of renewable energies. It is therefore necessary to acquire digital tools to accurately assess the solar potential in cities, and thus evaluate the profitability of photovoltaic installations. In particular, it is necessary to evaluate the solar contributions resulting from reflections on the various surfaces that make up the urban scene. Visual integration issues, raising the question of colours and incident spectra on surfaces in different wavelength ranges must also be considered. Finally, these tools must also make it possible to assess the impact of photovoltaic integration in an urban environment in order to avoid reinforcing heat island phenomena. The PhD work is therefore focused on methods for simulating sunshine in an urban environment, through the development of two modelling strategies (radiosity and ray throwing). The simulation models are compared under the hypotheses of equivalent optical reflections, allowing a validation of the hypotheses used in each of the methods. At the same time, a qualification of the optical properties of typical materials from the urban environment allows the construction of optical reflection models based on Bidirectional Reflectivity Distributions Functions (BRDF). These models are integrated into the irradiance models. Therefore, it possible to evaluate the ratio of energy resulting from the different reflection modes. In addition, irradiance measurements are carried out in an external environment. A test bench is designed to measure the irradiances perceived on the facade and on the ground. Different configurations are tested using this mock-up. The measurements obtained are then compared with the numerical results under real conditions, enabling the models to be validated
Mašová, Veronika. « Analýza dlouhodobého hmotného majetku ve vybraných účetních jednotkách ». Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-114087.
Texte intégralČervinka, Michal. « Rekonstrukce rodinného domu ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241887.
Texte intégralOndruška, Vojtěch. « Optimální využití energie a vody v aquaponické farmě ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416637.
Texte intégralSlovák, Rostislav. « Technicko-ekonomické hodnocení systému pro využití odpadního tepla z plynové mikroturbíny ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382622.
Texte intégralPreclík, Vítězslav. « Vytápění mateřské školy tepelným čerpadlem a solárními kolektory s přitápěním do otevřeného koupaliště ». Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217608.
Texte intégralMiczková, Markéta. « Nízkoenergetická mateřská škola ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227531.
Texte intégralMela, Giulio. « Assessing the Economic, Environmental and Social Sustainability of Biofuel Policies ». Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3425833.
Texte intégralDi biocarburanti si iniziò a parlare circa 40 anni fa, in concomitanza con la crisi petrolifera determinata dall’embargo da parte dei paesi OPEC. Il conseguente forte aumento del prezzo del petrolio stimolò infatti la ricerca nel campo delle forme di energia alternative. La produzione di biocarburanti è tuttavia decollata solo di recente, grazie all’azione combinata di molteplici fattori: elevate quotazioni del petrolio, necessità di contenere le emissioni di gas serra e la riduzione delle scorte di combustibili fossili; tutte cose che hanno indotto molti paesi a mettere a punto programmi volti allo sviluppo del settore dei biocarburanti. All’inizio degli anni 2000 i biocarburanti venivano considerati la soluzione ideale per risolvere i problemi dell’approvvigionamento energetico, della stabilità economica (stabilizzazione dei prezzi dell’energia, sviluppo rurale, creazione di posti di lavoro, aumento della domanda di materie prime agricole) e della protezione dell’ambiente (utilizzazione più efficiente dei rifiuti e riduzione delle emissioni di gas serra). Un impulso decisivo allo sviluppo delle politiche fu dato dalla stipula del Protocollo di Kyoto nel quale i paesi firmatari si impegnavano a ridurre le proprie emissioni di gas serra del 5% rispetto ai livelli del 1990 entro il 2012. Al momento attuale i biocarburanti vengono in larga parte prodotti a partire da materie prime agricole, quindi le ripercussioni della loro produzione sul settore agricolo possono essere rilevanti. In tale àmbito appare chiara la forte responsabilità, in termini di effetti sui mercati agricoli mondiali, che hanno i paesi che più di tutti hanno sovvenzionato il settore: Stati Uniti, Brasile e Unione Europea. Tali paesi, tramite le loro politiche, hanno creato un nuovo mercato di sbocco per molte materie prime agricole, senza capire a fondo, a priori, le conseguenze di tale azione. Le principali motivazioni addotte dai decisori politici per giustificare le sovvenzioni al settore dei biocarburanti furono la necessità di ottemperare ai dettami del Protocollo di Kyoto, aumentare l’indipendenza energetica, creare nuovi posti di lavoro, migliorare il reddito degli agricoltori e stabilizzare i prezzi dell’energia. L’espansione del settore dei biofuel è avvenuta non solamente in maniera quantomeno controversa, senza coordinazione a livello internazionale, ma anche in un momento storico molto delicato. Gli ultimi venti anni sono stati infatti caratterizzati da un grande aumento della domanda mondiale di cibo, soprattutto a causa della forte crescita economica dei cosiddetti paesi emergenti: Cina, India, Brasile e paesi del Sud-Est asiatico. Il forte aumento della domanda si scontra contro un’offerta di materie prime agricole giocoforza rigida nel breve termine, cosa che genera forti aumenti di prezzo e della volatilità delle quotazioni (soprattutto a causa del forte ridimensionamento delle scorte). Negli ultimi anni gran parte dell’entusiasmo iniziale nei confronti dei biocarburanti è andato scemando. Per prima cosa l’espansione del settore dei combustibili “verdi” ha aumentato la domanda per molte materie prime agricole che, in un contesto contraddistinto da un forte aumento della domanda mondiale, ha generato un sensibile aumento dei prezzi alimentari, con ripercussioni particolarmente negative per le fasce più povere della popolazione, soprattutto nei paesi meno sviluppati. Anche l’effettiva efficacia dei biocarburanti nel ridurre le emissioni di gas serra è stata fortemente messa in dubbio. Le metodologie utilizzare per il conteggio delle emissioni non sono sempre accurate o di facile attuazione. L’intensivizzazione dei processi agricoli e i cambiamenti d’uso dei suoli, entrambi conseguenza dell’aumento della produzione agricola, sono due fattori che molto probabilmente hanno causato un aumento delle emissioni di gas serra invece che una diminuzione. Inoltre, le politiche a favore del settore delle energie rinnovabili sono state progettate e messe in pratica in maniera spesso unilaterale da parte dei vari paesi, senza quella coordinazione a livello internazionale che sarebbe stata essenziale a evitare le conseguenze negative sui mercati agricoli e sull’ambiente. La mia ricerca di dottorato analizza tutti gli aspetti del settore dei biocarburanti a livello mondiale con particolare attenzione a quelli della sostenibilità: economica, ambientale e sociale. La ricerca inizia con una descrizione delle varie tipologie di biocarburanti attualmente prodotti a livello mondiale e prosegue con una rassegna delle politiche a favore dei biocarburanti nei principali paesi. In séguito vengono analizzate le produzioni, i prezzi e il commercio internazionale di biocarburanti e delle materie prime dalle quali sono ottenuti. I principali paesi produttori di biocarburanti sono gli Stati Uniti, il Brasile e l’Unione Europea. Nei primi due viene prodotto principalmente etanolo (a partire dal mais negli Stati Uniti e dalla canna da zucchero in Brasile), mentre nell’Unione Europea è il biodiesel il biocarburante di riferimento (prodotto a partire da oli vegetali). Nel 2011, il 51,8% della produzione brasiliana di canna da zucchero e il 42,2% di quella statunitense di mais sono state usate per produrre etanolo. Le superfici necessarie, nei due paesi, per la coltivazione della materia prima per la produzione del biocarburante sono state pari a 4,2 e 15,5 milioni di ettari, che rappresentano l’1,5 e il 16% della superficie agricola totale dei due paesi. Nel 2021, ceteris paribus, la produzione di etanolo assorbirà circa il 61% della produzione brasiliana di canna da zucchero e il 57% di quella statunitense di mais. Sempre nel 2021, in Brasile, le superfici necessarie per coltivare canna da zucchero destinata la settore dell’etanolo raggiungeranno gli 8 milioni di ettari, pari a tutta l’area attualmente coltivata a canna da zucchero nel paese sudamericano. Negli Stati Uniti le superfici necessarie a coltivare il granturco per la produzione di etanolo cresceranno fino a sfiorare i 20 milioni di ettari, un’estensione pari al 53% dell’area attualmente investita a mais e al 20% della superficie agricola totale del 2011. Da questi dati è possibile osservare la forte differenza, in termini di impatto sulle produzioni agricole, tra la produzione di etanolo brasiliana (imperniata sulla canna da zucchero) e quella statunitense (basata sul mais). La produzione brasiliana e statunitense di etanolo, nel 2011, è stata rispettivamente di 22,9 e 52,8 milioni di metri cubi, implicando una “resa” in etanolo di 5,5 e 3,4 metri cubi a ettaro. Ciò significa che la produzione di etanolo a partire dalla canna da zucchero è più efficiente in termini di superfici necessarie alla coltivazione della materia prima. Tenendo in considerazione anche il biodiesel, in rapida espansione in entrambi i paesi (dove viene ottenuto a partire dall’olio di soia), l’incidenza percentuale delle superfici utilizzate per coltivare la materia prima per la produzione di biocarburanti (etanolo e biodiesel) cresce fino a raggiungere il 3% del totale della superficie agricola in Brasile e il 18,4% negli Stati Uniti. Tali percentuali sono destinate a raggiungere il 6,3 e il 23% entro il 2021. Nel 2011 l’Unione Europea ha impiegato 5,4 milioni di tonnellate di olio di colza (prodotto all’interno dell’Unione) e almeno 3,9 milioni di olio di palma (importato da Indonesia e Malesia) per produrre biodiesel. Le superfice necessaria, all’interno dell’UE, per la coltivazione della colza usata nel settore dei biocarburanti è stata di 5,2 milioni di ettari nel 2011, mentre quella impiegata per la produzione di olio di palma nei paesi terzi di almeno 1,3 milioni di ettari. Sempre nel 2011, il 5,2% della superficie agricola totale dell’Unione è stato utilizzato per la coltivazione di colza da destinare alla produzione di biocarburanti. Assumendo che la percentuale di olio di colza impiegata nel settore alimentare nell’Unione Europea rimarrà la stessa anche negli anni a venire, è possibile prevedere che, nel 2021, l’UE avrà bisogno di 6,6 milioni di tonnellate di olio di colza e di almeno 10 milioni di tonnellate di olio di palma (importato da paesi terzi) per raggiungere i suoi obiettivi di consumo in materia di biodiesel. Ciò implica che almeno 3,4 milioni di ettari di terreni, presumibilmente in Indonesia e Malesia, saranno necessari per produrre tutto l’olio di palma di cui il settore del biodiesel comunitario avrà bisogno. Il fulcro di questa tesi è l’analisi della sostenibilità della produzione di biocarburanti e le sue conseguenze sulla produzione di materie prime agricole. La sostenibilità dei biocarburanti viene esaminata attraverso una revisione della letteratura esistente sull’argomento, con particolare enfasi sugli effetti della forte espansione del settore dei carburanti “verdi” sull’ambiente, sulle emissioni di gas serra, i cambiamenti d’uso del suolo, la disponibilità idrica e le implicazioni per i paesi in via di sviluppo. In termini di sostenibilità, uno degli aspetti più importanti riguarda gli effetti del forte aumento della produzione di biofuel sulla produzione e sui prezzi delle materie prime agricole. Questa tesi, nella sua parte empirica, utilizza tecniche econometriche per misurare il livello di integrazione tra i mercati energetici e quelli agricoli nei principali paesi produttori. Viene inoltre anche stimata l’elasticità di trasmissione dei prezzi tra il mercato mondiale e quello comunitario nel caso delle principali materie prime agricole, prima e dopo l’ultima riforma della Politica agricola comune (Riforma Fischler). Negli Stati Uniti e in Brasile i prezzi agricoli e quelli dell’energia (petrolio ed etanolo) condividono il medesimo trend di lungo periodo, con l’influenza del prezzo del petrolio che è andata crescendo negli ultimi anni. Ciò implica che i decisori politici dovranno, in futuro, prestare grande attenzione agli effetti che le politiche energetiche hanno sui mercati agricoli e viceversa. In Europa non è stato possibile dimostrare la presenza di una relazione diretta tra prezzi agricoli e prezzo del petrolio, tuttavia è possibile affermare che i mercati agricoli europei subiscano le conseguenze delle politiche a favore dei biocarburanti di altri paesi, in particolare degli Stati Uniti, in maniera indiretta, cioè tramite l’effetto di tali politiche sui prezzi internazionali. Ciò che merge da questo lavoro è che i biocarburanti, nella situazione economica, politica e demografica attuale, sono, per molti aspetti, non sostenibili. Gli effetti collaterali della produzione di biofuel sono numerosi e spesso difficili da quantificare. Le soluzioni proposte dalla letteratura sono spesso utopiche o, seppur corrette dal punto di vista teorico, molto difficili da applicare. L’espansione del settore dei biocarburanti sta avendo effetti negativi sulla produzione e sui prezzi delle materie prime agricole, sulla biodiversità e sul benessere sociale, sia all’interno dei principali paesi produttori che all’esterno di essi. Il “peccato originale” è stato la mancanza di coordinazione iniziale tra le varie politiche, progettate e messe in pratica in maniera unilaterale dai vari paesi; una cosa alla quale, oggi, è molto difficile porre rimedio. I governi dovrebbero, come è stato recentemente raccomandato dalle Nazioni Unite, considerare la possibilità di modificare in maniera sostanziale i propri programmi di sviluppo del settore dei biocarburanti a causa soprattutto delle pesanti conseguenze che hanno sulla sicurezza alimentare nei paesi a basso reddito. Per questa ragione l’utilizzo dei biocarburanti come misura volta a stimolare lo sviluppo nei paesi poveri dovrebbe essere evitata. È altamente improbabile che i poveri nelle zone rurali traggano alcun beneficio dallo sviluppo del settore dei biocarburanti nei loro paesi poiché gran parte della terra è posseduta da grandi compagnie multinazionali o, in alcuni casi, da paesi terzi (land grabbing). Lo sviluppo del settore dei biocarburanti nei paesi in via di sviluppo contribuirebbe, dall’interno, a mantenere elevati i prezzi dei generi alimentari anche dove finora tale effetto, a causa del basso livello di trasmissione dei prezzi agricoli mondiali, è stato marginale. L’aumento dell’inflazione alimentare causato dalla produzione di biocarburanti avrebbe effetti negativi sia sui poveri delle aree urbane che sue quelli delle aree rurali poiché in molti casi i piccoli coltivatori, nei paesi in via di sviluppo, sono compratori netti di generi alimentari. Molti studi, anche da parte di organizzazioni governative internazionali, mettono in risalto il fatto che la produzione di biocarburanti possa diventare sostenibile solo attraverso lo sviluppo delle cosiddette tecnologie di seconda o terza generazione (cioè quelle che permettono l’uso di materia prima non-food per la produzione di biocarburanti) e l’uso di terreni degradati e marginali per la coltivazione delle materie prime. Tuttavia, tutto ciò è di difficile realizzazione. Attualmente i biocarburanti di seconda o terza generazione sono ancora in fase di sviluppo e la loro produzione non crescerà in maniera sostanziale se non tramite forti investimenti da parte dei vari governi e, in determinate circostanze, di investitori privati. Va ricordato che non sono i governi quelli che decidono se la coltivazione di materia prima per la produzione di biocarburanti in aree degradate o marginali sia economicamente conveniente: sono infatti i coltivatori quelli che prendono le decisioni ed essi non lo faranno se non vi troveranno alcun beneficio economico. L’attuale livello, molto elevato, dei prezzi agricoli pone seri dubbi sul fatto che i coltivatori siano disposti a passare dalla produzione di materie prime food a quelle non-food in assenza di forti incentivi pubblici in tal senso. Tuttavia, un aumento del livello di supporto all’agricoltura, anche solo nel caso delle colture energetiche, difficilmente avverrà nel breve termine, a causa soprattutto della crisi economica, che ha ristretto i budget di spesa di molti paesi, e le pressioni, in sede WTO, per una riduzione del livello di protezione dei mercati. Nel caso in cui si decida di mantenere gli aiuti di stato al settore dei biocarburanti, sarà necessario progettare e sviluppare nuove politiche, questa volta a livello sovranazionale, cosa che implicherebbe un elevato livello di coordinazione e di flessibilità tra i vari paesi, oltre che difficile da raggiungere nel breve o medio termine. Un caso emblematico, in tal senso, è rappresentato dalle metodologie di conteggio delle emissioni di gas serra che sono attualmente basate sull’analisi del ciclo di vita e che sono molto spesso incomplete (limitate, ad esempio, a determinati paesi o regioni) o ancora non in grado di considerare il ruolo di tutti i fattori (es. cambiamenti indiretti d’uso del suolo). La ricerca, negli anni a venire, dovrà focalizzarsi su due argomenti principali. Da una parte, le tecniche di produzione dei biocarburanti di seconda e terza generazione dovranno essere raffinate, rese economicamente convenienti e sostenibili dal punto di vista sociale e ambientale. Possibilmente ciò dovrà avvenire di pari passo con la progressiva riduzione del livello di supporto ai biocarburanti di prima generazione. Dall’altra parte, sarà necessario definire meglio le metodologie di quantificazione dell’impatto dei biocarburanti in termini ambientali, economici e sociali, in modo da determinare con certezza la loro sostenibilità e da consentire lo sviluppo di politiche più appropriate. In particolare, la messa a punto di metodologie affidabili per la valutazione dell’impatto dei vari biocarburanti è molto importante poiché, in futuro, le sovvenzioni potrebbero essere calcolate in maniera tale da premiare la produzione di quei biocarburanti in grado di fornire esternalità positive per l’ambiente e il benessere sociale.
Pospíšil, Tomáš. « Vliv provedení zateplení panelového domu v Ostravě na výdaje spojené s jeho provozem ». Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402101.
Texte intégralRyba, Radim. « Posouzení návratnosti investice do nízkoenergetického nebo pasivního rodinného domu ». Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-232912.
Texte intégralPANTINI, SARA. « Analysis and modelling of leachate and gas generation at landfill sites focused on mechanically-biologically treated waste ». Doctoral thesis, Università degli Studi di Roma "Tor Vergata", 2013. http://hdl.handle.net/2108/203393.
Texte intégralNaicker, Previn. « Energetic, structural and dynamic evaluation of HIV-1 proteases ». Thesis, 2015. http://hdl.handle.net/10539/16922.
Texte intégralHuman immunodeficiency virus (HIV), the causative agent of the acquired immunodeficiency syndrome (AIDS), remains a topic of global concern even though great strides have been made to combat the virus. The high replicative rate of the virus and recombination of the variety of viral strains complicate the treatment of AIDS. There has been an increasing prevalence of African HIV strains in the Americas and Europe. The viral protease (PR) is vital for the propagation of the virus; and thus, is a major target in antiviral therapy. The HIV-1 PR enzyme from the subtype C strain; which predominates in sub- Saharan Africa, has been greatly under-investigated in comparison to the protease from the subtype B strain which predominates in North America and Europe. Enzyme activity data which were part of this work suggested that the South African HIV-1 subtype C protease (CSA PR) displays improved substrate turnover in comparison to the subtype B PR. Thermodynamics and inhibition kinetics of drug binding showed that the C-SA PR is less susceptible to certain clinically-used protease inhibitors when compared to the subtype B PR. A crystal structure of the C-SA PR was solved and showed no difference to the global structure of the subtype B PR. Molecular dynamics simulations showed that the C-SA PR exhibits a wider range of open conformations. Hydrogen/deuterium exchange-mass spectrometry (HDX-MS) was performed to elucidate the mechanism of reduced drug susceptibility displayed by the C-SA PR. HDX-MS data provided insights into the basis of the increased preference for open conformers displayed by the C-SA PR and the stability of the terminal dimer interface which is a target in protease inhibition.
Lin, Chun-Ping, et 林駿憑. « Thermokinetic Parameters Evaluation and Model Developments for Energetic Materials ». Thesis, 2010. http://ndltd.ncl.edu.tw/handle/35279508218236745089.
Texte intégral雲林科技大學
工程科技研究所博士班
98
This study was role of the green thermal analysis technology in promoting the use of resources, preventing pollution, reducing energy consumption and protecting the ecology and environment. A reaction kinetic model on thermal decomposition properties for energetic materials, such as 2,4,6,8,10,12-hexanitro- 2,4,6,8,10,12-hexaaza-isowurtzitane (HNIW), octahydro-1,3,5,7-tetranitro-1,3,5,7- tetrazocine (HMX), l,3,5-trinitro-l,3,5-triazmane (RDX), tert–butyl peroxybenzoate (TBPB), and multi-walled carbon nanotubes (MWCNTs) via differential scanning calorimetry (DSC) by well-known kinetic equations, curve-fitting approach, and kinetics evaluation simulations was created. Our objective was to analyze the thermokinetic parameters of various scanning rates for energetic materials by DSC, and then to compare thermal decomposition energy parameter simulations under various conditions by the kinetic model. Experimental results obtained strongly depended on the reliability of the kinetic model applied, which is essentially defined by the proper choice of a mathematical model of a reaction and the correctness of the methods used for kinetics evaluation. Moreover, this study established the models of thermal decomposition and thermal explosion hazard for energetic materials. Differential scanning calorimetry (DSC) data were used for parameters determination of the thermokinetic models, and then these models were employed for green simulation of thermal explosion. Experimental results indicating the best storage conditions to avoid any violent runaway reaction of energetic materials were also discovered. In addition, this study investigated the thermokinetic parameters of liquid of energetic materials by isothermal kinetic algorithm and non-isothermal kinetic equation by thermal activity monitor III (TAM III) and differential scanning calorimetry (DSC), respectively. Moreover, to simulate thermokinetic parameters, 5 gallon, 55 gallon, and 6 ton reactors of liquid thermal explosion models were created in this study. Our approach was to develop a precise and effective procedure on thermal decomposition, runaway and thermal hazard parameters, such as heat of decomposition (∆Hd), activation energy (Ea), isothermal time to maximum rate (TMRiso), time to conversion limit (TCL), self-accelerating decomposition temperature (SADT), control temperature (CT), emergency temperature (ET), and critical temperature (TCR), etc., for a reactor containing energetic materials. From experimental results, the best conditions for avoiding any violent runaway reaction of energetic materials were obtained by green analysis technology.
Wang, Qingsheng. « Theoretical and Experimental Evaluation of Chemical Reactivity ». Thesis, 2010. http://hdl.handle.net/1969.1/ETD-TAMU-2010-08-8296.
Texte intégralBASSI, NICCOLO'. « Energetic and economic assesment of a disposable panel reactor for Nannochloropsis sp. biomass production ». Doctoral thesis, 2010. http://hdl.handle.net/2158/578899.
Texte intégralTsai, Cheng-Che, et 蔡承哲. « A novel free energy evaluation scheme based on energetic decomposition of molecular dynamics simulations ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/46800758063593735821.
Texte intégral國立臺灣大學
藥學研究所
96
Accurate methods for predicting the affinity of a small molecule with a protein or other biomolecule play a crucial role in computational drug design because these predictions can speed the lead generation or lead optimization. Nowadays these methods can be categorized as docking and scoring and free energy method. Free energy method, in contrast with docking and scoring, which focus on a single bound conformation use conformation sampling to generate thermodynamic averages. Therefore, free energy methods are required more computer time than docking and scoring approaches. We consider that the dynamic effect of the protein-ligand complex should be still included in evaluating binding affinities because in the binding process, protein and ligand are flexible. Therefore, our study started from the linear interaction energy (LIE) method, which is one free energy method and only required two simulations, complex and ligad only. Besides that, it is also more economical than other free energy methods, such as the FEP and the MM-PBSA method. In our study, we used GROMACS to perform simulations with GROMACS force field parameters. For predicting the free energy of binding, we not only used the original LIE equation, but also we added ligand-ligand interaction into the evaluating scheme trying to obtain a better prediction model. In addition, we used several scoring functions, ChemScore, DrugScore, XScore, etc, to compare with our results.
Tsai, Cheng-Che. « A novel free energy evaluation scheme based on energetic decomposition of molecular dynamics simulations ». 2008. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2407200810271000.
Texte intégralMAZZA, GIUSEPPE. « Metabolic Power : a new energetic approach in soccer. Match analysis and training evaluation through the use of GPS devices ». Doctoral thesis, 2015. http://hdl.handle.net/2158/999806.
Texte intégral