Bibliographies thématiques / EMISSION ANALYSIS

Littérature scientifique sur le sujet « EMISSION ANALYSIS »

Auteur : Grafiati
Publié le 11 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « EMISSION ANALYSIS ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "EMISSION ANALYSIS"

1

Guven, Denizhan, M. Özgür Kayalica et Gülgün Kayakutlu. « CO2 emissions analysis for East European countries : the role of underlying emission trend ». Environmental Economics 11, no 1 (5 juin 2020) : 67–81. http://dx.doi.org/10.21511/ee.11(1).2020.07.

Texte intégral
Résumé :
This paper aims to analyze the impact of energy consumption, economic structure, and manufacturing output on the CO2 emissions of East European countries by applying the Structural Time Series Model (STSM). Several explanatory factors are used to construct the model using annual data of the 1990–2017 period. The factors are: total primary energy supply, GDP per capita and manufacturing value added, and, finally, a stochastic Underlying Emission Trend (UET). The significant effects of all variables on CO2 emissions are detected. Based on the estimated functions, CO2 emissions of Belarus, Ukraine, Romania, Russia, Serbia, and Hungary will decrease, by 2027, to 53.2 Mt, 103.2 Mt, 36.1 Mt, 1528.2 Mt, 36 Mt, and 36.1 Mt, respectively. Distinct from other countries, CO2 emissions of Poland will extend to 312.2 Mt in 2027 due to the very high share of fossil-based supply (i.e., coal and oil) in Poland. The results also indicate that the most forceful factor in CO2 emissions is the total primary energy supply. Furthermore, for Poland, Romania, Hungary, and Belarus, the long-term impact of economic growth on CO2 emissions is negative, while it is positive for Russia, Ukraine, and Serbia. The highest long-term manufacturing value-added elasticity of CO2 emissions is calculated for Serbia and Belarus.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Yuan, Yongke, Yixing Wang, Yuanying Chi et Feng Jin. « Identification of Key Carbon Emission Sectors and Analysis of Emission Effects in China ». Sustainability 12, no 20 (19 octobre 2020) : 8673. http://dx.doi.org/10.3390/su12208673.

Texte intégral
Résumé :
Analysis of sectors’ emission effects is crucial for identifying key emission sectors and reducing carbon. Current literature for calculating sectors’ emission effects in China ignore intermediate demand. This might introduce inaccuracy into the analyzed results. To solve this gap, this paper used an alternative input–output method to analyze sectors’ emission effects in China. Firstly, it identifies the key emission sectors and their emission effect characteristics from 2005 to 2017. Then, the reasons for the changes in these sectors’ emission effects are analyzed. Lastly, emission effects were further decomposed so that the driving relationships of emissions among these sectors can be sorted out. The results show that the overall key emission sectors were metal smelting and processing and nonmetal mineral products. The backward-emission-dominant sectors were construction, chemical products, other services (such as finance, health and education), metal products, and so on. The forward-emission-dominant sectors were production and supply of electricity and heat, transportation, storage, postal, and telecommunications services. In 2017, transportation, storage, postal, and telecommunications services’ own final demand emissions and forward emissions accounted for 41.7% and 58.3%, respectively, of this sector’s direct emissions. Moreover, from 2005 to 2017, the main sector emission paths affecting the growth of China’s emissions shifted from manufacturing and construction industries to service industries. Accordingly, strategies for emission reduction, such as substituting pollution inputs, were proposed and analyzed. The research provides an important reference for the Chinese government to adopt appropriate measures to reduce carbon.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Dragičević, Viktor, Marina Levak, Anton Turk et Ivan Lorencin. « Ship production processes air emissions analysis ». Pomorstvo 36, no 1 (30 juin 2022) : 164–71. http://dx.doi.org/10.31217/p.36.1.19.

Texte intégral
Résumé :
Compliance with modern environmental norms and regulations is an increasingly important requirement in the shipbuilding process of ship design and construction. Related to the ship production process, volatile organic compounds (VOCs), nitric oxides and particulate matter are the main emissions of harmful gases in the shipyard. This paper analyzes air emissions from the ship production process in a shipyard. Air emissions are quantified from either in-situ measurements from emission sources, or by materials that are used in the shipbuilding process, and the acquired data from those measurements is calculated as yearly emissions. Emission quantities of VOCs, nitric oxides, carbon dioxide, carbon monoxide and particulates are analyzed regarding possible reduction techniques considering efficiency and investment costs for using these methods. In conclusion, the best available and feasible emission reduction methods are suggested, and a suggestion for achieving the goal of a net zero emission shipyard.
Styles APA, Harvard, Vancouver, ISO, etc.
4

WANG, Xingmin, Jing WU, Zheng WANG, Xiaoting JIA et Bing BAI. « Accounting and Characteristics Analysis of CO2 Emissions in Chinese Cities ». Chinese Journal of Urban and Environmental Studies 08, no 01 (mars 2020) : 2050004. http://dx.doi.org/10.1142/s2345748120500049.

Texte intégral
Résumé :
Accurate estimation of CO2 emissions is a prerequisite for scientific low-carbon emission policymaking. Based on 20 types of energy consumption data at the prefecture level in China, this paper re-estimates the CO2 emissions of 198 prefecture-level cities in 2016 by using the method of carbon emission coefficient. The spatial pattern and scale characteristics are analyzed, and the conclusions are as follows: (1) Overall, China’s urban CO2 emissions show a certain degree of spatial separation in terms of the total amount, per capita emissions, and emission intensity. Cities with the highest CO2 emissions in China are mainly concentrated in North China, East China and Chongqing, while cities with the highest per capita CO2 emissions and emission intensity are mainly concentrated in Northwest and North China. (2) Different types of cities have different CO2 emission characteristics. Resource-based cities have a higher total amount and emission intensity; tourism and underdeveloped cities both have lower values; while super-large-sized cities and many very-large-sized cities have higher CO2 emissions, but their emission intensities are usually lower; and no obvious rules are found in other cities. (3) Spatial analysis shows that cities with higher CO2 emissions are clustered. The Beijing–Tianjin–Hebei region, the Yangtze River Delta region, Shandong Province, and Shanxi–Henan–Anhui resource-producing areas are the agglomeration areas of high-emission cities. (4) Scale analysis shows that the characteristics of CO2 emissions at different scales are different. Provincial-level research can help to identify the environmental impact and total effect of carbon emissions, while urban-scale research is helpful to explore the diversity and phases of cities. Finally, based on the main conclusions of this study, the corresponding urban low-carbon policy implications are drawn.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Chen, Zhen. « Analysis on Carbon Emission Right Theories ». Applied Mechanics and Materials 644-650 (septembre 2014) : 5235–38. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.5235.

Texte intégral
Résumé :
Since China’s National Development and Reform Commission approved the first seven pilot cities to carbon emission right trading, carbon emission trading is now flourishing in the country. However, in practice, the carbon emission trading emerges many problems and short in some basic theories to safeguard. In theory, the nature of carbon emission right still has no uniform academic definition. What is carbon emission right? There is an academic contend to illustrate it, such as usufruct right, property right, new property and other theories. What’s more, defining the nature of carbon emission right is the premise to ensure that carbon emissions trading system work smoothly.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Stepanović, Nemanja, et Vladan Tubić. « Analysis of ecological benefits of traffic flow electrification ». Put i saobraćaj 65, no 2 (9 juillet 2019) : 19–27. http://dx.doi.org/10.31075/pis.65.02.04.

Texte intégral
Résumé :
Road transport is responsible for 22% of the total CO2 emissions, 39% of NOx emission and 10% share of particulate matters (PM10, PM2.5) emission. The use of passenger cars, as an extremely dominant category of vehicles, is at constant growth, which causes an increase or insufficient reduction of Greenhouse Gas emission, despite the technological improvements of exaust emission devices. Due to the growing harmful effects on the environment and human health, as well as the recent scandals associated with internal combustion engine tehcnology („Dieselgate scandal”), development of new technology is fast forward toward electric vehicles.The biggest automotive corporations plans dominant fleet electrification in the next 10 years. However, sudden share increase of the electric vehicles in the traffic flow can lead to the capacity overcoming of the electricity grid network, or the issue of the "ecological footprint" of such a trend. In this paper, the overall environmental impact (so-called Well-to-Wheel analysis) of the increasing number of electric vehicles was analysed. Comparison analysis of vehicles equipped with internal combustion egines and electric vehicles showed the absence of Greenhouse Gass emisson reduction in countries with low percentage of electricity gained from renewable energy sources. Well-to-Wheel analysis was also conducted for several scenarios of electric vehicles participation in traffic flow in Republic of Serbia i.e their influence on electricity grid network and its emission.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Honghai, Yu, Wang Zhi, Chen Li et Wu Jianan. « CO2 Emission Calculation and Emission Characteristics Analysis of Typical 600MW Coal-fired Thermal Power Unit ». E3S Web of Conferences 165 (2020) : 01029. http://dx.doi.org/10.1051/e3sconf/202016501029.

Texte intégral
Résumé :
In order to effectively reduce the total CO2 emissions of coal-fired power plants and reduce greenhouse gas emissions, the relevant data of a typical 600MW coal-fired power plant in the past five years was collected and investigated, and CO2 emissions and emission intensity were calculated. And the results were used to measure the CO2 emission level of coal-fired power plants. By comparing and analyzing the CO2 emission intensity and emission trend of 600MW coal-fired units with different unit types and different fuel types, the CO2 emission characteristics of typical 600MW coal-fired power plants are obtained.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Jang, Sunhee, Ki-Han Song, Daejin Kim, Joonho Ko, Seongkwan Mark Lee, Sabeur Elkosantini et Wonho Suh. « Road-Section-Based Analysis of Vehicle Emissions and Energy Consumption ». Sustainability 15, no 5 (1 mars 2023) : 4421. http://dx.doi.org/10.3390/su15054421.

Texte intégral
Résumé :
To monitor air pollution on roads in urban areas, it is necessary to accurately estimate emissions from vehicles. For this purpose, vehicle emission estimation models have been developed. Vehicle emission estimation models are categorized into macroscopic models and microscopic models. While the calculation is simple, macroscopic models utilize the average speed of vehicles without accounting for the acceleration and deceleration of individual vehicles. Therefore, limitations exist in estimating accurate emissions when there are frequent changes in driving behavior. Microscopic emission estimation models overcome these limitations by utilizing the trajectory data of each vehicle. In this method, the total emissions in a road segment are calculated by adding together the emissions from individual vehicles. However, most research studies consider the total vehicle emissions in a road section without considering the difference in vehicle emissions at different locations of a selected road section. In this study, a road segment between two intersections was divided into sub-sections, and energy consumption and emission generation were analyzed. Since there are unique driving behaviors depending on the section of the road segment, energy consumption and emission generation patterns were identified. The findings of this study are expected to provide more detailed and quantitative data for better modeling of energy consumption and emissions in urban areas.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Xu, Aixia, et Xiaoyong Yang. « Analysis of total carbon emission of the logistics industry in Guangdong and solutions to emission reduction ». E3S Web of Conferences 245 (2021) : 01020. http://dx.doi.org/10.1051/e3sconf/202124501020.

Texte intégral
Résumé :
The input-output method is employed in this study to measure the total carbon emission of the logistics industry in Guangdong. The findings revealed that the carbon emission of direct energy consumption of the logistics industry in Guangdong is far above the actual carbon emissions, the second and third industries play a significant role in carbon emission of indirect energy consumption in the logistics industry in Guangdong. To reduce energy consumption and carbon emissions in Guangdong, it is not only important to control the carbon emissions in the logistics industry, but strengthen carbon emission detection in relevant industries, improve the energy utilization rate and reduce emissions in other industries, and move towards low-carbon sustainable development.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Zhang, Ye, Yating Song, Tianshi Feng et Yanyan Chen. « Comparative Analysis of Emission Characteristics of In-Use China II–V Gasoline, Hybrid, Diesel-Fueled Vehicles ». Atmosphere 14, no 2 (29 janvier 2023) : 272. http://dx.doi.org/10.3390/atmos14020272.

Texte intégral
Résumé :
Increasingly stringent regulations regarding vehicle emissions have contributed to the diversification of vehicle technologies, resulting in the increasing complexity of typical vehicles that make up a fleet. In order to investigate the real gas emissions of different typical vehicles, tests were conducted using a portable emission measurement system (PEMS) in Beijing and emission studies were conducted on eight light-duty passenger vehicles (LDPVs, including light-duty gasoline passenger vehicles and hybrid electric vehicles), eight heavy-duty passenger vehicles (HDPVs), and four light-duty trucks (LDTs). The results show that the emissions of relevant pollutants from LDPV meet the emission standard limits. The emission factors of CO2, CO, NOX, and HC of China IV and China V hybrid electric vehicles (HEVs) are much smaller than the emission standard limits and the emission factors of other vehicles, which have better emission reduction effects. Among LDPV, heavy-duty passenger vehicles (HDPVs), and LDT, the emissions of HDPV and LDT are extremely high. Emission characteristics vary on different types of roads, with the highest emission factors generally occurring on secondary roads. The micro-trip method was used to explore the influence of speed on emission factors. HEV are less sensitive to speed changes and can still maintain a low emission level at low speeds. The average speed and emission factors of HDPV in micro-trip has a strong correlation.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "EMISSION ANALYSIS"

1

Kim, Tae-Kyung. « Dynamic analysis of sulfur dioxide monthly emissions in U.S. power plants ». Columbus, Ohio : Ohio State University, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1086195964.

Texte intégral
Résumé :
Thesis (Ph. D.)--Ohio State University, 2004.
Title from first page of PDF file. Document formatted into pages; contains xviii, 218 p.; also includes graphics. Includes abstract and vita. Advisor: Jean Michael Guldmann, City and Regional Planning Graduate Program. Includes bibliographical references (p. 130-133).
Styles APA, Harvard, Vancouver, ISO, etc.
2

Reniers, Jorn. « Analysis of a real-time signal for greenhouse gas emissions of district heating consumption ». Thesis, KTH, Industriell ekologi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-169508.

Texte intégral
Résumé :
The district heating system (DHS) of Stockholm is one of the largest systems in the world with a total yearly production of 10TWh of heat and 2TWh of electricity (through combined heat and power plants). Large amounts of greenhouse gasses (GHG) are emitted to produce this heat and electricity. Given the goal of the City of Stockholm to reduce the amount of GHG emissions to 3 ton per capita in 2015 and to keep reducing emissions at a similar rate after 2015, it is important to identify the potentials for further reductions. Numerous studies have been done on how the DHS can become more sustainable by installing new generation units. However, also the consumers have an influence on the DHS. After all, it are the consumers who decide when and how much heat or electricity they use. Most former studies and environmental guidelines for the DHS in Stockholm focussed on the producer side. This thesis looks at the consumer perspective of the (heat of the) district heating system. A real-time signal giving the greenhouse gas emissions of individual households is developed and its potential and challenges are discussed. With this signal, households that want to minimise their environmental impact have a tool to decrease their environmental impact by changing their consumption. This can be a first step to transform the DHS to a smart district heating system. First, generic models to calculate the dynamic greenhouse gas intensity of the heat production of district heating and to calculate the greenhouse gas emissions related to the heat consumption of households are suggested. Then the feedback signal with those real-time household emissions is calculated for representative households in Stockholm based on data of Stockholm’s DHS and data about hot tap water consumption in Sweden. Results indicate that variations in household level greenhouse gas emissions mostly reflect changes in consumption but can also result from changes by the producer. Intraday variations are mostly caused by changes in hot tap water consumption, while variations on a timescale of a few days are caused by changes in heating consumption (changing weather) and changes made by the producer (to use different fuels). Then several scenarios are calculated, each scenario looking at the actions a consumer can take to shift or reduce his/her consumption (decrease hot tap water usage, lower indoor temperature etc.). The real-time household emissions are calculated again to see if the signal gives the needed incentives (is the household rewarded for its effort? Does it get further incentives?). It was found that a strong time-incentive (to decrease consumption when it saves most emissions) is missing if the average perspective is used to calculate the emission intensity of the heat production. Also, the results confirmed the finding that the feedback signal might not reflect changes in consumption. Finally, challenges for the signal are discussed. One of the major hurdles is the fact that household consumption of heat (heating and hot tap water) can often not be measured on a household level. Thus, it has to be estimated but it seems very difficult to get this estimation accurate enough to give correct feedback to households, especially about the emissions saved by their efforts to reduce/shift their consumption. Secondly, the time resolution should be chosen well to still get accurate results but not make the signal to data-intensive. Finally, the result is heavily dependent on the chosen methodology (average or marginal perspective? Do you account for the electrical side of the DHS? How about the distribution losses? Etc.).
Styles APA, Harvard, Vancouver, ISO, etc.
3

Sayeed, Abdul. « Positron emission tomography analysis of Alzheimer's disease ». Thesis, University of Surrey, 2001. http://epubs.surrey.ac.uk/842834/.

Texte intégral
Résumé :
Alzheimer's Disease (AD) is a major concern for the elderly population, currently affecting over 670,000 people in the UK. With the continual increase in the age of the population the problem is expected to rise. There is no known cure to the condition and a definite diagnosis cannot be made in life. Clinical diagnosis is considered to be approximately 80% - 90% accurate, sometimes taking up to a year to assess. Early detection could aid in the care and possible development of better treatments or even a cure. AD has been shown to alter the structure and global texture of the brain. Studies using Magnetic Resonance imaging (MRI) and Computerised Tomography (CT) have been used to detect these changes with some success by some researchers. Positron Emission Tomography (PET) imaging is a functional imaging modality and in theory before structural changes are evident functional changes should be apparent. Therefore we utilise PET images for this study. This thesis will exploit the fact that AD alters the global texture of the brain. Texture features extracted from fluoro-deoxy-glucose (FDG) PET images and sinograms of the brain will be used. Most texture feature extraction methods fail, due to poor signal to noise ratio so we will use a novel texture feature extraction method known as the Trace transform - triple features, which can extract features directly from raw data acquired by PET scanners. Classifiers will be used to aid in the separation of the two groups, namely AD patients and normal controls. The Trace transform - triple feature method has proven its potential as a good feature extraction technique. It enabled us to achieve classification accuracy of up to 93% on raw sinogram data using a combination of five features. This result is very good compared with the clinical accuracy of 80% reported by most researcher. It is comparable to results obtained by Kippenhan et al [52, 53, 51, 50], who used regional metabolic activity using PET and a neural network classifier. Monomial features extracted from images achieved accuracies as high as 87%. These features are good discriminators, however, they suffer from lack of scaling invariance. This is problematic as brain sizes do vary considerably. The use of registration and extraction of regional information failed to produce fruitful results. This is principally due to poor registration. The registration failed primarily because a very small cross section of the brain was available. Also the effect of AD alters the structure of the brain. Since the registration relies on matching structure, it becomes questionable whether one can actually register automatically a very degraded AD brain. Gender and age are crucial to the progress of Alzheimer's disease. Age and gender matching is not sufficient to get the best results. This thesis has shown that performance gains of up to 11% can be attained by simply incorporating age and/or gender into the classification model. However, the maximum classification accuracy was not improved any further.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mathiyaparanam, Jeyisanker. « Analysis of acoustic emission in cohesionless soil ». [Tampa, Fla] : University of South Florida, 2006. http://purl.fcla.edu/usf/dc/et/SFE0001715.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Elfergani, Hisham. « Acoustic emission analysis of prestressed concrete structures ». Thesis, Cardiff University, 2013. http://orca.cf.ac.uk/49383/.

Texte intégral
Résumé :
This thesis examines the role of Acoustic Emission (AE) as a non-destructive testing (NDT) technique for prestressed and reinforced concrete structures. The work focuses on the development of experimental techniques and data analysis methods for the detection, location and assessment of AE from prestressed and reinforced concrete specimens. This thesis reveals that AE can be used to detect the onset of corrosion activity in wire in the interface between prestressed concrete and mortar as found in prestressed concrete pipes. Furthermore, this technique can be used to locate the corrosion activity on different size prestressed concrete samples. By correlation between three parameters of classical AE analysis techniques (traditional parameters), damage can be detected and located whilst the corrosion area, macro crack and crack propagation can be identified. However, it cannot classify the crack type. Different damage modes, including corrosion activity, micro/macro cracking formation, crack propagation and wire failure generate different types of AE signals with varying amplitudes and absolute energy emitted. A novel analysis approach has been used on composite materials (concrete, mortar and steel) to evaluate differing crack types by a combination of the classical acoustic emission analysis technique and advanced analysis Rise time / Amplitude (RA) and Average Frequency (AF), results proved the effectiveness of the developed techniques for damage detection and classification crack types. The relationship between RA value and AF value can be used to determine the crack area and classify it as either tensile crack type, other type (shear movement) or no crack. The results of the research have demonstrated that the AE technique is valid in larger scale monitoring and hence the potential for monitoring real structures such as prestressed concrete pipes. Use of Kernel Density Estimation Function (KDEF) provides improved visualisation of the data to represent clearly the RA/AF values. Key Words: Acoustic Emission, Corrosion, Reinforced Concrete, Prestressed Concrete, Micro and Macro Concrete Cracks, Crack classification, Source Location, Damage Assessment, Monitoring.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Erickson, Brice Carl. « Multicomponent flow injection analysis and quantitative infrared emission spectroscopy : chemometric applications / ». Thesis, Connect to this title online ; UW restricted, 1988. http://hdl.handle.net/1773/8633.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Nemalapuri, Vijay Krishna. « Impact of Traffic Operations on Carbon Monoxide Emissions Analysis ». University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1282322424.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Pell, Randall James. « Chemometrics and infrared emission spectroscopy for remote analysis / ». Thesis, Connect to this title online ; UW restricted, 1990. http://hdl.handle.net/1773/11545.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Link, Christoph, Juliane Stark, Axel Sonntag et Reinhard Hössinger. « Contribution of an emission trading scheme to reduce road traffic induced CO2 emissions in Austria ». Elsevier, 2012. http://dx.doi.org/10.1016/j.sbspro.2012.06.1170.

Texte intégral
Résumé :
The Emission Trading Scheme for green house gases is a key tool of European climate protection. Including the road transport sector might be a promising strategy to limit its CO2 emissions. This could be realized within a common market (trans-sectoral trading permitted) or separated markets (trans-sectoral trading not permitted). Starting from different assumptions on emission reduction objectives, the impact of both options is analyzed using a quantitative model. Although an emission trading scheme is ecologically effective regardless of the trading model, it turns out that CO2 emissions and emission allowance prices differ strongly between both design options due to sector specific price elasticities of allowance demand. (authors' abstract)
Styles APA, Harvard, Vancouver, ISO, etc.
10

Vidal, Meliá Lidia. « Analysis of environmental policy and emission control instruments ». Doctoral thesis, Universitat Jaume I, 2020. http://hdl.handle.net/10803/668542.

Texte intégral
Résumé :
The debate on the emissions control instruments for improving environmental policy is the inspiration of the present thesis. In a first attempt, we use a theoretical model to study how international trade affects the governments' decision on their industrial policy. We show that the countries' market size might drive the regulator's decision on the optimal industry policy. We also use laboratory methods to evaluate the impact of different combinations of instruments, compliances, and timings on firms' investment incentives. The asymmetric model of Requate and Unold, 2001 is the base of our experimental design by allocating different initial technologies to the firms, where firms can adopt an advanced abatement technology, which is the same for all firms. In particular, this thesis attempts to demonstrate whether this procedure induces an optimal allocation of investment decisions.
La inspiración de la presente tesis gira entorno al debate sobre los instrumentos de control de emisiones para mejorar la política ambiental. En un primer intento, utilizamos un modelo teórico para estudiar cómo el comercio internacional afecta la decisión de los gobiernos sobre su política industrial. Mostramos que el tamaño del mercado de los países podría impulsar la decisión del regulador sobre la política óptima de la industria. También empleamos métodos de laboratorio para evaluar el impacto de diferentes combinaciones de instrumentos, cumplimientos y tiempos en los incentivos de inversión de las empresas. El diseño experimental se basa en el modelo asimétrico de Requate and Unold, 2001 al asignar diferentes tecnologías iniciales a las empresas, donde las empresas pueden adoptar una tecnología de reducción avanzada, que es la misma para todas las empresas. En particular, esta tesis intenta demostrar si este procedimiento induce una asignación óptima de las decisiones de inversión.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "EMISSION ANALYSIS"

1

Engineers, Society of Automotive, et SAE International Congress & Exposition (1994 : Detroit, Mich.), dir. Global emission technology and analysis. Warrendale, Pa : Society of Automotive Engineers, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

P, Peèraèmaki, et Royal Society of Chemistry (Great Britain), dir. Spectrochemical analysis by atomic absorption and emission. 2e éd. Cambridge : Royal Society of Chemistry, 2004.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Nilsen, Heidi. Imaging photon emission spectroscopy of food material. Aachen : Shaker, 1996.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Jayachandran, Toke. Studies and analyses in support of the oil analysis program. Monterey, California : Naval Postgraduate School, 1986.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

United States. Environmental Protection Agency. Emission Standards Division., dir. Flexible polyurethane foam, emission reduction technologies, cost analysis. Research Triangle Park, N.C : U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 1996.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

1938-, Stiles David A., Calokerinos A. C et Townshend A. 1939-, dir. Flame chemiluminescence analysis by molecular emission cavity detection. Chichester : Wiley, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

United States. Environmental Protection Agency. Emission Standards Division, dir. Flexible polyurethane foam, emission reduction technologies, cost analysis. Research Triangle Park, N.C : U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 1996.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Kline, Jeffrey J. A simple analysis of the U.S. emission permits auctions. [Rio de Janeiro?] : CERES, 1999.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Johansson, Sven A. E. PIXE : A novel technique for elemental analysis. Chichester : Wiley, 1988.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Semiconductor device and failue analysis : Using photon emission microscopy. Chichester, [England] : Wiley, 2000.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "EMISSION ANALYSIS"

1

Krämer, Juliane. « Photonic Emission Analysis ». Dans Why Cryptography Should Not Rely on Physical Attack Complexity, 27–39. Singapore : Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-287-787-1_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Bruno, Thomas J., James W. Robinson, Eileen M. Skelly Frame et George M. Frame. « Atomic Emission Spectroscopy ». Dans Undergraduate Instrumental Analysis, 421–88. 8e éd. New York : CRC Press, 2023. http://dx.doi.org/10.1201/9781003188544-8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ahluwalia, V. K. « Emission Spectroscopy ». Dans Instrumental Methods of Chemical Analysis, 481–90. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-38355-7_33.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Akash, Muhammad Sajid Hamid, et Kanwal Rehman. « Atomic Emission Spectroscopy ». Dans Essentials of Pharmaceutical Analysis, 103–9. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-1547-7_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Akash, Muhammad Sajid Hamid, et Kanwal Rehman. « Molecular Emission Spectroscopy ». Dans Essentials of Pharmaceutical Analysis, 111–19. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-1547-7_8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Krämer, Juliane, Dmitry Nedospasov, Alexander Schlösser et Jean-Pierre Seifert. « Differential Photonic Emission Analysis ». Dans Constructive Side-Channel Analysis and Secure Design, 1–16. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-40026-1_1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Krautkrämer, Josef, et Herbert Krautkrämer. « Sound Emission Analysis (SEA) ». Dans Ultrasonic Testing of Materials, 264–65. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-662-10680-8_15.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Wang, Wenju. « Carbon emission rights and carbon emission reduction target ». Dans Price Analysis of China's Carbon Emissions, 2–17. London : Routledge, 2023. http://dx.doi.org/10.4324/9781003388500-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Wang, Wenju. « Regional classification of carbon emissions and carbon emission indices ». Dans Price Analysis of China's Carbon Emissions, 184–213. London : Routledge, 2023. http://dx.doi.org/10.4324/9781003388500-12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Shiotani, Tomoki, Yoshihiro Mizutani, Hideyuki Nakamura et Shigenori Yuyama. « Practical AE Testing, Data Recording and Analysis ». Dans Practical Acoustic Emission Testing, 61–99. Tokyo : Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55072-3_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "EMISSION ANALYSIS"

1

Bugaev, A. S., A. V. Vizir, V. I. Gushenets, A. G. Nikolaev, E. M. Oks, V. P. Frolova et G. Yu Yushkov. « COMPARATIVE ANALYSIS OF COATING PROCESSES USING VACUUM AND GAS MAGNETRON ». Dans Plasma emission electronics. Buryat Scientific Center of SB RAS Press, 2023. http://dx.doi.org/10.31554/978-5-7925-0655-8-2023-157-165.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Zavyalov, M. A., T. M. Sapronova et V. A. Syrovoy. « COMPARATIVE ANALYSIS OF THE CHARACTERISTICS OF THE DIODES WITH ELECTRON-ION FLOWS ». Dans Plasma emission electronics. Buryat Scientific Center of SB RAS Press, 2018. http://dx.doi.org/10.31554/978-5-7925-0524-7-2018-86-91.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Dogariu, Arthur, James Michael et Richard Miles. « Remote backwards emission in air via stimulated emission in atomic oxygen ». Dans Laser Applications to Chemical, Security and Environmental Analysis. Washington, D.C. : OSA, 2012. http://dx.doi.org/10.1364/lacsea.2012.lt2b.2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Melnik, Vladimir I., Alexander N. Mikhailov, Valery M. Grishkin, Dmitri A. Ovsyannikov et Yevgeny V. Yelaev. « Modeling methods of the test inputs for analysis the digital devices ». Dans 2014 2nd International Conference on Emission Electronics (ICEE). IEEE, 2014. http://dx.doi.org/10.1109/emission.2014.6893969.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Deslandes, Herve, Daisy Lu et Jenny Fan. « Extended photon emission camera for thermal emission detection ». Dans 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA). IEEE, 2017. http://dx.doi.org/10.1109/ipfa.2017.8060211.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Vader, Nathan. « Operational Carbon Emission Factor Literature Review ». Dans 2022 Building Performance Analysis Conference and SimBuild. ASHRAE and IBPSA-USA, 2022. http://dx.doi.org/10.26868/25746308.2022.simbuild2022_c034.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Vader, Nathan. « Operational Carbon Emission Factor Literature Review ». Dans 2022 Building Performance Analysis Conference and SimBuild. ASHRAE and IBPSA-USA, 2022. http://dx.doi.org/10.26868/25746308.2022.c034.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Cool, Terrill A. « Diagnostics for Emission Monitoring for Hazardous Waste Incineration ». Dans Laser Applications to Chemical Analysis. Washington, D.C. : Optica Publishing Group, 1994. http://dx.doi.org/10.1364/laca.1994.fa.1.

Texte intégral
Résumé :
The unique attributes of resonance-enhanced multiphoton ionization/time-of-flight mass spectrometry (REMPI/TOFMS) for rapid, ultrasensitive, and selective detection of toxic organics make it a promising new tool for quantitative evaluation of incinerator performance. The spectral selectivity of resonance ionization mass spectrometry, realizable with jet-cooling, eliminates the need for the time-consuming capillary column sample separation of conventional GC/MS analysis. Recent research indicates that real-time repetitive monitoring of a wide class of trace emissions at the part-per-billion level (ppb) is possible with the REMPI/TOFMS method.[1,2] Indeed, REMPI detection capabilities for specific compounds are expected to significantly influence stategies for the use of surrogates for stack gas monitoring.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Longgang Wu, Donglin Su, Jiajia Chen et Nankai Wu. « Radiated emission analysis of wires ». Dans EM Theory (ISAPE - 2010). IEEE, 2010. http://dx.doi.org/10.1109/isape.2010.5696642.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Tajik, Shahin, Dmitry Nedospasov, Clemens Helfmeier, Jean-Pierre Seifert et Christian Boit. « Emission Analysis of Hardware Implementations ». Dans 2014 17th Euromicro Conference on Digital System Design (DSD). IEEE, 2014. http://dx.doi.org/10.1109/dsd.2014.64.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "EMISSION ANALYSIS"

1

Suzuki, Tsuyoshi, Takaki Itaya, Daisuke Kadowaki, Koji Yoshida et Hideo Shoji. Combustion Analysis of Preflame Reaction Light Emission Behavior by Using Light Emission Measurement. Warrendale, PA : SAE International, septembre 2005. http://dx.doi.org/10.4271/2005-08-0514.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Hester, M. Gas plasma analysis using an emission spectrometer. Office of Scientific and Technical Information (OSTI), janvier 1990. http://dx.doi.org/10.2172/5137451.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Chen, Chao-Lung, et Zong-Da Lin. Feasibility Study of Emission Improvement through Transient Emission Characteristics Analysis for Idle-Stop Motorcycles. Warrendale, PA : SAE International, octobre 2013. http://dx.doi.org/10.4271/2013-32-9052.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Peterson, Warren. PR-663-20208-Z01 CO2e Economic Analysis Tool. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), mars 2021. http://dx.doi.org/10.55274/r0012079.

Texte intégral
Résumé :
The CO2e Economic Analysis Tool (CEAT) is a spreadsheet-based application for comparing project alternatives that are sensitive to GHG emission rates, emission levies or other financial parameters. The tool is applicable to hydrocarbon transportation systems, with an emphasis on natural gas transmission. CEAT provides a comparative forecast of benefits and expenses (including levies) from initial cash flow to arrival at the forecast horizon. Along with financial forecasting functions, the tool estimates the emissions associated with a wide range of hydrocarbon fluids (gas and liquid), electricity, thermal energy, and upstream transportation. The forecast model provides flexible configuration of CAPEX and O and M expenses and a customizable levy structure. The tool is Excel-based and requires version 16 or newer.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Coulson, Wendy, et James McCarthy. PR-312-16202-R02 GHG Emission Factor Development for Natural Gas Compressors. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), mai 2018. http://dx.doi.org/10.55274/r0011488.

Texte intégral
Résumé :
The U.S. EPA Greenhouse Gas (GHG) Reporting Program (GHGRP) requires compressor stations and underground storage facilities to measure compressor vent, rod packing, and seal emissions for facilities subject to 40 CFR, Part 98, Subpart W. The objective of the project is to gather and evaluate 2011 - 2016 Subpart W compressor vent and seal methane emissions data from site measurements, and present final results of an analysis to develop methane Emission Factors (EFs) based on these data. The EFs and analysis of relative contribution from different sources can be used: (1) as alternatives to current emission factors for compressor methane emissions used for Transmission and Storage (T and S) operations in EPA's annual GHG inventory; (2) to provide an EF based emission estimate for Subpart W that replaces ongoing annual GHGRP vent measurements; and (3) to document the relative contribution of different compressor leak/seal sources and support alternative leak mitigation strategies. Comparisons of the EPA Annual GHG Inventory EFs to Subpart W based EFs in this report show consistently lower compressor emissions than estimates based on historical data or reports. Large leaks, which stem from less than 3% of the compressor measurements, increase the EFs by 26% to 194%, thus greatly impacting the EF results. Alternative EFs are provided for transmission and storage compressor methane emissions.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Trowbridge, L. D. Sensitivity analysis of the emission module of the ''Commercial and Residential Energy Use and Emissions Simulation System'' (CRESS). Office of Scientific and Technical Information (OSTI), mai 1987. http://dx.doi.org/10.2172/6532833.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Peterson, Warren. PR-663-20208-Z03 CO2e Economic Analysis Tool. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), avril 2023. http://dx.doi.org/10.55274/r0012255.

Texte intégral
Résumé :
The CO2e Economic Analysis Tool (CEAT) is a spreadsheet-based application for comparing project alternatives that are sensitive to GHG emission rates, emission levies, or other financial parameters. The tool is applicable to hydrocarbon transportation systems, with an emphasis on natural gas transmission. CEAT provides a comparative forecast of benefits and expenses (including levies) from initial cash flow to arrival at the forecast horizon. Along with financial forecasting functions, the tool estimates the emissions associated with a wide range of hydrocarbon fluids (gas and liquid), electricity, thermal energy, and upstream transportation. The forecast model provides flexible configuration of CAPEX and O and M expenses and a customizable levy structure. This download includes a copy of the report and a copy of the Excel-based CO2e Economic Analysis Tool software (aka CEAT). The spreadsheet and the associated report are licensed to single users as noted in the end-user license agreement that is contained in the zip file.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Plevin, Richard, Holly Gibbs, James Duffy, Sahoko Yui et Sonia Yeh. Agro-ecological Zone Emission Factor (AEZ-EF) Model (v47). GTAP Technical Paper, mars 2014. http://dx.doi.org/10.21642/gtap.tp34.

Texte intégral
Résumé :
The purpose of the agro-ecological zone emission factor model (AEZ-EF) is to estimate the total CO2-equivalent emissions from land use changes, e.g., from an analysis of biofuels impacts or policy analyses such as estimating the effect of changes in agricultural productivity on emissions from land use. The model combines matrices of carbon fluxes (Mg CO2/ha/y) with matrices of changes in land use (ha) according to land-use category as projected by GTAP or similar AEZ-oriented models. As published, AEZ-EF aggregates the carbon flows to the same 19 regions and 18 AEZs used by GTAP-BIO, the version of GTAP currently used by Purdue University researchers for modeling biofuel-induced ("indirect") land-use change (ILUC) (e.g., Tyner, Taheripour et al. 2010). The AEZ-EF model, however, is designed to work with an arbitrary number of regions, as described in the accompanying report.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Sullivan, J. L., A. Burnham et M. Wang. Energy-consumption and carbon-emission analysis of vehicle and component manufacturing. Office of Scientific and Technical Information (OSTI), octobre 2010. http://dx.doi.org/10.2172/993394.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Lipeles, Russell A. Quantitative Analysis of the TWT Cathode Impregnants Using Flame Emission Spectroscopy. Fort Belvoir, VA : Defense Technical Information Center, janvier 1987. http://dx.doi.org/10.21236/ada176293.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « EMISSION ANALYSIS » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie