Littérature scientifique sur le sujet « Elastomeric thermoplastic »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Elastomeric thermoplastic ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Elastomeric thermoplastic"
Matsuda, Akihiro, et Shigeru Kawahara. « Applicability of Thermoplastic Elastomers to Impact Load Reduction in Sports Equipment ». Proceedings 49, no 1 (15 juin 2020) : 163. http://dx.doi.org/10.3390/proceedings2020049163.
Texte intégralKresge, E. N. « Polyolefin Thermoplastic Elastomer Blends ». Rubber Chemistry and Technology 64, no 3 (1 juillet 1991) : 469–80. http://dx.doi.org/10.5254/1.3538564.
Texte intégralSchönherr, Holger, Willy Wiyatno, John Pople, Curtis W. Frank, Gerald G. Fuller, Alice P. Gast et Robert M. Waymouth. « Morphology of Thermoplastic Elastomers : Elastomeric Polypropylene ». Macromolecules 35, no 7 (mars 2002) : 2654–66. http://dx.doi.org/10.1021/ma010959m.
Texte intégralAbdou-Sabet, Sabet, et Raman P. Patel. « Morphology of Elastomeric Alloys ». Rubber Chemistry and Technology 64, no 5 (1 novembre 1991) : 769–79. http://dx.doi.org/10.5254/1.3538589.
Texte intégralEllul, Maria D., et Yuichi Hara. « SPECIALTY POLYMERS AND DYNAMICALLY VULCANIZED ALLOYS FOR ULTRA LOW AIR PERMEABILITY TIRE INNER LINERS ». Rubber Chemistry and Technology 91, no 4 (1 octobre 2018) : 751–56. http://dx.doi.org/10.5254/rct.18.81542.
Texte intégralAbdou-Sabet, S., R. C. Puydak et C. P. Rader. « Dynamically Vulcanized Thermoplastic Elastomers ». Rubber Chemistry and Technology 69, no 3 (1 juillet 1996) : 476–94. http://dx.doi.org/10.5254/1.3538382.
Texte intégralKozłowska, A., et M. Piatek-Hnat. « Evaluation of Influence of the Addition Nanofillers on the Mechanical and Thermal Properties Terpolymers Ester-Ether-Amide ». Archives of Metallurgy and Materials 59, no 1 (1 mars 2014) : 237–39. http://dx.doi.org/10.2478/amm-2014-0038.
Texte intégralRahmatabadi, Davood, Mohammad Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi et Mostafa Baghani. « A New Strategy for Achieving Shape Memory Effects in 4D Printed Two-Layer Composite Structures ». Polymers 14, no 24 (13 décembre 2022) : 5446. http://dx.doi.org/10.3390/polym14245446.
Texte intégralMadkour, Tarek M., et James E. Mark. « Properties of thermoplastic elastomeric polypropylene ». Polymer Bulletin 39, no 3 (septembre 1997) : 385–91. http://dx.doi.org/10.1007/s002890050163.
Texte intégralLegge, N. R. « Thermoplastic Elastomers—Three Decades of Progress ». Rubber Chemistry and Technology 62, no 3 (1 juillet 1989) : 529–47. http://dx.doi.org/10.5254/1.3536257.
Texte intégralThèses sur le sujet "Elastomeric thermoplastic"
Jindal, Aditya Jindal. « Electrospinning and Characterization of Polyisobutylene-based Thermoplastic Elastomeric Fiber Mats For Drug Release Application ». University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1512483246405986.
Texte intégralRAJAN, GURU SANKAR. « PREPARATION AND CHARACTERIZATION OF SOME UNUSUAL ELASTOMERIC AND PLASTIC COMPOSITES ». University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1022871144.
Texte intégralAsplund, Basse. « Biodegradable Thermoplastic Elastomers ». Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis Acta Universitatis Upsaliensis, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-7434.
Texte intégralZhou, Ruijuan [Verfasser], et Martin [Akademischer Betreuer] Maier. « Nanoparticle-Filled Thermoplastics and Thermoplastic Elastomer : Structure-Property Relationships / Ruijuan Zhou ; Betreuer : Martin Maier ». Kaiserslautern : Technische Universität Kaiserslautern, 2017. http://d-nb.info/1138630527/34.
Texte intégralKumar, Nishant C. « Anionically Polymerized Supramolecular Thermoplastic Elastomers ». University of Akron / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=akron1427128414.
Texte intégralScetta, Giorgia. « Fatigue cracking of thermoplastic elastomers ». Electronic Thesis or Diss., Université Paris sciences et lettres, 2020. http://www.theses.fr/2020UPSLS022.
Texte intégralSoft thermoplastic polyurethane elastomers (TPU) are a class of block copolymers characterised by a low linear modulus (<10MPa), reversible elasticity and excellent abrasion resistance already used in several rubber‐like applications such as soles, wheels, flexible cables, etc. Yet, their fatigue behaviour under cyclic loading has not been fully investigated so far, leaving several open questions about how predicting long‐term durability of TPUs for a safe design. In this work we proposed a reproducible experimental protocol to assess and compare the resistance to crack propagation in cyclic conditions of TPU, with that of classical filled rubbers by using a fracture mechanics approach. Furthermore, we characterized the mechanical response under cyclic loading at large and small strain of three commercial TPUs with similar linear moduli and rheology but different large strain behaviours: extended softening, strain hardening and strain hardening enhanced by SIC. Irrespectively of their composition, all TPUs presented an unconventional strain induced stiffening in step‐cyclic experiment. Using DIC and X‐Ray in situ experiments we showed that, the strain gradient at the crack tip generates a spatial re‐organization of the TPU microstructure consistent with a volume locally stiffer than the bulk. This heterogeneity in the deformability reduces the strain intensification at the crack tip explaining the high fatigue resistance in TPU. The local stiffening was ultimately associated to the fragmentation of original hard domains in smaller but more numerous units increasing the degree of physical crosslinking
Firko, Megan (Megan Rose). « Hot micro-embossing of thermoplastic elastomers ». Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/54461.
Texte intégral"June 2008." Cataloged from PDF version of thesis.
Includes bibliographical references (p. 69-71).
Microfluidic devices have been a rapidly increasing area of study since the mid 1990s. Such devices are useful for a wide variety of biological applications and offer the possibility for large scale integration of fluidic chips, similar to that of electrical circuits. With this in mind, the future market for microfluidic devices will certainly thrive, and a means of mass production will be necessary. However PDMS, the current material used to fabricate the flexible active elements central to many microfluidic chips, imposes a limit to the production rate due to the curing process used to fabricate devices. Thermoplastic elastomers (TPEs) provide a potential alternative to PDMS. Soft and rubbery at room temperature, TPEs become molten when heated and can be processed using traditional thermoplastic fabrication techniques such as injection molding or casting. One promising fabrication technique for TPEs is hot micro-embossing (HME) in which a material is heated above its glass transition temperature and imprinted with a micromachined tool, replicating the negative of the tools features. Thus far, little research has been conducted on the topic of hot embossing TPEs, and investigations seeking to determine ideal processing conditions are non-existent. This investigation concerns the selection of a promising TPE for fabrication of flexible active elements, and the characterization of the processing window for hot embossing this TPE using a tool designed to form long winding channels, with feature heights of 66Cpm and widths of 80jpm. Ideal processing conditions for the tool were found to be pressures in the range of 1MPa-1.5MPa and temperatures above 1400.
(cont.) The best replication occurred at 1500 C and 1.5 MPa, and at these conditions channel depth was within 5% of the tool, and width was within 10%. For some processing conditions a smearing effect due to bulk material flow was observed. No upper limit on temperature was found, suggesting that fabrication processes in which the material is fully melted may also be suitable for fabrication of devices from TPEs.
by Megan Firko.
S.B.
Miller, Paul. « Sulfur Mustard penetration of thermoplastic elastomers ». Fishermans Bend Vic. : Defence Science and Technology Organisation, 2008. http://nla.gov.au/nla.arc-24764.
Texte intégralCanevarolo, Sebastiao V. « Melt behaviour of thermoplastic rubbers ». Thesis, Loughborough University, 1986. https://dspace.lboro.ac.uk/2134/27871.
Texte intégralPattern, Wayne Eric. « The synthesis and characterisation of novel thermoplastic elastomers ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0004/MQ30718.pdf.
Texte intégralLivres sur le sujet "Elastomeric thermoplastic"
Mongiello, Joseph. Thermoplastic elastomers. Norwalk, CT (25 Van Zant Street, Norwalk 06855) : Business Communications Co., 1989.
Trouver le texte intégralJoseph, Mongiello, et Business Communications Co, dir. Thermoplastic elastomers : New expectations. Stamford, Conn., U.S.A : Business Communications Co., 1985.
Trouver le texte intégralEl-Sonbati, Adel Zaki. Thermoplastic elastomers. Rijeka, Croatia : InTech, 2012.
Trouver le texte intégralGeoffrey, Holden, Quirk Randolph P, Schroeder Herman E et Legge Norman R, dir. Thermoplastic elastomers. 2e éd. Munich : Hanser, 1996.
Trouver le texte intégralLimited, Rapra Technology, dir. New opportunities for thermoplastic elastomers : A one-day seminar. Shawbury : RAPRA Technology, 1996.
Trouver le texte intégralWalker, Benjamin M., et Charles P. Rader, dir. Handbook of Thermoplastic Elastomers. Boston, MA : Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1671-8.
Texte intégralM, Walker Benjamin, et Rader Charles P. 1935-, dir. Handbook of thermoplastic elastomers. 2e éd. New York : Van Nostrand Reinhold, 1988.
Trouver le texte intégralR, Legge N., Holden G et Schroeder H. E, dir. Thermoplastic elastomers : A comprehensive review. Munich : Hanser Publishers, 1987.
Trouver le texte intégralStoĭko, Fakirov, dir. Handbook of condensation thermoplastic elastomers. Weinheim : Wiley-VCH, 2005.
Trouver le texte intégral1941-, De S. K., et Bhowmick Anil K. 1954-, dir. Thermoplastic elastomers from rubber-plastic blends. New York : Ellis Horwood, 1990.
Trouver le texte intégralChapitres de livres sur le sujet "Elastomeric thermoplastic"
Rader, Charles P. « Elastomeric Alloy Thermoplastic Vulcanizates ». Dans Handbook of Thermoplastic Elastomers, 85–140. Boston, MA : Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1671-8_4.
Texte intégralAwasthi, Pratiksha, Aiswarya S et Shib Shankar Banerjee. « Thermoplastic Elastomeric Foams : Challenges, Opportunities and New Approaches ». Dans ACS Symposium Series, 91–119. Washington, DC : American Chemical Society, 2023. http://dx.doi.org/10.1021/bk-2023-1439.ch005.
Texte intégralAiswarya, S., Pratiksha Awasthi, Nischay Kodihalli Shivaprakash, A. Wayne Cooke, Subhan Salaeh et Shib Shankar Banerjee. « High-temperature thermoplastic elastomeric materials by electron beam treatment – Challenges and opportunities ». Dans Radiation Technologies and Applications in Materials Science, 257–86. Boca Raton : CRC Press, 2022. http://dx.doi.org/10.1201/9781003321910-10.
Texte intégralCoran, A. Y., et R. P. Patel. « Thermoplastic elastomers based on elastomer/thermoplastic blends dynamically vulcanized ». Dans Reactive Modifiers for Polymers, 349–94. Dordrecht : Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1449-0_9.
Texte intégralBashford, David. « Thermoplastic Elastomers (TPE) ». Dans Thermoplastics, 339–52. Dordrecht : Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1531-2_61.
Texte intégralGooch, Jan W. « Thermoplastic Elastomers ». Dans Encyclopedic Dictionary of Polymers, 746. New York, NY : Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11796.
Texte intégralAoyagi, Takeshi. « Thermoplastic Elastomers ». Dans Computer Simulation of Polymeric Materials, 249–67. Singapore : Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0815-3_16.
Texte intégralHolden, Geoffrey. « Thermoplastic Elastomers ». Dans Rubber Technology, 465–81. Dordrecht : Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-017-2925-3_16.
Texte intégralRader, Charles P. « Thermoplastic Elastomers ». Dans Rubber Technology, 264–83. München : Carl Hanser Verlag GmbH & Co. KG, 2009. http://dx.doi.org/10.3139/9783446439733.010.
Texte intégralBruder, Ulf. « Thermoplastic Elastomers ». Dans User's Guide to Plastic, 27–32. München : Carl Hanser Verlag GmbH & Co. KG, 2015. http://dx.doi.org/10.3139/9781569905739.004.
Texte intégralActes de conférences sur le sujet "Elastomeric thermoplastic"
Rodriguez, Oscar O., Arturo A. Fuentes, Constantine Tarawneh et Robert E. Jones. « Hysteresis Heating of Railroad Bearing Thermoplastic Elastomer Suspension Element ». Dans 2017 Joint Rail Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/jrc2017-2257.
Texte intégralMeesche, Anton Van, Robert D. Banning, Satish J. Doshi et Charles P. Rader. « Flocking of Elastomeric Alloy Thermoplastic Rubber Profiles ». Dans International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1991. http://dx.doi.org/10.4271/910108.
Texte intégralSundararajan, Raji, Claudio Olave, Edwin Romero et A. M. Kannan. « Impedance analysis of long term aged thermoplastic elastomeric insulators ». Dans 2007 Annual Report - Conference on Electrical Insulation and Dielectric Phenomena. IEEE, 2007. http://dx.doi.org/10.1109/ceidp.2007.4451626.
Texte intégralPowell, Bernard. « Silicone Elastomeric Adhesives for the Thermoplastic Automotive Bumper Systems ». Dans International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1990. http://dx.doi.org/10.4271/900771.
Texte intégralDev, Bodhayan, Jifeng Wang, Om P. Samudrala et Qi Xuele. « Characterization of thermoplastic-elastomeric seals at high pressures and temperatures ». Dans 52nd AIAA/SAE/ASEE Joint Propulsion Conference. Reston, Virginia : American Institute of Aeronautics and Astronautics, 2016. http://dx.doi.org/10.2514/6.2016-4922.
Texte intégralChen, Chien-Fu, Jikun Liu, Chien-Cheng Chang et Don L. DeVoe. « High Pressure On-Chip Valves for Thermoplastic Microfluidics ». Dans ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11760.
Texte intégralRizvi, Reza, Hani Naguib et Elaine Biddiss. « Characterization of a Porous Multifunctional Nanocomposite for Pressure Sensing ». Dans ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8178.
Texte intégralAmin, Salman, Muhammad Amin et Raji Sundrarajan. « Comparative Multi Stress Aging of Thermoplastic Elastomeric and Silicone Rubber Insulators in Pakistan ». Dans 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2008. http://dx.doi.org/10.1109/ceidp.2008.4772914.
Texte intégralVargantwar, Pruthesh H., Tushar K. Ghosh et Richard J. Spontak. « Novel thermoplastic elastomeric gels as high-performance actuators with no mechanical pre-strain ». Dans SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, sous la direction de Yoseph Bar-Cohen et Thomas Wallmersperger. SPIE, 2009. http://dx.doi.org/10.1117/12.816060.
Texte intégralSaha, Subhabrata, et Anil k. Bhowmick. « Understanding Polyvinylidene Fluoride based Thermoplastic Elastomeric Blends : A Combined Simulation and Experimental Study ». Dans 200th Fall Technical Meeting of the Rubber Division, American Chemical Society 2021. Akron, Ohio, USA : Rubber Division, American Chemical Society, 2021. http://dx.doi.org/10.52202/064426-0039.
Texte intégralRapports d'organisations sur le sujet "Elastomeric thermoplastic"
Fletcher, R. W., et H. W. Cheung. Energetic Thermoplastic Elastomer Synthesis. Fort Belvoir, VA : Defense Technical Information Center, janvier 1989. http://dx.doi.org/10.21236/ada203594.
Texte intégralManser, G. E., et R. W. Fletcher. Energetic Thermoplastic Elastomer Synthesis. Fort Belvoir, VA : Defense Technical Information Center, avril 1988. http://dx.doi.org/10.21236/ada196885.
Texte intégralChien, James C. Thermoplastic Elastomer LOVA Binders. Fort Belvoir, VA : Defense Technical Information Center, mai 1991. http://dx.doi.org/10.21236/ada236586.
Texte intégralSalazar, Laura Ann. Functionalized Materials From Elastomers to High Performance Thermoplastics. Office of Scientific and Technical Information (OSTI), janvier 2003. http://dx.doi.org/10.2172/815764.
Texte intégralStephens, Thomas. Solventless Manufacture of Artillery Propellant Using Thermoplastic Elastomer Binder, PP-867. Fort Belvoir, VA : Defense Technical Information Center, janvier 1999. http://dx.doi.org/10.21236/ada379638.
Texte intégral