Articles de revues sur le sujet « EDM Products »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « EDM Products ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
SAKAI, Shigenori, Takahisa MASUZAWA et Shin ITOU. « Finishing of EDM products by ECM using a mate-electrode. » Journal of The Japan Society of Electrical Machining Engineers 22, no 43 (1988) : 18–28. http://dx.doi.org/10.2526/jseme.22.18.
Texte intégralAblyaz, Timur Rizovich, Evgeny Sergeevich Shlykov, Karim Ravilevich Muratov et Alexander Valentinovich Zhurin. « Study of the EDM Process of Bimetallic Materials Using a Composite Electrode Tool ». Materials 15, no 3 (19 janvier 2022) : 750. http://dx.doi.org/10.3390/ma15030750.
Texte intégralChang, Wei Jie, Yan Ying Xi et Hao Wei Li. « Simulation of Gap Flow Field in EDM Process Uesd Oil-in-Water Working Fluid ». Key Engineering Materials 841 (mai 2020) : 232–37. http://dx.doi.org/10.4028/www.scientific.net/kem.841.232.
Texte intégralBanu, Asfana, et Mohammad Yeakub Ali. « Electrical Discharge Machining (EDM) : A Review ». International Journal of Engineering Materials and Manufacture 1, no 1 (3 septembre 2016) : 3–10. http://dx.doi.org/10.26776/ijemm.01.01.2016.02.
Texte intégralGoossens, An. « Skin allergy in children caused by consumer products ». Expert Review of Dermatology 6, no 3 (juin 2011) : 237–39. http://dx.doi.org/10.1586/edm.11.18.
Texte intégralShlykov, Evgenii, Timir Ablyaz et Karim Muratov. « Theoretical simulation of the process interelectrode space flushing during copy-piercing EDM of products made of polymer composite materials ». Metal Working and Material Science 24, no 2 (15 juin 2022) : 25–38. http://dx.doi.org/10.17212/1994-6309-2022-24.2-25-38.
Texte intégralXu, Chengcheng, Fangchao Xu, Feng Sun, Xiaoyou Zhang, Junjie Jin, Boran Luan et Koichi Oka. « Research on an Intelligent Control Method of a Magnetic Actuator for Micro Electrical Discharge Machining ». Actuators 11, no 12 (9 décembre 2022) : 371. http://dx.doi.org/10.3390/act11120371.
Texte intégralNikolić, Saša, Sven Gohla et Rainer H. Müller. « Lipid nanoparticles : nanocarriers for more effective and safer photoprotective products ». Expert Review of Dermatology 6, no 5 (octobre 2011) : 501–7. http://dx.doi.org/10.1586/edm.11.56.
Texte intégralKatz, Z., et J. Naude. « A Neural Network/Expert System Approach for Design Improvement of Products Manufactured by EDM ». Journal of Manufacturing Science and Engineering 121, no 4 (1 novembre 1999) : 733–38. http://dx.doi.org/10.1115/1.2833127.
Texte intégralYadav, Sandeep, Deepak k, Sarthak Sharma et Lalit Vashishth. « Study the effect of process parameters on Electric Discharge Machining : Literature Review ». INTERNATIONAL JOURNAL OF ADVANCED PRODUCTION AND INDUSTRIAL ENGINEERING 4, no 1 (5 janvier 2019) : 68–80. http://dx.doi.org/10.35121/ijapie201901140.
Texte intégralAblyaz, Timur Rizovich, Evgeny Sergeevich Shlykov, Karim Ravilevich Muratov, Ilya Vladimirovich Osinnikov, Mikhail Vladimirovich Bannikov et Sarabjeet Singh Sidhu. « Investigation of Plasma-Electrolytic Processing on EDMed Austenitic Steels ». Materials 16, no 11 (1 juin 2023) : 4127. http://dx.doi.org/10.3390/ma16114127.
Texte intégralShlykov, Evgenii, et Timur Ablyaz. « Improving the Efficiency of EDM Processing of Complex Elements of Products ». Metal Working and Material Science 21, no 2 (14 juin 2019) : 53–61. http://dx.doi.org/10.17212/1994-6309-2019-21.2-53-61.
Texte intégralAli, Mohammad Yeakub, Asfana Banu, Mohamed Abdul Rahman, Muataz Hazza Faizi Al Hazza et Erry Yulian Triblas Adesta. « Precision Control of Kerf in Metal Cutting Using Dry Micro WEDM : Issues and Challenges ». Key Engineering Materials 775 (août 2018) : 499–505. http://dx.doi.org/10.4028/www.scientific.net/kem.775.499.
Texte intégralChaubey, Sujeet Kumar, et Kapil Gupta. « A review on Wire-EDM of bio titanium ». Reports in Mechanical Engineering 4, no 1 (3 septembre 2023) : 141–52. http://dx.doi.org/10.31181/rme040103092023c.
Texte intégralPhan, Nguyen Huu. « ANALYSIS OF SURFACE LAYERS OF HOT – FORGING DIES OF SKD61 STEEL FABRICATED BY DIE – SINKING ELECTRICAL DISCHARGE MACHINING USING COPPER AND TITANIUM ELECTRODES ». Vietnam Journal of Science and Technology 54, no 5A (22 mars 2018) : 19. http://dx.doi.org/10.15625/2525-2518/54/5a/12057.
Texte intégralHourmand, M., et M. Y. Noordin. « Micro-Electrode Fabrication Process Using EDM ». Advanced Materials Research 845 (décembre 2013) : 980–84. http://dx.doi.org/10.4028/www.scientific.net/amr.845.980.
Texte intégralSubbian, Kanmani Subbu, Ramkumar Janakarajan et Dhamodaran Santhanagopalan. « Plasma Temperature and Electron Density of Dry µ-EDM on Stainless Steel and Silicon : A Comparison ». International Journal of Automation Technology 5, no 1 (5 janvier 2011) : 45–51. http://dx.doi.org/10.20965/ijat.2011.p0045.
Texte intégralStraka, Luboslav, et Gabriel Dittrich. « Design of Manufacturing Process of Mould for Die Casting by EDM Technology with the Computer Aided ». International Journal of Engineering and Management Sciences 5, no 2 (15 avril 2020) : 57–63. http://dx.doi.org/10.21791/ijems.2020.2.7.
Texte intégralTebni, Wissem, M. Boujelbene et E. Bayraktar. « Parametric Approach Model for Determining Electrical Discharge Machining (EDM) Conditions : Effect of Cutting Parameters on the Surface Integrity ». Advanced Materials Research 83-86 (décembre 2009) : 725–37. http://dx.doi.org/10.4028/www.scientific.net/amr.83-86.725.
Texte intégralBaghel, Rupali. « Machinability of Non-Conductive Ceramic by EDM : A Review ». IOP Conference Series : Materials Science and Engineering 1224, no 1 (1 janvier 2022) : 012003. http://dx.doi.org/10.1088/1757-899x/1224/1/012003.
Texte intégralPereira Navaza, P., E. Ares, Jose L. Diéguez et A. Pereira. « Manufacture of Electrodes for Electro-Discharge Machining (EDM) of Complex Surfaces in Moulds ». Materials Science Forum 526 (octobre 2006) : 145–50. http://dx.doi.org/10.4028/www.scientific.net/msf.526.145.
Texte intégralAbbas, Norliana Mohd, et Darius Gnanaraj Solomon. « Electrical Discharge Machining (EDM) : Selection of Dielectric in Machining ASSAB 718HH ». Advanced Materials Research 622-623 (décembre 2012) : 520–24. http://dx.doi.org/10.4028/www.scientific.net/amr.622-623.520.
Texte intégralYi, Guanwei, Guangyu Guo, Mingfang Zhang et Mengyou Huo. « Simulation and Experimental Research on Low-Frequency Vibration and Rotation Assisted Micro-EDM Gap Flow Field ». Journal of Physics : Conference Series 2463, no 1 (1 mars 2023) : 012032. http://dx.doi.org/10.1088/1742-6596/2463/1/012032.
Texte intégralJatti, Vijaykumar S., Nitin K. Khedkar, Vinaykumar S. Jatti et Pawandeep Dhall. « Investigating the effect of cryogenic treatment of workpieces and tools on electrical discharge machining performance ». AIMS Materials Science 9, no 6 (2022) : 835–62. http://dx.doi.org/10.3934/matersci.2022051.
Texte intégralOlinik, Ricardo, et Paulo Andre de Camargo Beltrão. « Influence of Correlation between Electrical Discharge Machining Parameters with the Formation of Surface Defect’s in Products Machined by EDM ». Advanced Materials Research 223 (avril 2011) : 950–59. http://dx.doi.org/10.4028/www.scientific.net/amr.223.950.
Texte intégralTanaka, Hidetake, Yuta Fukada et Ryuta Kuboshima. « Feasibility Study of EDM-Assisted Combined Turning for Unidirectional CFRP ». International Journal of Automation Technology 16, no 5 (5 septembre 2022) : 536–42. http://dx.doi.org/10.20965/ijat.2022.p0536.
Texte intégralOlenovych, О. А. « Peculiarities of acid-releasing renal function of rats in the dynamics of experimental diabetes mellitus with underlying pharmacological blockade of renin-angiotensin-aldosterone system ». Reports of Vinnytsia National Medical University 24, no 3 (12 octobre 2020) : 381–88. http://dx.doi.org/10.31393/reports-vnmedical-2020-24(3)-02.
Texte intégralShlykov, E. S., T. R. Ablyaz, K. R. Muratov et D. I. Tokarev. « Influence of Wire EDM on the Surface Roughness of Products Obtained by Laser Surfacing ». Russian Engineering Research 40, no 10 (octobre 2020) : 876–77. http://dx.doi.org/10.3103/s1068798x20100263.
Texte intégralChen, Qing, Zhengwu Jiang, Hehua Zhu, J. Woody Ju, Zhiguo Yan et Yaqiong Wang. « An Improved Micromechanical Framework for Saturated Concrete Repaired by the Electrochemical Deposition Method considering the Imperfect Bonding ». Journal of Engineering 2016 (2016) : 1–11. http://dx.doi.org/10.1155/2016/1894027.
Texte intégralGupta, Kapil. « Investigation on Fabrication of SS316 Gear by Wire-EDM ». MATEC Web of Conferences 346 (2021) : 01044. http://dx.doi.org/10.1051/matecconf/202134601044.
Texte intégralKaneko, Kensei, Ken Yamashita et Yasushi Fukuzawa. « The Machining Characteristics of Insulating AlN Ceramics by EDM ». Key Engineering Materials 523-524 (novembre 2012) : 328–31. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.328.
Texte intégralSundriyal, S., Vipin et RS Walia. « Experimental investigation and performance enhancements characteristics of gaseous assisted powder mixed near dry electric discharge machining ». Proceedings of the Institution of Mechanical Engineers, Part E : Journal of Process Mechanical Engineering 235, no 4 (18 janvier 2021) : 1048–58. http://dx.doi.org/10.1177/0954408920988424.
Texte intégralNieciąg, Halina, Rafał Kudelski et Krzysztof Zagórski. « The use of artificial intelligence to model the geometric state of the surface after EDM machining of tool steels ». AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe 19, no 12 (31 décembre 2018) : 570–74. http://dx.doi.org/10.24136/atest.2018.454.
Texte intégralGhani, Jaharah A., Geok Yong Goh et Che Hassan Che Haron. « Surface Integrity of AISI H13 in End Milling and Electrical Discharge Machining Process ». Advanced Materials Research 264-265 (juin 2011) : 1044–49. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.1044.
Texte intégralAblyaz, Timur Rizovich, Evgeny Sergeevich Shlykov et Karim Ravilevich Muratov. « Improving the Efficiency of Electrical Discharge Machining of Special-Purpose Products with Composite Electrode Tools ». Materials 14, no 20 (15 octobre 2021) : 6105. http://dx.doi.org/10.3390/ma14206105.
Texte intégralAbbas, Ahmed Mohammed, et Ali Abbar Khleif. « EDM Electrode Design and Analysis to Enhance Process Performance ». Tikrit Journal of Engineering Sciences 30, no 4 (13 décembre 2023) : 145–52. http://dx.doi.org/10.25130/tjes.30.4.15.
Texte intégralYu, Z. Y., K. P. Rajurkar et A. Tandon. « Study of 3D Micro-Ultrasonic Machining ». Journal of Manufacturing Science and Engineering 126, no 4 (1 novembre 2004) : 727–32. http://dx.doi.org/10.1115/1.1813482.
Texte intégralYudo, Eko, et Zaldy Kurniawan. « Analisa Kekasaran Permukaan Pada Proses Edm Sinking Menggunakan Metoda Response Surface Methodology ». Manutech : Jurnal Teknologi Manufaktur 10, no 01 (17 mai 2019) : 17–23. http://dx.doi.org/10.33504/manutech.v10i01.54.
Texte intégralKaneko, Kensei, et Yasushi Fukuzawa. « Characteristics of Micro EDM for Insulating Aluminum Nitride Ceramics ». Advanced Materials Research 579 (octobre 2012) : 86–91. http://dx.doi.org/10.4028/www.scientific.net/amr.579.86.
Texte intégralNieciąg, Halina, Rafał Kudelski et Krzysztof Zagórski. « Pareto ANOVA analysis of geometrical features of the products machined during EDM adaptative cycle in the Integrated Manufacturing System ». Pomiary Automatyka Robotyka 21, no 4 (30 décembre 2017) : 67–74. http://dx.doi.org/10.14313/par_226/67.
Texte intégralShlykov, Evgenii, Timur Ablyaz et Karim Muratov. « Ensuring the Accuracy of Wire-cutting EDM processing of Products made of Hard-to-Handle Materials ». Metal Working and Material Science 22, no 3 (15 septembre 2020) : 6–17. http://dx.doi.org/10.17212/1994-6309-2020-22.3-6-17.
Texte intégralAmrullah, Amrullah, et Rahman Hakim. « THE EFFECT OF THE PULSE CURRENT IN WIRE ELECTRIC DISCHARGE MACHINE ON MEASUREMENT ERROR TOWARD ALUMINUM ALLOY : AN EXPERIMENTAL STUDY ». JURNAL INTEGRASI 12, no 2 (31 octobre 2020) : 112–15. http://dx.doi.org/10.30871/ji.v12i2.2398.
Texte intégralSadigh, Bahram Lotfi, Samad Nadimi Bavil Oliaei et Samad Dadvandipour. « An Ontology Based Semantic Machine Tool Selection for Multi Scale Wire EDM Processes ». Solid State Phenomena 261 (août 2017) : 470–77. http://dx.doi.org/10.4028/www.scientific.net/ssp.261.470.
Texte intégralRahman, Mustafizur. « Special Issue on Micro/Nano Machining – Processes, Systems and Control ». International Journal of Automation Technology 5, no 1 (5 janvier 2011) : 3. http://dx.doi.org/10.20965/ijat.2011.p0003.
Texte intégralKumar, Sandeep, Subramanian Dhanabalan, Wilma Polini et Andrea Corrado. « Form variation management of products in Inconel 718 obtained through EDM process with circular shape brass electrodes ». International Journal of Machining and Machinability of Materials 24, no 1/2 (2022) : 165. http://dx.doi.org/10.1504/ijmmm.2022.122789.
Texte intégralCorrado, Andrea, Sandeep Kumar, Subramanian Dhanabalan et Wilma Polini. « Form variation management of products in Inconel 718 obtained through EDM process with circular shape brass electrodes ». International Journal of Machining and Machinability of Materials 24, no 1 (2022) : 1. http://dx.doi.org/10.1504/ijmmm.2022.10045605.
Texte intégralSundriyal, Sanjay, Vipin et Ravinderjit Singh Walia. « Experimental Investigation of the Micro-hardness of EN-31 Die Steel in a Powder-Mixed Near-Dry Electric Discharge Machining Method ». Strojniški vestnik – Journal of Mechanical Engineering 66, no 3 (15 mars 2020) : 184–92. http://dx.doi.org/10.5545/sv-jme.2019.6474.
Texte intégralKiselevG., M. G., P. S. Bohdan, M. M. Kryshnev et V. P. Semenkovich. « INFLUENCE OF EDM WORN SURFACE OF THE WORKING PART OF STEEL BORON TOOTH TO RESTORE ITS CUTTING ABILITY ». Science & ; Technique 16, no 3 (26 mai 2017) : 189–95. http://dx.doi.org/10.21122/2227-1031-2017-16-3-189-195.
Texte intégralElmenshawy, S. K., Mohammad A. Younes et Hassan El-Hofy. « Electro Discharge Machining of AL2O3 Based Ceramic ». Key Engineering Materials 625 (août 2014) : 511–17. http://dx.doi.org/10.4028/www.scientific.net/kem.625.511.
Texte intégralRachman, Farizi Rachman, Tri Andi Setiawan, Bayu Wiro Karuniawan et Risma Aris Maya. « Penerapan Metode Taguchi Dalam Optimasi Parameter Pada Proses Electrical Discharge Machining (EDM) ». J Statistika : Jurnal Ilmiah Teori dan Aplikasi Statistika 12, no 1 (31 juillet 2019) : 7–12. http://dx.doi.org/10.36456/jstat.vol12.no1.a1991.
Texte intégral