Bibliographies thématiques / EDM Products

Littérature scientifique sur le sujet « EDM Products »

Auteur : Grafiati
Publié le 18 mai 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « EDM Products ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "EDM Products"

1

SAKAI, Shigenori, Takahisa MASUZAWA et Shin ITOU. « Finishing of EDM products by ECM using a mate-electrode. » Journal of The Japan Society of Electrical Machining Engineers 22, no 43 (1988) : 18–28. http://dx.doi.org/10.2526/jseme.22.18.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Ablyaz, Timur Rizovich, Evgeny Sergeevich Shlykov, Karim Ravilevich Muratov et Alexander Valentinovich Zhurin. « Study of the EDM Process of Bimetallic Materials Using a Composite Electrode Tool ». Materials 15, no 3 (19 janvier 2022) : 750. http://dx.doi.org/10.3390/ma15030750.

Texte intégral
Résumé :
New types of profile products make complex use of bimetals. These materials possess a set of properties such as strength, corrosion resistance, thermal conductivity, heat resistance, wear resistance. For the processing of such products, it is advisable to use electrophysical processing methods, one of which is the technology of copy-piercing electrical discharge machining (EDM). Currently, EDM is one of the most common methods for processing products from modern bimetal materials. An urgent task is to study the EDM process of bimetallic materials. The aim of the work was to increase the efficiency and accuracy of the EDM process of bimetallic products using electrode-tools with different physical and mechanical properties. Bimetal—weld coated steel backing, base material—09G2S steel, surfacing material—M1 copper were used. The processing of the bimetallic workpiece was carried out on an Electronica Smart CNC copy-piercing EDM machine. EI used graphite, copper, and composite. A theoretical model was developed that allows calculation of the amount of removal of bimetallic material of steel–copper depending on the EDM modes and the ET (electrode tool) material. During the processing of the steel layer, regardless of the EI material, microcracks were formed along the grain boundaries, and during the processing of the copper layer, enlarged holes resulted.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Chang, Wei Jie, Yan Ying Xi et Hao Wei Li. « Simulation of Gap Flow Field in EDM Process Uesd Oil-in-Water Working Fluid ». Key Engineering Materials 841 (mai 2020) : 232–37. http://dx.doi.org/10.4028/www.scientific.net/kem.841.232.

Texte intégral
Résumé :
Electric Discharge Machining (EDM) working fluid as a medium can control electrical discharges occur, carry away the heat, compress discharge channel and help remove the corrosion products out of the gap. The main working fluids used in EDM are oil-based working fluid, gas-based working fluid, powder mixed working fluid, gas mixed working fluid and water-based working fluid. In order to improve the green and safety of EDM working fluid, an oil-in-water working fluid is proposed. A gap flow field model of EDM is established by using external flushing fluid. The flow field distribution, pressure distribution and corrosion products distribution of the machining gap are analyzed by using computational fluid dynamics. The effects of inlet pressure, processing depth and electrode size on the flow field are studied. The simulated results show that within a certain range, removal effect of the corrosion products will increase with inlet velocity and the size of electrode and decrease with processing depth.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Banu, Asfana, et Mohammad Yeakub Ali. « Electrical Discharge Machining (EDM) : A Review ». International Journal of Engineering Materials and Manufacture 1, no 1 (3 septembre 2016) : 3–10. http://dx.doi.org/10.26776/ijemm.01.01.2016.02.

Texte intégral
Résumé :
Electro discharge machining (EDM) process is a non-conventional and non-contact machining operation which is used in industry for high precision products. EDM is known for machining hard and brittle conductivematerials since it can melt any electrically conductive material regardless of its hardness. The workpiece machined by EDM depends on thermal conductivity, electrical resistivity, and melting points of the materials. The tool and the workpiece are adequately both immersed in a dielectric medium, such as, kerosene, deionised water or any other suitable fluid. This paper is reviewed comprehensively on types of EDM operation. A brief discussion is also done on the machining responses and mathematical modelling.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Goossens, An. « Skin allergy in children caused by consumer products ». Expert Review of Dermatology 6, no 3 (juin 2011) : 237–39. http://dx.doi.org/10.1586/edm.11.18.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Shlykov, Evgenii, Timir Ablyaz et Karim Muratov. « Theoretical simulation of the process interelectrode space flushing during copy-piercing EDM of products made of polymer composite materials ». Metal Working and Material Science 24, no 2 (15 juin 2022) : 25–38. http://dx.doi.org/10.17212/1994-6309-2022-24.2-25-38.

Texte intégral
Résumé :
Introduction. Polymer composite materials (PCM) are used to improve the mechanical properties and increase the working period of products. For the processing of products made of PCM, the use of electrophysical processing methods is standard. One of these methods is copy-piercing electrical discharge machining (EDM). The use of such methods for processing PCM is due to its high physical and mechanical characteristics and the complexity of processing by blade methods. Considering the fact that the PCM element is a binder – epoxy resin, which is destroyed at the edges of the resulting holes and grooves during EDM, PCM can be considered difficult to process. During the EDM of holes in PCM products, the temperature rises, and inefficient cooling often occurs in the processing zone. The paper is devoted to theoretical simulation in the Ansys package, which makes it possible to evaluate the impact of flushing method on the efficiency of the EDM of PCM products based on numerical simulation in finite element analysis software systems. The aim of the work is to increase the productivity of the processes of EDM for PCM products. Methods. Experimental studies were carried out according to the method of a classical experiment on a copy-piercing electrical discharge Smart CNC machine. The workpiece was processed at a constant voltage U = 50 V, pulse on-time Ton = 100 µs and current: I = 10 A. For theoretical simulation of the flow, the ANSYS CFX 20.1 software was used. Flow distribution simulation was carried out at three processing depths (2 mm, 10 mm, 15 mm), as well as at three nozzle inclination angles (15°, 45°, 75°). Results And Discussion. The analysis of the data obtained showed that in the case of the EDM of PCM, the angle of the location of the flushing nozzles should be taken into account in order to increase the productivity of processing deep, blind holes. It is established that the highest performance value is achieved when the nozzles are located at an angle of 15˚. The laminar motion prevails. With this arrangement of the nozzles, the value of the liquid pressure and the removal of the sludge are stable both with the EDM of PCM to a depth of 2 mm, and when processing to a depth of 15 mm. It is noted that for processing holes with a depth of 10 mm or more, it is worth considering the angle of inclination of the flushing nozzle for effective processing, it is necessary to remove eroded particles from the gap. In the process of conducting an experimental study, when processing holes with a depth of 15 mm, sticking of sludge to the electrode-tool was observed, as well as the closure of the EDM process, the occurrence of secondary discharges in the processing zone, which caused the processing to stop.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Xu, Chengcheng, Fangchao Xu, Feng Sun, Xiaoyou Zhang, Junjie Jin, Boran Luan et Koichi Oka. « Research on an Intelligent Control Method of a Magnetic Actuator for Micro Electrical Discharge Machining ». Actuators 11, no 12 (9 décembre 2022) : 371. http://dx.doi.org/10.3390/act11120371.

Texte intégral
Résumé :
Electrical discharge machining (EDM) is not limited to the strength and hardness of conductive materials, and is a non-contact special processing technology. In micro-EDM, there are problems such as untimely axial positioning, unstable inter-electrode machining voltage, and difficulty in discharging inter-electrode electric erosion products. This paper considers a magnetic actuator with fast response and high accuracy as the local actuator for a micro-EDM. By introducing a domain adjustment mechanism, a variable domain fuzzy PID controller was designed to control the inter-electrode voltage control system of the magnetic actuator for micro-EDM using an intelligent control strategy. During the micro-EDM machining process, the controlled magnetic actuator drives the tool electrode in the axial direction for rapid micro-positioning, thus maintaining effective inter-electrode machining voltage and achieving a high-speed and high precision EDM. Simulation and experimental results showed that compared with traditional micro-EDM, the machining efficiency of the variable domain fuzzy PID control magnetic actuator, and traditional micro-EDM cooperative control, was increased by 40%, the machining process was more stable, and the quality of the machined surface was better.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Nikolić, Saša, Sven Gohla et Rainer H. Müller. « Lipid nanoparticles : nanocarriers for more effective and safer photoprotective products ». Expert Review of Dermatology 6, no 5 (octobre 2011) : 501–7. http://dx.doi.org/10.1586/edm.11.56.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Katz, Z., et J. Naude. « A Neural Network/Expert System Approach for Design Improvement of Products Manufactured by EDM ». Journal of Manufacturing Science and Engineering 121, no 4 (1 novembre 1999) : 733–38. http://dx.doi.org/10.1115/1.2833127.

Texte intégral
Résumé :
The stochastic nature of the electro discharge machining (EDM) process does not allow for a precise prediction of its effect on the machined features. However, there is a direct interrelation between feature design and the process results. The objective of this work is to suggest a neural network based system to facilitate and optimize the design process of products to be machined by EDM. A comprehensive analysis by a neural network and expert system is presented. Aspects of features coding and relations with the process parameters are discussed. Experimental results confirm design improvements and a practical system is described.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Yadav, Sandeep, Deepak k, Sarthak Sharma et Lalit Vashishth. « Study the effect of process parameters on Electric Discharge Machining : Literature Review ». INTERNATIONAL JOURNAL OF ADVANCED PRODUCTION AND INDUSTRIAL ENGINEERING 4, no 1 (5 janvier 2019) : 68–80. http://dx.doi.org/10.35121/ijapie201901140.

Texte intégral
Résumé :
Electrical discharge machining (EDM) is one of the earliest non-conventional method of manufacturing processes. This process based on thermoelectric energy between work piece and electrodeand they must have electrical conductivity to generate the spark. A spark generated between work piece and electrode, and removes the material from work piece through melting and vaporizing. EDM produced various types of products such as dies and moulds. EDM is used to manufacture the parts of aerospace, automotive industry and surgical components. The effect of the machining parameters on surface roughness, metal removal rateand tool wear rate are studied.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "EDM Products"

1

Roy, Dinesh Chandra. « Computer aided process planning for EDM products ». Thesis, University of North Bengal, 2002. http://ir.nbu.ac.in/handle/123456789/1030.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Kaya, Rabi, et Anders Ödling. « Development of an EDM-tool for theNuclear Industry ». Thesis, KTH, Maskinkonstruktion (Inst.), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-156718.

Texte intégral
Résumé :
Electric Discharge Machining (EDM) is a machining method suitable for repair and maintenance operations in nuclear power plants. Crack removal and material sampling are two common operations where EDM is used in the nuclear power industry. Each crack removal or material sampling operation is unique, a new EDM-tool is therefore designed for every operation. This, together with the fact that the electrode used in the EDM-tool usually wears out before the crack is removed or the sample has been collected, is the foundation of this thesis. The objective was to develop one or several concepts of a modular EDM-tool with the ability to change electrode at repair location. This to shorten the development time for EDM-tools and the time for electrode change during an EDM operation. The concepts would be developed to the extent that a prototype could be manufactured and tested. The result is in accordance to the objective with one fully developed concept ready for manufacturing. It has not yet been manufactured, and therefore not been tested. There are still some sections of the tool that needs to be verified, for example the electric supply to the electrode. The concept consists of; a slim EDM-tool with the ability to lock the rotating electrode shaft, compact dielectric fluid- and electric-supply, hydraulic actuator with belt drive and an electrode magazine with place for 3 electrodes. Keywords: Nuclear, EDM, Electric Discharge Machining, Product development, Crack removal
Electric Discharge Machining (EDM) är en avverkningsmetod lämplig för reparations- och underhållsarbete i kärnkraftverk. Sprickbortagning och materialprovtagning är två vanliga operationer som utförs med hjälp av EDM inom kärnkraftsindustrin. Varje sprickbortagningsoch materialprovtagnings operation är unik, därför utvecklas ett nytt EDM-verktyg inför varje operation. Detta tillsammans med det faktum att elektroden som används i EDM-verktyget ofta slits ned innan sprickan har avverkats eller provet har tagits ligger till grund för detta examensarbete. Målet var att utveckla ett eller flera koncept av modulära EDM-verktyg med möjligheten att byta elektrod på plats där aktuell reparation utförs. Detta för att korta ned utvecklingstiden för nya EDM-verktyg och minska tiden för reparations och underhållsarbeten. Koncepten skulle utvecklas så långt att en prototyp kunde tillverkas och testas. Resultatet är i linje med målet, ett välutvecklat koncept som är redo för tillverkning och testning. Det har än så länge inte blivit tillverkat och således inte testats. Konceptet består av ett smalt EDM-verktyg med möjlighet att låsa elektrodrotationen, kompakt dielektrikum- och ström-tillförsel, hydraulisk aktuator med kuggremsdrift och ett elektrodmagasin med plats för 3 elektroder. Nyckelord: Kärnkraft, EDM, Electric Discharge Machining, Produktutveckling, Sprickborttagning
Styles APA, Harvard, Vancouver, ISO, etc.
3

Jakeš, Jan. « Trendy použití elektroerozivních technologií ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228107.

Texte intégral
Résumé :
In this work, description of a basic principle of electro discharge machining and its technological possibilities was made. Possibilities of individual EDM machine producers and their comparison were described. Furthermore, the use of electro discharge machining in Zdas a.s. was shown. Trends in a development of the electro discharge technology are included, too.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Safdar, Adnan. « Microstructures and surface roughness of EBM produced Ti-6Al-4V ». Licentiate thesis, Malmö högskola, Teknik och samhälle, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-7791.

Texte intégral
Résumé :
The work presented in this dissertation is concerned with the microstructures andsurface roughness of test slabs of Ti-6Al-4V produced by one of powder based AdditiveManufacturing (AM) technique namely Electron Beam melting (EBM). The effects of processparameters of a EBM system and geometry factors of a EBM build such as slabs’ thickness andheight etc. on the microstructure and the surface roughness of the EBM produced Ti-6Al-4Vhave being investigated. The processing parameters of the EBM system involved in the presentwork include beam current, scan speed, offset focus and scanning length etc. In this study threedifferent batches of samples were prepared. Microstructures of EBM built Ti-6Al-4V werestudied using Optical Microscopy (OM), Scanning Electron Microscopy (SEM), TransmissionElectron Microscopy (TEM), and X-ray diffraction (XRD). Confocal microscopy and imageanalysis codes ImageJ’s routine SurfCharJ were used to quantify the surface roughness of the testslabs. The microstructures of EBM built Ti-6Al-4V in general consist of columnar grains of priorβ phase. Inside the columnar grains there is a typical (α+β) microstructure of titanium alloyscontaining Widmanstätten α platelets and rod-shaped β phase. Grain boundary α layer has alsobeen observed on the grain boundaries of prior b columnar grains. By using TEM, the β phase inEBM built Ti-6Al-4V has been identified as a rod-like structure located on the grain boundariesof the fine a grains and often grows up along the build direction. The size of the β rods is about200nm and the distance between the β rods is ranged between 0.5 -2μm. Chemical compositionsfor different phases have been measured by TEM/EDX and volume fraction of the β phase in theEBM Ti-6Al-4V has been determined to be 2.7%. The phase transformation sequence in EBMbuilt Ti-6Al-4V has been discussed according to processing history and microstructuresobserved. It has been observed that, the size, number and geometry of prior β columnar graindepend on the sample thickness and other process parameters setting. The diameter of columnargrain varies between 2-70μm. The increase in size, number and regularity of columnar grains hasbeen observed with increase in sample thickness, beam energy density and scanning length.While with increase in height of the build it decreases. The length and smoothness of α plateletsincreases with increase in diameter of prior β columnar grain. The β phase rods are unaffected bysample thickness and process parameter settings. The sample thickness and beam energy densityhas a strong effect on the surface roughness of the test slabs. The value of surface roughnesscoefficient Ra for different test slabs varies between 1-20μm. It is observed that the surfaceroughness increases of the test slab increases with increase in thickness of the slab and beamenergy density. The possible reasons for these variations in microstructures and surfaceroughness have been discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
5

GUPTA, NITIN. « MACHINE LEARNING PREDICTIVE ANALYTIC MODEL TO REDUCE COST OF QUALITY FOR SOFTWARE PRODUCTS ». Thesis, DELHI TECHNOLOGICAL UNIVERSITY, 2021. http://dspace.dtu.ac.in:8080/jspui/handle/repository/18484.

Texte intégral
Résumé :
In today’s world, high quality product are need of the time. The low-quality product results in the high cost. This can be explained from the quality graph below 1) Prevention cost can be define as the issue/bugs found out before the deployment/delivered to customer. This cost is initially very low but in the longer run goes up 2) Failure cost includes cost of losing customers, Root cause analysis and rectification. This cost is defiantly very huge Figure 11 : Cost of Quality Source: https://www.researchgate.net/ 5 If there can be any mechanism that can help to identify the expected issues in the prevention cost then the overall all cost of quality can be reduce as shown in below graph Figure 12 : Modified Cost of Quality Source: https://www.researchgate.net/ Electronic and Design Automation (EDA) Industry is backbone of Semiconductor Industry as it provide software tool aiding in the development of Semi-Conductors chips. EDA tools are from specification to the foundry input. Below figure shows mapping of Chip design verification and currently available tools technologies Modified prevention cost Modified TCQ 6 Figure 13 : Tools offered by EDA Industry Sourced: https://en.wikipedia.org/wiki/Electronic_design_automation Term tape out means the chip out of foundry and ready for use in electronic circuit. Re- spin means incident post Tape-out chips does not function as required and re-build is required. Cost of the tape out is minimum 5 million of dollars. Major re-spin reason is functionality issues, therefore function verification tools delivered by EDA needs to be always of high quality. A major problem faced by the Functional verification tool R&D team is to predict the numbers of the bugs that might have been introduced during the design phase to sign off the completeness and quality. If these bugs can be predicted, then the COQ can be reduced. Hence saving million of dollar to company and customer. Machine learning, a upcoming new discipline, define scientific study of algorithm and using computing power develop prediction model so that certainty of the task can be managed. In this project, prediction model for expected bugs during the development of the software is designed to help the Product manager to get confidence on quality. For the data, explanatory research and Interview was conducted with-in the Synopsys. This project has been successfully adopted with-in the Verification IP group of EDA leader and is in process to get it implemented in all different Business Units.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Zikmund, Martin. « Interconnection between BPM and BI products ». Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-12367.

Texte intégral
Résumé :
Interconnection between various types of IT systems used in an enterprise is crucial in these days. Most of companies are using many different kinds of applications in their daily running of the enterprise which leads to necessity of sharing data across those applications to enable all employees to make a right decision upon correct information. In my diploma thesis I deal with interconnection of two systems -- Business Process Management (BPM) and Business Intelligence (BI). Both systems belong to group of top IT systems with big influence on ongoing business and right decision making on all levels from operational to strategic. My paper contains theoretical as well as practical part of the solution for interconnection of BI and BPM systems. First part is about presenting and describing basic concepts and technologies which are used in process of integration of BI and BPM. At the beginning there is a short introduction to BPM, BI and SOA. Following part is including analysis of three major ways of interconnection between BI and BPM systems. Last part of the first theoretical section presents two products. IBM FileNet P8 representative of BPM system and IBM Cognos 8 BI as a representative of BI system. Second part deals with the practical example of real integration between BI and BPM systems. In first part of this section is simple description of the scenario -- business case. After that there is a detail depiction of two different kinds of integration of BI and BPM. Analysis of benefits, advantages and further possibilities are at the end of work.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Bourdon, Pascal. « Restauration d'images et de séquences d'images par EDP : contributions et applications en communications numériques ». Poitiers, 2004. http://www.theses.fr/2004POIT2321.

Texte intégral
Résumé :
Dans cette thèse, nous nous intéressons à l’utilisation d’opérations de restauration d’images en transmission. Un système de transmission permet de véhiculer un signal entre une source et un destinataire. Le support physique utilisé n'étant pas toujours parfait, ce signal peut présenter des erreurs en réception. En outre, d'autres erreurs peuvent être provoquées par le système de communication lui-même, en particulier en transmission d’images, où seules les données pertinentes vis-à-vis de l’œil humain sont émises. Nous proposons ici d'étudier et de concevoir plusieurs modèles de restauration par Equations aux Dérivées Partielles, afin de réduire l'impact de ces différentes erreurs. Nous proposons en particulier un nouveau modèle de lissage de séquences d'images, ainsi qu'une méthode de inpainting multi-résolution. Les applications porteront sur l'atténuation d'artefacts de compression et la correction d’erreurs pour les codeurs JPEG /MPEG/H26x, et pour un schéma de codage conjoint
This PhD research focuses on image processing in digital communications. A transmission system is a system that transmits information from one place to another through a physical path. Because this path is subject to interference and propagation disturbances, errors can occur during the reception. Additional errors may also be generated by the system itself. In order to achieve better performances, most image coding standards exploit perceptual properties of the human visual system to remove data from the source, thus introducing distortion. In this dissertation, we study and conceive several PDE (Partial Differential Equations)-based models for image restoration, so to attenuate visual impact of these errors. In particular we propose a new image sequence denoising model, as well as a multiresolution inpainting method. Current applications include compression artifacts removal and error correction on JPEG/MPEG/H. 26x images/sequences, and on a joint source/channel coding scheme as well
Styles APA, Harvard, Vancouver, ISO, etc.
8

Schwarz, Oliver, et Christian Kowalewski. « Softwareentwicklung ECM/WCM im Spannungsfeld KMUs–Großunternehmen ». Thelem Universitätsverlag & ; Buchhandlung GmbH & ; Co. KG, 2019. https://tud.qucosa.de/id/qucosa%3A36935.

Texte intégral
Résumé :
Der BIM-Standard hat in den letzten Jahren viel Bewegung in die Softwarelandschaft gebracht. Der Wunsch und die Notwendigkeit, Daten aus der EMC Landschaft mit den digitalen Daten der Planung und dem aktuellen Progress auf den Baustellen zu verbinden, stellt hier einen besonderen Motor dar. Die digitale Bauakte – nur ein Traum? Unternehmen unterschiedlichster Größe und Ausrichtung begleiten durch Ihre Tätigkeiten einen Neu- bzw. Umbau von der Idee bis zur Realisierung. Die Lösungsansätze bzw. Lösungen der Digitalisierung in den verschiedensten Ausprägungen, Tiefen und Teilbereichen existieren. Eine Lösung, die von den KMUs bis hin zu den Konzernen genutzt wird, haben wir aus dem Blickwinkel der Planer, Betreiber und Montageunternehmen im industriellen Anlagenbauumfeld (Industrie- und Produktionsanlagen aller Art) nicht gefunden. Die Lösung von inactio und ESZETT schaut aus zwei unterschiedlichen Blickwinkeln auf die Kunden. Die Abbildung 1 reißt das Spannungsfeld ein wenig an. inactio/eebos begleitet Ihre Kunden im Umfeld von onbase, SAP und digitalen Archiven. ESZETT kommt mit ihren Erfahrungen der Planungswelten, VR-Systemen und dem WCM-System bee aus der Planungs- und Montagebegleitung. Der Wunsch, mit einer kleinen Lösung zu beginnen (KMU), die bei den einzelnen Unternehmen für ihre Belange genutzt werden kann, hin zu der Vernetzung und der Möglichkeit des Einbindens dieser ‚Inseln‘ in einem Gesamtprojekt mit allen technischen Möglichkeiten und Verknüpfungen, soll kein Traum bleiben. [...]
Styles APA, Harvard, Vancouver, ISO, etc.
9

Sanni, Onimisi Calistus. « Microstructural, Mechanical and Tribological Studies of Ti-6Al-4V Thin Plates Produced by EBM Process ». Thesis, Högskolan Dalarna, Materialteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:du-35321.

Texte intégral
Résumé :
The titanium alloy, Ti-6Al-4V, is vastly studied and used in many applications because it has a transformation microstructure, which can be tailored for apt properties that are consistent up to 500°C. Compared to conventional steels, this alloy favours certain applications due to its high specific strength, hardenability, corrosion resistance, biocompatibility and weldability. Its weldability makes the alloy a good candidate for additive manufacturing (AM). Ti-6Al-4V parts are widely built by the AM process of electron beam melting (EBM). However, heat transfer remains crucial in EBM process. The high intensity localized, moving, electron beam heat source and the rapid self-cooling are critical, especially in thin parts/ sections. When thin sections are built by the EBM process, there will be microstructural variation in their build direction, which can lead to the variation of their mechanical properties. It is necessary to understand the microstructure and mechanical properties of thin sections when they are used as functional parts in various applications in aerospace, automotive, medical, etc. industries. The microstructure, tribological behaviour and mechanical properties of Ti-6Al-4V, as-built EBM thin plates were studied by means of various hardness, scratch and tensile testing. The hardness and scratch tests were performed on the thin plates to correlate the microstructural variation. In-situ micro tensile test was performed inside the scanning electron microscope (SEM), to see the sample’s deformation behaviour. Microstructural characterization revealed equiaxed grains in the transverse section and the longitudinal surface exhibited columnar grains elongated along the build direction. The size of the equiaxed grains are found to vary across the thickness of the plate. The indentation and scratch hardness also vary in correlation with the varying grain size across the plate’s thickness. The micro tensile results reveal that the tensile properties of the thin plate are comparable to that of its bulk Ti-6Al-4V counterpart.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Georgieva, Fany. « The Effect of Stealth Advertising in Newscasts on Viewers' Recall ». Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4677.

Texte intégral
Résumé :
Product placement, also referred to as stealth advertising, raises important questions when it comes to television because a far larger audience views television than movies. Product placement in newscasts is even more controversial. Television news is expected to be free of persuasive attempts and provide citizens with basic information that is of public importance. Yet, product placement blurs the line between journalism and commercial promotion, thus destroying the integrity of the news. Product placement in newscasts raises ethical questions about the effect it has on viewers, provided that they do not realize that they are presented with commercials, framed as news story. Yet, this paper argues that, since viewers focus on the actual news and do not elaborate consciously on the advertised product or brand, product placement in newscasts has little effect on their brand recall. To support this hypothesis the paper compares brand recall from product placement and commercials. Results revealed that this hypothesis is partially true. Important discovery from this study is the fact that product placement directly affects news credibility.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "EDM Products"

1

Martin, David. Data elements for an EDI 'Book product information' message. London : Book Industry Communication, 1995.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Martin, David. Data elements for an EDI 'Book product information' message. London : Book Industry Communication, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Tougas, Terrence P., Jolyon P. Mitchell et Svetlana A. Lyapustina, dir. Good Cascade Impactor Practices, AIM and EDA for Orally Inhaled Products. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-6296-5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Noriko, Inaba, dir. Edo Uddo : Shijō saitei no eiga kantoku. Tōkyō : Hayakawa Shobō, 1995.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

My edem v Bolshevo : Puteshestvie v minuvshee. Moskva : Khudozhestvennai︠a︡ literatura, 2013.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

SEIPI, dir. Catálogo de productos y materias primas de la planta industrial del Edo. de México, 1991-92. [Toluca?] : Gobierno del Estado de México, Secretaría de Desarrollo Económico, Dirección General de Industria, Minas y Artesanías, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Shiryōkan, Ōita Kenritsu Sentetsu. Toyo no Kuni no monozukuri : Edo jidai no toku sanhin : kaikan 10-shūnen kinen : 2004-nen shūki kikakuten zuroku. Ōita-shi : Ōita Kenritsu Sentetsu Shiryōkan, 2004.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

inc, King Research, et United States. Dept. of Energy. Technical Information Center., dir. A Study of the value of information and the effect on value of intermediary organizations, timeliness of services & products, and comprehensiveness of the EDB. [Ottawa] : Canada Institute of Scientific and Technical Information, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Swindali, Tommy. Music Production & DJing for EDM : Everything You Need to Know to Become a World Famous EDM DJ & Music Producer. Independently Published, 2019.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Swindali, Tommy. Music Production & DJing for EDM : Everything You Need to Know to Become a World Famous EDM DJ & Music Producer. Swain, Thomas William, 2019.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "EDM Products"

1

Ugrasen, G., D. Rakesh, H. V. Ravindra, K. Guruprasad et Sivanaga Malleswara Rao Singu. « Prediction of Machining Responses in Wire EDM on Stainless Steel-316 ». Dans Advances in Simulation, Product Design and Development, 417–25. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_33.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Georgescu, E., P. Puhl-Quinn, H. Vaith, M. Chutter, J. Quinn, G. Paschmann et R. Torbert. « EDI Data Products in the Cluster Active Archive ». Dans Astrophysics and Space Science Proceedings, 83–95. Dordrecht : Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3499-1_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Das, Sanghamitra, et Shrikrishna N. Joshi. « Thermal Modeling and Simulation of Crater Generation on Wire Electrode During Wire EDM Operation ». Dans Advances in Simulation, Product Design and Development, 121–35. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mali, H. S., Vivek Baghela et Siddhartha Kr Singh. « Design, Fabrication and Simulation of Micro-EDM Machined AISI 316 SS Micro-channel Heat Sink ». Dans Advances in Simulation, Product Design and Development, 385–94. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_30.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Mali, Harlal S., Naresh Kaushik, Siddhartha K. Singh et Anoj Meena. « Design, Analyze, Fabrication and Use of a Customized 3D-Printed µ-EDM Oil Filter Wrench ». Dans Advances in Simulation, Product Design and Development, 331–41. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4556-4_27.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Tougas, Terrence P., et Jolyon P. Mitchell. « Theoretical Basis for the EDA Concept ». Dans Good Cascade Impactor Practices, AIM and EDA for Orally Inhaled Products, 151–71. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-6296-5_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Hussain, Md Zakir, Sabah Khan et Pranjal Sarmah. « Evaluation of EDM Die-Sinking Electrode Wear Rate of COOH-MWCNT/Al Nanocomposite ». Dans Applications of Computational Methods in Manufacturing and Product Design, 21–29. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-0296-3_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Naik, Subhashree, Soumyashree Sabat, Sudhansu Ranjan Das, Debabrata Dhupal et Bijoy Kumar Nanda. « Experimental Investigation, Parametric Optimization, and Cost Analysis in EDM of Aluminium-Silicon Carbide Metal Matrix Composite ». Dans Advanced Manufacturing Systems and Innovative Product Design, 175–87. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9853-1_15.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Krause, Frank-Lothar, Helmut Jansen et Thomas Kiesewetter. « Cooperative Product Development with heterogeneous CAD systems via EDM and Broadband Communication Technique ». Dans CAD Systems Development, 55–70. Berlin, Heidelberg : Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60718-9_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Tougas, Terrence P., et Jolyon P. Mitchell. « Future Directions for the AIM and EDA Concepts ». Dans Good Cascade Impactor Practices, AIM and EDA for Orally Inhaled Products, 401–10. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-6296-5_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "EDM Products"

1

Zhang, Bin, Bob Tarantino et Samuel C. Lieber. « Effect of Metal Additive Manufacturing on the Engineering Design of Manufacturing Tooling : A Case Study on Dies for Plastic Extruded Products ». Dans ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71534.

Texte intégral
Résumé :
Metal Additive Manufacturing (MAM) has had a tremendous impact in reimagining the design and manufacture of products in a number of industries. The use of MAM to directly produce products continues to be investigated; however, the area of manufacturing tooling has yet to be fully explored. MAM provides a unique opportunity to introduce features that make manufacturing tooling better equipped to efficiently produce complex products. A recent example includes MAM produced molds for the injection molding industry. MAM, in this case, provides the ability to introduce unique features, such as cooling channels, that could not be introduced practically with SM processes. This study explores the use of MAM towards the engineering and design of Extrusion Die Tooling for plastic extruded products. Plastic extrusion is a high-volume manufacturing process for a broad range of products from tubing to window frames. These extruded plastic products come in not only a range of sizes, but also different polymer materials. A series of extrusion dies are currently needed in the process in order to achieve the final shape of the product. These dies are effectively designed in two dimensional Computer Aided Design (CAD) packages, because of the current preferred method of fabrication, wire Electrical Discharge Machining (EDM). This study explores the effect of MAM on the extrusion die engineering design process. The explored cases center on common extruded plastic products including tubing and constant wall U-channels. The study first describes how sets of extrusion dies are currently designed in CAD in order to produce the desired extruded product features with established advanced manufacturing processes (EDM). The study then details the effect of using the MAM alternative on the design process, CAD methods selected, and the extrusion die features. The impact of MAM on the extruded die design process are discussed in order to provide guidelines for when it should be considered in order to effectively achieve features on the described extruded plastic products.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Khmelev, Vladimir N., Dmitry V. Genne, Denis S. Abramenko, Roman V. Barsukov, Evgeny V. Ilchenko et Alexey D. Abramov. « The packaging machine for batched packing of pasty products ». Dans 2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2016. http://dx.doi.org/10.1109/edm.2016.7538736.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Tilzo, Vadim V., et Gennady V. Leonov. « Research of the mold elements influence on microwave heating products uniformity ». Dans 2014 15th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2014. http://dx.doi.org/10.1109/edm.2014.6882492.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Khmelev, Vladimir N., Viktor A. Nesterov, Alexey N. Slivin et Andrey V. Shalunov. « Development of the Device for Ultrasonic Cleaning of Small-Sized Products ». Dans 2019 20th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2019. http://dx.doi.org/10.1109/edm.2019.8823404.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Khmelev, Vladimir N., Viktor A. Nesterov, Alexey N. Slivin et Andrey V. Shalunov. « Development of the Ultrasonic Tool for Welding of Thin-Walled Products ». Dans 2019 20th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2019. http://dx.doi.org/10.1109/edm.2019.8823540.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Khmelev, Vladimir N., Anton N. Galakhov, Andrey V. Shalunov et Maxim V. Khmelev. « Compact ultrasonic drier for low temperature dehydration of products in food industry ». Dans 2011 12th International Conference and Seminar of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM 2011). IEEE, 2011. http://dx.doi.org/10.1109/edm.2011.6006957.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Lee, Alexander, James Brink, David Anderson et Karthik Ramani. « WirePATH Rapid Tooling Process and Supporting Software Development ». Dans ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/dac-48723.

Texte intégral
Résumé :
Recent developments in Computer Aided Design (CAD) have drastically reduced overall design cycle time and cost. In this paper, wirePATH, a new method for rapid direct tooling, is presented. By using specialized interactive segmentation computer software and wire electrical discharge machining (wire EDM), wirePATH can reduce manufacturing time and cost for injection molds, casting patterns, and dies. Compared to other conventional-mold making methods, wirePATH can reduce fabrication time by as much as 40 to 70%. Wirepath can use a combination of wire EDM and other processes. Our method provides a new means to produce a greater variety in products by changing only portions of the tooling. Segments allow a part of a mold to be replaced to accommodate design changes and repair. WirePATH enables new applications of wire EDM to more complex shapes by bridging the gaps between CAD, our method, wire EDM and conventional manufacturing processes.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Savruk, Elena V., et Seraphim V. Smirnov. « Nanotexturing of ceramic products surface by means of low-energy electron and laser exposure ». Dans 2011 12th International Conference and Seminar of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM 2011). IEEE, 2011. http://dx.doi.org/10.1109/edm.2011.6006904.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Khmelev, Vladimir N., Andrey V. Shalunov, Roman N. Golykh, Roman S. Dorovskikh, Victor A. Nesterov et Nadezhda A. Shavyrkina. « Studies of spray drying process of sour milk products with the application of ultrasonic vibrations ». Dans 2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2016. http://dx.doi.org/10.1109/edm.2016.7538734.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Majerus, J. N., R. P. Smith et S. M. Yao. « Component-Commonality via Hierarchical Orthogonal Arrays and Refining : Economic Decision Matrices ». Dans ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8574.

Texte intégral
Résumé :
Abstract Component-Commonality implies products using many common parts, desensitized to the range of product applications (defined as noise in this approach), and meeting the functionality objectives of each product. This paper presents a methodology for developing common components and applies it to a sample problem Basically, the methodology involves nine sequential steps. These steps utilize the major concepts of analytical modeling, economic decision matrices (EDM), quality Loss-functions (QLS) for variates and weighted utilities, stochastic models, finite element (FE) simulations for concurrent engineering, and statistical experiments for considering the uncertainty in either application, statistics or managerial decisions. In this paper, the statistical experiments utilize Taguchi’s orthogonal arrays (TOA). The details of these steps are illustrated by application to a problem involving a slider-link subjected to a wide range of noise (inertia/pressure loadings). Six candidate-designs of steel, aluminum and titanium, are generated using an analytical model and a sensitivity study with sequential TOA. These designs are ranked using cost and weight and factor-of-safety with respect to yielding, A Refining EDM with a three part robustness criteria (RC) selected two candidates (best was steel, followed by aluminum) considering Inner noise in the managerial decisions. Verification of the Refining EDM model via a Detailing EDM with a stochastic model and FE simulations is presented in a companion paper.
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "EDM Products"

1

Ullrich, P. Validation of LOCA2 and STAR-ESDM Statistically Downscaled Products. Office of Scientific and Technical Information (OSTI), octobre 2023. http://dx.doi.org/10.2172/2202926.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Oliveira, Denison, Elvis Gouveia et Fernando Diaz. HBK 2245 Product Noise e 2245 Open API. Revista Acústica e Vibrações, décembre 2021. http://dx.doi.org/10.55753/aev.v36e53.138.

Texte intégral
Résumé :
A exigência dos consumidores por produtos silenciosos está aumentando. Para garantir essas exigências de qualidade, os fabricantes precisam aprimorar seus procedimentos de avaliação de produtos, seja no desenvolvimento ou na linha de produção. Tendo isso em vista, a HBK lançou uma nova aplicação para o Sonômetro B&K 2245 chamada Product Noise Partner que torna a medição de potência sonora muito mais fácil. O B&K 2245 também é capaz de auxiliar no processo de controle de qualidade, integrando-se ao sistema de controle/gestão da produção por meio de sua interface de programação API.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Wiemann, Michael C., et Edgard O. Espinoza. Species verification of Dalbergia nigra and Dalbergia spruceana samples in the wood collection of the Forest Products Laboratory. Madison, WI : U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 2017. http://dx.doi.org/10.2737/fpl-rp-690.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mitchell, Brian G., Amir Neori, Charles Yarish, D. Allen Davis, Tzachi Samocha et Lior Guttman. The use of aquaculture effluents in spray culture for the production of high protein macroalgae for shrimp aqua-feeds. United States Department of Agriculture, janvier 2013. http://dx.doi.org/10.32747/2013.7597934.bard.

Texte intégral
Résumé :
The FAO has projected a doubling in world demand for seafood during the 21 ed from aquaculture of marine fish and shrimps fed primarily on fishmeal-based aquafeeds. However, current practices of high intensity monoculture of shrimp in coastal ponds and fish in offshore pens have been strongly criticized as being ecologically and socially unsustainable. This view derives from un- checked eutrophication of coastal marine ecosystems from fish farm effluents, and the destruction of coastal estuarine ecosystems by shrimp farm constructions, plus aquaculture’s reliance on wild-caught small fish - which are excellent food for humans, but instead are rendered into fishmeal and fish oil for formulating aquafeeds. Fishmeal-sparing and waste- reduction aquafeeds can only delay the time when fed aquaculture product are priced out of affordability for most consumers. Additionally, replacement of fishmeal protein and fish oil by terrestrial plant sources such as soybean meal and oil directly raises food costs for human communities in developing nations. New formulations incorporating sustainably-produced marine algal proteins and oils are growing in acceptance as viable and practical alternatives. This BARD collaborative research project investigated a sustainable water-sparing spray/drip culture method for producing high-protein marine macrophyte meals for incorporation into marine shrimp and fish diets. The spray culture work was conducted at laboratory-scale in the USA (UCSD-SIO) using selected Gracilariaand Ulvastrains isolated and supplied by UCONN, and outdoors at pilot-scale in Israel (IOLR-NCM) using local strains of Ulvasp., and nitrogen/phosphorus-enriched fish farm effluent to fertilize the spray cultures and produce seaweed biomass and meals containing up to 27% raw protein (dry weight content). Auburn University (USA) in consultation with TAMUS (USA) used the IOLR meals to formulate diets and conduct marine shrimp feeding trials, which resulted in mixed outcomes, indicating further work was needed to chemically identify and remove anti-nutritional elements present in the IOLR-produced seaweed meals.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Oliveira, Glauco. Cadernos do Cade- Varejo de Gasolina - 2014. Departamento de Estudos Econômicos - Cade, septembre 2014. http://dx.doi.org/10.52896/dee.cc1.014.

Texte intégral
Résumé :
A primeira edição dos Cadernos do Cade trata do setor de “varejo de combustíveis automotivos”, com foco no produto gasolina, descrevendo a cadeia produtiva, aspectos regulatórios e as decisões do Cade em atos de concentração e denúncias de cartel.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Mesick, Hillary C., John L. Breckenridge et Susan V. Carter. Digital Mapping, Charting, and Geodesy Analysis Program (DMAP). Technical Review of Additional Military Layers Product Specifications, Ed. 4.0. Fort Belvoir, VA : Defense Technical Information Center, juin 2002. http://dx.doi.org/10.21236/ada403073.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

da Silva, Anderson, et Ítalo Souza. Mapa interativo da capacidade de suporte de carga de solos da Bacia Hidrográfica do Rio Preto - BA. Instituto Federal Goiano, octobre 2020. http://dx.doi.org/10.33837/cr.map.0120.

Texte intégral
Résumé :
Este produto foi construído sob a ótica de conservação dos solos do Cerrado, em especial no que tange a manutenção de sua qualidade estrutural de acordo com o tipo de uso e cobertura. A origem da produção é a dissertação de mestrado defendida em 2020 no PPG-CRENAC intitulada “Sensoriamento remoto temporal da capacidade de suporte de carga de solos sob diferentes tipos de uso, cobertura e declividade na Bacia do Rio Preto, Oeste Baiano”. Com este mapa interativo é possível obter, com precisão razoável, estimativas da capacidade de suporte de carga dos solos da Bacia sem a necessidade de incursões a campo, em áreas de uso agrícola ou vegetação nativa.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Vélez Álvarez, Luis Guillermo. Evolución de las empresas de agua y saneamiento de Medellín y Cali en Colombia : ¿Vidas paralelas ? Inter-American Development Bank, juillet 2013. http://dx.doi.org/10.18235/0010042.

Texte intégral
Résumé :
En Colombia las Empresas Municipales de Cali - EMCALI - y las Empresas Públicas de Medellín - EPM - a finales de los 80 tuvieron un desempeño financiero, operacional y administrativo comparable con las mejores empresas del sector privado colombiano y al de las más destacadas en el sector de servicios públicos de América Latina. No obstante, actualmente, EPM es la cabeza del mayor grupo empresarial de servicios públicos domiciliaros en Colombia, tiene presencia en varios países de América Latina y produce cuantiosas utilidades mientras que EMCALI está confinada al mercado de su ciudad, lleva más de doce años de haber sido intervenida por la Superintendencia de Servicios Públicos Domiciliarios y aún no ha terminado de honrar el acuerdo de acreedores que la salvó de la quiebra. En el presente artículo se realiza un análisis comparativo en el ámbito de la economía política de las decisiones económicas para el período 1990 - 2010, donde se expone lo ocurrido en el orden institucional y la forma en que ello afectó la evolución de cada una de las empresas. Se observa que ante los choques institucionales de principios de los 90 que alteraron las relaciones de los actores determinantes de su gobernabilidad de largo plazo, en EPM el equilibrio de fuerzas se restableció de forma más o menos rápida y casi sin afectar su desempeño de largo plazo. Por su parte, EMCALI se vio profundamente alterada por una ruptura en el equilibrio de fuerza de los actores con injerencia en la orientación de su actividad.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Costa, Francisco de Assis, Bruna Stein Ciasca, Ellen Claudine Cardoso Castro, Rogger Mathaus Magalhães Barreiros, Ricardo Folhes, Leonardo Lima Bergamini, Aluízio Solyno Sobrino et al. Economia da sociobiodiversidade no estado do Pará. Inter-American Development Bank, octobre 2021. http://dx.doi.org/10.18235/0003713.

Texte intégral
Résumé :
O estudo analisa o valor economico e a importância da biodiversidade para a região amazônica, em particular para a economia do estado do Pará e apresenta recomendações para a implementação de políticas públicas voltadas ao desenvolvimento de uma bioeconomia baseada na preservação da floresta nativa e a biodiversidade da região. Os resultados do estudo demonstram que o apoio aos produtos da biodiversidade alinhados à conservação da floresta amazonica beneficia o desenvolvimento socioeconômico dos estados amazônicos e representa uma oportunidade única para um modelo de desenvolvimento sustentável para a floresta amazônica que concilie conservação ambiental e geração de renda para as populações locais.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Cao Romero, Julio A., Jorge Reyes-Avendaño, Julio Soriano, Leonardo Farfan-Cabrera et Ali Erdemir. A Pin-on-Disc Study on the Electrified Sliding Wear of EVs Powertrain Gears. SAE International, mars 2022. http://dx.doi.org/10.4271/2022-01-0320.

Texte intégral
Résumé :
In contrast to conventional powertrains from internal combustion engine vehicles (ICEV), the tribological performance of powertrains of electric vehicles (EVs) must be further evaluated by considering new critical operating conditions such as electrical environments. The operation of any type of electric motor produces shaft voltages and currents due to various hardware configurations and factors. Furthermore, the common application of inverters intensifies this problem. It has been reported that the induced shaft voltages and currents can cause premature failure problems in tribological components such as bearings and gears due to accelerated wear and/or fatigue. It is ascribed to effects of electric discharge machining (EDM), also named, sparking wear caused by shaft currents and poor or increasingly diminishing dielectric strength of lubricants. A great effort has been done to study this problem in bearings, but it has not yet been the case for gears. Considering that EVs powertrains can be configurated with an electric motor coupled to a single-speed or multi-speed transmission, it is expected that shaft currents can also affect gears to some extent. The pin-on-disc test has been widely used to study sliding wear of gear materials under comparable or realistic operating conditions. This accelerated test is effective for screening materials, lubricants and operating conditions allowing evaluations of their friction and wear properties. However, it has not been implemented for studying gear materials under electrified environments. Thus, this paper aims to explore the friction coefficient and wear of gear materials under non-electrified and electrified sliding in a pin-on-disc tester applying typical of EVs powertrain shaft currents during sliding. The tests were carried out at two different DC currents under comparable gear dry and lubricated sliding contact conditions. Friction coefficient, wear volumes and morphologies were evaluated and reported in this work.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « EDM Products » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie