Littérature scientifique sur le sujet « Edge-preserving filter »

This article presents a study on edge preserving filters in image matching which comprises a development of stereo matching algorithm using two edge preserving filters. Fundamentally, the framework is reconstructed by several sequential processes. The output of these processes is a disparity map or depth map. The corresponding points between two images require accurate matching to make accurate depth map estimation. Thus, the propose work in this article utilizes sum of squared differences (SSD) with dual edge preserving filters. These filters are used due to edge preserved properties and to increase the accuracy. The median filter (MF) and bilateral filter (BF) will be utilized. The SSD produces preliminary results with low noise and the edge preserving filters reduce noise on the low texture regions with edge preserving properties. Based on the experimental analysis using the standard benchmarking evaluation system from the Middlebury, the disparity map produced is 6.65% for all error pixels. It shows an accurate edge preserved properties on the disparity maps. To make the proposed work more reliable with current available methods, the quantitative measurement has been made to compare with other existing methods and it displays the proposed work in this article perform much better.

Edge preserving filters aim to simplify the representation of images (e.g., by reducing noise or eliminating irrelevant detail) while preserving their most significant edges. These filters are typically nonlinear and locally smooth the image structure while minimizing both blurring and over-sharpening of visually important edges. Here we present the Alternating Guided Filter (AGF) that achieves edge preserving smoothing by combining two recently introduced filters: the Rolling Guided Filter (RGF) and the Smooth and iteratively Restore Filter (SiR). We show that the integration of RGF and SiR in an alternating iterative framework results in a new smoothing operator that preserves significant image edges while effectively eliminating small scale details. The AGF combines the large scale edge and local intensity preserving properties of the RGF with the edge restoring properties of the SiR while eliminating the drawbacks of both previous methods (i.e., edge curvature smoothing by RGF and local intensity reduction and restoration of small scale details near large scale edges by SiR). The AGF is simple to implement and efficient, and produces high-quality results. We demonstrate the effectiveness of AGF on a variety of images, and provide a public code to facilitate future studies.

Denoising is one of the important aspects in image processing applications. Denoising is the process of eliminating the noise from the noisy image. In most cases, noise accumulates at the edges. So that prevention of noise at edges is one of the most prominent problem. There are numerous edge preserving approaches available to reduce the noise at edges in that Gaussian filter, bilateral filter and non-local means filtering are the popular approaches but in these approaches denoised image suffer from blurring. To overcome these problems, in this article a Gaussian/bilateral filtering (G/BF) with a wavelet thresholding approach is proposed for better image denoising. The performance of the proposed work is compared with some edge-preserving filter algorithms such as a bilateral filter and the Non-Local Means Filter, in terms that objectively assess quality. From the simulation results, it is found that the performance of proposed method is superior to the bilateral filter and the Non-Local Means Filter.

In this study, an edge-preserving nonlinear filter is proposed to reduce multiplicative noise by using a filter structure based on mathematical morphology. This method is called the minimum index of dispersion (MID) filter. MID is an improved and extended version of MCV (minimum coefficient of variation) and MLV (mean least variance) filters. Different from these filters, this paper proposes an extra-layer for the value-and-criterion function in which orientation information is employed in addition to the intensity information. Furthermore, the selection function is re-modeled by performing low-pass filtering (mean filtering) to reduce multiplicative noise. MID outputs are benchmarked with the outputs of MCV and MLV filters in terms of structural similarity index (SSIM), peak signal-to-noise ratio (PSNR), mean squared error (MSE), standard deviation, and contrast value metrics. Additionally, F Score, which is a hybrid metric that is the combination of all five of those metrics, is presented in order to evaluate all the filters. Experimental results and extensive benchmarking studies show that the proposed method achieves promising results better than conventional MCV and MLV filters in terms of robustness in both edge preservation and noise removal. Noise filter methods normally cannot give better results in noise removal and edge-preserving at the same time. However, this study proves a great contribution that MID filter produces better results in both noise cleaning and edge preservation.

A nonlinear filter for smoothing color and gray imagescorrupted by Gaussian noise is presented in this paper. The proposedfilter designed to reduce the noise in the R,G, and B bands of thecolor images and preserving the edges. This filter applied in order toprepare images for further processing such as edge detection andimage segmentation.The results of computer simulations show that the proposedfilter gave satisfactory results when compared with the results ofconventional filters such as Gaussian low pass filter and median filterby using Cross Correlation Coefficient (ccc) criteria.

Preserving the edges and information is one of the main purposes of edge-preserving filters. That is, they’re employed to smooth a picture, and minimize halos, phantoms, and edge blur over the edge. They have a nonlinear relationship between one thing and another. Bilateral filters, anisotropic diffusion filters, directed filters, and trilateral filters are all types of example filters. The filter family may be used in a wide range of image processing tasks, such as denoising, video abstraction, demosaicing, optical flow estimation, stereo matching, tone mapping, style transfer, relighting, and others. The paper gives a clear description of edge-preserving filters, from the heat diffusion equation in ancient times to the present, explaining their numerous applications and detailing their numerous uses. Additionally, mathematical analysis is included, as well as efficient and optimized implementations. The focus is on preserving the boundaries, spikes, and canyons, and the information is given clearly and in detail. Finally, it offers a realistic representation of efficient implementation, as well as a comprehensive research scope for future hardware implementation.

Full-waveform inversion (FWI) can provide accurate estimates of subsurface model parameters. In spite of its success, the application of FWI in areas with high-velocity contrast remains a challenging problem. Quadratic regularization methods are often adopted to stabilize inverse problems. Unfortunately, edges and sharp discontinuities are not adequately preserved by quadratic regularization techniques. Throughout the iterative FWI method, an edge-preserving filter, however, can gently incorporate sharpness into velocity models. For every point in the velocity model, edge-preserving smoothing assigns the average value of the most uniform window neighboring the point. Edge-preserving smoothing generates piecewise-homogeneous images with enhanced contrast at boundaries. We adopt a simultaneous-source frequency-domain FWI, based on quasi-Newton optimization, in conjunction with an edge-preserving smoothing filter to retrieve high-contrast velocity models. The edge-preserving smoothing filter gradually removes the artifacts created by simultaneous-source encoding. We also have developed a simple model update to prevent disrupting the convergence of the optimization algorithm. Finally, we perform tests to examine our algorithm.

2007/2008
The intensity of natural light can span over 10 orders of magnitude from starlight to direct sunlight. Even in a single scene, the luminance of the bright areas can be thousands or millions of times greater than the luminance in the dark areas; the ratio between the maximum and the minimum luminance values is commonly known as dynamic range or contrast. The human visual system is able to operate in an extremely wide range of luminance conditions without saturation and at the same time it can perceive fine details which involve small luminance differences. Our eyes achieve this ability by modulating their response as a function of the local mean luminance with a process known as local adaptation. In particular, the visual sensation is not linked to the absolute luminance, but rather to its spatial and temporal variation. One consequence of the local adaptation capability of the eye is that the objects in a scene maintain their appearance even if the light source illuminating the scene changes significantly. On the other hand, the technologies used for the acquisition and reproduction of digital images are able to handle correctly a significantly smaller luminance range of 2 to 3 orders of magnitude at most. Therefore, a high dynamic range (HDR) image poses several challenges and requires the use of appropriate techniques. These elementary observations define the context in which the entire research work described in this Thesis has been performed. As indicated below, different fields have been considered; they range from the acquisition of HDR images to their display, from visual quality evaluation to medical applications, and include some developments on a recently proposed class of display equipment. An HDR image can be captured by taking multiple photographs with different exposure times or by using high dynamic range sensors; moreover, synthetic HDR images can be generated with computer graphics by means of physically-based algorithms which often involve advanced lighting simulations. An HDR image, although acquired correctly, can not be displayed on a conventional monitor. The white level of most devices is limited to a few hundred cd/m² by technological constraints, primarily linked to the power consumption and heat dissipation; the black level also has a non negligible luminance, in particular for devices based on the liquid crystal technology. However, thanks to the aforementioned properties of the human visual system, an exact reproduction of the luminance in the original scene is not strictly necessary in order to produce a similar sensation in the observer. For this purpose, dynamic range reduction algorithms have been developed which attenuate the large luminance variations in an image while preserving as far as possible the fine details. The most simple dynamic range reduction algorithms map each pixel individually with the same nonlinear function commonly known as tone mapping curve. One operator we propose, based on a modified logarithmic function, has a low computational cost and contains one single user-adjustable parameter. However, the methods belonging to this category can reduce the visibility of the details in some portions of the image. More advanced methods also take into account the pixel neighborhood. This approach can achieve a better preservation of the details, but the loss of one-to-one mapping from input luminances to display values can lead to the formation of gradient reversal effects, which typically appear as halos around the object boundaries. Different solutions to this problem have been attempted. One method we introduce is able to avoid the formation of halos and intrinsically prevents any clipping of the output display values. The method is formulated as a constrained optimization problem, which is solved efficiently by means of appropriate numerical methods. In specific applications, such as the medical one, the use of dynamic range reduction algorithms is discouraged because any artifacts introduced by the processing can lead to an incorrect diagnosis. In particular, a one-to-one mapping from the physical data (for instance, a tissue density in radiographic techniques) to the display value is often an essential requirement. For this purpose, high dynamic range displays, capable of reproducing images with a wide luminance range and possibly a higher bit depth, are under active development. Dual layer LCD displays, for instance, use two liquid crystal panels stacked one on top of the other over an enhanced backlight unit in order to achieve a dynamic range of 4 ÷ 5 orders of magnitude. The grayscale reproduction accuracy is also increased, although a “bit depth” can not be defined unambiguously because the luminance levels obtained by the combination of the two panels are partially overlapped and unevenly spaced. A dual layer LCD display, however, requires the use of complex splitting algorithms in order to generate the two images which drive the two liquid crystal panels. A splitting algorithm should compensate multiple sources of error, including the parallax introduced by the viewing angle, the gray-level clipping introduced by the limited dynamic range of the panels, the visibility of the reconstruction error, and glare effects introduced by an unwanted light scattering between the two panels. For these reasons, complex constrained optimization techniques are necessary. We propose an objective function which incorporates all the desired constraints and requirements and can be minimized efficiently by means of appropriate techniques based on multigrid methods. The quality assessment of high dynamic range images requires the development of appropriate techniques. By their own nature, dynamic range reduction algorithms change the luminance values of an image significantly and make most image fidelity metrics inapplicable. Some particular aspects of the methods can be quantified by means of appropriate operators; for instance, we introduce an expression which describes the detail attenuation introduced by a tone mapping curve. In general, a subjective quality assessment is preferably performed by means of appropriate psychophysical experiments. We conducted a set of experiments, targeted specifically at measuring the level of agreement between different users when adjusting the parameter of the modified logarithmic mapping method we propose. The experimental results show a strong correlation between the user-adjusted parameter and the image statistics, and suggest a simple technique for the automatic adjustment of this parameter. On the other hand, the quality assessment in the medical field is preferably performed by means of objective methods. In particular, task-based quality measures evaluate by means of appropriate observer studies the clinical validity of the image used to perform a specific diagnostic task. We conducted a set of observer studies following this approach, targeted specifically at measuring the clinical benefit introduced by a high dynamic range display based on the dual layer LCD technology over a conventional display with a low dynamic range and 8-bit quantization. Observer studies are often time consuming and difficult to organize; in order to increase the number of tests, the human observers can be partially replaced by appropriate software applications, known as model observers or computational observers, which simulate the diagnostic task by means of statistical classification techniques. This thesis is structured as follows. Chapter 1 contains a brief background of concepts related to the physiology of human vision and to the electronic reproduction of images. The description we make is by no means complete and is only intended to introduce some concepts which will be extensively used in the following. Chapter 2 describes the technique of high dynamic range image acquisition by means of multiple exposures. In Chapter 3 we introduce the dynamic range reduction algorithms, providing an overview of the state of the art and proposing some improvements and novel techniques. In Chapter 4 we address the topic of quality assessment in dynamic range reduction algorithms; in particular, we introduce an operator which describes the detail attenuation introduced by tone mapping curves and describe a set of psychophysical experiments we conducted for the adjustment of the parameter in the modified logarithmic mapping method we propose. In Chapter 5 we move to the topic of medical images and describe the techniques used to map the density data of radiographic images to display luminances. We point out some limitations of the current technical recommendation and propose an improvement. In Chapter 6 we describe in detail the dual layer LCD prototype and propose different splitting algorithms for the generation of the two images which drive the two liquid crystal panels. In Chapter 7 we propose one possible technique for the estimation of the equivalent bit depth of a dual layer LCD display, based on a statistical analysis of the quantization noise. Finally, in Chapter 8 we address the topic of objective quality assessment in medical images and describe a set of observer studies we conducted in order to quantify the clinical benefit introduced by a high dynamic range display. No general conclusions are offered; the breadth of the subjects has suggested to draw more focused comments at the end of the individual chapters.
XXI Ciclo
1982

碩士
國立交通大學
土木工程系
90
For mapping or object identification, the edges possess important information. It would be desirable to preserve the edges in the original image, while applying smoothing filter to reduce the influence of noise. A number of filters are available for this purpose, including the Minimum Coefficient of Variation (MCV) Filter, Kuwahara Filter, Nagao Filter, SNNF (Symmetric Nearest Neighbor Filter). This study investigates the evaluation scheme for the performance of these filters. Traditional numerical indices, similarity/distance measures, subjective criteria method and the recently developed Smoothing/Sharpening measures are applied for comparison. From the experiments with simulated noises, it is found that the Smoothing/Sharpening measures do provide intrinsic information. However, the meaning of the quality still remains for discussion.

碩士
國立清華大學
資訊工程學系
96
Additive noise removal is an important and practical problem in image processing. Bayesian and other approaches have been proposed to restore the corrupted images. More methods are proposed to preserve signal details while removing noise such as the bilateral filtering. This filter is a weighted average of the local spatial and range distance over a set of data. However, users have to find acceptable two parameters σS and σR in bilateral filters manually by their experience. In this paper, we propose an algorithm which can generate two parameters automatically by estimating standard deviation in noisy images. We also apply this algorithm on images with large additive Gaussian noise. Experimental results compared by PSNR show that our algorithm is better than using manual parameters. We also show that the effect of the domain transform, color noise and window size on the noise removal. We develop a software and hardware based system for this adaptive bilateral filtering. The adaptive parameter estimation algorithm is done in the software and the bilateral filtering is in the hardware. Based on UMC 90 nm process, we design and implement the first real-time bilateral filter that can process 180 frames of size 720x480 per second.

碩士
國立中山大學
機械與機電工程學系研究所
92
In most of the optical interferometry techniques, one often get interferometric fringe patterns which include noises, and these noises will cause analysis difficulty. The method of median filter is used to sort the data in the region, and use median value to replace the center value of the region. Therefore, the median filter technique can find central tendency of the region, and less affected by the presence of a minority of aberrant value. So the median filter technique is used frequently in image processing of many optical fringe patterns The median filter technique is effective in removing noise with high frequency, but tends to smooth out details such as summits if the window size is large. So there are many improved methods developed corresponding to different properties of signal. Even though each of the improved methods has different considerations, such as to consider different integer weights, or different window size etc., their purposes are all the same, that is to make results more accurately. On the basis of these viewpoints, this thesis will use concept of least–squares fitting on 2-D interferometric fringe patterns. By finding the trend of the region, and avoid unnecessary signal consideration, make the results more accurately. In order to study the effect of the proposed technique, two sets of fringe patterns obtained from the phase-shifting speckle interferometry will be used as examples. They showed that the proposed technique presents a better result than traditional technique.

博士
臺灣大學
資訊工程學研究所
98
Recently, color image processing is extensively becoming a very important research area since color images provide more fruitful information. Among the color image processing research issues, the edge-preserving for color contrast enhancement issue, the color demosaicing issue, and the mosaic image resizing issue are three popular research issues. Thus, this thesis presents an efficient edge-preserving algorithm for color contrast enhancement with application to color image segmentation, a demosaicing algorithm for color filter array using gradient edge detection masks and adaptive heterogeneity-projection, and a joint demosaicing and arbitrary-ratio resizing algorithm for mosaic images. In the edge-preserving for color contrast enhancement issue, a new and efficient edge-preserving algorithm is presented for color contrast enhancement in CIE Lu''v'' color space. The proposed algorithm not only can enhance the color contrast as the previous algorithm does, but also has an edge-preservation effect. In addition, the spurious edge points occurred due to the color contrast enhancement can be well reduced using the proposed algorithm. This is the first edge-preserving algorithm for color contrast enhancement in color space. Furthermore, a novel color image segmentation algorithm is presented to justify the edge-preservation benefit of the proposed color contrast enhancement algorithm. Experimental results demonstrate the advantages of color contrast enhancement, edge-preservation effect, and segmentation result in our proposed algorithm. In the color demosaicing issue, without demosaicing processing, a new approach is first proposed to extract more accurate gradient/edge information on mosaic images directly. Next, based on spectral-spatial correlation, a novel adaptive heterogeneity-projection with proper mask size for each pixel is presented. Combining the extracted gradient/edge information and the adaptive heterogeneity-projection values, a new edge-sensing demosaicing algorithm is presented. Experimental results demonstrated that our proposed high-quality demosaicing algorithm has the best image quality performance when compared with several recently published algorithms. In the mosaic image resizing issue, a joint demosaicing and arbitrary-ratio resizing algorithm for mosaic images is presented. First, the fully populated green color plane is constructed by using the edge-sensing approach and color difference idea. Instead of interpolating the R and B color planes directly, the green-red color difference plane and green-blue color difference plane are therefore interpolated in order to reduce the estimation error. Next, based on the discrete cosine transform technique, the above three constructed planes are resized to the arbitrary sized ones. Finally, the resized red and blue color planes are constructed by using the three resized planes, and then the arbitrary sized full color image is obtained. To the best of our knowledge, this is the first time that such a joint demosaicing and arbitrary-ratio resizing algorithm for mosaic images is presented. Based on twenty-four popular testing mosaic images, the proposed resizing algorithm has better image quality performance when compared with three native algorithms which are the combinations of three well-know demosaicing methods and one existing resizing method.

Ho Chung Wa.
Thesis (M.Phil.)--Chinese University of Hong Kong, 2004.
Includes bibliographical references.
Abstracts in English and Chinese.
Introduction --- p.6
Paper I --- p.13
Paper II --- p.34
Concluding Remark --- p.51