Littérature scientifique sur le sujet « ECCENTRICALLY LOAD »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « ECCENTRICALLY LOAD ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "ECCENTRICALLY LOAD"
Zhao, Bao Cheng, et Qiang Gu. « Energy-Dissipation Mechanisms and Seismic Design Recommendation of Eccentrically Braced Steel Frames ». Applied Mechanics and Materials 71-78 (juillet 2011) : 3662–65. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.3662.
Texte intégralHan, Bing, et Yuan Feng Wang. « Long Term Load-Carrying Capacity of Eccentrically Compressed Concrete Filled Steel Tubular Members ». Key Engineering Materials 302-303 (janvier 2006) : 651–57. http://dx.doi.org/10.4028/www.scientific.net/kem.302-303.651.
Texte intégralWu, Jieqiong, Jian Zhang, Bo Diao, Shaohong Cheng et Yinghua Ye. « Hysteretic Behavior of Eccentrically Loaded Reinforced Air-Entrained Concrete Columns under Combined Effects of Freeze-Thaw Cycles and Seawater Corrosion ». Advances in Civil Engineering 2018 (19 juillet 2018) : 1–10. http://dx.doi.org/10.1155/2018/3931791.
Texte intégralPham, Quang N., Satoru Ohtsuka, Koichi Isobe et Yutaka Fukumoto. « Limit load space of rigid footing under eccentrically inclined load ». Soils and Foundations 60, no 4 (août 2020) : 811–24. http://dx.doi.org/10.1016/j.sandf.2020.05.004.
Texte intégralArda, Mustafa, et Metin Aydogdu. « Buckling of Eccentrically Loaded Carbon Nanotubes ». Solid State Phenomena 267 (octobre 2017) : 151–56. http://dx.doi.org/10.4028/www.scientific.net/ssp.267.151.
Texte intégralMohamed, A. E. « Design Approach for Eccentrically Loaded Reinforced Concrete Sections ». IOP Conference Series : Earth and Environmental Science 1056, no 1 (1 août 2022) : 012017. http://dx.doi.org/10.1088/1755-1315/1056/1/012017.
Texte intégralTamrazyan, Ashot, et Levon Avetisyan. « Estimation of Load Bearing Capacity of Eccentrically Compressed Reinforced Concrete Elements under Dynamic Loading in Fire Conditions ». Applied Mechanics and Materials 638-640 (septembre 2014) : 62–65. http://dx.doi.org/10.4028/www.scientific.net/amm.638-640.62.
Texte intégralHlaváček, M., et D. Vokoun. « The influence of articular surface incongruity on lubrication and contact pressure distribution of loaded synovial joints ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine 212, no 1 (1 janvier 1998) : 11–22. http://dx.doi.org/10.1243/0954411981533782.
Texte intégralNivethitha, A. P., G. Vani et P. Jayabalan. « Numerical Analysis of Eccentrically Loaded Cold-Formed Plain Channel Columns ». Journal of Structures 2014 (24 juin 2014) : 1–10. http://dx.doi.org/10.1155/2014/908415.
Texte intégralŠćepanović, B., M. Knežević et D. Lučić. « Methods for determination of ultimate load of eccentrically patch loaded steel I-girders ». Informes de la Construcción 66, Extra-1 (30 décembre 2014) : m018. http://dx.doi.org/10.3989/ic.13.076.
Texte intégralThèses sur le sujet "ECCENTRICALLY LOAD"
Otten, Zachary David. « Seismic Retrofitting of a Historic Structure with Limited Construction Documentation ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016.
Trouver le texte intégralPrekopová, Pavlína. « Vliv seizmického zatížení na chování železobetonového rámu ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409777.
Texte intégralLo, Clifford Fook Leong. « Behaviour and design of eccentrically loaded bolted connections ». Thesis, McGill University, 1987. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63986.
Texte intégralBehera, Rabi Narayan. « Behaviour of Shallow Strip Foundation on Granular Soil Under Eccentrically Lnclined Load ». Thesis, 2013. http://ethesis.nitrkl.ac.in/4599/1/Ph._D_Thesis_R_N_Behera.pdf.
Texte intégralSethy, Barada Prasad. « Load carrying capacity of eccentrically loaded shallow rectangular foundation on granular soil ». Thesis, 2014. http://ethesis.nitrkl.ac.in/6394/1/E-9.pdf.
Texte intégralRANJAN, BHASKAR. « NUMERICAL ANALYSIS OF CENTRALLY AND ECCENTRICALLY LOADED SQUARE FOOTING ON GEOGRID-REINFORCED SOIL ». Thesis, 2020. http://dspace.dtu.ac.in:8080/jspui/handle/repository/18077.
Texte intégralMahendar, Regoti. « Ultimate Bearing Capacity of Strip Footing on Granular Soil Under Eccentrically Inclined Load- A Numerical Approach ». Thesis, 2015. http://ethesis.nitrkl.ac.in/7182/1/Ultimate_Mahendar_2015.pdf.
Texte intégralChen, Wei-Sheng, et 陳韋升. « Experimental Study of Effect of Sinking and Eccentrical Load on Load-Carrying Capacities of Falsework ». Thesis, 2007. http://ndltd.ncl.edu.tw/handle/09772331666373022747.
Texte intégral國立雲林科技大學
營建工程系碩士班
95
Regardless of the materials for falsework, the significant attention has been paid on the critical load of the falsework at different heights, and some actual situations on the construction sites and some details of accessories are usually ignored. In design, the falsework is always assumed as following. (1) The ground base had been properly tamped, and it is unnecessary to consider its settlement. (2) On the top U-shape regulator is used, and all the loads are directly and non-eccentrically conveyed into the vertical falsework. However, the investigation on the construction sites shows that in the actual construction of the falsework, the above two terms are difficult to be as ideal as that in design. The research results indicates that in the test of long-term settlement, the critical load of the combination system of the simple door-shape scaffold with wooden shores reduced the most, the second is the heavy support frame, and the pure simple door-shape scaffold system reduces the least. In the test of instantaneous settlement, the pure simple door-shape scaffold is similar to the heavy support frame in the reduction proportion of bearing capacity. On construction sites, ground arrangement should be certainly carried out first to avoid the settlement of the ground base. If the construction sites are close to rivers or agricultural irrigation ditches, the strength reduction factor needed to bear the settlement should be taken into consideration when the bearing capacity of the falsework is being calculated. In the tests of non-coaxial vertical loads, when the external force is loaded near the vertical steel tubes on both sides of the scaffold, the pure simple door-shape steel scaffold system is similar to the combination system of the simple door-shape scaffold with wooden shores in the reduction proportion of critical loads. In the test of non-coaxial vertical load with 1/2 and 1/3 configurations, the pure simple door-shape scaffold system is less than the combination system of the simple door-shape scaffold with wooden shores in the reduction proportion of critical loads. In construction sites, if the U-shape regulator is not used on the top scaffold, engineers should make the external loads near the vertical steel tubes on both sides of scaffolds to reduce the losses of the critical loads.
Zhang, Zhe-Lun, et 張哲綸. « Strength Analysis of Welded Connections under Eccentrical Loads ». Thesis, 2016. http://ndltd.ncl.edu.tw/handle/78040051278667487225.
Texte intégral朝陽科技大學
營建工程系
104
The welded joints Mechanical behavior is complex, according to weld groups geometry, strength, eccentrically loaded and other factors as design considerations. This research conducted to study weld groups of steel construction the eccentrically load. Furthermore, apply the six analytical methods compared. Fillet weld analysis, there are two main methods, one is elastic method, it is an easy task to use, based on the eccentric force can be moved the center of gravity of the weld group, is resolved into a force acting though the center of gravity of the weld group and a moment. The other is ultimate design, it is complex calculations to analysis, based on the IC location depends upon the geometry of the weld group and the location and direction of the loading. Theoretically, the force equilibrium equations should be satisfied at the correct IC. Method of analysis had elastic method, instantaneous center of rotation method (IC method), AISC design tables method, Iwankiw’s method, correction Iwankiw’s method and piecewise Iwankiw’s method respectively. The IC method is the most accurate. Calculation process of the Iwankiw’s method, correction Iwankiw’s method and piecewise Iwankiw’s method are more easily than IC method. However, the most commonly used elastic method is the calculation for the most simple and conservative, but the error is the largest. AISC manuals provide the C coefficients for six specific load inclination angles only, which were derived based on the IC method. For a non-tabulated value have the tendency to linearly interpolate the C coefficient for a nonspecific angle value. However, this is not totally justifiable. Compared with other methods, correction Iwankiw’s method and piecewise Iwankiw’s method are closer IC method Based on case, engineers can be selection methods used as a reference design.
Tseng, Yu-Ying, et 曾育英. « Study on the Instantaneous Center of Bolted Connections due to Eccentrically Loads ». Thesis, 2011. http://ndltd.ncl.edu.tw/handle/80455106922907130487.
Texte intégral國立中興大學
土木工程學系所
99
When eccentricity occurs in the plane of the faying surface, the bolt must be designed to resist the combined effect of the direct share and the additional shear from the induced moment. Two analysis methods for bolted connections of eccentrically loaded are the elastic method and the ultimate strength method. The ultimate analysis, which specified in AISC design manuals, has been used for the analysis of eccentrically loaded connections which is bolted. In the current AISC design manual, tabulated solutions for eccentric loads inclined at specified angles from vertical are provided. For the cases which inclined angles are in the range of 75°≦θ≦360°, the current AISC manual does not furnish available tables to apply. This study to evaluate the strength of eccentrically loaded connections, which are not limited to the bolt patterns listed in current AISC manuals, are presented and compared. A numerical procedure for the analysis of eccentric loads that are inclined at any angles from vertical is furnished. This will also accomplish a better solution for practicing engineer in their routine design.
Livres sur le sujet "ECCENTRICALLY LOAD"
W, Pinson Mark, et Langley Research Center, dir. Load-shortening behavior of an initially curved eccentrically loaded column. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1990.
Trouver le texte intégralW, Pinson Mark, et Langley Research Center, dir. Load-shortening behavior of an initially curved eccentrically loaded column. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1990.
Trouver le texte intégralW, Pinson Mark, et Langley Research Center, dir. Load-shortening behavior of an initially curved eccentrically loaded column. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1990.
Trouver le texte intégralW, Pinson Mark, et Langley Research Center, dir. Load-shortening behavior of an initially curved eccentrically loaded column. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1990.
Trouver le texte intégralChapitres de livres sur le sujet "ECCENTRICALLY LOAD"
Blikharskyy, Yaroslav, Oleksandr Panchenko, Yuriy Sobko et Andriy Tereshko. « Calculation of Eccentrically Compressed RC Columns Strengthened by CFRP Under Different Load Level ». Dans Lecture Notes in Civil Engineering, 29–39. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14141-6_3.
Texte intégralHan, Bing, et Yuan Feng Wang. « Long Term Load-Carrying Capacity of Eccentrically Compressed Concrete Filled Steel Tubular Members ». Dans Environmental Ecology and Technology of Concrete, 651–57. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-983-0.651.
Texte intégralPham, N. Quang, et Satoru Ohtsuka. « Numerical Investigation on Bearing Capacity of Rigid Footing on Sandy Soils Under Eccentrically Inclined Load ». Dans Lecture Notes in Civil Engineering, 333–41. Singapore : Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7735-9_37.
Texte intégral« Relationship between global and local indicators of the performance of eccentrically braced frames under seismic loads ». Dans Behaviour of Steel Structures in Seismic Areas, 385–92. CRC Press, 2009. http://dx.doi.org/10.1201/9780203861592-62.
Texte intégralKoboevic, S., J. Rozon et R. Tremblay. « Relationship between global and local indicators of the performance of eccentrically braced frames under seismic loads ». Dans Behaviour of Steel Structures in Seismic Areas. CRC Press, 2009. http://dx.doi.org/10.1201/9780203861592.ch52.
Texte intégralActes de conférences sur le sujet "ECCENTRICALLY LOAD"
Syafirra, Sonnia, Ming Narto Wijaya et Lilya Susanti. « Behavior of eccentrically braced frames on portal structure under cyclic load ». Dans INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING SYSTEMS : ICMEMS2022. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0111512.
Texte intégralSrinivasan, Malur N., et Vanchak Chayakul. « Buckling Behavior of Glass-Fiber Reinforced Polyester Pultruded Columns ». Dans ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62216.
Texte intégralAl-Thairy, Haitham, et Faaiza Al-Naqeeb. « Numerical Investigation on the Behavior of Eccentrically Loaded LWRC Columns at Elevated Temperature ». Dans 4th International Conference on Architectural & Civil Engineering Sciences. Cihan University-Erbil, 2023. http://dx.doi.org/10.24086/icace2022/paper.865.
Texte intégralShenoy, B. Satish, Rammohan S. Pai B., Raghuvir Pai B. et Shrikanth Rao D. « Effect of Turbulence and Offset Loading on the Performance of a Single Pad Externally Adjustable Fluid Film Bearing ». Dans ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-85760.
Texte intégralSpiˆnu, Sergiu, et Emanuel Diaconescu. « Numerical Simulation of Elastic Conforming Contacts Under Eccentric Loading ». Dans STLE/ASME 2008 International Joint Tribology Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/ijtc2008-71275.
Texte intégralAnyfantis, Konstantinos. « Ultimate Compressive Strength of Eccentrically Loaded Stiffened Panels in Ship Structures : A Computational Study ». Dans ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-96708.
Texte intégralCornelius, T. « Recent Developments in Design Methods for Masonry Pillar Structures ». Dans IABSE Symposium, Wroclaw 2020 : Synergy of Culture and Civil Engineering – History and Challenges. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2020. http://dx.doi.org/10.2749/wroclaw.2020.0650.
Texte intégralBerten, Karlien, et Bart De Pauw. « The use of a new slab track system in the renovation of the Vierendeel railway bridges in Mechelen ». Dans IABSE Congress, Ghent 2021 : Structural Engineering for Future Societal Needs. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.0197.
Texte intégralBerten, Karlien, et Bart De Pauw. « The use of a new slab track system in the renovation of the Vierendeel railway bridges in Mechelen ». Dans IABSE Congress, Ghent 2021 : Structural Engineering for Future Societal Needs. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.0197.
Texte intégralZhang, Sumei, Jie Chen, Zhenfeng Huang, Xiongxiong Zhang et Lanhui Guo. « Behavior of innovative T-shaped multi-partition steel-concrete composite columns under concentric and eccentric compressive loadings ». Dans 12th international conference on ‘Advances in Steel-Concrete Composite Structures’ - ASCCS 2018. Valencia : Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/asccs2018.2018.7004.
Texte intégral