Littérature scientifique sur le sujet « DISSIMILAR THICKNESS »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « DISSIMILAR THICKNESS ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "DISSIMILAR THICKNESS"
Hussein, N. I. S., M. N. Ayof et S. Nordin. « Tensile Strength of Orbital Welded Mild Steel Tubes with Dissimilar Thickness ». International Journal of Materials, Mechanics and Manufacturing 4, no 1 (2015) : 56–59. http://dx.doi.org/10.7763/ijmmm.2016.v4.225.
Texte intégralHan, Ke, Yunhu Cao, Hongliang Li, Chengyu Hu, Zeyu Wang, Duo Liu, Jianfeng Wang et Qiang Zhu. « Influence of Butter Layer Thickness on Microstructure and Mechanical Properties of Underwater Wet 16Mn/304L Dissimilar Welded Joint ». Materials 16, no 20 (11 octobre 2023) : 6646. http://dx.doi.org/10.3390/ma16206646.
Texte intégralHaikal, Haikal, et Triyono Triyono. « STUDI LITERATUR PENGARUH PARAMETER PENGELASAN TERHADAP SIFAT FISIK DAN MEKANIK PADA LAS TITIK (RESISTANCE SPOT WELDING) ». ROTASI 15, no 2 (1 avril 2013) : 44. http://dx.doi.org/10.14710/rotasi.15.2.44-54.
Texte intégralAfendi, Mohd, Ku Hafizan, M. S. Abdul Majid, R. Daud, N. A. M. Amin, C. E. Meng et Tokuo Teramoto. « Fracture Characteristics of Shear Adhesive Dissimilar Joint ». Applied Mechanics and Materials 606 (août 2014) : 165–69. http://dx.doi.org/10.4028/www.scientific.net/amm.606.165.
Texte intégralGunasekaran, P., K. T. Thilagham et D. Noorullah. « Studies on Friction Stir Welding of AA2014, AA6082 and AA7075 Simillar and Dissimillar Joints ». Advanced Engineering Forum 37 (septembre 2020) : 15–24. http://dx.doi.org/10.4028/www.scientific.net/aef.37.15.
Texte intégralFuruya, Hiroki S., Sakiko Yabu, Yutaka S. Sato et Hiroyuki Kokawa. « Microstructural Control of the Interface Layer for Strength Enhancement of Dissimilar Al/Cu Joints via Ni Addition during TIG Arc Brazing ». Metals 11, no 3 (16 mars 2021) : 491. http://dx.doi.org/10.3390/met11030491.
Texte intégralIzzawati, Basirom, Mohd Afendi, M. Afif, S. Nurhashima, R. Daud, N. A. M. Amin et M. S. Abdul Majid. « 3D Finite Element Stress Analysis of Butt Adhesively Bonded Dissimilar Joint : Effect of Bond Thickness on Strength ». Applied Mechanics and Materials 554 (juin 2014) : 355–59. http://dx.doi.org/10.4028/www.scientific.net/amm.554.355.
Texte intégralAnandkumar, V., E. Venkatesan, Baldev Raj, C. Karthikeyan et R. S. Babu. « Laser Welding of Dissimilar Metals with Large Thickness Ratio ». Indian Welding Journal 29, no 2 (1 avril 1996) : 17. http://dx.doi.org/10.22486/iwj.v29i2.182647.
Texte intégralPouranvari, Majid, et Pirooz Marashi. « Resistance Spot Welding of Unequal Thickness Low Carbon Steel Sheets ». Advanced Materials Research 83-86 (décembre 2009) : 1205–11. http://dx.doi.org/10.4028/www.scientific.net/amr.83-86.1205.
Texte intégralAbd Elnabi, Mohamed Mohamed, Tarek Abd Elsadek Osman, Alaa Eldeen El Mokadem et Abou Bakr Elshalakany . « Mechanical Properties and Microstructure of Dissimilar Friction Stir Welding of Pure Aluminum to Low Carbon Steel ». Advanced Journal of Graduate Research 4, no 1 (4 avril 2018) : 47–58. http://dx.doi.org/10.21467/ajgr.4.1.47-58.
Texte intégralThèses sur le sujet "DISSIMILAR THICKNESS"
Gasni, Dedison. « Ultrasonic reflection for measurement of oil film thickness and contact between dissimilar materials ». Thesis, University of Sheffield, 2012. http://etheses.whiterose.ac.uk/2577/.
Texte intégralKOLI, YASHWANT. « MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DISSIMILAR JOINT OBTAINED BY GMAW USING COLD METAL TRANSFER (CMT) ». Thesis, DELHI TECHNOLOGICAL UNIVERSITY, 2021. http://dspace.dtu.ac.in:8080/jspui/handle/repository/18773.
Texte intégralAlali, M. « Through-thickness microstructure and mechanical properties of electron beam similar welded AISI 316L stainless steel and dissimilar welded AISI 316L/Ti6Al4V ». Thesis, University of Sheffield, 2017. http://etheses.whiterose.ac.uk/18019/.
Texte intégralJoesbury, Adam Michael. « New approaches to composite metal joining ». Thesis, Cranfield University, 2015. http://dspace.lib.cranfield.ac.uk/handle/1826/10009.
Texte intégralLin, Yun-Lang, et 林雲朗. « Characteristics of CO2 Laser Welding Dissimilar Thickness Joints of Zinc Coated Steel ». Thesis, 2000. http://ndltd.ncl.edu.tw/handle/03348710143410718615.
Texte intégral國立臺灣科技大學
機械工程系
88
Mechanical properties and formability of laser welded tailo- red blanks were investigated in this study. The zinc coating steels including 1.4mm and 0.75mm thickness were butt joint by high power CO2 laser. Dissimilar thickness butt joint with a gap between the pieces was welded in order to simulate the welded effective of shear-cut requirement. The maximum gap was 0.2mm . Tensile and formability test of the welds showed excellent properties from application point of view. All transverse tensile specimens fractured at base metal. The yield strength of the weldment varied between 142 and 154 MPa. The zinc coating steel has high ductility. The elongation of the base materials is approximately 60%. The similar thickness weldment had more formability than dissimilar thickness weldment. The fractured thickness of specimen in the tension experiment and the local strain of specimen in the forming experiment is adopted as the criterion of fracture.
周英吉. « Optimisation of Laser Welding Parameters for Dissimilar Thickness Joints of Zinc Coated Steel Sheets ». Thesis, 1998. http://ndltd.ncl.edu.tw/handle/10935995380018878505.
Texte intégral國立臺灣科技大學
機械工程技術研究所
86
Optimisation of laser welding parameters for dissimilar thickness butt joints of zinc coated steel sheets was investigated. Laser power, travel speed, focus point, and root opening was the welding parameters in this study. The optimum data with Taguchi experimental method and AIM neural network with simulated annealing algorithm were used to get the optimum profile of joint and its welding parameters. Analysing the result of experiment, it was confirmed that the radius predicted by AIM neural network was more close to the experiment radius than Taguchi experimental method. It predicted that the radius of joint profile was 2.02 mm with the optimum parameters. 800 W laser power, 15 mm/s travel speed, 0.7 mm below the focus point, and without root opening. As a result, the experiment radius was 1.96 mm within 3.1% error which was a good joint profile.
Chapitres de livres sur le sujet "DISSIMILAR THICKNESS"
Dwibedi, Swagat, Swarup Bag, Deepak Kumar Lodhi et Arindam Kalita. « Joining of Different Thickness Dissimilar Materials SS 316L/SS 310 By µ-PAW Process ». Dans Lecture Notes on Multidisciplinary Industrial Engineering, 569–78. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9433-2_49.
Texte intégralMancha, Achilles Enchangan Ulak Anak, Azman Ismail, Fauziah Ab Rahman, Megat Khalid Puteri Zarina et Bakhtiar Ariff Baharudin. « Experimental Study of Friction Stir Welding on Dissimilar Thickness of Aluminum Plate Butt Joints ». Dans Advanced Engineering for Processes and Technologies II, 257–62. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67307-9_22.
Texte intégralWang, Xiaonan, Xiaming Chen, Wenping Weng, Hiromi Nagaumi et Jingzhe Zhou. « Effect of Nickel Foil Thickness on Microstructure and Microhardness of Steel/Aluminium Alloy Dissimilar Laser Welding Joints ». Dans Light Metals 2019, 385–93. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05864-7_49.
Texte intégralHussin, Amer Isyraqi, et Ahmad Baharuddin Abdullah. « Comparison of Joint Configuration for Aluminum 6061 Tailor Welded Blank with Dissimilar Thicknesses Using Friction Stir Welding ». Dans Lecture Notes in Mechanical Engineering, 311–16. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3307-3_27.
Texte intégralRayapandi, Thiraviam, et Suresh P. « An Overview of Welding Methods for Advanced Materials ». Dans Advanced Manufacturing Techniques for Engineering and Engineered Materials, 198–225. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-9574-9.ch012.
Texte intégralActes de conférences sur le sujet "DISSIMILAR THICKNESS"
Tateno, Masayoshi, et Takahiro Miura. « Effects of Metal Thickness on Bonding Strength in Bonded Dissimilar Materials ». Dans ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-29021.
Texte intégralNaumov, A., E. Chernikov, F. Isupov et O. Panchenko. « Friction Stir Welding of Dissimilar in Thickness Al-5Mg Alloy Butt Joints ». Dans MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017/mst_2017_971_977.
Texte intégralNaumov, A., E. Chernikov, F. Isupov et O. Panchenko. « Friction Stir Welding of Dissimilar in Thickness Al-5Mg Alloy Butt Joints ». Dans MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017mst/2017/mst_2017_971_977.
Texte intégralSong, Tae-Kwang, Ji-Soo Kim, Chang-Young Oh, Hong-Yeol Bae, Jun-Young Jeon, Yun-Jae Kim et Young-Suck Chai. « Through-Thickness Welding Residual Stress Profile in Dissimilar Metal Nozzle Butt Weld ». Dans ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25259.
Texte intégralWoo, Wanchuck, Vyacheslav Em, Ho-Jin Lee, Baek-Seok Seong, Kwang Soo Park, Jin Gwi Byeon et Camden R. Hubbard. « Residual Stress Measurements Through the Thickness of the Dissimilar Weld Pipe Using Neutron Diffraction ». Dans ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-58078.
Texte intégralTateno, Masayoshi, et Eiichiro Yokoi. « Dependence of Bonding Temperature Conditions on Metal Thickness Effects in Bonded Dissimilar Materials ». Dans ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45822.
Texte intégralSato, Y. S., F. Yamashita, Y. Sugiura et H. Kokawa. « Forming Property and Microstructure in Dissimilar Thickness Friction Stir Weld of Al Alloy 5052 ». Dans SAE 2006 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2006. http://dx.doi.org/10.4271/2006-01-1393.
Texte intégralBalasubramanian, Manickam, et Ramalingam Kumar. « Prediction of Reliability in Friction Welded Dissimilar Joints by Weibull Distribution ». Dans ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-50621.
Texte intégralSong, Tae-Kwang, Yun-Jae Kim, Yun-Bae Chun, Chang-Yong Oh, Hong-Yeol Bae, Kyoung-Soo Lee et Chi-Yong Park. « Effect of Adjacent Safe End to Piping Weld and Preemptive Weld Overlay Repair on Residual Stresses on Nozzle to Safe End Weld ». Dans ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77376.
Texte intégralNikhare, Chetan P. « Effect of Metal-Composite Layer Thickness on Springback After U-Bending ». Dans ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23155.
Texte intégral