Bibliographies thématiques / Disassemblability / Articles de revues
Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Disassemblability.

Articles de revues sur le sujet « Disassemblability »

Auteur : Grafiati
Publié le 6 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 32 meilleurs articles de revues pour votre recherche sur le sujet « Disassemblability ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

James, Ajith Tom, Om Parkash Gandhi et Sanjeev Govindrao Deshmukh. « Development of methodology for the disassemblability index of automobile systems using a structural approach ». Proceedings of the Institution of Mechanical Engineers, Part D : Journal of Automobile Engineering 231, no 4 (5 août 2016) : 516–35. http://dx.doi.org/10.1177/0954407016656311.

Texte intégral
Résumé :
The time and effort required for maintenance of an automobile system are highly dependent on its disassemblability, which is one of the most important attributes of its maintainability. To evaluate the disassemblability index, i.e. to measure the ease of disassembly, the disassemblability factors (both the design factors and the contextual factors) of an automobile system are identified. These and their interrelations are modelled by considering their structure using the graph theory. The directed graph (digraph) of the disassemblability of the automobile system is defined; the nodes of this represent its disassemblability factors, while the edges represent their degrees of influence. An equivalent matrix of the digraph establishes the system’s disassemblability function which characterizes the disassemblability of the system, leading to development of the disassemblability index. A high value of the disassemblability index indicates that it is very easy to remove or replace parts. The disassemblability index ratio is used to compare the actual conditions of disassembly with the ideal conditions of disassembly. A case study of an automobile gearbox is illustrated using the step-by-step procedure of the proposed methodology of disassemblability. The proposed methodology is helpful to evaluate and compare various alternative designs of the automobile system and, therefore, can aid the design and development of automobile systems from the disassembly viewpoint.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Zhao, Na, Rui Mu, Wei Huang et Wen Guang Lin. « Disassembly Analysis Based on Entropy and Extension Theory ». Advanced Materials Research 569 (septembre 2012) : 472–76. http://dx.doi.org/10.4028/www.scientific.net/amr.569.472.

Texte intégral
Résumé :
In view of the fuzziness and uncertainty characteristics of the index and evaluation incompatibility in the disassembly evaluation process, the disassembly evaluation model of fuzzy matter-element analysis based on entropy was proposed. Firstly, the fuzzy matter-element matrix and weight matrix was established, based on the analysis of the factors having influences on disassemblability. Then the dependent degree of each scheme was calculated to rank disassemblability of the product design schemes. Additionally, the index weight was determined by the method of entropy, which can effectively avoid interference of subjective factors in the process of weight determination. Finally, an example of disassemblability evaluation was given to show the effectiveness of the method.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Shin, C. K., et H. S. Cho. « On the generation of robotic assembly sequences based on separability and assembly motion stability ». Robotica 12, no 1 (janvier 1994) : 7–15. http://dx.doi.org/10.1017/s0263574700018130.

Texte intégral
Résumé :
This paper presents a method for the automatic generation of robotic assembly sequences based on the verification of a disassemblability for a part to be disassembled. To derive the disassemblability of a candidate part, we first inference collision free assembly directions by extracting separable directions for the part and calculating the separability which gives information as to how the part can be easily separated. Using the result, we determine the disassemblability defined in terms of the separability and stability costs. The separability cost represents a facility of the part disassembly operation, while the stability cost represents a degree of the stability for the base assembly motion which gives a guidance for design of jig/fixture. The proposed method provides a potentially local optimal solution for finding a cost effective assembly plan, and the feasibility of generating robot motion programs by evaluating separable directions in flexible manufacturing applications. A case study is given to illustrate the concepts and procedure of the proposed scheme.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Kimura, Fumihiko. « Disassemblability Evaluation for Machine Products. » Journal of the Robotics Society of Japan 13, no 4 (1995) : 456–61. http://dx.doi.org/10.7210/jrsj.13.456.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

OHASHI, Toshijiro, et Yuzo HIROSHIGE. « Environmentally Conscious Manufacturing. Disassemblability Evaluation Method. » Journal of the Japan Society for Precision Engineering 64, no 4 (1998) : 503–7. http://dx.doi.org/10.2493/jjspe.64.503.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Zhu, Hai Tao, et Liang Cong. « Disassembly Sequence Planning of Steam Turbines for Virtual Maintenance ». Key Engineering Materials 572 (septembre 2013) : 335–39. http://dx.doi.org/10.4028/www.scientific.net/kem.572.335.

Texte intégral
Résumé :
Disassembly Sequence planning is the important module of virtual maintenance. Its foundational task is to test the disassemblability of parts, find out all the feasible disassembly sequences of targeted parts and search for the near-optimal disassembly sequence. In the paper, the spherical algorithm is used to test the disassemblability of parts. And then the disassembly direction of parts is determined by rules which are the simplified version of Gaussian map approach. Thus the near-optimal disassembly sequence is found out by optimizing all feasible disassembly sequences of targeted parts by ant colony algorithm. The simulation result of the sequence optimization proves to be the same with manual calculation considering comprehensive cost of the change of disassembly tools and disassembly directions. The set of approaches can be reference for disassembly sequence planning of large-scale mechanical products.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Mok, H. S., H. J. Kim et K. S. Moon. « Disassemblability of mechanical parts in automobile for recycling ». Computers & ; Industrial Engineering 33, no 3-4 (décembre 1997) : 621–24. http://dx.doi.org/10.1016/s0360-8352(97)00207-6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Ha, Jong-Sung, Seung-Hak Choi, Sung-Yong Shin, Kyung-Yong Chwa, Soo-Young Chang et Tony C. Woo. « On Deciding 3D Part Disassemblability and Surface Machinability ». IIE Transactions 28, no 10 (octobre 1996) : 847–54. http://dx.doi.org/10.1080/15458830.1996.11770737.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

HORIUCHI, Hajime, Masakazu KOBAYASHI et Masatake HIGASHI. « 1104 Layout Design Method Considering Disassemblability in Conceptual Design ». Proceedings of Design & ; Systems Conference 2012.22 (2012) : _1104–1_—_1104–9_. http://dx.doi.org/10.1299/jsmedsd.2012.22._1104-1_.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

CHEN, Lianyi, Hideo FUJIMOTO et Alauddin AHMED. « Strategic component design and products disassemblability evaluation for inverse manufacturing ». Proceedings of Manufacturing Systems Division Conference 2002 (2002) : 91–92. http://dx.doi.org/10.1299/jsmemsd.2002.91.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Gonzales, Julirose, Novita Sakundarini, Raja Ariffin et Zahari bin Taha. « Integrated Eco-Design Tool for Malaysian Automobile Industry ». Journal of Advanced Computational Intelligence and Intelligent Informatics 14, no 1 (20 janvier 2010) : 46–54. http://dx.doi.org/10.20965/jaciii.2010.p0046.

Texte intégral
Résumé :
Today’s manufacturing companies are burdened with the pressures of managing their products throughout its life cycles and ensure that their products have minimum impact in the environment through Eco-design methods. This paper looks into the different Product Eco-evaluation methods in terms of Material Recyclability, Manufacturing Process and Disassemblability used for Eco-design, especially in the automobile industry. From these methods, the authors propose an Eco-Design framework suited for Malaysian local automobile SMEs given their limited role in Automobile design.
Styles APA, Harvard, Vancouver, ISO, etc.
12

Desai, Anoop, et Anil Mital. « Evaluation of disassemblability to enable design for disassembly in mass production ». International Journal of Industrial Ergonomics 32, no 4 (octobre 2003) : 265–81. http://dx.doi.org/10.1016/s0169-8141(03)00067-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
13

Parsa, Soran, et Mozafar Saadat. « Intelligent selective disassembly planning based on disassemblability characteristics of product components ». International Journal of Advanced Manufacturing Technology 104, no 5-8 (18 juin 2019) : 1769–83. http://dx.doi.org/10.1007/s00170-019-03857-1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Germani, Michele, Marco Mandolini, Marco Marconi et Marta Rossi. « An Approach to Analytically Evaluate the Product Disassemblability during the Design Process ». Procedia CIRP 21 (2014) : 336–41. http://dx.doi.org/10.1016/j.procir.2014.03.153.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Sawanishi, Hideyuki, Kenta Torihara et Nozomu Mishima. « A Study on Disassemblability and Feasibility of Component Reuse of Mobile Phones ». Procedia CIRP 26 (2015) : 740–45. http://dx.doi.org/10.1016/j.procir.2014.07.090.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Go, T. F., D. A. Wahab, M. N. Ab Rahman, R. Ramli et C. H. Azhari. « Disassemblability of end-of-life vehicle : a critical review of evaluation methods ». Journal of Cleaner Production 19, no 13 (septembre 2011) : 1536–46. http://dx.doi.org/10.1016/j.jclepro.2011.05.003.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

Kobayashi, Masakazu, et Masatake Higashi. « 2110 Optimal design of components layout considering disassemblability, fastening methods and thermal distribution ». Proceedings of the Optimization Symposium 2014.11 (2014) : _2110–1_—_2110–3_. http://dx.doi.org/10.1299/jsmeopt.2014.11.0__2110-1_.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
18

HORIUCHI, Hajime, Masakazu KOBAYASHI et Masatake HIGASHI. « 2307 Optimal Design of Product Layout and Connection between Parts to Improve Disassemblability ». Proceedings of Design & ; Systems Conference 2013.23 (2013) : _2307–1_—_2307–10_. http://dx.doi.org/10.1299/jsmedsd.2013.23._2307-1_.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Zhu, Wenmin, Xiumin Fan et Qichang He. « A hierarchical and process-oriented framework for disassemblability evaluation in product maintainability design ». International Journal of Advanced Manufacturing Technology 110, no 3-4 (16 août 2020) : 777–95. http://dx.doi.org/10.1007/s00170-020-05830-9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

WATANUKI, Keiichi. « Snap-Fit Design Considering Assemblability/Disassemblability and Its Design Review Using Immersive Virtual Environment ». Journal of The Adhesion Society of Japan 43, no 4 (2007) : 149–57. http://dx.doi.org/10.11618/adhesion.43.149.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

WATANUKI, Keiichi, et Shigeru FUKABAYASHI. « Optimal Configuration of Cantilever Hook Type Snap-Fit Considering Assemblability/Disassemblability and Retention Performance ». Proceedings of Conference of Kanto Branch 2004.10 (2004) : 527–28. http://dx.doi.org/10.1299/jsmekanto.2004.10.527.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

KATAGIRI, Haruo. « On the Publication of a Issue on the Design for Assemblability / Disassemblability and Recyclability ». Journal of the Society of Mechanical Engineers 101, no 954 (1998) : 348. http://dx.doi.org/10.1299/jsmemag.101.954_348.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Beng, Lee Guang, et Omar Badrul. « Increasing End-of-Life Recovery Profit Using Axiomatic Design Principles : A Case of Mobile Phone Keypad ». Applied Mechanics and Materials 773-774 (juillet 2015) : 866–70. http://dx.doi.org/10.4028/www.scientific.net/amm.773-774.866.

Texte intégral
Résumé :
Application of axiomatic design (AD) for the purpose of enhancing end-of-life recovery potential of a product has been the main focus of this paper. To demonstrate the usage of AD in this particular area, a case study that involves keypad assemblies of mobile phones is presented. The functional requirements (FR) of the two assemblies were defined differently (only Handset 2 involves refurbishment-related FRs). Using evaluation approach presented by Kwak and Kim (2010), it can be observed that when recovery-related requirements are omitted, application of AD produces a keypad assembly that fulfills the FRs derived from customer needs with more complicated product architecture. In contrast, when recovery-related FRs are included during problem definition using axiomatic approach, the disassemblability of the resulted keypad is improved and thus increasing recovery potential in the event of replacing defective keypad, while satisfying product-related FRs.
Styles APA, Harvard, Vancouver, ISO, etc.
24

Qiu, Lemiao, Xiaojian Liu, Shuyou Zhang et Liangfeng Sun. « Disassemblability modeling technology of configurable product based on disassembly constraint relation weighted design structure matrix(DSM) ». Chinese Journal of Mechanical Engineering 27, no 3 (mai 2014) : 511–19. http://dx.doi.org/10.3901/cjme.2014.03.511.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Karagoz, Selman, Nezir Aydin et Vladimir Simic. « End-of-life vehicle management : a comprehensive review ». Journal of Material Cycles and Waste Management 22, no 2 (16 novembre 2019) : 416–42. http://dx.doi.org/10.1007/s10163-019-00945-y.

Texte intégral
Résumé :
AbstractWaste management is gaining very high importance in recent years. As automotive is one of the most critical sectors worldwide, which is rapidly increasing, the management of end-of-life vehicles (ELVs) gains importance day by day. Due to legislation and new regulations, actors like users, producers, and treatment facilities are being conferred new responsibilities in the ELV management process. Besides, the ELV management is of vital importance for environment conservation, circular economy and sustainable development. All of these reasons are making the ELV management such a crucial issue to study. Today, the ELV management is a well-positioned and emergent research area. However, the available review papers are focused only on a small area of the ELV management, such as reverse logistics, recovery infrastructure, disassemblability, etc. Besides, a review of state-of-the-art mathematical models for the ELV management is still missing. This paper aims to provide an extensive content analysis overview of studies on the ELV management. A total of 232 studies published in the period 2000–2019 are collected, categorized, reviewed and analyzed. A critical review of the published literature is provided. Gaps in the literature are identified to clarify and suggest future research directions. This review can provide a source of references, valuable insights, and opportunities for researchers interested in the ELV management and inspire their additional attention.
Styles APA, Harvard, Vancouver, ISO, etc.
26

Ishikawa, Haruo, Hironobu Yuki et Satoshi Miyazaki. « Design Information Modeling in 3-D CAD System for Concurrent Engineering and Its Application to Evaluation of Assemblability/Disassemblability in Conceptual Design ». Concurrent Engineering 8, no 1 (mars 2000) : 24–31. http://dx.doi.org/10.1177/1063293x0000800103.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Ishikawa, Haruo, Hironobu Yuki et Satoshi Miyazaki. « Design Information Modeling in 3-D CAD System for Concurrent Engineering and Its Application to Evaluation of Assemblability/Disassemblability in Conceptual Design ». Concurrent Engineering : Research and Applications 8, no 1 (1 mars 2000) : 24–31. http://dx.doi.org/10.1106/m50v-0u90-7fqy-jbr6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Erdmann, Julian Grosse, Jan Koller, Jil Brimaire et Frank Döpper. « Assessment of the disassemblability of electric bicycle motors for remanufacturing ». Journal of Remanufacturing, 13 mars 2023. http://dx.doi.org/10.1007/s13243-023-00124-1.

Texte intégral
Résumé :
AbstractIn 2021, sales of electric bicycles in Germany increased compared to the previous year, leading to a 43% share of electric bicycles in the total German bicycle market. The German Bicycle Industry Association (ZIV) expects this growth to continue and that by 2025 every second bicycle sold in Germany will have an electric motor. Therefore, due to the increasing number of sales, both the built-in resources and the possible treatments after the use phase need to be considered regarding sustainable market development. In this context, remanufacturing is one promising end-of-life strategy that enables a new life cycle of products and components, thus reducing the consumption of natural resources and minimizing waste production. The used products are restored to their original conditions by disassembling, cleaning, sorting, reworking, and reassembling. Disassembly is a decisive process step as it creates the prerequisites for all further steps in the process chain and significantly determines the economic feasibility of a remanufacturing process. Therefore, this paper aims to evaluate the ease of disassembly of electric bicycle motors and thus determine their suitability for remanufacturing. To evaluate the disassemblability, the ease of Disassembly Metric (eDiM), a quantitative assessment method for evaluating disassembly effort, was adapted to the needs of the electric bicycle motors. The method was finally applied to five electric bicycle motors from established manufacturers and assessed their ease of disassembly. The results show that the electric bicycle motors can be disassembled without significant damage and classified as suitable for remanufacturing.
Styles APA, Harvard, Vancouver, ISO, etc.
29

« A MODIFIED ANALYTICAL HIERARCHY PROCESS DESIGN EVALUATION METHODS FOR PRODUCT RECOVERY ». Journal of Engineering & ; Technological Advances, 19 octobre 2021. http://dx.doi.org/10.35934/segi.v6i1.16.

Texte intégral
Résumé :
The absence of existing standards for product recovery planning and the associated difficulty in prioritising the conflicting design requirements are among the main challenges faced during product design. In this paper, a concept for the Design for Multiple Life-Cycles (DFMLC) is proposed to address this situation. The objective of the DFMLC model is to assist designers in evaluating design attributes of Multiple Life-Cycle Products (MLCP) at the early design stage. The methodology adopted for the evaluation of MLCP design strategies has been based on a modified Analytical Hierarchy Process (AHP). Two mapping matrices of the design guidelines and design strategies concerning MLCP design attributes were developed for the modified AHP model. Disassemblability (> 21 %) was found to be the most important design element for MLCP followed by serviceability (> 20 %) and reassembly (> 12 %).
Styles APA, Harvard, Vancouver, ISO, etc.
30

Emadi, Jain. « An Assembly Approach for Determining the Maintainability index for Engineered Products ». Journal of Machine and Computing, 5 janvier 2021, 39–47. http://dx.doi.org/10.53759/7669/jmc202101005.

Texte intégral
Résumé :
It is challenging for maintenance of activities to be assured during products’ life cycle when poor maintenance is the case. Poor maintenance of engineered products will lead to an increment in cost and time is fundamental in the development of maintainability tasks for engineering firms. Maintenance design had played a significant role in complex designing of engineering products. This research presents a critical approach to evaluate and determine a maintainability index using the assembly principle. Normally, time is a critical indicator and parameter being utilized to measure maintenance; however, minimal efforts have been focused on assembly components and the principle of assembly. In the past literature works, customer study and survey on the effects of operators’ skills have been done. In this research, maintainability index is determined. Every assembly type is weighted with reference to features such as assembly direction, costs and disassemblability. Resultantly, this research seeks to enhance the efficiency of maintenance of engineered products.
Styles APA, Harvard, Vancouver, ISO, etc.
31

Mesa, Jaime A., et Arturo González-Quiroga. « Development of a diagnostic tool for product circularity : a redesign approach ». Research in Engineering Design, 27 mars 2023. http://dx.doi.org/10.1007/s00163-023-00415-5.

Texte intégral
Résumé :
AbstractThe design of circular products is gaining relevance among academics, practitioners, and industry as a critical step to face material scarcity, the unsustainability of industrial processes, and excessive waste generation. Therefore, product design is a powerful research field to promote material, component, and product circularity throughout several lifecycles. However, there is a lack of formal methods to measure the circularity of products, especially from the early design stages. Therefore, this paper proposes a diagnostic tool for measuring circularity, identifying potential improvement opportunities, and redesigning interventions in the conceptual design phase. The tool consists of eight single indicators that measure disassemblability, reassemblability, durability, modularity, simplicity, standardization, commonality, relative costs, and the number of secondary functions of products. A case study is presented to validate the tool, considering several improvement scenarios around the 6R strategies. Finally, a list of redesign interventions for each improvement scenario was assembled as a primary output of the proposed tool.
Styles APA, Harvard, Vancouver, ISO, etc.
32

Hu, Yang, Raghunathan Srinivasan, Jessica Spoll et Gaurav Ameta. « Graph Based Method and Tool for Complete and Selective Disassembly Time Estimation in Early Design ». Journal of Computing and Information Science in Engineering 15, no 3 (1 septembre 2015). http://dx.doi.org/10.1115/1.4029752.

Texte intégral
Résumé :
The goal of this research is to develop a method and tool (a) to estimate disassembly time automatically from early embodiment design based CAD model and (b) to provide design suggestions to improve product disassemblability. Disassembly is a critical process in the end-of-life (EOL) stage of a product. It is usually followed by sorting and then by material recovery for recycling or part recovery for reuse or remanufacturing. Manual estimation of disassembly time, through physical prototype disassembly or through Boothroyd and Dewhurst system, is time consuming and is not applicable in the early design stage. In this research, graph based data structures and related metrics are utilized to estimate complete and selective disassembly time at embodiment design stage. Selective disassembly is important when a single part of subassembly is to be recovered while the rest of the product is to be discarded. Selective disassembly time is estimated by merging particular nodes in assembly and bipartite graph and then recomputing the graph metrics. The method and algorithm presented in this paper is implemented using SolidWorks application programming interface (API) in Visual C#. Results are compared with the results obtained by Boothroyd and Dewhurst method, the error range is reasonable.
Styles APA, Harvard, Vancouver, ISO, etc.
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie