Bibliographies thématiques / Digital Monitoring of Hazelnut

Littérature scientifique sur le sujet « Digital Monitoring of Hazelnut »

Auteur : Grafiati
Publié le 14 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Digital Monitoring of Hazelnut ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Digital Monitoring of Hazelnut"

1

Contarini, Mario, Luca Rossini, Nicolò Di Sora, Enrico de Lillo et Stefano Speranza. « Monitoring the Bud Mite Pest in a Hazelnut Orchard of Central Italy : Do Plant Height and Irrigation Influence the Infestation Level ? » Agronomy 12, no 8 (22 août 2022) : 1982. http://dx.doi.org/10.3390/agronomy12081982.

Texte intégral
Résumé :
Mite pests are a serious threat for hazelnut cultivations, causing economic losses every year. At least two species of big bud mites, Phytoptus avellanae (Acari: Phytoptidae) and Cecidophyopsis vermiformis (Acari: Eriophyidae), are involved in severe hazelnut bud infestations, even though few studies report P. avellanae as the most present and harmful. Great steps forward have been made in monitoring and management strategies of these mite pests, but a plethora of questions remains unanswered about their ecology and behaviour and how agronomical practices impact populations. Given this precondition, we conducted a four-year monitoring in an experimental hazelnut orchard located in the Viterbo hazelnut district, Central Italy, to: (i) explore the potential effect that irrigation has on mite infestations, (ii) assess if mites locate in a particular band height of hazelnut plants; and (iii) assess the overall field infestation over the years. This study showed that not-irrigated plants and plants irrigated by underground pipe systems were similarly infested. Mites tend to locate in the middle band of the plant, namely from 1.5 to 3 m from the ground. The four-year survey showed an overall increasing infestation trend, with a peak in 2021 for irrigated plants and 2022 for not-irrigated. These results are a milestone for further exploration of the biology and ecology of this pest and to formulate ad hoc monitoring and control strategies as well.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Prelle, Ambra, Davide Spadaro, Angelo Garibaldi et Maria Lodovica Gullino. « Aflatoxin monitoring in Italian hazelnut products by LC-MS ». Food Additives and Contaminants : Part B 5, no 4 (décembre 2012) : 279–85. http://dx.doi.org/10.1080/19393210.2012.711371.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

RÖDER, MARTIN, IRIS BALTRUWEIT, HELWIG GRUYTERS, ANJA IBACH, INGO MÜCKE, REINHARD MATISSEK, STEFAN VIETHS et THOMAS HOLZHAUSER. « Allergen Sanitation in the Food Industry : A Systematic Industrial Scale Approach To Reduce Hazelnut Cross-Contamination of Cookies ». Journal of Food Protection 73, no 9 (1 septembre 2010) : 1671–79. http://dx.doi.org/10.4315/0362-028x-73.9.1671.

Texte intégral
Résumé :
Recently, we investigated the impact of shared equipment on cross-contamination of cookies at a pilot plant scale. Based on those findings, this study investigated the extent and subsequent sanitation of hazelnut cross-contamination (HNCC) of cookies at the industrial scale. Similarly, a product change from cookies with hazelnut ingredient to cookies without hazelnut was performed on standard equipment. HNCC in the hazelnut-free follow-up product was quantified by enzyme-linked immunosorbent assay for each production device and the applied cleaning procedure. All experiments were repeated in duplicate. The highest HNCC was found in concordance with previous studies after mere mechanical scraping: more than 1,000 mg of hazelnut protein per kg was quantified in the follow-up product after processing by a cookie machine. Additional cleaning with hot water decreased the HNCC irrespective of the processing device to levels at or below 1 mg of hazelnut protein per kg. Furthermore, raw materials for cookie production were monitored over a period of 24 months for unwanted preloads of hazelnut and peanut: hazelnut was quantified in 16% of the investigated raw materials as being between 0.26 and 90 mg/kg. Further critical control points at the industrial scale, where cross-contamination might occur, were identified but did not display noteworthy sources of cross-contamination. In conclusion, the quantitative monitoring of the cleaning efficiency at the industrial scale confirmed the procedure of manual scraping plus wet cleaning as a qualified sanitation procedure to effectively reduce the hazelnut protein cross-contamination down to a level at which severe hazelnut-related allergic reactions are unlikely to occur.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Jamil, Akhtar, et Bulent Bayram. « An object-based approach for tree species extraction from digital orthophoto maps ». Proceedings of the ICA 1 (16 mai 2018) : 1–7. http://dx.doi.org/10.5194/ica-proc-1-56-2018.

Texte intégral
Résumé :
Tree segmentation is an active and ongoing research area in the field of photogrammetry and remote sensing. It is more challenging due to both intra-class and inter-class similarities among various tree species. In this study, we exploited various statistical features for extraction of hazelnut trees from 1 : 5000 scaled digital orthophoto maps. Initially, the non-vegetation areas were eliminated using traditional normalized difference vegetation index (NDVI) followed by application of mean shift segmentation for transforming the pixels into meaningful homogeneous objects. In order to eliminate false positives, morphological opening and closing was employed on candidate objects. A number of heuristics were also derived to eliminate unwanted effects such as shadow and bounding box aspect ratios, before passing them into the classification stage. Finally, a knowledge based decision tree was constructed to distinguish the hazelnut trees from rest of objects which include manmade objects and other type of vegetation. We evaluated the proposed methodology on 10 sample orthophoto maps obtained from Giresun province in Turkey. The manually digitized hazelnut tree boundaries were taken as reference data for accuracy assessment. Both manually digitized and segmented tree borders were converted into binary images and the differences were calculated. According to the obtained results, the proposed methodology obtained an overall accuracy of more than 85 % for all sample images.
Styles APA, Harvard, Vancouver, ISO, etc.
5

RÖDER, MARTIN, ANJA IBACH, IRIS BALTRUWEIT, HELWIG GRUYTERS, ANNABELLA JANISE, CAROLA SUWELACK, REINHARD MATISSEK, STEFAN VIETHS et THOMAS HOLZHAUSER. « Pilot Plant Investigations on Cleaning Efficiencies To Reduce Hazelnut Cross-Contamination in Industrial Manufacture of Cookies ». Journal of Food Protection 71, no 11 (1 novembre 2008) : 2263–71. http://dx.doi.org/10.4315/0362-028x-71.11.2263.

Texte intégral
Résumé :
Shared equipment in industrial food manufacture has repeatedly been described as a potential source of unlabeled food allergens, i.e., hidden allergens. However, the impact of shared equipment on allergen cross-contamination is basically unknown. Therefore, we sought to investigate systematically the extent of hazelnut cross-contamination in fine bakery wares as a model. A product change from cookies with 10% hazelnut to cookies without hazelnuts was simulated on pilot plant equipment. The extent of hazelnut cross-contamination (HNCC) was analyzed by enzyme-linked immunosorbent assay (ELISA) for each production device (kneaders, rotary molder, wire cutting machine, and steel band oven) and various cleaning procedures used between products. The experiments were performed repeatedly with finely ground hazelnuts and with roughly chopped hazelnut kernels. Cross-contamination from chopped kernels was distributed statistically but not homogeneously, and sampling and analysis with the ELISA was therefore not reproducible. Further analysis concentrated on homogenously distributed HNCC from ground hazelnut. Apart from product changes without intermediate cleaning, the highest HNCC was found after mechanical scraping: Up to 100 mg/kg hazelnut protein was found in the follow-up product after processing by one machine. After additional cleaning with hot water, the HNCC decreased regardless of the processing device to levels at or below 1 mg/kg hazelnut protein. In our pilot plant study, the application of an appropriate wet cleaning procedure in combination with quantitative monitoring of the cleaning efficiency reduced the hazelnut protein cross-contamination to a level at which severe hazelnut-related allergic reactions are unlikely to occur.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Ivezić, Aleksandar. « The brown marmorated stink bug Halyomorpha halys (Hemiptera : Heteroptera) : A new threat for hazelnut crops in Serbia ». Biljni lekar 48, no 5 (2020) : 488–502. http://dx.doi.org/10.5937/biljlek2005488i.

Texte intégral
Résumé :
Hazelnut crops are damaged by various types of polyphagous true bugs. The most commonly encountered species are representatives of the families Coreidae and Pentatomidae (Hemiptera: Heteroptera) Recent invasion of the exotic brown marmorated stink bug Halyomorpha halys (Stål) (Hemiptera: Pentatomidae) represents a serious threat in many agroecosystems in Europe. Following its first detection, H. halys has become a key pest in many hazelnut crops in Europe, causing damage throughout the entire period of nut and kernel development. The pest causes damage in adults and larval stages by sucking sap from practically all parts of plants. This bug is characterized by a distinct polyphagous behavior, so to date, more than 300 plant species have been identified as food hosts. Halyomorpha halys was first registered in Serbia in October 2015 in the region of Vršac. Detection of brown marmorated bug in hazelnut crops in Serbia calls for caution and requires systematic monitoring of this pest in order to determine an adequate strategy for plant protection and accurate timing of its control. In hazelnut crops, this bug causes damage by sucking juices from the husk, shell and kernel of the fruit, which significantly reduces the quality and market value of the hazelnut fruit. Management of the brown marmorated stink bug in agricultural settings has primarily relied on the use of broad-spectrum of insecticides. In the system of Integrated Pest Management, the control of H. halys is based on a strategy that implies a reduced and effective use of insecticides and a distinct knowledge of the biology and behavior of the pest. Monitoring insect populations is a fundamental component of Integrated Pest Management programs. In a perspective of reduction or avoidance of chemical treatments and preservation of a healthy agroecosystems, such as the, alternative pest management strategies in hazelnut orchards should be further developed. Moreover, as a long-term solution, biological control of H. halys with the natural enemy species, native or introduced, could play a major role in managing this pest, especially in organic farming systems.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Chen, Xi, Ran Zhang, Bing Zhao, Guangjian Fan, Haibo Li, Xinyang Xu et Mingchuan Zhang. « Preparation of Porous Biochars by the Co-Pyrolysis of Municipal Sewage Sludge and Hazelnut Shells and the Mechanism of the Nano-Zinc Oxide Composite and Cu(II) Adsorption Kinetics ». Sustainability 12, no 20 (19 octobre 2020) : 8668. http://dx.doi.org/10.3390/su12208668.

Texte intégral
Résumé :
Municipal sewage sludge (MSS) and hazelnut shells were selected for co-pyrolysis and chemically activated with K2CO3 in a N2 atmosphere. The biochar was then modified by photocatalysis. Hazelnut shells, as a solid waste, were selected as a carbon source additive because of its high cellulose content and similar structure to natural wood. Using hazelnut shells could increase the specific surface area, enhance the porosity, and improve the adsorption capacity of the biochar. Hazelnut shells could also reduce the content of heavy metals in the raw biochar materials, along with increasing the ecological security of biochar and contributing to its further development and utilization. FTIR was used to study the changes in the functional groups on the biochar surface. The layered porous structure of the biochar was observed by SEM. The Cu(II) adsorption capacity of the biochar was 42.28 mg/g after 24 h. The Langmuir and pseudo-second-order models effectively described Cu(II) adsorption.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Nepal, Arjun, Sonam Tashi, Rekha Chhetri, Tshering Dorji, Ugyen Dorji et Sunil Sapkota. « Impacts of Climate Change on Hazelnut (Corylus avellane L.) Cultivation in Bhutan ». Vietnam Journal of Agricultural Sciences 5, no 2 (27 juin 2022) : 1445–55. http://dx.doi.org/10.31817/vjas.2022.5.2.02.

Texte intégral
Résumé :
This study was conducted to evaluate the factors contributing to the spatial distribution of European hazelnut (Corylus avellane L.) in Bhutan and determine the suitable areas for cultivation of the crop in the near future (2040-2060) and distant future (2060-2080) under different climate scenarios of Representative Concentration Pathway (RCP) 2.6 and RCP 4.5 in Bhutan. The environmental layers were obtained from WorldClim and processed in ArcGIS and R software prior to running the model in MaxENT. The multicollinearity test showed six bioclimatic factors and three topographical factors contributing to the distribution of European hazelnut in Bhutan. The findings indicated that approximately 10,744.8 sq. km is potential for hazelnut crop cultivation in Bhutan, with Wangduephodrang District harboring the highest area of 1,227.9 sq. km (11.4%) and Gasa district the least at 130 sq. km. The primary factors affecting climate suitability of European hazelnut were elevation, contributing 87.9%, followed by Bio3 (3.7%), BIO2 (3%), and Bio1 (2.5%), and the least factors were Bio15 and aspect at 0.1% each. The model showed that the most suitable elevation for the growth of hazelnut ranges from 1500-1900 masl. The suitability area for the crop projected under the RCP 2.6 and RCP 4.5 scenarios showed a decline in the near future (2040-2060) in the southern part of the country and a slight increase in the distant future (2061-2080) in Central, Eastern, and Western Bhutan. Therefore, there is an urgent need for climate risk assessment, community-based mitigation measures, and spatial monitoring techniques on agriculture crops in Bhutan.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Spagnuolo, Ludovica, Susanna Della Posta, Chiara Fanali, Laura Dugo et Laura De Gara. « Antioxidant and Antiglycation Effects of Polyphenol Compounds Extracted from Hazelnut Skin on Advanced Glycation End-Products (AGEs) Formation ». Antioxidants 10, no 3 (10 mars 2021) : 424. http://dx.doi.org/10.3390/antiox10030424.

Texte intégral
Résumé :
The advanced glycation end-products (AGEs) arise from non-enzymatic reactions of sugar with protein side chains, some of which are oxido-reductive in nature. Enhanced production of AGEs plays an important role in the pathogenesis of diabetic complications as well as in natural aging, renal failure, oxidative stress, and chronic inflammation. The aim of this work is to study antiglycation effects of polyphenol compounds extracted by hazelnut skin that represents an example of polyphenols-rich food industry by-product, on AGEs formation. AGEs derived from incubation of bovine serum albumin (BSA) and methylglyoxal (MGO) were characterized by fluorescence. The phenolics identification and total polyphenol content in hazelnut skin extracts were analyzed by HPLC-MS and the Folin–Ciocalteu method, respectively. Antioxidant efficacy was evaluated by monitoring total antioxidant activity to assess the ABTS radical scavenging activity of samples by TEAC assay and oxygen radical absorbance capacity (ORAC) assay, expressed as millimoles of Trolox equivalents per gram of sample. Data here presented suggest that phenolic compounds in hazelnut skin have an inhibitory effect on the BSA-AGEs model in vitro, and this effect is concentration-dependent. The putative role of the hazelnut skin antioxidative properties for hindering AGEs formation is also discussed. Because of AGEs contribution to the pathogenesis of several chronic diseases, foods enriched, or supplements containing natural bioactive molecules able to inhibit their production could be an interesting new strategy for supporting therapeutic approaches with a positive effect on human health.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kereselidze, M., G. Goderdzishvili et Z. Khidesheli. « Monitoring damage caused by harmful pests in hazelnut orchards in Samegrelo region, Georgia ». Acta Horticulturae, no 1226 (novembre 2018) : 373–78. http://dx.doi.org/10.17660/actahortic.2018.1226.57.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Digital Monitoring of Hazelnut"

1

Ming, Harry Peter. « Pedestrian monitoring using digital image processing ». Thesis, University of Ulster, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390164.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Ferreira, Francisco Manuel Freire Cardoso. « Digital video applied to air quality monitoring ». Phd thesis, Instituições portuguesas -- UNL-Universidade Nova de Lisboa -- FCT-Faculdade de Ciências e Tecnologia -- -Departamento de Ciências e Engenharia do Ambiente, 1998. http://dited.bn.pt:80/6544.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Huynh, Nguyen. « Digital control and monitoring methods for nonlinear processes ». Link to electronic thesis, 2006. http://www.wpi.edu/Pubs/ETD/Available/etd-100906-083012/.

Texte intégral
Résumé :
Dissertation (Ph.D.)--Worcester Polytechnic Institute.
Keywords: Parametric optimization; nonlinear dynamics; functional equations; chemical reaction system dynamics; time scale multiplicity; robust control; nonlinear observers; invariant manifold; process monitoring; Lyapunov stability. Includes bibliographical references (leaves 92-98).
Styles APA, Harvard, Vancouver, ISO, etc.
4

Dawson, Sarah P. « Digital X-ray analysis for monitoring fracture healing ». Thesis, University of Edinburgh, 2009. http://hdl.handle.net/1842/4285.

Texte intégral
Résumé :
X-ray based evaluation of different stages of fracture healing is a well established clinical standard. However, several studies have shown plain radiography alone to be an unreliable method to assess healing. The advent of digital X-ray systems provides the potential to perform quantitative analysis on X-ray images without disrupting normal clinical practice. Two aspects were explored in this study. The first was the measurement of mechanical fracture stiffness under four point bending and axial loading. The second was the inclusion of an Aluminium step wedge to provide Aluminium-equivalent thickness calibration information. Mechanical sti ness studies involved the development of equipment to perform four point bending on intra-medullary (IM) nailed tibial fractures, equipment to perform axial loading on conservatively treated humeral fractures, and fracture models to ex- amine the developed systems. Computational procedures to automatically measure the angle and offset occurring at the fracture site by comparing loaded and unloaded X-ray images were developed utilising cross-correlation. The apparatus and procedures were tested using the fracture models both in X-ray and using the Zwick materials testing machine. The four point bending system was applied clinically to a series of IM nailed tibial fracture patients and the axial loading system to two conservatively treated humeral fracture patients. Mechanical stiffness results showed that the apparatus worked well in the clinical radiography environment and was unobtrusive to normal practice. The developed X-ray analysis procedure provided reliable measurements. However, in the case of IM nailed tibial fractures, both angular and displacement movements were too small to be accurately assessed or to provide reliable stiffness measurements. This indicated that this patient group was possibly unsuitable for mechanical stiffness measurements or that higher loads needed to be applied to the fracture site. The case studies of conservatively treated humeral fractures showed potential in detecting movement between loaded and unloaded X-rays and using this to provide sti ness information. Further investigation is required to show that this technique has the potential to aid fracture healing monitoring. Investigation into Aluminium step wedge calibration began with the design of different step wedges and X-ray phantoms. Initial image analysis involved studying the automatic processing applied by a digital Computed Radiography (CR) Fuji sys- tem and modelling of the inhomogeneities in X-ray images as well as investigation into the effect of and correction for scatter, overlying soft tissue and bone thickness. Computational procedures were developed to semi-automatically detect the steps of the step wedge, form an exponential Aluminium step thickness to grey level calibration graph, measure soft tissue and bone thickness, and correct for the heel effect and scatter contributions. Tests were carried out on pre-clinical models and results compared to ash weight and peripheral quantitative computed tomography (pQCT). A clinical study of radial fractures was used to investigate the effectiveness of the step wedge calibration system in monitoring fracture healing changes. Results using the step wedge indicated that the calibration technique was e ective in detecting and correcting for aspects in uencing Aluminium-equivalent thickness measures. With careful processing, useful information was obtained from digital X- rays that included the Aluminium step wedge and these correlated well with existing density measures. The use of the wedge in patient images showed that small increases in Aluminium-equivalent thickness of the fracture site could be detected. This was most useful for intra-patient comparisons throughout the course of healing rather than providing quantitative measurements which were comparable to other density measures. In conclusion, this thesis shows the potential for accurate analysis of digital X- rays to aid the monitoring of healing changes in fracture patients, particularly with application of axial loading and the use of step wedge calibration.
Styles APA, Harvard, Vancouver, ISO, etc.
5

El-Sawaf, Amro. « Monitoring changes in field geometry using LANDSAT digital data ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/mq22593.pdf.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Pentaris, Fragkiskos. « Digital signal processing for structural health monitoring of buildings ». Thesis, Brunel University, 2014. http://bura.brunel.ac.uk/handle/2438/10560.

Texte intégral
Résumé :
Structural health monitoring (SHM) systems is a relatively new discipline, studying the structural condition of buildings and other constructions. Current SHM systems are either wired or wireless, with a relatively high cost and low accuracy. This thesis exploits a blend of digital signal processing methodologies, for structural health monitoring (SHM) and develops a wireless SHM system in order to provide a low cost implementation yet reliable and robust. Existing technologies of wired and wireless sensor network platforms with high sensitivity accelerometers are combined, in order to create a system for monitoring the structural characteristics of buildings very economically and functionally, so that it can be easily implemented at low cost in buildings. Well-known and established statistical time series methods are applied to SHM data collected from real concrete structures subjected to earthquake excitation and their strong and weak points are investigated. The necessity to combine parametric and non-parametric approaches is justified and to this direction novel and improved digital signal processing techniques and indexes are applied to vibration data recordings, in order to eliminate noise and reveal structural properties and characteristics of the buildings under study, that deteriorate due to environmental, seismic or anthropogenic impact. A characteristic and potential harming specific case study is presented, where consequences to structures due to a strong earthquake of magnitude 6.4 M are investigated. Furthermore, is introduced a seismic influence profile of the buildings under study related to the seismic sources that exist in the broad region of study.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Skelsey, Chris. « A system for monitoring land cover ». Thesis, University of Aberdeen, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361785.

Texte intégral
Résumé :
Underlying the majority of remotely-sensed data analysis is the assumption that geographical phenomena, such as rivers, heather-moors and the dynamics associated with such objects, can be adequately detected and identified through the use of spectral and other visual information alone. There is a common misconception that any major deficiencies of quantitative analyses are "hardware problems": that by increasing the spectral, spatial, radiometric and temporal resolutions of sensors, geographical phenomena will be identified with similarly increasing accuracy and reliability. This, however, is an unrealistic viewpoint. This thesis has developed a prototype of an automated system based on the principle that by considering the "real-world" properties of the land, a more effective and robust analysis of its dynamic nature can ensue. SYMOLAC is an automated SYstem for MOnitoring LAnd Cover based upon theories of artificial intelligence. It has been developed within a specifically designed hybrid software environment called ETORA, an Environment for Task-Orientated Analysis. This prototype environment allows SYMOLAC to utilise disparate sources of spatial data, to reason with both quantitative and qualitative knowledge, to model disparate domain uncertainties, and to exploit the functionality of third-party software components. Unlike standard approaches, it allows an automated analysis to focus on each particular domain task and how it may best be performed with the available data, knowledge and software resources. The detection of forest felling and the subsequent update of the Land Cover of Scotland (1988) dataset forms the initial application of SYMOLAC. It is concluded that the system's approach is flexible, extensible and adaptable, and demonstrates one way in which satellite imagery can offer potential to the future monitoring of complex land cover change without the need for human intervention.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Hadley, Robin. « Monitoring system for free form modeling machines at Digital Mechanics ». Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-9505.

Texte intégral
Résumé :

Digital Mechanics is a company in Västerås manufacturing mainlyprototypes for it customers. To do this they use a number of free formingmachines. The building time of these machines differ very much from theestimated time required to build a job and this effects the efficiency of theproduction. The work presented in this paper is mainly about designing andconstructing a monitoring application for the machines at DigitalMechanics. The application will be used for alerting the operators when amachine is not building and preempt machines stopping because they runout of material to increase quality and efficiency in the production. Thesystem may also be used as the core of a future, more advanced, monitoringsystem.The thesis also included a study about how the estimation of the timerequired by the machines to build a job could be enhanced.Because of the nature of the business at Digital Mechanics theimprovement of quality and efficiency deriving from this monitoringapplication is difficult to measure, but the machine operators claim they areassisted by it.

Styles APA, Harvard, Vancouver, ISO, etc.
9

Anderson, Jason. « Developing Digital Monitoring Protocols for Use in Volunteer Stream Assessment ». Virginia Tech, 2001. http://hdl.handle.net/10919/37149.

Texte intégral
Résumé :
The traditional paper-based method of field data collection has always been a time-consuming and cumbersome process. Agency personnel in the field complete a standard evaluation form, which is then returned to the office and entered into a computer database for storage and analysis. Throughout this process, data can easily be lost or misinterpreted. As data requirements continue to expand, field data collection can quickly overwhelm a regulatory agency's manpower and resources, which only serves to exacerbate these problems. Recent technological developments can help agencies and organizations keep up with this growing demand and have begun to change the method of data collection and management. The overall goal of this study is to develop, demonstrate, and evaluate a digital protocol for the use of technology in a volunteer stream monitoring application and draw conclusions on its applicability as a more effective means of data collection in a wide variety of fields. The protocol includes digital evaluation forms and integrated help files for use in the field. The digital evaluation forms are based on paper evaluation forms developed by researchers conducting a stream corridor assessment of Stroubles Creek in Blacksburg, Virginia. The protocol was developed using available hardware and software. Collected data can be downloaded directly from a Personal Digital Assistant (PDA) and stored on a hard drive or system server. The data can then be input directly into a Geographic Information System (GIS) database to enhance the visualization and usefulness of the information. The GIS allows surveyors to view the relationships among the many factors affecting the stream, as well as preparing the data for advanced analysis. Two examples are provided: a field application of the protocol on streams currently listed for Total Maximum Daily Load (TMDL) development; and an environmental education setting in a Virginia elementary school. Conclusions drawn from these applications are also described.
Master of Urban and Regional Planning
Styles APA, Harvard, Vancouver, ISO, etc.
10

Norcliffe, Brian Andrew Woodfield. « A study of a digital image based monitoring system for slopes ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq20684.pdf.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Digital Monitoring of Hazelnut"

1

Mezydlo, Nicole. Digital Photogrammetry for Long-Term Monitoring. [New York, N.Y.?] : [publisher not identified], 2017.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Ming, Harry Peter. Pedestrian monitoring using digital image processing. [S.l : The Author], 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Mäkivirta, Aki. Use of the median filter in haemodynamic monitoring. Espoo : Technical Research Centre of Finland, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

N, Lane Stuart, Richards K. S et Chandler Jim H, dir. Landform monitoring, modelling, and analysis. Chichester : Wiley, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Zimmerman, Peter D. Using Synthesized Images to Establish Monitoring Capabilities. Hamburg [Germany] : Institut für Friedensforschung und Sicherheitspolitik an der Universität Hamburg, 1995.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Vlasov, Vladimir, Veniamin Bogumil et Ali Baytulaev. Digital infrastructure and telematics systems for monitoring the maintenance of roads. ru : INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1014643.

Texte intégral
Résumé :
The textbook gives the concept of digital infrastructure, shows its role as the technological basis of modern telematics systems for monitoring the maintenance of roads. The issues of creating and using elements of digital infrastructure in the road sector, as well as technological processes of automated control of maintenance of roads, streets, and highways are considered. The requirements for the main functions and characteristics of the telematics equipment of road vehicles and mechanisms are given. The material of the manual is based on the results of theoretical research and practical work on the creation and implementation of automated control systems for the maintenance of roads. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students studying in technical areas of training and specialties.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Charalambous, Andreas, dir. Developing and Utilizing Digital Technology in Healthcare for Assessment and Monitoring. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60697-8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

IEEE Power Engineering Society. Energy Development and Power Generation Committee., Institute of Electrical and Electronics Engineers. et IEEE Standards Board, dir. IEEE application guide for distributed digital control and monitoring for power plants. New York, N.Y., USA : Institute of Electrical and Electronics Engineers, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Robert, Fischl, Kam Moshe et Langley Research Center, dir. Formulation of a strategy for monitoring control integrity in critical digital control systems. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

J, Peters Kara, Society of Photo-optical Instrumentation Engineers., American Society of Mechanical Engineers., Intelligent Materials Forum (Mitō Kagaku Gijutsu Kyōkai), Jet Propulsion Laboratory (U.S.) et National Science Foundation (U.S.), dir. Sensor systems and networks : Phenomena, technology, and applications for NDE and health monitoring 2007. Bellingham, Wash : SPIE, 2007.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Digital Monitoring of Hazelnut"

1

Rembovsky, Anatoly M., Alexander V. Ashikhmin, Vladimir A. Kozmin et Sergey M. Smolskiy. « Digital Radio Receivers and Direction-Finders ». Dans Radio Monitoring, 175–267. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74277-9_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Vierhauser, Michael, et Alexander Egyed. « Runtime Monitoring for Systems of System ». Dans Digital Transformation, 203–22. Berlin, Heidelberg : Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-65004-2_8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Rembovsky, Anatoly M., Alexander V. Ashikhmin, Vladimir A. Kozmin et Sergey M. Smolskiy. « Detection and Identification of Digital Radio Sources ». Dans Radio Monitoring, 381–453. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74277-9_9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Milani, Fredrik. « Business Analysis Plan and Monitoring ». Dans Digital Business Analysis, 111–25. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05719-0_6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Henningsson, Stefan, et Gustav Normark Toppenberg. « Continuation : Monitoring Progression ». Dans Architecting Growth in the Digital Era, 77–84. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-39482-0_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Smith, David R. « Transmission System Testing, Monitoring, and Control ». Dans Digital Transmission Systems, 491–519. Boston, MA : Springer US, 1985. http://dx.doi.org/10.1007/978-1-4757-1185-1_11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Smith, David R. « Transmission System Testing, Monitoring, and Control ». Dans Digital Transmission Systems, 662–704. Boston, MA : Springer US, 2004. http://dx.doi.org/10.1007/978-1-4419-8933-8_11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Salah, Philippe, et K. Hero Breuning. « Monitoring of Tooth Movement ». Dans Digital Planning and Custom Orthodontic Treatment, 55–63. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119087724.ch8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Baumers, Martin, et John Dominy. « Planning and Monitoring Projects ». Dans Practical Management for the Digital Age, 381–412. Boca Raton : CRC Press, 2021. http://dx.doi.org/10.1201/9781003222903-19.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Sause, Markus G. R. « Digital Image Correlation ». Dans In Situ Monitoring of Fiber-Reinforced Composites, 57–129. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30954-5_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Digital Monitoring of Hazelnut"

1

Cesnek, Peter. « DIGITAL PHOTOGRAMMETRY FOR CRACKS MONITORING ». Dans 17th International Multidisciplinary Scientific GeoConference SGEM2017. Stef92 Technology, 2017. http://dx.doi.org/10.5593/sgem2017/22/s09.030.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Lee, Hye Ji, Sarah Fadda, Lorena F. S. Souza et Jong Min Lee. « Digital application of bioreactor monitoring ». Dans 2021 21st International Conference on Control, Automation and Systems (ICCAS). IEEE, 2021. http://dx.doi.org/10.23919/iccas52745.2021.9649767.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

SINGH, VICTOR, et KAREN WILLCOX. « Engineering Design with Digital Thread ». Dans Structural Health Monitoring 2017. Lancaster, PA : DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/shm2017/13943.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Reginasari, Annisa, Tina Afiatin, Bhina Patria et Kokom Komariah. « Digital Monitoring Experience in Digital Media and the Internet ». Dans Annual International Conference on Social Sciences and Humanities (AICOSH 2020). Paris, France : Atlantis Press, 2020. http://dx.doi.org/10.2991/assehr.k.200728.007.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

MISHRA, SPANDAN, HOWARD CHUNG, HARISH SURENDRANATH et FU-KUO CHANG. « Digital Structural Health Monitoring for SHM Design ». Dans Structural Health Monitoring 2017. Lancaster, PA : DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/shm2017/13942.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Wong, Wilson, et Tom Kvan. « Agent support for monitoring collaborative design knowledge ». Dans eCAADe 2003 : Digital Design. eCAADe, 2003. http://dx.doi.org/10.52842/conf.ecaade.2003.075.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Wong, Wilson, et Tom Kvan. « Agent support for monitoring collaborative design knowledge ». Dans eCAADe 2003 : Digital Design. eCAADe, 2003. http://dx.doi.org/10.52842/conf.ecaade.2003.075.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Carreras, Normandino, Spartacus Gomariz, Antoni Manuel, Montserrat Carbonell, Angel David Moure, Pedro Antonio Torres et Ramon Ortiz. « Digital system for monitoring volcanic seismicity ». Dans 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2015. http://dx.doi.org/10.1109/i2mtc.2015.7151449.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Mohana, H. S., et Mahanthesha U. « Smart Digital Monitoring for Attendance System ». Dans 2018 International Conference on Recent Innovations in Electrical, Electronics & Communication Engineering (ICRIEECE). IEEE, 2018. http://dx.doi.org/10.1109/icrieece44171.2018.9009166.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Sharma, Neeraj Anand, Kunal Kumar et A. B. M. Shawkat Ali. « A Digital Monitoring System for Parents ». Dans 2019 IEEE Asia-Pacific Conference on Computer Science and Data Engineering (CSDE). IEEE, 2019. http://dx.doi.org/10.1109/csde48274.2019.9162406.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Digital Monitoring of Hazelnut"

1

Cottrell, Les. Monitoring the Digital Divide. Office of Scientific and Technical Information (OSTI), mai 2003. http://dx.doi.org/10.2172/813037.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Palaviccini, Miguel, Daniel Z. Turner et Michael Herzberg. Digital Image Correlation for Performance Monitoring. Office of Scientific and Technical Information (OSTI), février 2016. http://dx.doi.org/10.2172/1238316.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Moodie, John, Tuulia Rinne, Johanna Alakerttula, Henrika Ruokonen et Johanna Leino. Developing and Managing Innovation Ecosystems in the Circular Economy - Outline of a Digital Monitoring Tool. Nordregio, août 2018. http://dx.doi.org/10.30689/pb2018:4.2001-3876.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Alonso-Muñoz, L., et A. Casero-Ripollés. Transparency and political monitoring in the digital environment. Towards a typology of citizen-driven platforms. Revista Latina de Comunicación Social, novembre 2017. http://dx.doi.org/10.4185/rlcs-2017-1223en.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Verluyten, L., et M. W. Peters. Online monitoring of laserpulses using the GPIB-interface of a Tektronix 2430 Digital Storage Oscilloscope. Office of Scientific and Technical Information (OSTI), octobre 1987. http://dx.doi.org/10.2172/6034768.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Walker, Cody, Vivek Agarwal, Nancy Lybeck, Mike Taylor et Pradeep Ramuhalli. Analytics-at-scale of Sensor Data for Digital Monitoring in Nuclear Plants : 2nd Annual Report. Office of Scientific and Technical Information (OSTI), février 2021. http://dx.doi.org/10.2172/1769952.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Walker, Cody, Vivek Agarwal, Nancy Lybeck, Pradeep Ramuhalli et Mike Taylor. Analytics-at-scale of Sensor Data for Digital Monitoring in Nuclear Plants 3rd Annual Report. Office of Scientific and Technical Information (OSTI), février 2022. http://dx.doi.org/10.2172/1843841.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Liu, C. T., Lee M. Klynn et Jay D. Thompson. Monitoring Microstructural Evolution and Crack Formation in a Solid Propellant under Incremental Strain Condition- Using Digital Radiography X-Ray Techniques. Fort Belvoir, VA : Defense Technical Information Center, février 2004. http://dx.doi.org/10.21236/ada423473.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Liu, C. T., Lee M. Kylnn et Jay D. Thompson. Monitoring Micro-Structural Evolution and Crack Formation in a Solid Propellant Under Incremental Strain Condition-Using Digital Radiograph X-Ray Techniques. Fort Belvoir, VA : Defense Technical Information Center, mars 2004. http://dx.doi.org/10.21236/ada422518.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Fritz, Brugger, Bezzola Selina, Hochet Peter et Salavessa João. Public monitoring of the economic, social and environmental effect of industrial mining. Swiss National Science Foundation (SNSF), mai 2020. http://dx.doi.org/10.46446/publication_r4d.2020.2.en.

Texte intégral
Résumé :
The transition to renewable energy and a digital economy increases the demand for minerals. The development impact of resource extraction is the green economy’s Achilles heel. The Resource Impact Dashboard (RID) is an evidence-based policy instrument to encourage constructive dialogue between stakeholders about concerns related to economic, social, environmental and institutional outcomes of industrial mining. Results from the pilot-phase corroborate the necessity and the promises of public monitoring and deliberation.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Digital Monitoring of Hazelnut » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie