Bibliographies thématiques / Digital laser / Articles de revues
Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Digital laser.

Articles de revues sur le sujet « Digital laser »

Auteur : Grafiati
Publié le 12 avril 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Digital laser ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Guang Zheng, B. Wang, T. Fang, H. Cheng, Y. Qi, Y. W. Wang, B. X. Yan et al. « Laser Digital Cinema Projector ». Journal of Display Technology 4, no 3 (septembre 2008) : 314–18. http://dx.doi.org/10.1109/jdt.2008.924163.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Shimura, Mikihiko, Koichi Imanaka, Hiroshi Sekii, Akira Fujimoto et Takeshi Takagi. « Semiconductor laser digital scanner ». Optical Engineering 29, no 3 (1990) : 230. http://dx.doi.org/10.1117/12.55582.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ichioka, Y., T. Kobayashi, H. Kitagawa et T. Suzuki. « Digital scanning laser microscope ». Applied Optics 24, no 5 (1 mars 1985) : 691. http://dx.doi.org/10.1364/ao.24.000691.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Piqué, Alberto, Heungsoo Kim, Ray Auyeung, Jiwen Wang, Andrew Birnbaum et Scott Mathews. « Laser-Based Digital Microfabrication ». NIP & ; Digital Fabrication Conference 25, no 1 (1 janvier 2009) : 394–97. http://dx.doi.org/10.2352/issn.2169-4451.2009.25.1.art00108_1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Li, Qingfeng, David Grojo, Anne-Patricia Alloncle, Boris Chichkov et Philippe Delaporte. « Digital laser micro- and nanoprinting ». Nanophotonics 8, no 1 (16 octobre 2018) : 27–44. http://dx.doi.org/10.1515/nanoph-2018-0103.

Texte intégral
Résumé :
AbstractLaser direct writing is a well-established ablation technology for high-resolution patterning of surfaces, and since the development of additive manufacturing, laser processes have also appeared very attractive for the digital fabrication of three-dimensional (3D) objects at the macro-scale, from few millimeters to meters. On the other hand, laser-induced forward transfer (LIFT) has demonstrated its ability to print a wide range of materials and to build functional micro-devices. For many years, the minimum size of laser-printed pixels was few tens of micrometers and is usually organized in two dimensions. Recently, new approaches have been investigated, and the potential of LIFT technology for printing 2D and 3D sub-micrometer structures has become real. After a brief description of the LIFT process, this review presents the pros and cons of the different digital laser printing technologies in the aim of the additive nanomanufacturing application. The transfer of micro- and nano-dots in the liquid phase from a solid donor film appears to be the most promising approach to reach the goal of 3D nanofabrication, and the latest achievements obtained with this method are presented and discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Huang, Cing-Yi, Kuo-Chih Chang et Shu-Chun Chu. « Experimental Investigation of Generating Laser Beams of on-Demand Lateral Field Distribution from Digital Lasers ». Materials 12, no 14 (10 juillet 2019) : 2226. http://dx.doi.org/10.3390/ma12142226.

Texte intégral
Résumé :
A new type of laser system, known as a digital laser, was proposed in 2013. Many well-known laser beams with known analytical forms have been successfully generated in digital lasers. However, for a light field that does not have an analytical form, such as a multi-point light field or a light field with an arbitrary lateral distribution, how to generate such a light field from a digital laser has not been explored. The goal of this study was to experimentally explore how to generate an on-demand lateral laser field in a digital laser. In this study, a multi-point Gaussian laser beam was successfully generated in a digital laser by both controlling the range of the laser gain and the modulation of the phase boundary of the end of the cavity. This study then generated laser beams with an on-demand lateral field distribution by generating a superimposed multi-point laser field in a digital laser. Examples of triangles, rectangles, and letter T-shaped light fields produced by digital lasers were experimentally demonstrated. In summary, this study experimentally showed that a laser beam with an on-demand lateral field distribution could be generated in a digital laser by generating a superimposed multi-point laser field in a digital laser, in which a laser gain region covering the entire intra-cavity multi-point light field and the projected SLM (spatial light modulator) modulation function adopting a mimic amplitude mask are both used.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Plesch, A., U. Klingbeil et J. Bille. « Digital laser scanning fundus camera ». Applied Optics 26, no 8 (15 avril 1987) : 1480. http://dx.doi.org/10.1364/ao.26.001480.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Ngcobo, Sandile, Igor Litvin, Liesl Burger et Andrew Forbes. « Demonstrating a Rewritable Digital Laser ». Optics and Photonics News 24, no 12 (1 décembre 2013) : 28. http://dx.doi.org/10.1364/opn.24.12.000028.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Lang, Marion, Rudolf Neuhaus et Jürgen Stuhler. « Digital Revolution in Laser Control ». Optik & ; Photonik 10, no 1 (février 2015) : 38–41. http://dx.doi.org/10.1002/opph.201500005.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kowalik, John, John J. Rosinski et Bradford R. Siepman. « Digital business telephones-project laser ». Bell Labs Technical Journal 3, no 1 (14 août 2002) : 122–33. http://dx.doi.org/10.1002/bltj.2097.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Graf, Thomas. « The Laser Boosts Digital Manufacturing ». PhotonicsViews 17, no 3 (28 mai 2020) : 1. http://dx.doi.org/10.1002/phvs.202070301.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

Huang, Xue Lin, et Wen Yan Jiang. « Research on Reproduction Characteristics of Digital Laser Plate ». Advanced Materials Research 499 (avril 2012) : 293–97. http://dx.doi.org/10.4028/www.scientific.net/amr.499.293.

Texte intégral
Résumé :
Flexographic printing is growing at explosive rate now. With many kinds of plate has introduced, digital laser plate becomes mainstream technique. By experiment method, the microscopic of digital laser plate was analysis, the difference of platemaking process and printing results between digital laser plate and traditional plate was detail probed and the reproduction characteristics of digital laser plate were discusses. Results showed that digital laser plate brings smaller dot gains, broader color gamut and higher printing contrast; it greatly improved the quality of flexographic printing.
Styles APA, Harvard, Vancouver, ISO, etc.
13

Lee, Younggeun, Jinhyeong Kwon, Jaemook Lim, Wooseop Shin, Sewoong Park, Eunseung Hwang, Jaeho Shin et al. « Digital Laser Micropainting : Digital Laser Micropainting for Reprogrammable Optoelectronic Applications (Adv. Funct. Mater. 1/2021) ». Advanced Functional Materials 31, no 1 (janvier 2021) : 2170002. http://dx.doi.org/10.1002/adfm.202170002.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Lin, Yuan-Yao. « Digital laser with composite resonator for optiocal vortex laser generation ». EPJ Web of Conferences 307 (2024) : 04020. http://dx.doi.org/10.1051/epjconf/202430704020.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Zhiyuan Song, Zhiyuan Song, Li Feng Li Feng, Shaolan Zhu Shaolan Zhu, Haodong He Haodong He, Cunxiao Gao Cunxiao Gao et Linquan Niu Linquan Niu. « All-digital pulse generator for gradually modulated semiconductor laser ». Chinese Optics Letters 9, s1 (2011) : s10306–310307. http://dx.doi.org/10.3788/col201109.s10306.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Kanev, Kamen D., Petro V. Gnatyuk et Volodymyr A. Gnatyuk. « Laser Marking in Digital Encoding of Surfaces ». Advanced Materials Research 222 (avril 2011) : 78–81. http://dx.doi.org/10.4028/www.scientific.net/amr.222.78.

Texte intégral
Résumé :
In this work we consider some laser based methods and technologies for surface engraving and layered marking of opaque and transparent materials. Based on that, physical object surface and sub-surface layers can be enhanced with digital codes for augmented security and more advanced human-computer interactions. Laser procedures for creating digitally encoded layers in various materials are investigated and one of the mechanisms of laser-induced formation of marks (micro-cracks) in transparent materials is discussed in more details.
Styles APA, Harvard, Vancouver, ISO, etc.
17

Tsai, Zheng-Xian, Kuo-Chih Chang et Shu-Chun Chu. « Pattern control of a Q-switched pulsed laser with a dual-cavity configuration digital laser ». Chinese Optics Letters 23, no 1 (2025) : 011404. https://doi.org/10.3788/col202523.011404.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
18

Nancarrow, Jane-Heloise. « Countering the "Digital Uncanny" ». Studies in Digital Heritage 3, no 2 (13 juin 2020) : 170–85. http://dx.doi.org/10.14434/sdh.v3i2.27748.

Texte intégral
Résumé :
Photogrammetry and laser scanning, or combinations of the two, are increasingly used in cultural heritage settings to create three-dimensional digital replicas. Yet the technical production processes involved can sometimes result in undesirable outcomes – flattening shadows, light, and surface textural variations of original artifacts. Many of these important visual cues contribute to our understanding of digital models as ‘historical objects,’ and the resulting overly digitized photogrammetry – lacking visual context and depth – can impede user interactivity. Viewers of digital heritage can become deterred by the uncanny, static, or unreal aesthetic of some photogrammetric and laser scans. This article considers two digital heritage projects: “Emotions3D: Bringing Digital Heritage to Life,”and the Smithsonian Apollo 11 Command Module scans in order to explore how technical and curatorial decisions can address issues in photogrammetric and laser post-processing. While often subtle, different post-processing choices are perceived and deeply cognitively and emotionally internalized by viewers and users of digital cultural heritage. Therefore, this paper assesses the relevance of emotions studies, theories of the ‘uncanny’ and the ‘uncanny valley,’ and issues of authenticity and best-practice digital interventions to enhance user engagement and accessibility through digital post-processing techniques.
Styles APA, Harvard, Vancouver, ISO, etc.
19

Murzin, Serguei P. « Digital Engineering in Photonics : Optimizing Laser Processing ». Photonics 11, no 10 (4 octobre 2024) : 935. http://dx.doi.org/10.3390/photonics11100935.

Texte intégral
Résumé :
This article explores the transformative impact of digital engineering on photonic technologies, emphasizing advancements in laser processing through digital models, artificial intelligence (AI), and freeform optics. It presents a comprehensive review of how these technologies enhance efficiency, precision, and control in manufacturing processes. Digital models are pivotal for predicting and optimizing thermal effects in laser processing, thereby reducing material deformation and defects. The integration of AI further refines these models, improving productivity and quality in applications such as micromachining and cladding. Additionally, the combination of AI with freeform optics advances laser technology by enabling real-time adjustments and customizable beam profiles, which enhance processing versatility and reduce material damage. The use of digital twins is also examined as a key development in laser-based manufacturing, offering significant improvements in process optimization, defect reduction, and system efficiency. By incorporating real-time monitoring, machine learning, and physics-based modeling, digital twins facilitate precise simulations and predictions, leading to more effective and reliable manufacturing practices. Overall, the integration of digital twins, AI, and freeform optics into laser processing marks a significant progression in manufacturing technology. These advancements collectively enhance precision, efficiency, and adaptability, resulting in improved product quality and reduced operational costs. The continued evolution of these technologies is expected to drive further advancements in manufacturing practices, offering more robust solutions for complex production environments.
Styles APA, Harvard, Vancouver, ISO, etc.
20

AHRENS, Wilhelm H. « Application of Laser to Digital Printing. Digital Plate Making System. » Review of Laser Engineering 25, no 9 (1997) : 639–42. http://dx.doi.org/10.2184/lsj.25.639.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

KITAMURA, Takashi. « Application of Laser to Digital Printing. » Review of Laser Engineering 25, no 9 (1997) : 621–24. http://dx.doi.org/10.2184/lsj.25.621.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

Piqué, Alberlto. « Digital Microfabrication by Laser Decal Transfer ». Journal of Laser Micro/Nanoengineering 3, no 3 (décembre 2008) : 163–69. http://dx.doi.org/10.2961/jlmn.2008.03.0007.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Lohr, U. « Digital Elevation Models By Laser Scanning ». Photogrammetric Record 16, no 91 (avril 1998) : 105–9. http://dx.doi.org/10.1111/0031-868x.00117.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
24

Colbourne, Paul. « Digital laser microinterferometer and its applications ». Optical Engineering 42, no 5 (1 mai 2003) : 1417. http://dx.doi.org/10.1117/1.1564103.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Akiwowo, Kerri, Faith Kane, John Tyrer, George Weaver et Andrew Filarowski. « Digital Laser-dyeing for Polyester Fabrics ». Journal of Textile Design Research and Practice 2, no 2 (novembre 2014) : 133–51. http://dx.doi.org/10.2752/205117814x14228978833457.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
26

HUERTER, CHRISTOPHER J., RONALD G. WHEELAND, PHILIP L. BAILIN et JOHN LOUIS RATZ. « Lasers : Treatment of Digital Myxoid Cysts with Carbon Dioxide Laser Vaporization ». Journal of Dermatologic Surgery and Oncology 13, no 7 (juillet 1987) : 723–27. http://dx.doi.org/10.1111/j.1524-4725.1987.tb00541.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Fidder, Herman, Joris P. J. Admiraal, Václav Ocelík et Jeff Th M. De Hosson. « In Situ Digital Image Correlation Observations of Laser Forming ». Metals 10, no 1 (21 décembre 2019) : 17. http://dx.doi.org/10.3390/met10010017.

Texte intégral
Résumé :
In this study experimental and modelling methods are used to examine the microstructural and bending responses of laser-formed commercially pure titanium grade 2. The in situ bending angle response is measured for different processing parameters utilizing 3D digital image correlation. The microstructural changes are observed using electron backscatter diffraction. Finite element modelling is used to analyse the heat transfer and temperature field inside the material. It has been proven that the laser bending process is not only controlled by processing parameters such as laser power and laser beam scanning speed, but also by surface absorption. Grain size appears to have no influence on the final bending angle, however, sandblasted samples showed a considerably higher final bending angle. Experimental and simulation results suggest that the laser power has a larger influence on the final bending angle than that of the laser transverse speed. The microstructure of the laser heat-affected zone consists of small refined grains at the top layer followed by large elongated grains. Deformation mechanisms such as slip and twinning were observed in the heat-affected zone, where their distribution depends on particular processing parameters.
Styles APA, Harvard, Vancouver, ISO, etc.
28

Li, Jin Hua, De Qiang Zhang, Zhi Chao Su et Fang Ping Yao. « The Research of Moulds Digital Repairing Based on Laser Cladding ». Advanced Materials Research 860-863 (décembre 2013) : 2678–81. http://dx.doi.org/10.4028/www.scientific.net/amr.860-863.2678.

Texte intégral
Résumé :
The technology was put forward on mould broken areas 3D digital remanufacturing. Based on CAD and laser cladding, it is finished including 3D repairing-trajectory modeling, editing manufacturing program and laser cladding processing. The pre-processing tasks are the experiment of laser cladding parameter, the broken areas pretreatment and measurement, and the repairing task is finished by machining after laser cladding.
Styles APA, Harvard, Vancouver, ISO, etc.
29

Yokoyama, H., et H. Chikatsu. « AUTOMATIC TREE DATA REMOVAL METHOD FOR TOPOGRAPHY MEASUREMENT RESULT USING TERRESTRIAL LASER SCANNER ». ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-2/W3 (23 février 2017) : 659–64. http://dx.doi.org/10.5194/isprs-archives-xlii-2-w3-659-2017.

Texte intégral
Résumé :
Recently, laser scanning has been receiving greater attention as a useful tool for real-time 3D data acquisition, and various applications such as city modelling, DTM generation and 3D modelling of cultural heritage sites have been proposed. And, former digital data processing were demanded in the past digital archive techniques for cultural heritage sites. However, robust filtering method for distinguishing on- and off-terrain points by terrestrial laser scanner still have many issues. In the past investigation, former digital data processing using air-bone laser scanner were reported. Though, efficient tree removal methods from terrain points for the cultural heritage are not considered. In this paper, authors describe a new robust filtering method for cultural heritage using terrestrial laser scanner with "the echo digital processing technology" as latest data processing techniques of terrestrial laser scanner.
Styles APA, Harvard, Vancouver, ISO, etc.
30

Murzin, Serguei P. « Digital Engineering in Diffractive Optics for Precision Laser Processing ». Photonics 12, no 4 (27 mars 2025) : 306. https://doi.org/10.3390/photonics12040306.

Texte intégral
Résumé :
This article focuses on the application of digital engineering in diffractive optics for precision laser material processing. It examines methods for the development of diffractive optical elements (DOEs) and adaptive management approaches that enhance the accuracy and efficiency of laser processing. Key achievements are highlighted in numerical modeling, machine learning applications, and geometry optimization of optical systems, along with the integration of dynamic DOEs with laser systems for adaptive beam control. The discussion includes the development of complex diffractive structures with improved characteristics and new optimization approaches. Special attention is given to the application of DOEs in micro- and nanostructuring, additive manufacturing technologies, and their integration into high-performance laser systems. Additionally, challenges related to the thermal stability of materials and the complexity of adaptive DOE control are explored, as well as the role of artificial intelligence in enhancing laser processing efficiency.
Styles APA, Harvard, Vancouver, ISO, etc.
31

Nguyen Thi, Ly Ly, Ko-Fan Tsai et Shu-Chun Chu. « Generating Optical Vortex Array Laser Beams of Superimposing Hermite–Gaussian Beams with a Dual–Phase Modulation Digital Laser System ». Photonics 11, no 6 (15 juin 2024) : 563. http://dx.doi.org/10.3390/photonics11060563.

Texte intégral
Résumé :
This study presents an efficient and practical intra-cavity approach for selectively generating vortex array laser beams employing a dual-phase modulation digital laser system, which has not yet been completed in single-phase modulation digital laser. The stable optical vortex array laser beams were formed by superimposing cavity Hermite–Gaussian (HG) eigenmodes. In particular, when the selected cavity HG modes shared the same Gouy phase, the resulting optical vortex beam could preserve its light field pattern, thereby maintaining the optical vortex properties in the near and far fields. Numerical results demonstrated that employing dual-phase modulation could establish optimal boundary conditions for the selection of HG modes within the cavity, successfully generating various vortex array laser beams. The experimental validation of the proposed method confirmed the ability to select optical vortex array lasers solely by controlling the loaded phase of the dual-phase modulation digital laser. These results demonstrate the ability of digital lasers to generate and dynamically control optical vortex array lasers.
Styles APA, Harvard, Vancouver, ISO, etc.
32

Gao, X., M. Li, L. Xing et Y. Liu. « JOINT CALIBRATION OF 3D LASER SCANNER AND DIGITAL CAMERA BASED ON DLT ALGORITHM ». ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-3 (30 avril 2018) : 377–80. http://dx.doi.org/10.5194/isprs-archives-xlii-3-377-2018.

Texte intégral
Résumé :
Design a calibration target that can be scanned by 3D laser scanner while shot by digital camera, achieving point cloud and photos of a same target. A method to joint calibrate 3D laser scanner and digital camera based on Direct Linear Transformation algorithm was proposed. This method adds a distortion model of digital camera to traditional DLT algorithm, after repeating iteration, it can solve the inner and external position element of the camera as well as the joint calibration of 3D laser scanner and digital camera. It comes to prove that this method is reliable.
Styles APA, Harvard, Vancouver, ISO, etc.
33

Luo, Yingxin, Hongyin Li et Hsien-Chi Yeh. « Note : Digital laser frequency auto-locking for inter-satellite laser ranging ». Review of Scientific Instruments 87, no 5 (mai 2016) : 056105. http://dx.doi.org/10.1063/1.4950862.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Bura, M., J. Janowski, P. Wężyk et K. Zięba. « THE DIGITAL VON FAHRENHEID PYRAMID ». ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-2/W5 (18 août 2017) : 105–11. http://dx.doi.org/10.5194/isprs-archives-xlii-2-w5-105-2017.

Texte intégral
Résumé :
3D Scanners Lab from Digital Humanities Laboratory at the University of Warsaw initiated the scientific project, the purpose of which was to call attention to systematically penetrated and devastated pyramid-shaped tomb from the XVIII/XIX century, of family von Fahrenheid in Rapa in Banie Mazurskie commune (NE Poland). By conducting a series of non-invasive studies, such as 3D inventory using terrestrial laser scanning (TLS), thermal imaging, georadar measurements (around and inside the tomb) and anthropological research of mummified remains as well - the complete dataset was collected. Through the integration of terrestrial (TLS) and airborne laser scanning (ALS) authors managed to analyse the surroundings of Fahrenheid pyriamid and influence of some objects (like trees) on the condition and visibility of the Pyramids in the landscape.
Styles APA, Harvard, Vancouver, ISO, etc.
35

Barnowski, Daniel, Martin Dahmen, Tamás Farkas, Dirk Petring, Ulrich Petschke, Marcel Pootz, Ralf Schäl et Stoyan Stoyanov. « Multifunctional laser processing with a digital twin ». Procedia CIRP 111 (2022) : 822–26. http://dx.doi.org/10.1016/j.procir.2022.08.091.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
36

Kaleris, Konstantinos, Bjoern Stelzner, Panagiotis Hatziantoniou, Dimosthenis Trimis et John Mourjopoulos. « Laser-Sound Transduction From Digital ΣΔ Streams ». Journal of the Audio Engineering Society 70, no 1/2 (26 janvier 2021) : 50–61. http://dx.doi.org/10.17743/jaes.2021.0053.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
37

Silverstein, Barry D., Andrew F. Kurtz, Joseph R. Bietry et Gary E. Nothhard. « 25.4 : A Laser-Based Digital Cinema Projector ». SID Symposium Digest of Technical Papers 42, no 1 (juin 2011) : 326–29. http://dx.doi.org/10.1889/1.3621311.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

Chirkin, M. V., A. V. Molchanov, V. V. Klimakov, V. Yu Mishin, A. E. Serebryakov et G. V. Davydov. « LASER GYROSCOPE MECHANICAL DITHER DIGITAL CONTROL SYSTEM ». Vestnik of Ryazan State Radio Engineering University 72 (2020) : 3–12. http://dx.doi.org/10.21667/1995-4565-2020-72-3-12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Shi, Bing-Chuan, Xiao-Lei Wang, Wen-Gang Guo et Li-Pei Song. « Characteristic of femtosecond laser pulsed digital holography ». Chinese Physics B 24, no 8 (août 2015) : 084202. http://dx.doi.org/10.1088/1674-1056/24/8/084202.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

Burt, James D., Mark Siddins et Wayne A. Morrison. « Laser Photoirradiation in Digital Flexor Tendon Repair ». Plastic and Reconstructive Surgery 108, no 3 (septembre 2001) : 688–94. http://dx.doi.org/10.1097/00006534-200109010-00013.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
41

Kuehne, Alexander J. C., Malte C. Gather, Irwin A. Eydelnant, Seok-Hyun Yun, David A. Weitz et Aaron R. Wheeler. « A switchable digital microfluidic droplet dye-laser ». Lab on a Chip 11, no 21 (2011) : 3716. http://dx.doi.org/10.1039/c1lc20405j.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
42

HIRAOKA, Toru, Tatsuro OCHI et Yusuke ISOBE. « Digital Watermarking for Airborne Laser Scanner Data ». Journal of the Japan society of photogrammetry and remote sensing 50, no 5 (2011) : 290–95. http://dx.doi.org/10.4287/jsprs.50.290.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
43

Taylor, Geoff W., et Heath Opper. « A New Digital OptoElectronic Switch (DOES) Laser ». IEEE Journal of Quantum Electronics 53, no 3 (juin 2017) : 1–10. http://dx.doi.org/10.1109/jqe.2017.2682699.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
44

Keller, P. J., et E. H. K. Stelzer. « Digital Scanned Laser Light Sheet Fluorescence Microscopy ». Cold Spring Harbor Protocols 2010, no 5 (1 mai 2010) : pdb.top78. http://dx.doi.org/10.1101/pdb.top78.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
45

Horchani, R. « Femtosecond laser shaping with digital light processing ». Optical and Quantum Electronics 47, no 8 (26 mai 2015) : 3023–30. http://dx.doi.org/10.1007/s11082-015-0188-0.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
46

Levi, A. F. J., R. N. Nottenburg, R. A. Nordin, T. Tanbun‐Ek et R. A. Logan. « Multielectrode quantum well laser for digital switching ». Applied Physics Letters 56, no 12 (19 mars 1990) : 1095–97. http://dx.doi.org/10.1063/1.102578.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
47

Chekurov, Sergei, et Tapio Lantela. « Selective Laser Melted Digital Hydraulic Valve System ». 3D Printing and Additive Manufacturing 4, no 4 (décembre 2017) : 215–21. http://dx.doi.org/10.1089/3dp.2017.0014.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
48

Calloni, E., A. Brillet, C. N. Man, F. Barone, F. Fusco, R. DeRosa, L. DiFiore, A. Grado, L. Milano et G. Russo. « Digital alignment system for a laser beam ». Physics Letters A 193, no 1 (septembre 1994) : 15–20. http://dx.doi.org/10.1016/0375-9601(94)00598-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
49

Lee, Younggeun, Jinhyeong Kwon, Jaemook Lim, Wooseop Shin, Sewoong Park, Eunseung Hwang, Jaeho Shin et al. « Digital Laser Micropainting for Reprogrammable Optoelectronic Applications ». Advanced Functional Materials 31, no 1 (28 septembre 2020) : 2006854. http://dx.doi.org/10.1002/adfm.202006854.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
50

Jo, Y. H., et J. Y. Kim. « THREE-DIMENSIONAL DIGITAL DOCUMENTATION OF HERITAGE SITES USING TERRESTRIAL LASER SCANNING AND UNMANNED AERIAL VEHICLE PHOTOGRAMMETRY ». ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-2/W5 (18 août 2017) : 395–98. http://dx.doi.org/10.5194/isprs-archives-xlii-2-w5-395-2017.

Texte intégral
Résumé :
Three-dimensional digital documentation is an important technique for the maintenance and monitoring of cultural heritage sites. This study focuses on the three-dimensional digital documentation of the Magoksa Temple, Republic of Korea, using a combination of terrestrial laser scanning and unmanned aerial vehicle (UAV) photogrammetry. Terrestrial laser scanning mostly acquired the vertical geometry of the buildings. In addition, the digital orthoimage produced by UAV photogrammetry had higher horizontal data acquisition rate than that produced by terrestrial laser scanning. Thus, the scanning and UAV photogrammetry were merged by matching 20 corresponding points and an absolute coordinate system was established using seven ground control points. The final, complete threedimensional shape had perfect horizontal and vertical geometries. This study demonstrates the potential of integrating terrestrial laser scanning and UAV photogrammetry for three-dimensional digital documentation. This new technique is expected to contribute to the three-dimensional digital documentation and spatial analysis of cultural heritage sites.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Digital laser » pour d’autres types de sources :
Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie