Littérature scientifique sur le sujet « Diesel fuel injector »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Diesel fuel injector ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Diesel fuel injector"
RYBAK, Arkadiusz, Jacek HUNICZ, Paweł KRZACZEK, Wojciech GOLIMOWSKI et Damian MARCINKOWSKI. « Effect of different biofuels on common rail injector flow rate ». Combustion Engines 171, no 4 (1 novembre 2017) : 39–43. http://dx.doi.org/10.19206/ce-2017-407.
Texte intégralTuccar, Gökhan, Göktürk Memduh Özkan et Kadir Aydın. « Determınatıon of Atomızatıon Characterıstıcs of a Dıesel Injector ». Applied Mechanics and Materials 799-800 (octobre 2015) : 826–30. http://dx.doi.org/10.4028/www.scientific.net/amm.799-800.826.
Texte intégralStepien, Zbigniew, Aleksander Mazanek et Andrzej Suchecki. « Impact of fuel on real diesel injector performance in field test ». Proceedings of the Institution of Mechanical Engineers, Part D : Journal of Automobile Engineering 232, no 8 (30 septembre 2017) : 1047–59. http://dx.doi.org/10.1177/0954407017725671.
Texte intégralLiu, Qi, Guang Yao Ouyang, Shi Jie An et Yu Peng Sun. « Numerical Simulation of the Effects of the Nozzle Parameters on In-Cylinder Fuel and Air Mixing Process ». Applied Mechanics and Materials 401-403 (septembre 2013) : 218–21. http://dx.doi.org/10.4028/www.scientific.net/amm.401-403.218.
Texte intégralMata, Carmen, Jakub Piaszyk, José Antonio Soriano, José Martín Herreros, Athanasios Tsolakis et Karl Dearn. « Impact of Alternative Paraffinic Fuels on the Durability of a Modern Common Rail Injection System ». Energies 13, no 16 (12 août 2020) : 4166. http://dx.doi.org/10.3390/en13164166.
Texte intégralSKOWRON, Maciej, et Ireneusz PIELECHA. « Optical tests as the basis for formulating mathematical models of the opening delay of CIDI injectors ». Combustion Engines 171, no 4 (1 novembre 2017) : 185–92. http://dx.doi.org/10.19206/ce-2017-431.
Texte intégralORLIŃSKI, Piotr, Marcin WOJS, Mateusz BEDNARSKI et Mieczysław SIKORA. « Evaluation of the effect of the addition of bioethanol to gas oil on coking diesel engine injector terminals ». Combustion Engines 178, no 3 (1 juillet 2019) : 71–75. http://dx.doi.org/10.19206/ce-2019-313.
Texte intégralSOCHACZEWSKI, Rafał, Zbigniew CZYŻ et Ksenia SIADKOWSKA. « Modeling a fuel injector for a two-stroke diesel engine ». Combustion Engines 170, no 3 (1 août 2017) : 147–53. http://dx.doi.org/10.19206/ce-2017-325.
Texte intégralLiu, Dai, Yingzhu Guo, Long Liu, Qian Xia et Yong Gui. « Optimization of Marine Medium Speed Diesel Engine Performance based on Multi-Injector System ». E3S Web of Conferences 236 (2021) : 01026. http://dx.doi.org/10.1051/e3sconf/202123601026.
Texte intégralIsmael, Mhadi Abaker, Morgan Ramond Heikal et Masri Ben Baharoom. « Spray Characteristics of Diesel-CNG Dual Fuel Jet Using Schlieren Imaging Technique ». Applied Mechanics and Materials 663 (octobre 2014) : 58–63. http://dx.doi.org/10.4028/www.scientific.net/amm.663.58.
Texte intégralThèses sur le sujet "Diesel fuel injector"
Bergstrand, David. « Investigation of Internal Diesel Injector Deposits on fuel injector performance for proposal of injector test rig test method ». Thesis, Uppsala universitet, Elektricitetslära, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-417012.
Texte intégralReid, Benjamin A. « An optical investigation of cavitation phenomena in true-scale high-pressure diesel fuel injector nozzles ». Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6358.
Texte intégralCarreres, Talens Marcos. « Thermal effects influence on the Diesel injector performance through a combined 1D modelling and experimental approach ». Doctoral thesis, Universitat Politècnica de València, 2016. http://hdl.handle.net/10251/73066.
Texte intégral[ES] El sistema de inyección es uno de los elementos que más interés ha despertado en la investigación en el campo de los motores diésel de inyección directa, debido a su papel clave en la atomización y vaporización del combustible así como en el proceso de mezcla, que afectan directamente al consumo y la generación de ruido y emisiones contaminantes. Las crecientes presiones de inyección en motores modernos han propiciado la necesidad de estudiar fenómenos como la cavitación, flujo compresible o el efecto de los cambios de las propiedades del combustible a lo largo del proceso, cuya importancia relativa era menor en etapas tempranas del desarrollo de los motores alternativos. Las pequeñas dimensiones de los conductos del inyector, las altas velocidades a través de los mismos y la naturaleza transitoria del proceso dificultan la observación directa en estas cuestiones. Por ello, las herramientas computacionales han proporcionado una ayuda inestimable en el campo. El objetivo de la presente tesis es analizar la influencia de los efectos térmicos en el funcionamiento de un inyector diésel. Para tal fin, se debe estimar la variación de la temperatura del combustible a lo largo de las restricciones internas del inyector. La influencia de estos cambios en las propiedades termofísicas del combustible más relevantes en el sistema de inyección también debe ser evaluada, debido a su impacto en la dinámica del inyector y en la forma de la tasa de inyección. Para dar respuesta a estos objetivos, se han utilizado técnicas experimentales y computacionales. Se ha llevado a cabo una caracterización dimensional e hidráulica de un inyector Bosch CRI 2.20 actuado mediante solenoide, incluyendo medidas de tasa de inyección en un amplio rango de condiciones de operación, para lo que se ha prestado especial atención al control de la temperatura del combustible. Se ha implementado un modelo 1D del inyector para confirmar y extender las observaciones extra\'idas de los experimentos. El modelo considera variaciones locales de presión y temperatura del combustible gracias a la hipótesis de flujo adiabático, para lo cual también se ha tenido que llevar a cabo una caracterización experimental de las propiedades del combustible a alta presión. Los límites de la validez de esta hipótesis se han analizado cuidadosamente en el estudio. Los resultados muestran una influencia significativa de la temperatura del combustible a la entrada del inyector en la tasa y duración de inyección, atribuida al efecto de la variación de las propiedades del combustible y al hecho de que el inyector permanece en operación balística para la mayoría de sus condiciones de funcionamiento. Los cambios en temperatura del combustible a lo largo de los orificios de control del inyector son capaces de modificar su dinámica considerablemente. Además, si el combustible a la entrada del inyector se encuentra a temperatura ambiente o por encima, se ha observado que la temperatura a la salida de la tobera no varía de manera importante una vez se alcanzan condiciones estacionarias. No obstante, un calentamiento significativo puede tener lugar para temperaturas de entrada típicas de las condiciones de arranque en frío.
[CAT] El sistema d'injecció és un dels elements que més interés ha despertat en la investigació en el camp dels motors dièsel d'injecció directa, degut al seu paper clau en l'atomització i vaporització del combustible, així com en el procés de mescla, que afecten directament el consum i la generació de soroll i emissions contaminants. Les creixents pressions d'injecció en motors moderns han propiciat la necessitat d'estudiar fenòmens com la cavitació, flux compressible o l'efecte dels canvis de les propietats del combustible al llarg del procés, la importància relativa dels quals era menor en les primeres etapes del desenvolupament dels motors alternatius. Les menudes dimensions dels conductes de l'injector, les altes velocitats a través dels mateixos i la natura transitòria del procés dificulten l'observació directa en estes qüestions. Per això, les ferramentes computacionals han proporcionat una ajuda inestimable en el camp. L'objectiu de la present tesi és analitzar la influència dels efectes tèrmics en el funcionament d'un injector dièsel. Per a tal fi, es deu estimar la variació de la temperatura del combustible al llarg de les restriccions internes de l'injector. La influència d'estos canvis en les propietats termofísiques del combustible més relevants en el sistema d'injecció també ha de ser avaluada, degut al seu impacte en la dinàmica de l'injector i en la forma de la tasa d'injecció. Per tal de donar resposta a estos objectius, s'han utilitzat tècniques experimentals i computacionals. S'ha dut a terme una caracterització dimensional i hidràulica d'un injector Bosch CRI 2.20 actuat mitjançant solenoide, incloent mesures de tasa d'injecció en un ampli rang de condicions d'operació, per al que s'ha prestat especial atenció al control de la temperatura del combustible. S'ha implementat un model 1D de l'injector per tal de confirmar i estendre les observacions extretes dels experiments. El model considera variacions locals de pressió i temperatura del combustible gràcies a la hipòtesi de flux adiabàtic, per la qual cosa també s'ha hagut de dur a terme una caracterització experimental de les propietats del combustible a alta pressió. Els límits de la validesa d'esta hipòtesi s'han analitzat acuradament en l'estudi. Els resultats mostren una influència significativa de la temperatura del combustible a l'entrada de l'injector en la tasa i duració d'injecció, atribuïda a l'efecte de la variació de les propietats del combustible i al fet que l'injector roman en operació balística per a la majoria de les seues condicions de funcionament. Els canvis en temperatura del combustible al llarg dels orificis de control de l'injector són capaços de modificar la seua dinàmica considerablement. A més, si el combustible a l'entrada de l'injector es troba a temperatura ambient o per damunt, s'ha observat que la temperatura a l'eixida de la tobera no varia de manera important una vegada s'han assolit condicions estacionàries. No obstant això, un escalfament significatiu pot tenir lloc per a temperatures d'entrada típiques de les condicions d'arrancada en fred.
Carreres Talens, M. (2016). Thermal effects influence on the Diesel injector performance through a combined 1D modelling and experimental approach [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73066
TESIS
PAOLICELLI, FEDERICA. « Hydraulic circuit layout analysis, diagnostics and control of the injection process in Common Rail diesel fuel injection systems ». Doctoral thesis, Politecnico di Torino, 2017. http://hdl.handle.net/11583/2690958.
Texte intégralKönigsson, Fredrik. « Advancing the Limits of Dual Fuel Combustion ». Licentiate thesis, KTH, Förbränningsmotorteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-96945.
Texte intégralQC 20120626
Diesel Dual Fuel
Sjöberg, Magnus. « The rotating injector as a tool for exploring DI diesel combustion and emissions formation processes ». Doctoral thesis, KTH, Machine Design, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3208.
Texte intégralA diesel fuel injector has been modified to allow rotationaround its axis, driven by an electric motor. Injections at upto 6000 rpm from the rotating injector have been investigatedunder the influence of air swirl on one optical research engineand one optically accessible heavy-duty diesel engine.
The experiments show that changing from a normal, staticinjection to a sweeping injection has profound effects on sprayformation, dispersion and penetration. This influences thefuel/air-mixing, autoignition, combustion rate and emissionsformation. The spray propagation is stronger influenced byinjector rotation than by air swirl.
The air entrainment into the spray increases forcounter-swirl rotation of the injector and this speeds up thevaporization and decreases the formation of soot. In addition,the oxidation of soot is enhanced since the counter-swirlinjection forces the intense fuel-rich and soot containingspray core to penetrate into fresh air instead of replenishingthe rich regions in the head of the spray. Fuel accumulationalong the piston bowl wall decreases as an effect of thereduced penetration with counter-swirl injection. Altogether,this decreases the smoke emissions for low and intermediateengine loads.
For the combustion system studied, counter-swirl rotation ofthe injector cannot decrease the smoke emissions at high engineload since the reduced spray penetration impairs the airutilization. Fast and efficient combustion at high loadrequires spray induced flame spread out into the squish region.Spray induced flow of cool fresh air from the bottom of thepiston bowl in towards the injector is also important for lowsoot formation rates.
Co-swirl rotation of the injector reduces the airentrainment into the spray and increases the soot formation.The increased smoke and CO emissions with co-swirl injectionare also attributed to the excessively large fuel-rich regionsbuilt up against the piston bowl wall.
Increased air swirl generally reduces smoke and COemissions. This is mainly an effect of enhanced burnout due tomore intense mixing after the end of fuel injection.
Changes in smoke as an effect of injector rotation aregenerally accompanied with opposite, but relatively small,changes in NO. Fast and efficient burnout is important for lowsmoke emissions and this raises both the temperature andproduction of NO. NO production is strongly influenced by thein-cylinder conditions during the latter part of themixing-controlled combustion and in the beginning of theburnout.
Keywords:diesel spray combustion, rotating injector,air swirl, air/fuel-mixing, soot, NO, CO, flame visualization,Chemkin modeling, soot deposition
Gavaises, Manolis. « Modelling of diesel fuel injection processes ». Thesis, Imperial College London, 1997. http://hdl.handle.net/10044/1/8681.
Texte intégralWåhlin, Fredrik. « Direct-injected HCCI with diesel fuel / ». Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-518.
Texte intégralBaniasad, Mohammad Saeid. « Analysis of fuel injection rate in diesel injection systems ». Thesis, Imperial College London, 1994. http://hdl.handle.net/10044/1/7439.
Texte intégralPark, Talus. « Dual fuel conversion of a direct injection diesel engine ». Morgantown, W. Va. : [West Virginia University Libraries], 1999. http://etd.wvu.edu/templates/showETD.cfm?recnum=460.
Texte intégralTitle from document title page. Document formatted into pages; contains x, 96 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 61-62).
Livres sur le sujet "Diesel fuel injector"
GmbH, Robert Bosch, dir. Diesel fuel-injection : An overview. 2e éd. Stuttgart : Robert Bosch, 1996.
Trouver le texte intégral-O, Riesenberg K., et Robert Bosch GmbH, dir. Diesel fuel injection : An overview. 2e éd. Stuttgart : Bosch, 1994.
Trouver le texte intégralBowler, D. Diesel fuel injection and control. Milton Keynes : Delta Press, 1987.
Trouver le texte intégralGmbH, Robert Bosch, dir. Diesel distributor fuel-injection pumps : Diesel engine managment. 3e éd. Stuttgart : Robert Bosch, 1994.
Trouver le texte intégralEngineers, Society of Automotive, et SAE World Congress (2006 : Detroit, Mich.), dir. Diesel fuel injection and sprays 2006. Warrendale, Pa : Society of Automotive Engineers, 2006.
Trouver le texte intégralGmbH, Robert Bosch, dir. Diesel distributor fuel-injection pumps VE. 4e éd. Stuttgart : Robert Bosch, 1999.
Trouver le texte intégralGmbH, Robert Bosch, dir. Diesel in-line fuel-injection pumps. 2e éd. Stuttgart : Robert Bosch, 1994.
Trouver le texte intégralGmbH, Robert Bosch, dir. Diesel in-line fuel-injection pumps. 2e éd. Stuttgart : Robert Bosch, 1996.
Trouver le texte intégralEngineers, Society of Automotive, et SAE World Congress (2005 : Detroit, Mich.), dir. Diesel fuel injection and sprays 2005. Warrendale, Pa : Society of Automotive Engineers, 2005.
Trouver le texte intégralInternational Off-Highway & Powerplant Congress & Exposition (1985 Milwaukee, Wis.). Fuel injection equipment : Analysis and design. Warrendale, PA : Society of Automotive Engineers, 1985.
Trouver le texte intégralChapitres de livres sur le sujet "Diesel fuel injector"
Yasukawa, Yoshihito, Eiji Ishii, Kazuki Yoshimura et Kiyotaka Ogura. « Fuel Spray Analysis Near Nozzle Outlet of Fuel Injector During Valve Movement ». Dans 10. Tagung Diesel- und Benzindirekteinspritzung 2016, 345–62. Wiesbaden : Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-15327-4_17.
Texte intégralTraver, Michael, Yuanjiang Pei, Tom Tzanetakis, Roberto Torelli, Christopher Powell et Sibendu Som. « Investigation and Simulation of Gasoline in a Diesel Fuel Injector for Gasoline Compression Ignition Applications ». Dans Proceedings, 423–42. Wiesbaden : Springer Fachmedien Wiesbaden, 2018. http://dx.doi.org/10.1007/978-3-658-23181-1_21.
Texte intégralLomakin, G. V., V. E. Lazarev et V. M. Myslyaev. « Experimental Estimation of Influence of Fuel Injector Nozzle Design on Output Parameters of Tractor Diesel ». Dans Proceedings of the 4th International Conference on Industrial Engineering, 119–26. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95630-5_12.
Texte intégralHilgers, Michael, et Wilfried Achenbach. « The Fuel System and Fuel Injection ». Dans The Diesel Engine, 25–29. Berlin, Heidelberg : Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-60857-9_5.
Texte intégralEgler, Walter, Rolf Jürgen Giersch, Friedrich Boecking, Jürgen Hammer, Jaroslav Hlousek, Patrick Mattes, Ulrich Projahn, Winfried Urner et Björn Janetzky. « Fuel Injection Systems ». Dans Handbook of Diesel Engines, 127–74. Berlin, Heidelberg : Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-89083-6_5.
Texte intégralWintrich, Thomas, et Meike Keller. « Basic principles of diesel fuel injection ». Dans Diesel Engine Management, 60–71. Wiesbaden : Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-03981-3_6.
Texte intégralGrieshabe, Hermann, et Jens Olaf Stein. « Overview of diesel fuel-injection systems ». Dans Diesel Engine Management, 72–77. Wiesbaden : Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-03981-3_7.
Texte intégralProjahn, Ulrich, Helmut Randoll, Erich Biermann, Jörg Brückner, Karsten Funk, Thomas Küttner, Walter Lehle et Joachim Zuern. « Fuel Injection System Control Systems ». Dans Handbook of Diesel Engines, 175–91. Berlin, Heidelberg : Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-89083-6_6.
Texte intégralGrieshaber, Hermann, et Olaf Stein. « Basic principles of diesel fuel injection ». Dans Fundamentals of Automotive and Engine Technology, 40–51. Wiesbaden : Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-03972-1_5.
Texte intégralKarathanassis, Ioannis K., Foivos (Phoevos) Koukouvinis et Manolis Gavaises. « Multiphase Phenomena in Diesel Fuel Injection Systems ». Dans Energy, Environment, and Sustainability, 95–126. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0335-1_8.
Texte intégralActes de conférences sur le sujet "Diesel fuel injector"
Njere, Darlington, et Nwabueze Emekwuru. « Fuel spray vapour distribution correlations for a high pressure diesel fuel spray cases for different injector nozzle geometries. » Dans ILASS2017 - 28th European Conference on Liquid Atomization and Spray Systems. Valencia : Universitat Politècnica València, 2017. http://dx.doi.org/10.4995/ilass2017.2017.4951.
Texte intégralAllocca, Luigi, S. Alfuso, A. Montanaro, G. Valentino et M. Lolli. « Innovative Lift Direct Command to Inner Hydraulic Circuit Injector Comparison for Diesel Engines ». Dans ASME 2006 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/icef2006-1518.
Texte intégralGoto, Shinichi, et Kazuo Kontani. « A Dual Fuel Injector for Diesel Engines ». Dans 1985 SAE International Off-Highway and Powerplant Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1985. http://dx.doi.org/10.4271/851584.
Texte intégralFarooqi, Q. R., S. Anwar et B. Snyder. « Diesel Engine Injector Waveform Monitoring in Real-Time for Fuel Efficiency ». Dans ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89188.
Texte intégralSinko, K. M., S. Shih et B. Chehroudi. « Emission Characteristics of a Dual-Injector Diesel Fuel Injection System ». Dans International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1996. http://dx.doi.org/10.4271/960839.
Texte intégralWakai, Kensuke, Keiya Nishida, Takuo Yoshizaki et Hiroyuki Hiroyasu. « Ignition Delays of DME and Diesel Fuel Sprays Injected by a D.I. Diesel Injector ». Dans International Fuels & Lubricants Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1999. http://dx.doi.org/10.4271/1999-01-3600.
Texte intégralMiers, Scott A., Alan L. Kastengren, Essam M. El-Hannouny et Douglas E. Longman. « An Experimental Investigation of Biodiesel Injection Characteristics Using a Light-Duty Diesel Injector ». Dans ASME 2007 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/icef2007-1735.
Texte intégralGrochowina, Marcus, Daniel Hertel, Simon Tartsch et Thomas Sattelmayer. « Ignition of Diesel Pilot Fuel in Dual-Fuel Engines ». Dans ASME 2018 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icef2018-9671.
Texte intégralPowell, C. F., A. L. Kastengren, Z. Liu et K. Fezzaa. « The Effects of Diesel Injector Needle Motion on Spray Structure ». Dans ASME 2009 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/icef2009-14076.
Texte intégralJohnson, Samuel E., Jaclyn E. Nesbitt et Jeffrey D. Naber. « Mass and Momentum Flux Measurements With a High Pressure Common Rail Diesel Fuel Injector ». Dans ASME 2010 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/icef2010-35171.
Texte intégralRapports d'organisations sur le sujet "Diesel fuel injector"
Chapman, Elana M., Andre L. Boehman, Kimberly Wain, Wallis Lloyd, Joseph M. Perez, Donald Stiver et Joseph Conway. IMPACT OF DME-DIESEL FUEL BLEND PROPERTIES ON DIESEL FUEL INJECTION SYSTEMS. Office of Scientific and Technical Information (OSTI), juillet 2002. http://dx.doi.org/10.2172/802864.
Texte intégralElana M. Chapman, Andre Boehman, Kimberly Wain, Wallis Lloyd, Joseph M. Perez, Donald Stiver et Joseph Conway. IMPACT OF DME-DIESEL FUEL BLEND PROPERTIES ON DIESEL FUEL INJECTION SYSTEMS. Office of Scientific and Technical Information (OSTI), avril 2004. http://dx.doi.org/10.2172/828878.
Texte intégralElana M. Chapman, Andre Boehman, Kimberly Wain, Wallis Lloyd, Joseph M. Perez, Donald Stiver et Joseph Conway. IMPACT OF DME-DIESEL FUEL BLEND PROPERTIES ON DIESEL FUEL INJECTION SYSTEMS. Office of Scientific and Technical Information (OSTI), juin 2003. http://dx.doi.org/10.2172/821275.
Texte intégralLacey, Paul I., et Sidney J. Lestz. Fuel Lubricity Requirements for Diesel Injection Systems. Fort Belvoir, VA : Defense Technical Information Center, février 1991. http://dx.doi.org/10.21236/ada235972.
Texte intégralWoodford, J. B., et G. R. Fenske. Fabrication of small-orifice fuel injectors for diesel engines. Office of Scientific and Technical Information (OSTI), avril 2005. http://dx.doi.org/10.2172/861615.
Texte intégralJohnson, R. N., et H. L. Hayden. Coal-fueled diesel technology development -- Fuel injection equipment for coal-fueled diesel engines. Office of Scientific and Technical Information (OSTI), janvier 1994. http://dx.doi.org/10.2172/10150057.
Texte intégralCaton, J. A., et K. D. Kihm. Characterization of coal-water slurry fuel sprays from diesel engine injectors. Office of Scientific and Technical Information (OSTI), juin 1993. http://dx.doi.org/10.2172/10104865.
Texte intégralSpencer Pack. An Innovative Injection and Mixing System for Diesel Fuel Reforming. Office of Scientific and Technical Information (OSTI), décembre 2007. http://dx.doi.org/10.2172/936087.
Texte intégralMurayama, Tetsuya, Hidenori Kosaka, Tetsuya Aizawa et Yukio Matsui. Control of Diesel Combustion Using Electronically Controlled Fuel Injection System. Warrendale, PA : SAE International, septembre 2005. http://dx.doi.org/10.4271/2005-08-0636.
Texte intégralTakezaki, Naoto, Yusuke Kinosita et Satoshi Kato. Influence of DME Addition Fuel on Direct Injection Diesel Engine Diesel Particulate Matter (PM) Generation. Warrendale, PA : SAE International, septembre 2005. http://dx.doi.org/10.4271/2005-08-0565.
Texte intégral