Littérature scientifique sur le sujet « Defects propagation »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Defects propagation ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Defects propagation"
Salim, M. N., M. N. M. Khairy et T. Hayashi. « Effect of Oval Defect on Propagation of Fundamental Lamb Wave ». Applied Mechanics and Materials 833 (avril 2016) : 49–58. http://dx.doi.org/10.4028/www.scientific.net/amm.833.49.
Texte intégralWang, Shang, Wei Qiang Wang, Ming Da Song et Hao Zhang. « The Fatigue and Fracture Analysis of Steam Turbine Rotor Shafts Containing Defects ». Key Engineering Materials 795 (mars 2019) : 254–61. http://dx.doi.org/10.4028/www.scientific.net/kem.795.254.
Texte intégralHuang, Yunqing, et Jichun Li. « Total Reflection and Cloaking by Triangular Defects Embedded in Zero Index Metamaterials ». Advances in Applied Mathematics and Mechanics 7, no 2 (23 mars 2015) : 135–44. http://dx.doi.org/10.4208/aamm.2014.m659.
Texte intégralYu, Shuisheng, Leilei Niu, Jin Chen, Yawei Wang et Honghao Yang. « Study on Bond Defect Detection in Grouted Rock Bolt Systems under Pullout Loads ». Advances in Materials Science and Engineering 2022 (31 août 2022) : 1–9. http://dx.doi.org/10.1155/2022/3282211.
Texte intégralBasmaci, Ayse. « The Behavior of Electromagnetic Wave Propagation in Photonic Crystals with or without a Defect ». Applied Computational Electromagnetics Society 36, no 6 (6 août 2021) : 632–41. http://dx.doi.org/10.47037/2020.aces.j.360603.
Texte intégralBultel, Yann, Corine BAS, Florence Dubelley, Fabrice Micoud, Sébastien Rosini et Christine Nayoze-Coynel. « Anode Defects’ Propagation in Polymer Electrolyte Membrane Fuel Cells Stack ». ECS Meeting Abstracts MA2023-02, no 38 (22 décembre 2023) : 1835. http://dx.doi.org/10.1149/ma2023-02381835mtgabs.
Texte intégralHuang, Chen, Zong-Xian Zhang, Adeyemi Aladejare, Xianbo Guan, Bingbing Yu et Liyun Yang. « The Effect of Preloaded Compressive Stress and Curvature of Defect on Blast-Induced Fracture Behavior by Caustic and Numerical Models ». Mathematics 11, no 21 (3 novembre 2023) : 4532. http://dx.doi.org/10.3390/math11214532.
Texte intégralCao, Andong, Zhen Zhang et Qian Li. « Frequency shifting of transmitted ultrasound in thick composites containing fiber wrinkles and its application in non-destructive evaluation ». Journal of the Acoustical Society of America 154, no 4_supplement (1 octobre 2023) : A246. http://dx.doi.org/10.1121/10.0023434.
Texte intégralYilmaz, Ayca, Dilek Helvacioglu-Yigit, Cansu Gur, Handan Ersev, Gullu Kiziltas Sendur, Egemen Avcu, Canan Baydemir et Paul Vincent Abbott. « Evaluation of Dentin Defect Formation during Retreatment with Hand and Rotary Instruments : A Micro-CT Study ». Scanning 2017 (2017) : 1–7. http://dx.doi.org/10.1155/2017/4868603.
Texte intégralXie, Mingjiang, Yifei Wang, Weinan Xiong, Jianli Zhao et Xianjun Pei. « A Crack Propagation Method for Pipelines with Interacting Corrosion and Crack Defects ». Sensors 22, no 3 (27 janvier 2022) : 986. http://dx.doi.org/10.3390/s22030986.
Texte intégralThèses sur le sujet "Defects propagation"
Soboyejo, Winston Oluwole. « The propagation of defects under fatigue loading ». Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.257906.
Texte intégralHussein, Salah A.-R. Ahmed. « Characterisation of planar defects in solids using ultrasonic pulse echo techniques ». Thesis, City University London, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389705.
Texte intégralMurat, B. I. S. « Propagation and scattering of guided waves in composite plates with defects ». Thesis, University College London (University of London), 2015. http://discovery.ucl.ac.uk/1469777/.
Texte intégralFoteinopoulou, Stavroula. « Electromagnetic Wave Propagation in Two-Dimensional Photonic Crystals ». Washington, D.C. : Oak Ridge, Tenn. : United States. Dept. of Energy. Office of Science ; distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2003. http://www.osti.gov/servlets/purl/822058-9BqHHS/native/.
Texte intégralPublished through the Information Bridge: DOE Scientific and Technical Information. "IS-T 2048" Stavroula Foteinopoulou. 12/12/2003. Report is also available in paper and microfiche from NTIS.
Oliveira, Vanessa Amaral de. « Influence of processing parameters on the generation and propagation of electrically active crystalline defects in monolike silicon ». Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAI021.
Texte intégralThe new generation of directionally solidified “monolike” Si ingots presents an attractive alternative to high-cost monocrystals for the manufacture of high performance solar cells with advanced architecture. However, local zones with high densities of dislocations still affect the overall solar cell efficiency.In the present work, the mechanisms of formation of dislocations structures during monolike growth and their influence on the electrical properties of the material were analyzed, and practical conclusions were drawn for the improvement of the process.Pilot scale crystal growth experiments were performed with varying parameters related to seed pavement and seed recycling, crystallographic orientation of the growth, and doping with a strengthening element (Ge). Complementary annealing and 4-point bending tests at high temperature were used to analyze the influence of stress level and time under stress.Advanced structural characterization of dislocations structures was performed by synchrotron X-ray imaging. Behind the growth front, dislocations organize in cellular patterns which correspond to a quasi-stationary creep stage, reached in the solid after long time under stress at high temperature. Dislocations that emerge at the growth front develop, from local sources, cone-shaped misoriented domains, which present increasing tilt around the growth axis and expand laterally as growth proceeds. Characterization by LBIC and Photoluminescence showed that these defects have the highest recombination activities. The sources of these defects located at the seed ingot interface can be suppressed by proper choice of seeds orientations and arrangement. However, another source is bunching of dislocations at the growth front under the higher stresses upper in the ingot.In <110> and <112> grown ingots, dislocation bunching was not observed inside the monocrystalline parts, which shows an advantage of these orientations over <100>. On another hand, twins and sub-grain boundaries propagated from higher angle grain boundaries with these growth directions, and further studies are needed to prevent the generation of such defects. Finally, Ge doping was effective to reduce dislocations multiplication in bending under low stresses. However, its application to crystal growth will require a planar growth interface, and forced melt mixing to avoid Ge radial segregation. New researches inspired by the addition of strengthening elements are now in development
Cini, Andrea. « Scribe marks at fuselage joints : initiation and propagation of fatigue cracks from mechanical defects in aluminium alloys ». Thesis, Cranfield University, 2012. http://dspace.lib.cranfield.ac.uk/handle/1826/7895.
Texte intégralEhrlacher, Virginie. « Quelques modèles mathématiques en chimie quantique et propagation d'incertitudes ». Thesis, Paris Est, 2012. http://www.theses.fr/2012PEST1073/document.
Texte intégralThe contributions of this thesis work are two fold. The first part deals with the study of local defects in crystalline materials. Chapter 1 gives a brief overview of the main models used in quantum chemistry for electronic structure calculations. In Chapter 2, an exact variational model for the description of local defects in a periodic crystal in the framework of the Thomas-Fermi-von Weisz"acker theory is presented. It is justified by means of thermodynamic limit arguments. In particular, it is proved that the defects modeled within this theory are necessarily neutrally charged. Chapters 3 and 4 are concerned with the so-called spectral pollution phenomenon. Indeed, when an operator is discretized, spurious eigenvalues which do not belong to the spectrum of the initial operator may appear. In Chapter 3, we prove that standard Galerkin methods with finite elements discretization for the approximation of perturbed periodic Schrödinger operators are prone to spectral pollution. Besides, the eigenvectors associated with spurious eigenvalues can be characterized as surface states. It is possible to circumvent this problem by using augmented finite element spaces, constructed with the Wannier functions of the periodic unperturbed Schr"odinger operator. We also prove that the supercell method, which consists in imposing periodic boundary conditions on a large simulation domain containing the defect, does not produce spectral pollution. In Chapter 4, we give a priori error estimates for the supercell method. It is proved in particular that the rate of convergence of the method scales exponentiall with respect to the size of the supercell. The second part of this thesis is devoted to the study of greedy algorithms for the resolution of high-dimensional uncertainty quantification problems. Chapter 5 presents the most classical numerical methods used in the field of uncertainty quantification and an introduction to greedy algorithms. In Chapter 6, we prove that these algorithms can be applied to the minimization of strongly convex nonlinear energy functionals and that their convergence rate is exponential in the finite-dimensional case. We illustrate these results on obstacle problems with uncertainty via penalized formulations
Aïssani, Amina. « Optimisation fiabiliste des performances énergétiques des bâtiments ». Thesis, Clermont-Ferrand 2, 2016. http://www.theses.fr/2016CLF22677/document.
Texte intégralIn the context of growing world energy demand and environmental degradation, many actions are undertaken each year to improve the energy performance of buildings. During the design stage, the use of building energy simulations remains a valuable tool as it evaluates the possible options in terms of energy performance and comfort. However, as precision requirements increase, it becomes essential to assess the uncertainties associated with input data in simulation. This thesis focuses on the insulation design process under uncertainty, in order to limit gaps between real and predicted performance for better control of energy consumptions. This work firstly presents the current alarming energy context. We consider the main uncertainties that affect the insulation, mainly the variability of the thermophysical properties, the uncertainty on climate and the uncertainties due to workmanship defects. Experimental studies were carried out to evaluate the uncertainty associated to the intrinsic performance of healthy insulation materials on one hand, and those associated to defects in insulations on the other hand. A coupling between thermography techniques and finite element models was used to provide analytical models that assess the effective thermal performance of a defective insulation, according to the type and size of the defect. As the performance of insulation also depends on climate, it is necessary to integrate future weather data to evaluate the energy consumption. These weather data are generally estimated based on the historical climatic data of the region. However, it is still difficult to predict climate change as it depends on many uncontrollable factors. In this work, we consider the different climate scenarios proposed by climate expert groups, and the uncertainty associated to each scenario to evaluate the reliability of the insulation and to improve the decision making process. Finally, we propose a probabilistic approach to integrate uncertainties in simulation and an optimization methodology based on reliability. A new cost formulation is also proposed to improve the decision-making, through indirect losses related to comfort, pollution and living space losses
Masmoudi, Mohamed. « Modélisation de la propagation d'ondes guidées, générées et détectées par transducteurs ultrasonores à couplage air : Application au CND de structures aéronautiques composites ». Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14483/document.
Texte intégralNon-destructive testing (NDT) using guided waves generated and detected by air-coupled ultrasonic transducers have two main advantages. First, this non-contact technique without coupled medium allows obvious convenience of use. Moreover, the ability of guided waves to carry information about medium quality over long distance. In this context, a numerical model has been developed, which takes into account many parameters of the control system. In order to reduce the number of degrees of freedom, a hybrid model has been developed which consists of a combination between an analytical model, based on the Kirchhoff integral for the propagation of ultrasound in air and a finite element model for the propagation of guided waves in the material. The measured characteristics (efficiency and sensitivity) of two air-coupled transducers allow the prediction of the accurate values of the pressure of bulk waves generated in air and the measurement of the pressure of the radiated field in air by guided waves propagating in a structure. This process enables the comparison between predicted and measured guided waves modes. Based on the hybrid model, an optimization of the parameters of the control system (angle, frequency, diameter, direction of propagation, near and far field) was performed to improve the purity of guided modes along the material plate. To validate some numerical predictions, an aircoupled ultrasonic transducer is used and oriented at a specific angle chosen for generating one specific Lambmode guided along a composite plate sample, and a laser probe measures the normal velocity at different locations on the surface of the plate. Then, the interaction of ultrasonic guided waves with delamination in acomposite plate was studied. In particular, the sensitivity of the two fundamental modes A0 and S0 was analyzed in order to predict the detectability of the defect. In parallel, the inverse problem is solved and the defect size is quantified by calculating the spectrum of the reflection coefficient. Finally, the potential of air-coupled transducers to examine an aircraft structure, has been demonstrated
Touhami, Salah. « Apparition, détection et propagation des défauts à l'anode des piles à combustible à membrane échangeuse de protons ». Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0151.
Texte intégralDefects known to shorten the lifetime of polymer electrolyte membrane fuel cells (PEMFC) can appear on different membrane electrode assembly (MEA) components and under different forms due to manufacturing processes or operational aging of the fuel cell. This work concerns the occurrence, detection, and propagation of defects in PEMFC MEA, and more specifically at the anode. To this end, an accelerated stress test (AST) combining potential and humidity cycles -induced by load variations-, and open-circuit hold is applied to standard MEA, and to MEA with initial defects. Those customized MEA were intentionally prepared with a lack of active layer at the anode, the defect being located either near the hydrogen inlet or near the hydrogen outlet. Periodic electrochemical characterizations were carried out using a segmented instrumented linear cell, allowing to monitor the cell performance through the currents, electrode potentials, and local impedance, as well as the evolution of the electrochemical active surface (ECSA) at the anode and cathode during the ageing test, with a spatial resolution along the channels. An electrochemical impedance spectroscopy study was conducted jointly, using equivalent electrical circuits, and focusing on the detection of the anodic contribution to the global impedance of the cell. Results showed an accelerated degradation of the MEA and the first evidence of defect propagation, in terms of loss of ECSA at the anode. This propagation occurred in the direction of the hydrogen flow. The ECSA at the cathode also appeared to be impacted, although apparently homogeneously. Significant membrane thinning was also observed in the defective segments, with probable propagation to adjacent segments, but over a longer time period
Livres sur le sujet "Defects propagation"
D, Noebe R., et United States. National Aeronautics and Space Administration., dir. Low cycle fatigue behavior of polycrystalline NiAl at 300 and 1000K. [Washington, DC] : National Aeronautics and Space Administration, 1993.
Trouver le texte intégralD, Noebe Ronald, et United States. National Aeronautics and Space Administration., dir. Low cycle fatigue behavior of polycrystalline NiAl at 300 and 1000K. [Washington, DC] : National Aeronautics and Space Administration, 1993.
Trouver le texte intégralUnited States. National Aeronautics and Space Administration., dir. Prediction and verification of ductile crack growth from simulated defects in strength overmatched butt welds : A thesis ... [Washington, D.C : National Aeronautics and Space Administration, 1997.
Trouver le texte intégralO, Harris David, Thomas Jerrell M, George C. Marshall Space Flight Center. et United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., dir. A review of fracture mechanics life technology. [Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.
Trouver le texte intégralNazer, Hisham. Power of a Third Kind. Praeger, 1999. http://dx.doi.org/10.5040/9798400699740.
Texte intégralChapitres de livres sur le sujet "Defects propagation"
Harris, John G. « Modeling Scanned Acoustic Imaging of Defects at Solid Interfaces ». Dans Inverse Problems in Wave Propagation, 237–57. New York, NY : Springer New York, 1997. http://dx.doi.org/10.1007/978-1-4612-1878-4_11.
Texte intégralChang, Zensheu, et Ajit Mal. « Wave Propagation in a Plate with Defects ». Dans Review of Progress in Quantitative Nondestructive Evaluation, 121–28. Boston, MA : Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5339-7_15.
Texte intégralAbdollahi, Amir, et Irene Arias. « Numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals ». Dans Micromechanics of Defects in Solids, 3–15. Dordrecht : Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4626-8_2.
Texte intégralKlapper, Helmut. « Generation and Propagation of Defects During Crystal Growth ». Dans Springer Handbook of Crystal Growth, 93–132. Berlin, Heidelberg : Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-74761-1_4.
Texte intégralWeidner, Anja, Alexander Schmiedel, Mikhail Seleznev et Horst Biermann. « Influence of Internal Defects on the Fatigue Life of Steel and Aluminum Alloys in the VHCF Range ». Dans Multifunctional Ceramic Filter Systems for Metal Melt Filtration, 605–43. Cham : Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_24.
Texte intégralXu, Liu-Jun, et Ji-Ping Huang. « Theory for Thermal Edge States : Graphene-Like Convective Lattice ». Dans Transformation Thermotics and Extended Theories, 305–15. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5908-0_22.
Texte intégralNasedkina, A. A., A. Alexiev et J. Malachowski. « Numerical Simulation of Ultrasonic Torsional Guided Wave Propagation for Pipes with Defects ». Dans Springer Proceedings in Physics, 475–88. Cham : Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-26324-3_33.
Texte intégralYang, W., et T. Kundu. « Lamb Wave Propagation in Multilayered Anisotropic Solids and its Application Towards Imaging Material Defects ». Dans Acoustical Imaging, 23–30. Boston, MA : Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1943-0_3.
Texte intégralZotov, Vladimir V., Vitaly V. Popuzin et Alexander E. Tarasov. « An Experimental Model of the Ultrasonic Wave Propagation Through a Doubly-Periodic Array of Defects ». Dans Advanced Structured Materials, 189–204. Singapore : Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3797-9_11.
Texte intégralMieloszyk, Eligiusz, Anita Milewska et Sławomir Grulkowski. « Assessment of Image Processing Methods for the Determination of Propagation of Squat-Type Defects in Rails ». Dans Lecture Notes in Electrical Engineering, 211–19. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-11187-8_17.
Texte intégralActes de conférences sur le sujet "Defects propagation"
ZIELIŃSKI, P. « PROPAGATION OF WAVES THROUGH ANHARMONIC DEFECTS ». Dans Proceedings of the 7th International School on Theoretical Physics. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812704474_0040.
Texte intégralSargent, R. B., Dar-Yuan Song et H. Angus Macleod. « Computer simulation of defect propagation in thin films ». Dans OSA Annual Meeting. Washington, D.C. : Optica Publishing Group, 1986. http://dx.doi.org/10.1364/oam.1986.tur2.
Texte intégral« 3D WAVE PROPAGATION IN MATERIALS WITH FRICTIONAL DEFECTS ». Dans Fizicheskaya mezomekhanika. Materialy s mnogourovnevoy ierarkhicheski organizovannoy strukturoy i intellektual'nye proizvodstvennye tekhnologii. Tomsk State University, 2020. http://dx.doi.org/10.17223/9785946219242/134.
Texte intégralKim, Kukbin, Byung-Joo Kim, Jinsoo Park, Young-Cheol Yoon et Deukjin Park. « Fatigue Strength Evaluation of Defects Embedded in Large-Sized Stud Bolt of Marine Engine ». Dans ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82663.
Texte intégralFeroz, K. T., et S. O. Oyadiji. « Damage Detection in Rods Using Wave Propagation and Regression Analysis ». Dans ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/vib-8372.
Texte intégralKakoyiannis, Constantine G., Evangelos S. Angelopoulos et Philip Constantinou. « Radiation properties of wireless-sensor-targeted compact arrays loaded by ground defects ». Dans Propagation Conference (LAPC). IEEE, 2009. http://dx.doi.org/10.1109/lapc.2009.5352374.
Texte intégralDas, Poulomi, Alain Moussa, Christophe Beral, Mihir Gupta, Mohamed Saib, Sandip Halder, Anne-Laure Charley et Philippe Leray. « Printability and propagation of stochastic defects through a study of defects programmed on EUV mask ». Dans International Conference on Extreme Ultraviolet Lithography 2021, sous la direction de Kurt G. Ronse, Paolo A. Gargini, Eric Hendrickx, Patrick P. Naulleau et Toshiro Itani. SPIE, 2021. http://dx.doi.org/10.1117/12.2602034.
Texte intégralFavalli, M., et C. Metra. « Pulse propagation for the detection of small delay defects ». Dans Design, Automation & Test in Europe Conference. IEEE, 2007. http://dx.doi.org/10.1109/date.2007.364476.
Texte intégralWang, Donghui, Qingna Zeng, Fenggang Zang et Yixiong Zhang. « Vibration Propagation Analysis of Periodic Pipeline With Crack Defects ». Dans ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-60988.
Texte intégralFan, Y., S. Dixon, R. S. Edwards et X. Jian. « Ultrasonic Surface Wave Propagation and Interaction with Surface Defects ». Dans REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION. AIP, 2007. http://dx.doi.org/10.1063/1.2718063.
Texte intégralRapports d'organisations sur le sujet "Defects propagation"
Leis, B. N. Leis, et R. J. Eiber. PR-003-00108-R01 Fracture Control Technology for Natural Gas Pipelines Circa 2001. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), juillet 2001. http://dx.doi.org/10.55274/r0011879.
Texte intégralMcKinley, W. G., H. T. Yura et S. G. Hanson. Optical System Defect Propagation in ABCD Systems. Fort Belvoir, VA : Defense Technical Information Center, octobre 1988. http://dx.doi.org/10.21236/ada200480.
Texte intégralRose, Luo et Minachi. ZZ44154 Circumferential Guided Waves for Defect Detection in Tar Coated Pipe. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), janvier 2008. http://dx.doi.org/10.55274/r0010958.
Texte intégralNestleroth. L52298 Augmenting MFL Tools With Sensors that Assess Coating Condition. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), mars 2009. http://dx.doi.org/10.55274/r0010396.
Texte intégralArnold, Joshua. DTPH56-16-T-00004 EMAT Guided Wave Technology for Inline Inspections of Unpiggable Natural Gas Pipelines. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), septembre 2018. http://dx.doi.org/10.55274/r0012048.
Texte intégralDawalibi. L51925 Detection of Anomalies in Coated Pipelines Using Long Range Ultrasonics. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), octobre 2002. http://dx.doi.org/10.55274/r0010644.
Texte intégralRose et Luo. L52069 Guided Wave Sizing and Discrimination for SCC Magnetostriction ILI Inspection. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), janvier 2003. http://dx.doi.org/10.55274/r0011179.
Texte intégralEngel, Bernard, Yael Edan, James Simon, Hanoch Pasternak et Shimon Edelman. Neural Networks for Quality Sorting of Agricultural Produce. United States Department of Agriculture, juillet 1996. http://dx.doi.org/10.32747/1996.7613033.bard.
Texte intégralL51742 Serviceability of Corroded Girth Welds. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), mai 1996. http://dx.doi.org/10.55274/r0010362.
Texte intégralTHE CRACK DETECTION METHOD OF LONGITUDINAL RIB BUTT WELD OF STEEL BRIDGE BASED ON ULTRASONIC LAMB WAVE. The Hong Kong Institute of Steel Construction, août 2022. http://dx.doi.org/10.18057/icass2020.p.265.
Texte intégral