Littérature scientifique sur le sujet « Cu-based alloy »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Cu-based alloy ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Cu-based alloy"
Suprapto, Wahyono, Zuliantoni, Putu Hadi Setyarini, Femiana Gapsari, Sudjito et Yudy Surya Irawan. « Corrosion Resistance Analysis of Al-Cu, Al-Zn and Al-Cu-Zn Alloys ». Key Engineering Materials 935 (30 novembre 2022) : 33–40. http://dx.doi.org/10.4028/p-04p5jx.
Texte intégralLiu, Dong Mei, Qiang Song Wang, Wei Yuan et Xu Jun Mi. « A Comparative Study on the Friction and Wear Properties of Three Different Copper Alloys ». Materials Science Forum 913 (février 2018) : 205–11. http://dx.doi.org/10.4028/www.scientific.net/msf.913.205.
Texte intégralCao, Peng Jun, Ji Ling Dong et Hai Dong Wu. « Research on Cu-Based Bulk Glassy Alloys and its Mechanical Properties ». Applied Mechanics and Materials 329 (juin 2013) : 127–32. http://dx.doi.org/10.4028/www.scientific.net/amm.329.127.
Texte intégralCai, An-hui, Xiang Xiong, Yong Liu, Yong Zhou, Wei-ke An et Yun Luo. « Regular Cu-based amorphous alloy powder ». Journal of Alloys and Compounds 497, no 1-2 (mai 2010) : 234–38. http://dx.doi.org/10.1016/j.jallcom.2010.03.018.
Texte intégralCao, Peng Jun, Ji Ling Dong, Hai Dong Wu et Pei Geng Fan. « Preparation and Corrosion Resistance of Cu-Based Bulk Glassy Alloys ». Advanced Materials Research 652-654 (janvier 2013) : 1143–48. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.1143.
Texte intégralXie, Ming Yu, Si Hai Ao et Xiang Wang. « Effect of Al5Ti1B Master Alloy on Microstructure and Mechanical Properties of Al-5wt.%Cu based Alloy ». Advanced Materials Research 1051 (octobre 2014) : 195–98. http://dx.doi.org/10.4028/www.scientific.net/amr.1051.195.
Texte intégralLi, Min, Lan Rong Cai et Peng Xin Liu. « The Effect of Y on Microstructure and Properties of Al-5wt.%Cu Based Alloy ». Key Engineering Materials 522 (août 2012) : 227–30. http://dx.doi.org/10.4028/www.scientific.net/kem.522.227.
Texte intégralSun, Yuqing, Gaolei Xu, Xue Feng, Lijun Peng, Guojie Huang, Haofeng Xie, Xujun Mi et Xinhua Liu. « Effect of Ag on Properties, Microstructure, and Thermostability of Cu–Cr Alloy ». Materials 13, no 23 (27 novembre 2020) : 5386. http://dx.doi.org/10.3390/ma13235386.
Texte intégralNiemi, L., E. Minni et A. Ivaska. « An Electrochemical and Multispectroscopic Study of Corrosion of Ag-Pd-Cu-Au Alloys ». Journal of Dental Research 65, no 6 (juin 1986) : 888–91. http://dx.doi.org/10.1177/00220345860650060401.
Texte intégralKaneko, Daisuke, Mahoto Takeda, Takanari Nakajima et Naokuni Muramatsu. « The Influence of Alloy Composition and Heat-Treatments on the Shape Memory Properties in a Cu-Sn-X Alloy ». Materials Science Forum 941 (décembre 2018) : 1282–87. http://dx.doi.org/10.4028/www.scientific.net/msf.941.1282.
Texte intégralThèses sur le sujet "Cu-based alloy"
Howard, P. « Precipitation and creep in an Al-Zn-Mg-Cu based alloy ». Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356709.
Texte intégralVargas, Ignacio Alejandro Figueroa. « Processing, structures and properties of some bulk cu-based alloy glasses ». Thesis, University of Sheffield, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.489379.
Texte intégralSzablinski, Eric (Eric Allen). « Systematic study of the Taylor method for production of cu-based shape memory alloy microwires : a master's thesis ». Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/79564.
Texte intégralCataloged from PDF version of thesis.
Includes bibliographical references (p. 39-40).
The Taylor method is a proven way to produce Cu-based shape memory microwires that aren't plagued by problems typical in polycrystalline copper SMAs produced by other methods. Here we set out to expand and refine this processing method to take the first critical steps toward large-scale continuous production. Using a semi-automated processing route, we draw continuous, uniform fibers up to 5 meters in length with diameters in the range 10 - 35 microns. Particular attention is paid to microwires made from a Cu-Sn shape memory alloy. In addition, because the properties of shape memory microwires depend on their diameter, processing parameters were varied to understand their impact on the diameters of the resulting wires.
by Eric Szablinski.
S.M.
Arslan, Hulya. « Synthesis And Characterization Of Nickel Based Bulk Amorphous Alloys ». Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/3/12605099/index.pdf.
Texte intégralAbid, Fatma. « Contribution à la robustesse et à l'optimisation fiabiliste des structures Uncertainty of shape memory alloy micro-actuator using generalized polynomial chaos methodUncertainty of shape memory alloy micro-actuator using generalized polynomial chaos method Numerical modeling of shape memory alloy problem in presence of perturbation : application to Cu-Al-Zn-Mn specimen An approach for the reliability-based design optimization of shape memory alloy structure Surrogate models for uncertainty analysis of micro-actuator ». Thesis, Normandie, 2019. http://www.theses.fr/2019NORMIR24.
Texte intégralThe design of economic system leads to many advances in the fields of modeling and optimization, allowing the analysis of structures more and more complex. However, optimized designs can suffer from uncertain parameters that may not meet certain reliability criteria. To ensure the proper functioning of the structure, it is important to consider uncertainty study is called the reliability analysis. The integration of reliability analysis in optimization problems is a new discipline introducing reliability criteria in the search for the optimal configuration of structures, this is the domain of reliability optimization (RBDO). This RBDO methodology aims to consider the propagation of uncertainties in the mechanical performance by relying on a probabilistic modeling of input parameter fluctuations. In this context, this thesis focuses on a robust analysis and a reliability optimization of complex mechanical problems. It is important to consider the uncertain parameters of the system to ensure a robust design. The objective of the RBDO method is to design a structure in order to establish a good compromise between the cost and the reliability assurance. As a result, several methods, such as the hybrid method and the optimum safety factor method, have been developed to achieve this goal. To address the complexity of complex mechanical problems with uncertain parameters, methodologies specific to this issue, such as meta-modeling methods, have been developed to build a mechanical substitution model, which at the same time satisfies the efficiency and the precision of the model
Xie, Chenyang. « Corrosion studies on Cu-based alloys ». Doctoral thesis, Universitat Politècnica de Catalunya, 2021. http://hdl.handle.net/10803/671526.
Texte intégralEls aliatges de coure es fan servir freqüentment en entorns corrosius. La millora de la resistència a la corrosió reduiria notablement el consum d’energia i la sobreexplotació de recursos naturals. Nou derivats de l’imidazol amb diferents grups funcionals ha estat analitzats com a potencials inhibidors de la corrosió, per tal d’augmentar la resistència a la corrosió del Cu. S’escolliren derivats de l’imidazol a la vista de la seva resposta diferent com a inhibidors de la corrosió en Cu pur. Aquest inhibidors han estat aplicats sobre els metalls purs i sobre aliatges CuZn i CuZr cristal·lines i amorfes, per tal d’explorar les correlacions entre inhibició, estructura i espècies atòmiques. La determinació de l’eficiència d’inhibició en metalls és un problema complex a causa de la influència creuada entre les condicions a la superfície, la interacció inhibidor-superfície i les condicions ambientals. En aliatges CuZn s'han estudiat les composicions Cu70Zn30 (fase a-Cu) i Cu30Zn70 (fase no-a-Cu). Els aliatges CuZr són la base d'una família de vidres metàl·lics amb gran capacitat d’amortització i excel·lents propietats mecàniques. S'ha determinat la resistència a la corrosió d'aliatges cristal·lins i amorfs de composició CuxZr (100-x) (x = 40, 50, 64 at.%). Tots els aliatges van ser analitzades en dissolució aquosa contenint un 3% de NaCl en pes, sense i amb una concentració de 1mM de l'inhibidor. S'han efectuat mesures dinàmiques de polarització, espectroscòpia d'impedància electroquímica i immersió durant períodes prolongats seguida de microscòpia i espectroscòpia Raman. L'anàlisi comparativa mostra que els inhibidors efectius en Cu pur ho són també en Cu70Zn30. Un comportament similar apareix entre Zn i Cu30Zn70. No obstant això, el poder d'inhibició mostra un valor molt diferent, que s'atribueix a l'efecte de "cicatrització". Els defectes presents en la majoria de les mostres acceleren la corrosió localitzada (pitting) en aquests punts. L'efecte de cicatrització produeix "pegats" en les mateixes posicions, el que redueix la velocitat de l'atac localment. Els aliatges CuZr cristal·lins mostren una resistència a la corrosió molt més alta que els aliatges cristal·lins amb la mateixa composició, originalment i en presència d'inhibidors. El principal factor que controla la resistència a la corrosió dels aliatges és l'alta concentració de Zr (al menys equiatòmica) en l'estructura amorfa; l'efecte dels inhibidors resulta ser secundari. Els resultats mostren una relació complexa entre l'eficiència de l'inhibidor, la microestructura i la composició dels aliatges CuZr. SH-ImiH-4Ph mostra potencial per inhibir la corrosió en aliatges on la fase dominant és a-Cu, mentre que SH-BimH-5NH2 mostra potencial com a inhibidor en aliatges on el Zn és majoritari i en aliatges CuZr. Les mesures electroquímiques, especialment de llarga durada, mostren una bona correlació amb les anàlisis d'immersió. La recerca realitzada ofereix elements de comprensió del mecanisme de corrosió en presència d'inhibidors. L'oxidació pre-existent de la superfície, els defectes en la superfície i el grup funcional de l'inhibidor són els factors dominants en l'efectivitat dels inhibidors. L'efecte de cicatrització afecta també notablement el rendiment d'alguns inhibidors.
Heil, Joseph Patrick. « Damping and microstructures in aged Cu-Mn based alloys ». Thesis, Monterey, California. Naval Postgraduate School, 1988. http://hdl.handle.net/10945/23000.
Texte intégralHolsten, Guy Victor. « Phase transformations and microstructural evolution in aged Mn-Cu-based alloys ». Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA232473.
Texte intégralThesis Advisor(s): Perkins, Jeff. "June 1990." Description based on title screen as viewed on March 22, 2010. DTIC Identifier(s): Alloys, Spinodal Decomposition, Flickering, Damping. Author(s) subject terms: High Damping Alloys, Spinodal Decomposition, Cu-Mn alloys, Flickering. Includes bibliographical references (p. 85-92). Also available in print.
Pauly, Simon. « Phase formation and mechanical properties of metastable Cu-Zr-based alloys ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-39545.
Texte intégralLiu, Dan. « Thixoforming of high performance alloys mainly based on the Al-Cu system ». Thesis, University of Sheffield, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.401159.
Texte intégralLivres sur le sujet "Cu-based alloy"
Heil, Joseph Patrick. Damping and microstructures in aged Cu-Mn based alloys. Monterey, California : Naval Postgraduate School, 1988.
Trouver le texte intégralCronauer, Joseph T. A comparison of high damping shape memory alloys with Cu-Mn-based and Fe-Cr-based alloys. 1987.
Trouver le texte intégralSkiba, Grzegorz. Fizjologiczne, żywieniowe i genetyczne uwarunkowania właściwości kości rosnących świń. The Kielanowski Institute of Animal Physiology and Nutrition, Polish Academy of Sciences, 2020. http://dx.doi.org/10.22358/mono_gs_2020.
Texte intégralChapitres de livres sur le sujet "Cu-based alloy"
Wang, Xin Hong, Zeng Da Zou, Min Zhang, Si Li Song et Shi Yao Qu. « Bonding Strength and Microstructure of Cermet/Cu-Based Alloy Composite Brazed Coatings ». Dans Key Engineering Materials, 154–59. Stafa : Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.154.
Texte intégralNakashima, Kunihiko, Katsumi Mori et A. M. Glaeser. « Wettability of Cu-Based Alloys on Alumina and Joining of Alumina with Microdesigned Nickel-Chromium Alloy Interlayer ». Dans Ceramic Microstructures, 407–14. Boston, MA : Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5393-9_39.
Texte intégralHu, Helong, Haibin Li, Wenjun Yu, Yongzhen Jiao, Tingyi Dong et Baoguo Lv. « Process Optimization Design of High-Strength Ag–Cu–Ni Alloy Based on Orthogonal Experiments ». Dans Springer Proceedings in Physics, 183–90. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-5944-6_18.
Texte intégralAmirkhanlou, Sajjad, Yijie Zhang, Shouxun Ji et Zhongyun Fan. « Young’s Modulus of Al–Si–Mg–Cu Based Alloy Under Different Heat Treatment Processes ». Dans Light Metals 2017, 335–42. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51541-0_44.
Texte intégralGu, D. D., et Y. F. Shen. « Selective Laser Sintering of Multi-Component Cu-Based Alloy for Creating Three-Dimensional Metal Parts ». Dans Advances in Machining & ; Manufacturing Technology VIII, 344–47. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-999-7.344.
Texte intégralIndriyati, Martha, Vit Janik et Richard J. Dashwood. « Elevated Temperature Deformation Behavior of High Strength Al-Cu-Mg-Ag Based Alloy Reinforced by TiB2Particles ». Dans Light Metals 2014, 1353–58. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118888438.ch226.
Texte intégralIndriyati, Martha, Vit Janik et Richard J. Dashwood. « Elevated Temperature Deformation Behavior of High Strength Al-Cu-Mg-Ag Based Alloy Reinforced By TiB2 Particles ». Dans Light Metals 2014, 1353–58. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48144-9_226.
Texte intégralWang, Rongyue, Zhang FuYuan et Yuhui Hao. « Effects of Bi on the Interface Layer Between Sn-Based Alloy and Cu Substrate Under Microgravity Conditions ». Dans TMS 2020 149th Annual Meeting & ; Exhibition Supplemental Proceedings, 1753–59. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36296-6_162.
Texte intégralLee, Dong Suk, Taek Kyun Jung, Mok Soon Kim et Won Yong Kim. « Effect of Cu and Mg on Forging Property and Mechanical Behavior of Powder Forged Al-Si-Fe Based Alloy ». Dans Progress in Powder Metallurgy, 389–92. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.389.
Texte intégralda Costa Teixeira, Julien, Laure Bourgeois et Christopher R. Hutchinson. « A Study of the Microstructural Evolution and Strengthening Effects of Non-Spherical Precipitates in an Al-Cu-Based Alloy ». Dans Materials Science Forum, 2317–20. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.2317.
Texte intégralActes de conférences sur le sujet "Cu-based alloy"
Ong, Cheng-Guan, Kok-Tee Lau, Muhammad Zaimi, Kim-Swee Goh et Mei-Qi Tay. « Effect of Cu based complexes on EFTECH 64 and C194 Cu alloy ». Dans 2016 IEEE 37th International Electronics Manufacturing Technology (IEMT) & 18th Electronics Materials and Packaging (EMAP) Conference. IEEE, 2016. http://dx.doi.org/10.1109/iemt.2016.7761982.
Texte intégralDawson, Mansoor Idrees, Samia Batool et Raheel Nadeem. « Development of Cu-Zn-Al based shape memory alloy ». Dans 2017 Fifth International Conference on Aerospace Science & Engineering (ICASE). IEEE, 2017. http://dx.doi.org/10.1109/icase.2017.8374258.
Texte intégralKoneva, N. A., L. I. Trishkina et T. V. Cherkasova. « Defect distribution in deformed grains of Cu-based alloy polycrystals ». Dans PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2017 (AMHS’17). Author(s), 2017. http://dx.doi.org/10.1063/1.5013770.
Texte intégralHe, Huang, Shangyu Huang et Yong Xiao. « Cu interconnects soldered with a novel Sn-based composite solder reinforced by Ni-Cu alloy foam ». Dans 2020 21st International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2020. http://dx.doi.org/10.1109/icept50128.2020.9202641.
Texte intégralKrancher, Christian, Benjamin Schelnberger, Fabian Hoffmann, Romina Krieg, Ralf Theiß et Peter Dültgen. « Investigation of Transformation Temperatures, Microstructure, and Deformation Behavior of a Pseudoelastic Cu-Based Shape Memory Alloy ». Dans ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/smasis2022-90933.
Texte intégralNam, Duk-Hyun, Chang-Young Son, Chang Kyu Kim et Sunghak Lee. « Mechanical Properties of Cu-Based Amorphous Alloy Matrix Composites Consolidated by Spark Plasma Sintering ». Dans ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials International Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/mn2008-47048.
Texte intégralMa, Hong, Peihao Geng et Guoliang Qin. « Effect of Alloying Elements of Al Alloy on the Interfacial Microstructure and Fracture Behaviour of Al Alloy/Steel Inertia Friction Welded Joint : A Comparative Study ». Dans ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-85196.
Texte intégralLilin Liu, Ran Fu, Deming Liu et Tong-Yi Zhang. « Cu out-diffusion kinetics in pre-plated Cu-alloy leadframes investigated by a developed EDX-based oxidation test ». Dans 2008 International Conference on Electronic Packaging Technology & ; High Density Packaging (ICEPT-HDP). IEEE, 2008. http://dx.doi.org/10.1109/icept.2008.4607081.
Texte intégralWada, Kentaro, Junichiro Yamabe, Yuhei Ogawa, Osamu Takakuwa, Takashi Iijima et Hisao Matsunaga. « Fracture and Deformation Behavior in Slow-Strain-Rate Tensile Testing of Cu–Ni Alloy With Internal Hydrogen ». Dans ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93477.
Texte intégralKaraduman, O., İ. Özkul, S. Altın, E. Altın, Ö. Bağlayan et C. Aksu Canbay. « New Cu-Al based quaternary and quinary high temperature shape memory alloy composition systems ». Dans SolarPACES 2017 : International Conference on Concentrating Solar Power and Chemical Energy Systems. Author(s), 2018. http://dx.doi.org/10.1063/1.5078902.
Texte intégral