Thèses sur le sujet « Cryogenic electronic »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Cryogenic electronic ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.
Schalk, Martin. « Ultra-fast electronic pulse control at cryogenic temperatures ». Thesis, Université Grenoble Alpes (ComUE), 2019. http://www.theses.fr/2019GREAY061.
Texte intégralUltra-fast synchronization, pulse shaping, and efficient switching are at the heart of precise measurements. The aim of this thesis project is to bring ultra-fast electronic control to small nano-metric circuits cooled down to mK temperatures. The fast quantum operation will bring the field of quantum-electronic optics closer to its photoniccounterpart with applications for fast and efficient electronic control in quantum devices. To this end, the experimental setups developed during the thesis project are described and tested in a way to outline also possible device integration for scalable solid-state quantum technology. As a first step, a Lorentzian-shaped voltage pulse with a full width half maximum Γ = (76 ± 2) ps is measured in a time-resolved manner at cryogenic temperatures. Secondly, the phase and amplitude drifts are analyzed and optimized together with the noise spectrum. A new pulse generation setup using a microwave frequency comb generator is then described and tested. Finally, a future realization of a quantum interference experiment by manipulating and detecting electronic pulses in a quantum conductor is described along with challenges for low-temperature quantum hardware and interconnects
Van, Niekerk Philip Charl. « A Cryogenic CMOS-based Control System for Testing Superconductor Electronics ». Thesis, Link to the online version, 2008. http://hdl.handle.net/10019/1338.
Texte intégralMARTINEZ, ROJAS ALEJANDRO DAVID. « Integrated cryogenic electronics to readout large areas SiPMs ». Doctoral thesis, Politecnico di Torino, 2021. http://hdl.handle.net/11583/2907032.
Texte intégralBadenhorst, Le Roux. « Cryogenic amplifiers for interfacing superconductive systems to room temperature electronics ». Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/1586.
Texte intégralThis thesis is aimed at testing commercially available CMOS amplifier ICs at 4 K. Super Conducting Electronics (SCE) will also be used to amplify RSFQ signals for easier detection by CMOS technology and better signal-to-noise ratios. The SCE comprises of a Suzuki stack amplifier, a 250 μA JTL and a DC-to-SFQ converter. The Suzuki stack amplifier is simulated in WRSPICE. It is able to amplify an SFQ signal synchronised with an external clock signal. The amplified signal can then be detected by a normal commercially available CMOS amplifier IC. To keep the noise in the signal to a minimum, the commercial amplifier must be be situated as close as possible to the SCE. The amplifier must therefore be able to operate at 4 K. Ten different amplifier ICs were tested and three was found that worked down to 4 K.
Langhammer, David. « On the chromogenic behavior of tungsten oxide films : A cryogenic experiment ». Thesis, Uppsala universitet, Institutionen för kemi - Ångström, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-263554.
Texte intégralSinthiptharakoon, K. « Investigation of individual donors in silicon at cryogenic temperature with atomic-scale resolution for atomic electronic devices ». Thesis, University College London (University of London), 2015. http://discovery.ucl.ac.uk/1460900/.
Texte intégralMüller, David [Verfasser], Otto [Akademischer Betreuer] Dopfer, Otto [Gutachter] Dopfer et Michael [Gutachter] Schmitt. « Electronic spectroscopy of flavins in a cryogenic 22 - pole ion trap / David Müller ; Gutachter : Otto Dopfer, Michael Schmitt ; Betreuer : Otto Dopfer ». Berlin : Technische Universität Berlin, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021092901572707449456.
Texte intégralRao, P. Sharath Chandra. « Analysis of fluid circulation in a spherical cryogenic storage tank and conjugate heat transfer in a circular microtube ». [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0000461.
Texte intégralReinke, Benjamin T. « Design, Characterization, and Simulation of a Cryogenic Irradiation Facility in the Ohio State University Research Reactor Pool ». The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1437746576.
Texte intégralConrad, Theodore Judson. « Miniaturized pulse tube refrigerators ». Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41108.
Texte intégralJego, Galahad. « TES résistif et électronique cryogénique de contre-réaction active associée ». Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS550.
Texte intégralSince a few years, CSNSM, Orsay, is capable of co-evaporating niobium and silicon into highly resistive TES (HRTES) meanders. This high impedance allows the use of transistors as readout electronics. The first stage of this electronics can be placed away from the thermometers reducing Joule power on the colder stage of the cryocooler. Also, multiplexing is greatly simplified. This manuscript aims to study the credibility of HRTES as high resolution microcalorimeters. A model of the HRTES and its active electrothermal feedback is resolved analytically and numerically. The parameters of this model are computed with experimental data. The numerical solving of the model is constantly compared to the thermal equilibrium and dynamic measured data. This comparison shows coherence between model and data. The analytical solving is used to compute a theoretical resolution and to optimize the detector. The resulting theoretical resolution does not conflict with Athena’s objective of less than 2.5 eV. It also shows that effects of the electrons/phonons decoupling are greatly reduced and that the HRTES can be stabilized at desired bias point. All of this work encourages further development efforts
Yang, Shaoyong. « Cryogenic characteristics of IGBTs ». Thesis, University of Birmingham, 2005. http://etheses.bham.ac.uk//id/eprint/896/.
Texte intégralConway, Lamb Ian. « Cryogenic Control Beyond 100 Qubits ». Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/17046.
Texte intégralRyan, Keith Patrick. « Rapid cryogenic fixation of biological specimens for electron microscopy ». Thesis, University of Plymouth, 1991. http://hdl.handle.net/10026.1/2504.
Texte intégralFletcher, A. L. « Cryogenic developments and signal amplification in environmental scanning electron microscopy ». Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.599080.
Texte intégralJia, Chunjiang. « Experimental investigation of semiconductor losses in cryogenic DC-DC converters ». Thesis, University of Birmingham, 2008. http://etheses.bham.ac.uk//id/eprint/161/.
Texte intégralHussen, Walid Yass. « Investigation of the thermal and magnetic properties of some Ce-based heavy electron systems ». Thesis, Loughborough University, 1990. https://dspace.lboro.ac.uk/2134/27939.
Texte intégralEl, Kass Abdallah. « Milli-Kelvin Electronics at the Quantum-Classical Interface ». Thesis, The University of Sydney, 2021. https://hdl.handle.net/2123/26889.
Texte intégralSmit, Albert Bart. « A new femtosecond electron diffractometer for structural dynamics experiments at cryogenic temperatures ». Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/96015.
Texte intégralENGLISH ABSTRACT: In this thesis, a femtosecond electron diffraction (FED) set-up that is capable of investigating the photo-induced switching of Cu(DCNQI)2 from being an insulator to being a conductor is presented. Movies of atomic structural changes with temporal resolution within the typical photo-switching transition timescales (sub-picoseconds) are obtainable with this set-up by employing a femtosecond laser. The experimental technique and the design of a crucial instrument of the machine, the electron gun, are extensively described and characterised both numerically and experimentally. The interest in observing atomic structural changes of Cu(DCNQI)2 in real time is because of the rich variety of the radical salts available that show alloy-specific Charge Density Wave (CDW) transitions. Valuable insights about the driving mechanisms behind these structural changes that are responsible for a change in conductivity are obtainable, as well as the relation between crystal alloys and their transition characteristics. Electron diffraction patterns of crystals in their metallic phase (room temperature) are shown in this thesis, but diffraction patterns of cryo-cooled Cu(DCNQI)2 in its insulating phase are still to be acquired. The temporal resolution of the atomic movie can be improved by recompression of electron pulses that are debunched due to Coulomb repulsion and electron energy spread within a pulse. Numerical and preliminary experimental results presented in this work expose the potential of a simple compression technique. In this way, more electrons in a single electron pulse can be afforded which allows to perform experiments at shorter integration time or lower repetition rate.
AFRIKAANSE OPSOMMING: In hierdie tesis word ’n femtosekonde elektron diffraksie opstelling aangebied wat daartoe in staat is om die foto-geïnduseerde omskakeling in Cu(DCNQI)2 van nie-geleier tot geleier te ondersoek. Deur gebruik te maak van ’n femtosekonde laser in hierdie opstelling, is ’rolprente’ van strukturele veranderinge op atoomskaal met ’n tyd resolusie beter as die tipiese foto-omskakelings tydskaal (sub-pikosekonde) verkrygbaar. Die eksperimentele tegniek en die ontwerp van ’n noodsaaklike instrument van die masjien, die elektron geweer, word breedvoerig beskryf en numeries en eksperimenteel gekenmerk. Die belangstelling om strukturele veranderinge in Cu(DCNQI)2 op atoom skaal in reële tyd waar te kan neem is as gevolg van die ryke verskeidenheid van radikale soute, wat allooispesifieke ladings digtheid golf (CDW) oorgange toon, wat beskikbaar is. Waardevolle insigte oor die meganismes wat hierdie strukturele veranderinge wat ’n verandering in geleiding veroorsaak dryf is verkrygbaar, sowel as die verwantskap tussen die kristal allooi en die oorgang kenmerke. Diffraksie patrone van kristalle in die metaalagtige fase (kamer temperatuur) word in hierdie tesis getoon, maar diffraksie patrone van cryo-verkoelde Cu(DCNQI)2 in die niegeleier fase moet nog verkry word. Die tyd resolusie van die atomiese rolprent kan verbeter word deur die elektron puls — wat deur Coulomb afstoting en elektron energie spreiding versprei is — weer saam te pers. Numeriese en voorlopige eksperimentele resultate toon die potensiaal van ’n eenvoudige kompressie tegniek. Hierdeur kan meer elektrone in ’n elektron puls gegun word en so die integrasie tyd of die herhalingstempo van die eksperimente verkort kan word.
Tosaka, Masatoshi. « STRUCTURAL STUDY ON POLYMER CRYSTALS BY CRYOGENIC HIGH-RESOLUTION TRANSMISSION ELECTRON MICROSCOPY ». Kyoto University, 2000. http://hdl.handle.net/2433/181349.
Texte intégralYuan, Jiahui. « SiGe HBTs Operating at Deep Cryogenic temperatures ». Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/14609.
Texte intégralAl-Taie, Haider. « Cryogenic on-chip multiplexer for the statistical study of quantum transport in low-dimensional devices ». Thesis, University of Cambridge, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.708580.
Texte intégralKUGATHASAN, RAMSHAN. « Low-Power Mixed-Signal ASIC for Cryogenic SiPM Readout ». Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2842523.
Texte intégralHodgdon, Travis K. « Cryogenic transmission electron microscopy as a probe of microstructural transitions in complex fluids ». Access to citation, abstract and download form provided by ProQuest Information and Learning Company ; downloadable PDF file, 343 p, 2008. http://proquest.umi.com/pqdweb?did=1691645631&sid=3&Fmt=2&clientId=8331&RQT=309&VName=PQD.
Texte intégralShornikov, Andrey [Verfasser], et Andreas [Akademischer Betreuer] Wolf. « An electron cooler for ultra-low energy cryogenic operation / Andrey Shornikov ; Betreuer : Andreas Wolf ». Heidelberg : Universitätsbibliothek Heidelberg, 2012. http://d-nb.info/1179785029/34.
Texte intégralThakur, Ram-Krishna. « Study of Escape of Electrons from the Surface of Liquid 4Helium and Other Cryogenic Substrates ». [S.l. : s.n.], 2006. http://nbn-resolving.de/urn:nbn:de:bsz:352-opus-37988.
Texte intégralDao, Nguyen Cong. « Characterisation and Modelling of Bulk CMOS Transistors over the 5 – 300 K Temperature Range ». Thesis, The University of Sydney, 2017. http://hdl.handle.net/2123/17591.
Texte intégralShen, Peter S. « The Characterization of Avian Polyomavirus, Satellite Tobacco Mosaic Virus, and Bacteriophage CW02 by Means of Cryogenic Electron Microscopy ». BYU ScholarsArchive, 2011. https://scholarsarchive.byu.edu/etd/3069.
Texte intégralColmenares, Juan. « Extreme Implementations of Wide-Bandgap Semiconductors in Power Electronics ». Doctoral thesis, KTH, Elkraftteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-192626.
Texte intégralQC 20160922
Yuan, Jiahui. « Cryogenic operation of silicon-germanium heterojunction bipolar transistors and its relation to scaling and optimization ». Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/33837.
Texte intégralVogel, Stephen [Verfasser], et Andreas [Akademischer Betreuer] Wolf. « Developments at an Electrostatic Cryogenic Storage Ring for Electron-Cooled keV Energy Ion Beams / Stephen Vogel ; Betreuer : Andreas Wolf ». Heidelberg : Universitätsbibliothek Heidelberg, 2016. http://d-nb.info/1180610571/34.
Texte intégralPaul, Daniel Roman [Verfasser], et Andreas [Akademischer Betreuer] Wolf. « Electron recombination studies of rotationally cold CH+ ions at the Cryogenic Storage Ring / Daniel Roman Paul ; Betreuer : Andreas Wolf ». Heidelberg : Universitätsbibliothek Heidelberg, 2021. http://d-nb.info/1238361943/34.
Texte intégralHornibrook, John Murray. « Readout and Control Beyond a Few Qubits : Scaling-up Solid State Quantum Systems ». Thesis, The University of Sydney, 2015. http://hdl.handle.net/2123/14448.
Texte intégralSaurabh, Sunny [Verfasser], et Andreas [Akademischer Betreuer] Wolf. « Collision studies with internally cold ion beams and merged electron beams in a cryogenic storage ring / Sunny Saurabh ; Betreuer : Andreas Wolf ». Heidelberg : Universitätsbibliothek Heidelberg, 2019. http://d-nb.info/1191758516/34.
Texte intégralBordin, Alberto. « Machinability of Ti6Al4V alloy produced by electron beam melting under different lubricating conditions ». Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3427109.
Texte intégralNell'ultimo decennio la crescente diffusione delle moderne tecnologie di formatura additiva da polvere metallica sta rivoluzionando i processi produttivi dei più avanzati settori manifatturieri. Oggigiorno, sempre più aziende operanti nel settore aeronautico e biomedicale stanno impiegando la tecnologia additiva denominata “Electron Beam Melting” per realizzare protesi ortopediche e componenti di motori aeronautici in lega di Ti6Al4V, tradizionalmente ottenuti per forgiatura e lavorazioni alle macchine utensili. Grazie a tale tecnologia, è possibile realizzare un componente di forma complessa, con proprietà geometriche e meccaniche taylorizzate, passando direttamente dal disegno al prodotto semi finito senza passaggi intermedi, abbattendo i costi di produzione. Tuttavia, lavorazioni alle macchine utensili di finitura sono tuttora necessarie per eliminare la porosità superficiale intrinseca a tale tecnologia e per ottenere una qualità superficiale e una precisione dimensionale non raggiungibili altrimenti. Al fine di ottimizzare la lavorazione meccanica e non indurre danneggiamenti superficiali al prodotto finito che ne inficiano la vita di servizio, è fondamentale conoscere la lavorabilità del materiale. Allo stato attuale, molti lavori di carattere scientifico e industriale sono stati condotti per migliorare la bassa lavorabilità della lega Ti6Al4V lavorata a caldo, grazie a una forte domanda dal settore aeronautico, ma non sono reperibili documenti e informazioni tecniche fruibili sul comportamento della lega prodotta per Electron Beam Melting, che manifesta differenti proprietà microstrutturali e meccaniche. Nel campo biomedicale, le protesi ortopediche in lega di Ti6Al4V sono lavorate alle macchine utensili applicando abbondante lubrificazione, realizzata con emulsioni di olio sintetico o vegetale e acqua. Al fine di rimuovere le sostanze tossico-inquinanti lasciate dalla lavorazione sui prodotti finiti, costose operazioni di lavaggio e sterilizzazione sono eseguite a fine processo. Nasce quindi l’esigenza di rivisitare le tradizionali strategie di lubrificazione impiegate nei processi di asportazione di truciolo in campo biomedicale, proponendo una soluzione che soddisfi dei requisiti tecnologici (bassa lavorabilità della lega), ambientali (fluido lubrificante non inquinante e tossico per l’uomo) ed economici (che riduca i costi di lavaggio e sterilizzazione). In questa tesi di dottorato, un sistema di lubrificazione criogenico è stato implementato per realizzare la tornitura della lega Ti6Al4V EBM, come alternativa da applicarsi in campo biomedicale. La lavorabilità della lega è stata investigata mediante un approccio sperimentale, valutando gli effetti di tre regimi di lubrificazione: a secco, lubrificante standard e mediante azoto liquido; e dei parametri di taglio, valutando l’usura dell’utensile, l’integrità superficiale e la morfologia del truciolo. In seguito un modello numerico agli elementi finiti è stato sviluppato per simulare il processo di tornitura su tale lega, capace di predire gli effetti di diversi parametri di processo. Visti i benefici apportati dalla lubrificazione criogenica sull'integrità superficiale di componenti torniti di Ti6AL4V EBM, l’applicabilità di tale tecnologia in campo biomedicale è stata validata mediante delle prove di usura: la resistenza all’usura del materiale è risultata notevolmente incrementata con minor rilascio di particelle metalliche. In fine, la tornitura criogenica è stata applicata nella lavorazione di reali coppe acetabolari, comparandone gli effetti con le più tradizionali strategie di lubrificazione. I positivi risultati in termini di miglioramento della lavorabilità, di resistenza all'usura accompagnati da soddisfacente precisione dimensionale, fanno intravvedere un’efficiente applicazione della tornitura criogenica in campo biomedicale negli anni futuri.
Meyer, Christian [Verfasser], et Andreas [Akademischer Betreuer] Wolf. « The lowest rotational quantum states of hydroxyl anions probed by electron photodetachment in a cryogenic storage ring / Christian Meyer ; Betreuer : Andreas Wolf ». Heidelberg : Universitätsbibliothek Heidelberg, 2018. http://d-nb.info/1177385864/34.
Texte intégralWilhelm, Patrick Udo [Verfasser], et Andreas [Akademischer Betreuer] Wolf. « First Studies of Low-Energy Electron Cooling of keV Energy Ion Beams at the Electrostatic Cryogenic Storage Ring CSR / Patrick Udo Wilhelm ; Betreuer : Andreas Wolf ». Heidelberg : Universitätsbibliothek Heidelberg, 2019. http://d-nb.info/1191758532/34.
Texte intégralRizvi, Syed Asad Ali. « Design of Novel Molecular Micelles for Capillary Electrophoresis ». Digital Archive @ GSU, 2006. http://digitalarchive.gsu.edu/chemistry_diss/5.
Texte intégralAkhtar, Sultan. « Transmission Electron Microscopy of Graphene and Hydrated Biomaterial Nanostructures : Novel Techniques and Analysis ». Doctoral thesis, Uppsala universitet, Tillämpad materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-171991.
Texte intégralFarrell, Jason. « The influence of cation doping on the electronic properties of Sr₃Ru₂O₇ ». Thesis, St Andrews, 2008. http://hdl.handle.net/10023/689.
Texte intégralRoberts, Anthony M. « Implementing a Piezoelectric Transformer for a Ferroelectric Phase Shifter Circuit ». Cleveland State University / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=csu1337025849.
Texte intégralRengnez, Florentin. « Développement de comparateur cryogénique de courants très faible bruit pour la métrologie électrique quantique ». Thesis, Université Paris-Saclay (ComUE), 2015. http://www.theses.fr/2015SACLN009/document.
Texte intégralIn a context of growing need of precision in measuring low currents for national metrology institutes, industry, instrument manufacturers and fundamental physics, study of single-electron tunneling (SET) devices capable of generating a direct current directly proportional to the frequency and the elementary charge, coupled with a high performance current amplifier, the cryogenic current comparator (CCC), becomes relevant to realize a quantum current standard. In this framework, at LNE, study of new SET devices and the development of CCCs continues. In this thesis, an experimental setup was implemented to evaluate the performance of a new CCC, consisting of a new design and 30 000 turns. The experimental results fulfill our goals, whether in terms of current resolution, errors, measurement stability and reproducibility. The CCC developed during the thesis can thus be used to metrologically quantify SET devices. In addition, a model based on an equivalent circuit diagram has been developed to simulate the actual behavior of the CCC, taking into account the magnetic and electrical aspects involved. This simulation allows the quantification of the error due to currents leakage through parasitic capacitances surrounding the windings. Results of the simulation indicate that this error reaches 10 10, which is less, by two orders of magnitude, than the maximum tolerable error: 10 8. Results obtained experimentally and by simulation provide new improvement elements in the design of high ratio CCCs. The developed model, once inserted into an optimization routine, can also be a very useful design tool of CCCs
Chaaban, Abdul Amir. « Etude de l'organisation structurale des nanocolloïdes humiques ». Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30062/document.
Texte intégralThe structural organization of humic nanocolloids remains a matter of harsh debate, and surprisingly, it is yet not possible to decide between an arrangement of the humic matter in the form of randomly coiled macromolecules more or less connected, and a supramolecular organization of small heterogeneous molecules linked by hydrogen bonds and hydrophobic interactions. In this study, we investigate the reconformation induced by the addition of cationic surfactants (C n-trimethylammonium chloride) of varying alkyl chain length with a series of humic substances (HS) and Dissolved Organic matter (DOM) from two blackwater rivers of the Central Amazon. Turbidity measurements, Dynamic light scattering, electrophoretic mobility, surface tension, fluorescence spectroscopy, small angle neutron scattering and cryo-transmission electron microscopy (cryo-TEM), are combined to describe the Humic Substance/Surfactant complexes obtained. The association between the oppositely charged HS and cationic surfactant is driven by both electrostatic and hydrophobic interactions. A variety of molecular structures, unilamellar vesicles, disks, globules, spheroidal micelles, are visualized by cryo-TEM depending on surfactant concentration. Such sequence, consistent with those displayed by catanionic systems, provides an independent confirmation of both the amphiphilic nature of HS and of its supramolecular organization. In addition, the molecular rearrangement was investigated using single-scan fluorescence emission spectra spectroscopy, thus identifying the chemical groups responsible for the fluorescence properties in HS and DOM. The addition of cationic surfactant to HS/DOM unveils an unexpected fine structure of humic-like fluorescence through new emission peaks that are not evidenced in the references HS/DOM. An enhanced protein-like fluorescence indicating major restructuration and structural stacking/de-stacking is observed. All our results support a supramolecular organization of humic substances and DOM
Otto, Ernst. « Development of superconducting bolometer device technology for millimeter-wave cosmology instruments ». Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:30a1103a-ea7a-4b08-ba92-665cbd9740e0.
Texte intégralVenkataraman, Sunitha. « Systematic Analysis of the Small-Signal and Broadband Noise Performance of Highly Scaled Silicon-Based Field-Effect Transistors ». Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/16232.
Texte intégralHuisman, Maximiliaan. « Vision Beyond Optics : Standardization, Evaluation and Innovation for Fluorescence Microscopy in Life Sciences ». eScholarship@UMMS, 2019. https://escholarship.umassmed.edu/gsbs_diss/1017.
Texte intégralSylvestre, Alain. « Evolution des proprietes electriques et physiques aux basses temperatures de transistors a effet de champ a heterojonction a grille courte sur substrat inp ». Paris 11, 1996. http://www.theses.fr/1996PA112020.
Texte intégral(8999573), James R. Nakamura. « Electronic Fabry-Perot Interferometry of Quantum Hall Edge States ». Thesis, 2020.
Trouver le texte intégralRapp, Micah. « Visualizing cell surface interactions using cryogenic electron microscopy ». Thesis, 2021. https://doi.org/10.7916/d8-5s5d-3s98.
Texte intégralTan, Yong Zi. « Solving Challenging Structures using Single-Particle Cryogenic Electron Microscopy ». Thesis, 2019. https://doi.org/10.7916/d8-czh4-ry10.
Texte intégral