Bibliographies thématiques / Cryogenic electronic

Littérature scientifique sur le sujet « Cryogenic electronic »

Auteur : Grafiati
Publié le 14 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Cryogenic electronic ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Cryogenic electronic"

1

KAMIOKA, YASUHARU. « Cryogenics and Cryogenic Technology. » Journal of the Institute of Electrical Engineers of Japan 123, no 12 (2003) : 786–87. http://dx.doi.org/10.1541/ieejjournal.123.786.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Fitelson, Michael M. « Cryogenic electronic systems ». Physica C : Superconductivity 372-376 (août 2002) : 189–93. http://dx.doi.org/10.1016/s0921-4534(02)00651-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

McIntyre, Peter. « Testing of the Superconducting Magnet and Cryogenics for the AMS-02 Experiment ». IEEE Transactions on Applied Superconductivity 21, no 3 (juin 2011) : 1868–71. http://dx.doi.org/10.1109/tasc.2010.2087731.

Texte intégral
Résumé :
The superconducting magnet, cryogenics, and detector systems of the AMS experiment was fully integrated and tested in test beam at CERN during 2009. In Spring 2010 the experiment underwent thermal vacuum tests at ESTEC, where it was operated in conditions simulating those that will pertain in orbit. All elements of the superconducting magnet and cryogenics performed as designed, and equilibrium operation was attained at several values of vacuum case temperature. Details of the tests are presented. A thermal model of the overall cryogenic system was calibrated from those measurements. The model was used to predict the cryogenic lifetime of the experiment, as it would be staged on ISS, to be (28 ± 6) months.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Buchanan, Ernest D., Dominic J. Benford, Joshua B. Forgione, S. Harvey Moseley et Edward J. Wollack. « Cryogenic applications of commercial electronic components ». Cryogenics 52, no 10 (octobre 2012) : 550–56. http://dx.doi.org/10.1016/j.cryogenics.2012.06.017.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Dahlberg, Peter D., Allison H. Squires, Annina M. Sartor, Haijun Liu, Robert E. Blankenship et W. E. Moerner. « Cryogenic Dissection of the Phycobilisome's Electronic Structure ». Biophysical Journal 114, no 3 (février 2018) : 169a. http://dx.doi.org/10.1016/j.bpj.2017.11.943.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Haldar, P., H. Ye, H. Efstathiadis, J. Raynolds, M. J. Hennessy, O. M. Mueller et E. K. Mueller. « Improving Performance of Cryogenic Power Electronics ». IEEE Transactions on Appiled Superconductivity 15, no 2 (juin 2005) : 2370–75. http://dx.doi.org/10.1109/tasc.2005.849668.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Claassen, J. H. « Inductor Design for Cryogenic Power Electronics ». IEEE Transactions on Appiled Superconductivity 15, no 2 (juin 2005) : 2385–88. http://dx.doi.org/10.1109/tasc.2005.849678.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Szczepaniak, Urszula, Robert Kołos, Marcin Gronowski, Michèle Chevalier, Jean-Claude Guillemin, Michał Turowski, Thomas Custer et Claudine Crépin. « Cryogenic Photochemical Synthesis and Electronic Spectroscopy of Cyanotetracetylene ». Journal of Physical Chemistry A 121, no 39 (25 septembre 2017) : 7374–84. http://dx.doi.org/10.1021/acs.jpca.7b07849.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Tanaka, Toshikatsu, et Isidor Sauers. « Editorial - Cryogenic dielectrics ». IEEE Transactions on Dielectrics and Electrical Insulation 15, no 3 (juin 2008) : 619. http://dx.doi.org/10.1109/tdei.2008.4543096.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Divyasheesh, Viplove, et Rakesh Jain. « Feasibility of Quantum Computers in Cryogenic Systems ». International Journal of Engineering and Computer Science 9, no 01 (21 janvier 2020) : 24919–20. http://dx.doi.org/10.18535/ijecs/v9i01.4412.

Texte intégral
Résumé :
Quantum computers consist of a quantum processor – sets of quantum bits or qubits operating at an extremely low temperature – and a classical electronic controller to read out and control the processor. The machines utilize the unusual properties of matter at extremely small scales – the fact that a qubit, can represent “1” and “0” at the same time, a phenomenon known as superposition. (In traditional digital computing, transistors in silicon chips can exist in one of two states represented in binary by a 1 or 0 not both). Under the right conditions, computations carried out with qubits are equivalent to numerous classical computations performed in parallel, thus greatly enhancing computing power compared to today’s powerful supercomputers and the ability to solve complex problems without the sort of experiments necessary to generate quantum phenomena. this technology is unstable and needs to be stored in a cool environment for faster and more secure operation.In this paper, we discuss the possibility of integrating quantum computers with electronics at deep cryogenic temperatures.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Cryogenic electronic"

1

Schalk, Martin. « Ultra-fast electronic pulse control at cryogenic temperatures ». Thesis, Université Grenoble Alpes (ComUE), 2019. http://www.theses.fr/2019GREAY061.

Texte intégral
Résumé :
Synchronisation ultra-rapide, mise en forme d’impulsions et commutation efficace sont au cœur des mesures précises. L’objectif de ce projet de thèse est d’apporter le contrôle électronique ultra-rapide aux circuits nanométriques refroidis à des températures de l’ordre du mK. L’opération quantique rapide rapprochera le domaine de l’optique électronique quantique de son homologue photonique avec des applications pour un contrôle électronique rapide et efficace des dispositifs quantiques. Les dispositifs expérimentaux développés au cours de ce projet de thèse sont décrits et testés de manière à esquisser également les possibilités d’intégration dans les technologies quantiques. Dans un premier temps, une impulsion de tension de forme lorentzienne Γ = (76 ± 2) ps est mesurée de manière résolue dans le domaine temporel à des températures cryogéniques. Ensuite, les dérives de phase et d’amplitude sont analysées et optimisé avec le spectre de bruit. Un nouveau dispositif de génération d’impulsions utilisant un générateur de peigne est ensuite décrit et testé. Enfin, un futur réalisation d’une expérience d’interférence quantique par manipulation et détection dans un conducteur quantique est décrite, de même que les défis posés pour les dispositives quantiques à basse température et ses interconnexions
Ultra-fast synchronization, pulse shaping, and efficient switching are at the heart of precise measurements. The aim of this thesis project is to bring ultra-fast electronic control to small nano-metric circuits cooled down to mK temperatures. The fast quantum operation will bring the field of quantum-electronic optics closer to its photoniccounterpart with applications for fast and efficient electronic control in quantum devices. To this end, the experimental setups developed during the thesis project are described and tested in a way to outline also possible device integration for scalable solid-state quantum technology. As a first step, a Lorentzian-shaped voltage pulse with a full width half maximum Γ = (76 ± 2) ps is measured in a time-resolved manner at cryogenic temperatures. Secondly, the phase and amplitude drifts are analyzed and optimized together with the noise spectrum. A new pulse generation setup using a microwave frequency comb generator is then described and tested. Finally, a future realization of a quantum interference experiment by manipulating and detecting electronic pulses in a quantum conductor is described along with challenges for low-temperature quantum hardware and interconnects
Styles APA, Harvard, Vancouver, ISO, etc.
2

Van, Niekerk Philip Charl. « A Cryogenic CMOS-based Control System for Testing Superconductor Electronics ». Thesis, Link to the online version, 2008. http://hdl.handle.net/10019/1338.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

MARTINEZ, ROJAS ALEJANDRO DAVID. « Integrated cryogenic electronics to readout large areas SiPMs ». Doctoral thesis, Politecnico di Torino, 2021. http://hdl.handle.net/11583/2907032.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Badenhorst, Le Roux. « Cryogenic amplifiers for interfacing superconductive systems to room temperature electronics ». Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/1586.

Texte intégral
Résumé :
Thesis (MScEng (Electrical and Electronic Engineering))--Stellenbosch University, 2008.
This thesis is aimed at testing commercially available CMOS amplifier ICs at 4 K. Super Conducting Electronics (SCE) will also be used to amplify RSFQ signals for easier detection by CMOS technology and better signal-to-noise ratios. The SCE comprises of a Suzuki stack amplifier, a 250 μA JTL and a DC-to-SFQ converter. The Suzuki stack amplifier is simulated in WRSPICE. It is able to amplify an SFQ signal synchronised with an external clock signal. The amplified signal can then be detected by a normal commercially available CMOS amplifier IC. To keep the noise in the signal to a minimum, the commercial amplifier must be be situated as close as possible to the SCE. The amplifier must therefore be able to operate at 4 K. Ten different amplifier ICs were tested and three was found that worked down to 4 K.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Langhammer, David. « On the chromogenic behavior of tungsten oxide films : A cryogenic experiment ». Thesis, Uppsala universitet, Institutionen för kemi - Ångström, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-263554.

Texte intégral
Résumé :
The chromogenic properties of tungsten trioxide (WO3) have been studied by photoluminescence spectroscopy at 4.2 K in order to characterize the electronic structure of this material and see how this relates to optical responses during chromogenic coloration. Transition processes between electron energy states are often the cause of optical phenomena and it is important to identify such processes in order to understand the chromogenic coloration of tungsten oxide films. Much research work has been devoted to characterize the physical and chemical mechanisms that are responsible for this coloration and this is of fundamental importance to understand the chromogenic behavior. The latest research shows that oxygen vacancies could play an important role in certain coloration processes, but it is still a matter of debate whether these are important for the overall response. This work aims to identify specific transitions that are related to oxygen vacancies by measuring photoluminescence from films with controlled vacancy content. The main goal of the project was to set up an experiment that could measure photoluminescence at liquid helium temperature. This was done by installing and integrating the components included in this experimental set-up. The films had been prepared prior to this work and were deposited on a nanocrystalline CaF2 substrate, which is a material that has a very large band gap and was therefore expected to fully transparent in the UV range. However it was found that the substrate inelastically scattered the UV excitation light, which produced strong signals that overshadowed the photoluminescence and prevented an effective characterization of the electronic structure in the films. Instead, suggestions were given on how to minimize uncertainty factors and overcome the difficulties met in this work. It was also found that the films attain a lasting blue coloration by exposure to UV light in vacuum, and that this might be due to oxygen being desorbed from the film during experiments in vacuum.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Sinthiptharakoon, K. « Investigation of individual donors in silicon at cryogenic temperature with atomic-scale resolution for atomic electronic devices ». Thesis, University College London (University of London), 2015. http://discovery.ucl.ac.uk/1460900/.

Texte intégral
Résumé :
There is an urgent need for characterisation of group V donors in silicon necessary for the development of quantum information processing (QIP) devices, and my PhD work has been contributed towards this objective. In this thesis, three different group V donors were individually studied with scanning tunnelling microscopy (STM) and spectroscopy (STS), combined with DFT calculation and simulated STM images where necessary. Si(001) dosed with phosphine (PH3) at room temperature prior and imaged at 77 K a few minutes later was investigated. Novel phosphine-related features were observed and compared to the room-temperature results [4]. Some features were the same as the room-temperature dissociative products but a new dissociative mechanism was proposed and novel bonding configurations were assigned to the features. A transformation between adsorbates was seen to occur on the surface at 77 K and was attributed to a tip-induced effect. The appearance of the Si-P heterodimer was found to be different at 77 K and room temperature [5] and the reasons for this difference was discussed. Subsurface As and Bi donors below the Si(001):H surface were separately investigated at 77 K. Special sample annealing (flashing) procedures were created for both studies. There were two classes of As features commonly observed while there were three types for Bi. The appearance of the As features related to the As wavefunction informed that the subsurface As donors were electrically neutral but could be reversibly switched to being ionised (positively-charged) by changing the sample bias. Some subsurface As donors can also be negatively-charged, depending on their distances from the surface. DFT calculations were performed and simulated STM images were generated to compare with the experimental data, allowing us to assign the features to As donors at their exact lattice positions. The appearance of the Bi features indicated that the Bi donors were negatively-charged but could be changed to being positively-charged. With the unequal rate of tunnelling in and off the donor energy level, the Bi donors could be switched back to being negatively-charged again. The Bi wavefunction projection was speculated, based on the Bi features.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Müller, David [Verfasser], Otto [Akademischer Betreuer] Dopfer, Otto [Gutachter] Dopfer et Michael [Gutachter] Schmitt. « Electronic spectroscopy of flavins in a cryogenic 22 - pole ion trap / David Müller ; Gutachter : Otto Dopfer, Michael Schmitt ; Betreuer : Otto Dopfer ». Berlin : Technische Universität Berlin, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021092901572707449456.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Rao, P. Sharath Chandra. « Analysis of fluid circulation in a spherical cryogenic storage tank and conjugate heat transfer in a circular microtube ». [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0000461.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Reinke, Benjamin T. « Design, Characterization, and Simulation of a Cryogenic Irradiation Facility in the Ohio State University Research Reactor Pool ». The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1437746576.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Conrad, Theodore Judson. « Miniaturized pulse tube refrigerators ». Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41108.

Texte intégral
Résumé :
Pulse tube refrigerators (PTR) are robust, rugged cryocoolers that do not have a moving component at their cold ends. They are often employed for cryogenic cooling of high performance electronics in space applications where reliability is paramount. Miniaturizing these refrigerators has been a subject of intense research interest because of the benefits of minimal size and weight for airborne operation and because miniature coolers would be an enabling technology for other applications. Despite much effort, the extent of possible PTR miniaturization is still uncertain. To partially remedy this, an investigation of the miniaturization of pulse tube refrigerators has been undertaken using several numerical modeling techniques. In support of these models, experiments were performed to determine directional hydrodynamic parameters characteristic of stacked screens of #635 stainless steel and #325 phosphor bronze wire mesh, two fine-mesh porous materials suitable for use in the regenerator and heat exchanger components of miniature PTRs. Complete system level and pulse tube component level CFD models incorporating these parameters were then employed to quantitatively estimate the effects of several phenomena expected to impact the performance of miniature PTRs. These included the presence of preferential flow paths in an annular region near the regenerator wall and increased viscous and thermal boundary layer thicknesses relative to the pulse tube diameter. The effects of tapering or chamfering the junctions between components of dissimilar diameters were also investigated. The results of these models were subsequently applied to produce successively smaller micro-scale PTR models having total volumes as small as 0.141 cc for which sufficient net cooling was predicted to make operation at cryogenic temperatures feasible. The results of this investigation provide design criteria for miniaturized PTRs and establish the feasibility of their operation at frequencies up to 1000 Hz with dimensions roughly an order of magnitude smaller than those that have recently been demonstrated, provided that challenges related to their regenerator fillers and compressors can be addressed.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Cryogenic electronic"

1

L, Patterson R., et NASA Glenn Research Center, dir. Electronic components and systems for cryogenic space applications. [Cleveland, Ohio] : National Aeronautics and Space Administration, Glenn Research Center, 2001.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Kalia, Susheel. Polymers at Cryogenic Temperatures. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Y, Andrei Eva, dir. Two-dimensional electron systems on helium and other cryogenic substrates. Dordrecht : Kluwer Academic Publishers, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

W, Simon T., Oktay S, American Society of Mechanical Engineers. Heat Transfer Division., American Society of Mechanical Engineers. K-16 Committee on Heat Transfer in Electronic Equipment. et AIAA/ASME Thermophysics and Heat Transfer Conference (5th : 1990 : Seattle, Wash.), dir. Cryogenic and immersion cooling of optics and electronic equipment : Presented at AIAA/ASME Thermophysics and Heat Transfer Conference, June 18-20, 1990, Seattle, Washington. New York, N.Y : American Society of Mechanical Engineers, 1990.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

G, Walker. Miniature refrigeratorsfor cryogenic sensors and cold electronics. Oxford : Clarendon, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Miniature refrigerators for cryogenic sensors and cold electronics. Oxford [England] : Clarendon Press, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Balestra, Francis, et Gérard Ghibaudo, dir. Device and Circuit Cryogenic Operation for Low Temperature Electronics. Boston, MA : Springer US, 2001. http://dx.doi.org/10.1007/978-1-4757-3318-1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Downie, N. A. Industrial gases. London : Blackie Academic & Professional, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Balestra, Francis, et G. Ghibaudo. Device and Circuit Cryogenic Operation for Low Temperature Electronics. Springer, 2010.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

(Editor), Francis Balestra, et G. Ghibaudo (Editor), dir. Device and Circuit Cryogenic Operation for Low Temperature Electronics. Springer, 2001.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Cryogenic electronic"

1

LeTourneau, V., J. H. Claassen, S. A. Wolf, D. U. Gubser, T. L. Francavilla et R. A. Hein. « Superconducting Wires for Electronic Applications ». Dans Advances in Cryogenic Engineering Materials, 579–84. Boston, MA : Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-9871-4_69.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Nisenoff, M. « Superconductivity : The Ultimate Electronic Technology ». Dans A Cryogenic Engineering Conference Publication, 77–86. Boston, MA : Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-9874-5_10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Chrysler, G. M., et R. C. Chu. « Cooling of High Power Density Electronic Chips ». Dans Advances in Cryogenic Engineering, 881–87. Boston, MA : Springer US, 1990. http://dx.doi.org/10.1007/978-1-4613-0639-9_105.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Tilton, Donald E., Donald A. Kearns et Charles L. Tilton. « Liquid Nitrogen Spray Cooling of a Simulated Electronic Chip ». Dans Advances in Cryogenic Engineering, 1779–86. Boston, MA : Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2522-6_217.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Ryan, P. A. « High Temperature Superconducting Filter Technology for Electronic Warfare Systems ». Dans Advances in Cryogenic Engineering Materials, 1023–29. Boston, MA : Springer US, 1996. http://dx.doi.org/10.1007/978-1-4757-9059-7_134.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Voth, R. O., et J. D. Siegwarth. « An Electronic Balance for Weighing Foams at Cryogenic Temperatures ». Dans A Cryogenic Engineering Conference Publication, 1089–95. Boston, MA : Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-9874-5_131.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Jin, J. X., C. Grantham, H. K. Liu, M. Apperley et S. X. Dou. « Electronic High Voltage Generator with a High Temperature Superconducting Coil ». Dans A Cryogenic Engineering Conference Publication, 991–96. Boston, MA : Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0373-2_127.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Xiong, Wei, Witold Kula et Roman Sobolewski. « Fabrication of High-T c Superconducting Electronic Devices Using the Laser-Writing Technique ». Dans Advances in Cryogenic Engineering Materials, 385–91. Boston, MA : Springer US, 1994. http://dx.doi.org/10.1007/978-1-4757-9053-5_50.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Nakahara, S., S. Nishida, S. Hisada et T. Fujita. « Thermal Contraction Coefficient Measurement Technique of Several Materials at Low Temperatures Using Electronic Speckle Pattern Interferometry ». Dans Advances in Cryogenic Engineering Materials, 359–66. Boston, MA : Springer US, 1998. http://dx.doi.org/10.1007/978-1-4757-9056-6_47.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Schlaghaufer, Florian, Johannes Fischer et Alkwin Slenczka. « Electronic Spectroscopy in Superfluid Helium Droplets ». Dans Topics in Applied Physics, 179–240. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94896-2_5.

Texte intégral
Résumé :
AbstractElectronic spectroscopy has been instrumental in demonstrating the properties of helium droplets as a cryogenic matrix for molecules. The electronic spectrum of glyoxal, which was one of the first molecules investigated in helium droplets by means of electronic spectroscopy, showed two features that provided convincing evidence that the droplets were superfluid. These were free rotation and the distinct shape of the phonon side band which could be directly assigned to the characteristic dispersion curve of a superfluid. On closer examination, however, details such as increased moments of inertia and a spectral response on the droplet size distribution revealed unexpected features of microsolvation in the superfluid helium. In the course of studying many different molecules, it has become clear that electronic spectroscopy in helium droplets provides insight into the detailed effects of microsolvation. These in turn lead to numerous questions regarding the interaction with the superfluid which are discussed in this chapter. In addition, the influence of microsolvation in helium droplets on van der Waals clusters generated inside helium droplets are discussed. Finally, the effect of helium solvation on unimolecular or bimolecular elementary chemical reactions is evaluated in comparison with corresponding experiments in the gas phase. Particular focus of this article lies on the spectral features related to helium solvation which are not yet fully understood.
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Cryogenic electronic"

1

Yin, Bozhi, Hayk Gevorgyan, Deniz Onural, Anatol Khilo, Milos A. Popovic et Vladimir M. Stojanovic. « Electronic-Photonic Cryogenic Egress Link ». Dans ESSCIRC 2021 - IEEE 47th European Solid State Circuits Conference (ESSCIRC). IEEE, 2021. http://dx.doi.org/10.1109/esscirc53450.2021.9567813.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Yin, Bozhi, Hayk Gevorgyan, Deniz Onural, Anatol Khilo, Milos A. Popovic et Vladimir M. Stojanovic. « Electronic-Photonic Cryogenic Egress Link ». Dans ESSDERC 2021 - IEEE 51st European Solid-State Device Research Conference (ESSDERC). IEEE, 2021. http://dx.doi.org/10.1109/essderc53440.2021.9631830.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Patterson, R. L. « Electronic components and systems for cryogenic space applications ». Dans ADVANCES IN CRYOGENIC ENGINEERING : Proceedings of the Cryogenic Engineering Conference - CEC. AIP, 2002. http://dx.doi.org/10.1063/1.1472193.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Smith, Joseph L. « Application of Cryogenics to Electronics ». Dans ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42193.

Texte intégral
Résumé :
One of the impediments to the application of cryogenics to electronic apparatus is the incompatibility of equipment developed for operation in an ambient environment with a cryogenic environment. The need for the development of cooling and packaging concepts optimized for operation at cryogenic temperature is discussed The opportunities for high efficiency cryocoolers for temperatures of 10 K and below are presented. An entropy flow view of refrigerated cooling is presented. The available methods of refrigeration for operating electronic components at cryogenic temperature are outlined briefly. The three-stage modular Collins-cycle cryocooler that is being developed at the MIT and AMTI is described.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Suman, Shivesh K., Andrei G. Fedorov et Yogendra K. Joshi. « Thermodynamic Design of Compact Thermal Compressor for Sorption Assisted Cryogenic Cooling of Electronics ». Dans ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems collocated with the ASME 2005 Heat Transfer Summer Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/ipack2005-73452.

Texte intégral
Résumé :
During the past several decades, significant performance improvement of microprocessor chips has been obtained mainly by reduction of (transistor) device length scale. Beyond the International Technology Roadmap for Semiconductors (ITRS)-defined 50 nm technology node, the parasitic effects associated with reduction of the feature size (e.g., increase in leakage current) begin to outweigh the favorable effects of increased functionality and speed. One promising route for continued performance improvement is to exploit low temperature operation of microprocessors (also referred to as the temperature scaling [1]). This calls for development of compact, inexpensive, and quiet refrigeration/cryogenics technology, which can be interfaced with electronic components. In this work, we consider thermally driven sorption-assisted refrigeration technology for sub-ambient cooling of high performance electronics. In the past, sorption-based cryocoolers have been successfully developed for cryogenic cooling of sensors in space applications, targeting very low (mW-level) cooling loads. These cryocoolers are quiet, vibration free, reliable since they have no moving parts at high pressure, and therefore offer significant advantages over mechanical refrigeration. In addition, there is no refrigerant-lubricant interaction in sorption-based cryocoolers, which can potentially degrade the evaporator performance. This paper presents a thermodynamics-based analytical framework for the design of sorption compressors for cryogenic cooling of electronics. A sample case study is also presented to illustrate the approach.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Okumura, Kenichi, Iwao Hosako, Yukari Yamashita-Yui, Makoto Akiba et Norihisa Hiromoto. « Development of GaAs JFETs for cryogenic electronic circuits ». Dans Astronomical Telescopes & Instrumentation, sous la direction de Albert M. Fowler. SPIE, 1998. http://dx.doi.org/10.1117/12.317307.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Tachiki, Minoru, Hiroaki Ishizaka, Tokishige Banno, You Sumikawa, Hitoshi Umezawa et Hiroshi Kawarada. « Cryogenic operation of diamond surface-channel electronic devices ». Dans 2002 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2002. http://dx.doi.org/10.7567/ssdm.2002.p7-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Ye, Hua, et Pradeep Haldar. « Development of Cryogenic Power Modules for Superconducting Hybrid Power Electronic System ». Dans ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-69274.

Texte intégral
Résumé :
This paper presents the developments of high-performance integrated cryogenic power modules, where both driver components and power MOSFETs are integrated in a single package. These modules are designed to be used in liquid nitrogen environment with extreme thermal cycling for the cryogenic power inverters. Compact high-voltage, cryogenic integrated power modules with single power MOSFET that exhibited more than 14x improvement in on-resistance and continuous current-carrying capability exceeding 40A. A multi-power MOSFETs integrated cryogenic power module is then developed in order to further increase the power density and reduce the size and weight of the cryogenic power system. The multi-power MOSFETs module was demonstrated to be able to carry a current above 100A with only a small increase in footprint compared with the single power MOSFET module. At the current level of 100A, the multi-power MOSFETs module has an on-resistance of 5.5mU` at 77K, which is 6 times smaller than that of the single power MOSFET integrated module developed. Two different design approaches taken in the developments of these modules are discussed in this paper.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Antoniou, Nicholas, Adam Graham, Cheryl Hartfield et Gonzalo Amador. « Failure Analysis of Electronic Material Using Cryogenic FIB-SEM ». Dans ISTFA 2012. ASM International, 2012. http://dx.doi.org/10.31399/asm.cp.istfa2012p0399.

Texte intégral
Résumé :
Abstract Two-beam systems (focused ion beam (FIB) integrated with a scanning electron microscope (SEM)) have enabled site-specific analysis at the nano-scale through in situ “mill and view” capability at high resolution. In addition, a FIB-SEM can be used to cut away a lamella from a bulk sample and thin it for transmission electron microscopy (TEM) imaging. We studied the temperature dependence of FIB milling on compound semiconductors and thin films such as copper that are used in integrated circuits. These materials (GaAs, GaN, InN, etc) react chemically and physically with the gallium in the FIB and change chemical composition and may also change morphology. Copper metallization of IC’s has been difficult to mill without undesirable side effects. FIB milling for analysis of these materials becomes difficult if not impossible. Since temperature can be a big factor in chemical and physical reactions we investigated this and report here the effect of cooling the sample to cryogenic temperatures while milling. In addition, we report on the development of a process to prepare TEM lamellae with FIB entirely in a cryogenic environment.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Weber, J., James Smith et Shuang Xu. « THE ELECTRONIC SPECTRUM OF CRYOGENIC RUTHENIUM-TRIS-BIPYRIDINE DICATIONS ». Dans 71st International Symposium on Molecular Spectroscopy. Urbana, Illinois : University of Illinois at Urbana-Champaign, 2016. http://dx.doi.org/10.15278/isms.2016.td03.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Cryogenic electronic"

1

Braga, Davide. NECQST : Novel Electronics for Cryogenic Quantum Sensors Technology. Office of Scientific and Technical Information (OSTI), octobre 2019. http://dx.doi.org/10.2172/1630711.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Chronis, W. C., D. Arenius, D. Kashy, M. Keesee et C. H. Rode. The CEBAF cryogenic system : Continuous Electron Beam Accelerator Facility. Office of Scientific and Technical Information (OSTI), janvier 1989. http://dx.doi.org/10.2172/6360179.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

George, Anoop. Study of Secondary Electron Emission from Niobium at Cryogenic Temperatures. Office of Scientific and Technical Information (OSTI), août 2005. http://dx.doi.org/10.2172/1552175.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Watt, John Daniel. Soft matter and nanomaterials characterization by cryogenic transmission electron microscopy. Office of Scientific and Technical Information (OSTI), janvier 2020. http://dx.doi.org/10.2172/1593111.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Nam, Sae Woo. Development of phonon-mediated cryogenic particle detectors with electron and nuclear recoil discrimination. Office of Scientific and Technical Information (OSTI), décembre 1998. http://dx.doi.org/10.2172/1421523.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Klem, Michael. Sensitivity of Inferred Electron Temperature from X-ray Emission of NIF Cryogenic DT Implosions. Office of Scientific and Technical Information (OSTI), mai 2015. http://dx.doi.org/10.2172/1251090.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Han, Bong-Gyoon. Streptavidin Affinity Grids for the Preparation of Biological Samples for Cryogenic Electron Microscopy : CRADA Final Report. Office of Scientific and Technical Information (OSTI), août 2022. http://dx.doi.org/10.2172/1882697.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Cryogenic electronic » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie