Littérature scientifique sur le sujet « Creep-induced damage mechanism »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Creep-induced damage mechanism ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Creep-induced damage mechanism"
Liu, Jifeng, et Huizhi Zhang. « Water Content Influence on Properties of Red-Layers in Guangzhou Metro Line, China ». Advances in Materials Science and Engineering 2017 (2017) : 1–12. http://dx.doi.org/10.1155/2017/4808909.
Texte intégralLeng, Dingxin, Kai Xu, Liping Qin, Yong Ma et Guijie Liu. « A Hyper-Elastic Creep Approach and Characterization Analysis for Rubber Vibration Systems ». Polymers 11, no 6 (4 juin 2019) : 988. http://dx.doi.org/10.3390/polym11060988.
Texte intégralChan, K. S., N. S. Brodsky, A. F. Fossum, D. E. Munson et S. R. Bodner. « Creep-Induced Cleavage Fracture in WIPP Salt Under Indirect Tension ». Journal of Engineering Materials and Technology 119, no 4 (1 octobre 1997) : 393–400. http://dx.doi.org/10.1115/1.2812275.
Texte intégralBao, Yi Wang, et Yan Chun Zhou. « Bending Creep and Stress Relaxation of Ti3AlC2 at High Temperature ». Key Engineering Materials 280-283 (février 2007) : 1373–78. http://dx.doi.org/10.4028/www.scientific.net/kem.280-283.1373.
Texte intégralWang, Yang-Yang, Chen Jia, Morteza Tayebi et Bejan Hamawandi. « Microstructural Evolution during Accelerated Tensile Creep Test of ZK60/SiCp Composite after KoBo Extrusion ». Materials 15, no 18 (16 septembre 2022) : 6428. http://dx.doi.org/10.3390/ma15186428.
Texte intégralKhan, Talha H., Michael T. Myers, Lori Hathon et Gabriel C. Unomah. « Time-Scaling Creep in Salt Rocks for Underground Storage ». Petrophysics – The SPWLA Journal of Formation Evaluation and Reservoir Description 64, no 6 (1 décembre 2023) : 954–69. http://dx.doi.org/10.30632/pjv64n6-2023a10.
Texte intégralJazaeri, Hedieh, P. Bouchard, Michael Hutchings, Mike Spindler, Abdullah Mamun et Richard Heenan. « An Investigation into Creep Cavity Development in 316H Stainless Steel ». Metals 9, no 3 (12 mars 2019) : 318. http://dx.doi.org/10.3390/met9030318.
Texte intégralPuzrin, Alexander M., Thierry Faug et Itai Einav. « The mechanism of delayed release in earthquake-induced avalanches ». Proceedings of the Royal Society A : Mathematical, Physical and Engineering Sciences 475, no 2227 (juillet 2019) : 20190092. http://dx.doi.org/10.1098/rspa.2019.0092.
Texte intégralChen, Xingzhou, Quan Zhang, Xinchao Ding, Lili Chen, Wei Du, Hai Jiang et Sheng Gong. « Study on the Creep Characteristics and Fractional Order Model of Granite Tunnel Excavation Unloading in a High Seepage Pressure Environment ». Sustainability 15, no 5 (3 mars 2023) : 4558. http://dx.doi.org/10.3390/su15054558.
Texte intégralCHRZANOWSKI, MARCIN, et KRZYSZTOF NOWAK. « ON MULTISCALE MODELLING OF CREEP DAMAGE BY MEANS OF CELLULAR AUTOMATA ». Journal of Multiscale Modelling 01, no 03n04 (juillet 2009) : 389–402. http://dx.doi.org/10.1142/s1756973709000153.
Texte intégralThèses sur le sujet "Creep-induced damage mechanism"
Sun, Yufeng. « Time-dependent hydromechanical behaviour of callovo-oxfordian claystone by anatytical and multiscale numerical methods ». Electronic Thesis or Diss., Vaulx-en-Velin, École nationale des travaux publics de l’État, 2023. http://www.theses.fr/2023ENTP0009.
Texte intégralIn the context of radioactive waste repository, the time-dependent hydromechanical behaviour of the Callovo-Oxfordian (COx) claystone is investigated to ensure the safety conditions required for long-term repository of radioactive wastes.The first two parts of the study are based on the phenomenological approach carried out directly at the macroscale. Firstly, a quasi-analytical model for the hydromechanical behaviour of a deep spherical cavity excavated in a dilatant poro-viscoplastic rock mass is presented, considering three stages of a simplified life cycle: excavation, free convergence and post-closure. Subsequently, the sensitive and probability analyses are carried out using the finite element code Cast3M toinvestigate the time-dependent extent of the Excavation Damaged Zone (EDZ) which refers to a region characterized by significant and mainly irreversible changes in geochemical and hydromechanical properties. In the following, a multiscale numerical approach is employed to investigate its creep and damage behaviour under mechanical condition. Firstly, a micromechanics-based model within the finite element square (FE2) framework is developed to model the short-term and long-term behaviours of saturated COx claystone. For the viscous behaviour, two microscale mechanisms have been introduced: the viscoplasticity of the clay aggregates and the viscoelasticity of their contacts. Then, the creep model of COx claystones developed at small scale is applied to model the large-scale creep behaviour at laboratory and gallery scales. From simulation results of laboratory scale, a clear three-stage creep process is reproduced, including the primary creep stage, second creep stage and tertiary creep stage. At the gallery scale, the long-term effect of viscosity on the gallery convergences, the evolution of EDZ, and the long-term drainage and pore pressure around a gallery are investigated. Finally, the above developed double-scale creep model used to simulate saturated cracked medium is extend to partial saturated case to study the interaction between rock and the atmosphere occurs through air circulation within underground galleries. The emphasis is to study the effect of the gallery air ventilation on hydromechanical behaviour of host rock. The model predictions reproduce the drainage and desaturation kinetics of undisturbed and damaged rock
Chapitres de livres sur le sujet "Creep-induced damage mechanism"
Zhao, Rong Guo, Wen Bo Luo, Chu Hong Wang et Xin Tang. « Effect of Stress-Induced Damage Evolution on Long-Term Creep Behavior of Nonlinear Viscoelastic Polymer ». Dans Fracture and Damage Mechanics V, 731–34. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-413-8.731.
Texte intégralActes de conférences sur le sujet "Creep-induced damage mechanism"
Islam, Nazrul, et Tasnim Hassan. « Damage Evaluation of Grade 91 Thick Cylinder Under Variable Thermal Cyclic Loading Using Continuum Damage Coupled Viscoplastic Models ». Dans ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93634.
Texte intégralDichiaro, Simone, Luca Esposito et Nicola Bonora. « Evaluation of Constraint Effect on Creep Crack Growth by Advanced Creep Modeling and Damage Mechanics ». Dans ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-29105.
Texte intégralWu, Xijia, et Zhong Zhang. « A Mechanism-Based Approach From Low Cycle Fatigue to Thermomechanical Fatigue Life Prediction ». Dans ASME Turbo Expo 2015 : Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-43974.
Texte intégralFan, Zhichao, Xuedong Chen, Ling Chen et Jialing Jiang. « Fatigue-Creep Damage Evolution Model and Life Prediction Methods Under Stress Controlled Mode ». Dans ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/creep2007-26151.
Texte intégralPayten, Warwick M., David W. Dean et Ken U. Snowden. « Creep-Fatigue Prediction of Low Alloy Ferritic Steels Using a Strain Energy Based Methodology ». Dans ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77208.
Texte intégralSasaki, Yamato, Hiroyuki Itoh, Naokazu Murata, Ken Suzuki et Hideo Miura. « High Temperature Damages of Ni-Base-Superalloy Caused by the Change of Nanotexture Due to Strain-Induced Anisotropic Diffusion ». Dans ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-37284.
Texte intégralMiura, Hideo, Ken Suzuki, Yamato Sasaki, Tomohiro Sano et Naokazu Murata. « High Temperature Damage of Ni-Base Superalloy Caused by the Change of Microtexture due to the Strain-Induced Anisotropic Diffusion of Component Elements ». Dans ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62411.
Texte intégralTan, Jian-Ping, Guo-Zhen Wang, Fu-Zhen Xuan, Shan-Tung Tu et Zheng-Dong Wang. « Effect of the Out-of-Plane Constraint on Creep Crack Growth Property of Cr-Mo-V Type Steel ». Dans ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57300.
Texte intégralSuzuki, Ken, Tomohiro Sano et Hideo Miura. « Effect of Alloying Elements on Creep and Fatigue Damage of Ni-Base Superalloy Caused by Strain-Induced Anisotropic Diffusion ». Dans ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64314.
Texte intégralLuo, Yifan, Shogo Tezuka, Koki Nakayama, Ayumi Nakayama, Ken Suzuki et Hideo Miura. « Creep-Fatigue Damage of Heat-Resistant Alloys Caused by the Local Lattice Mismatch-Induced Acceleration of the Generation and Accumulation of Dislocations and Vacancies ». Dans ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-68489.
Texte intégral