Littérature scientifique sur le sujet « Coupe – Vibrations »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Coupe – Vibrations ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Coupe – Vibrations"
Kribes, N., N. Ouelaa, M. A. Yallese et S. Belhadi. « Analyse de l'impact des paramètres de coupe et des vibrations sur la rugosité des pièces usinées en tournage à partir de la méthode de régression linéaire multiple ». Matériaux & ; Techniques 95, no 3 (2007) : 197–203. http://dx.doi.org/10.1051/mattech:2008004.
Texte intégralMortimer, B. « A Spider’s Vibration Landscape : Adaptations to Promote Vibrational Information Transfer in Orb Webs ». Integrative and Comparative Biology 59, no 6 (20 mai 2019) : 1636–45. http://dx.doi.org/10.1093/icb/icz043.
Texte intégralShaikh, Zubair, Sudarshan Gajre, Kishor Deshmukh et Jotiprasad Shete. « Developing a Robust Process for Design Margin Calculation Through Modal Scaling and Harmonic Analysis of Engine Mounted After Treatment System ». Indian Journal of Signal Processing 4, no 1 (28 février 2024) : 1–6. http://dx.doi.org/10.54105/ijsp.c4352.04010224.
Texte intégralRomdhon, Abdul ghofar, Mohammad Ilham, Rini puji Astutik et Denny Irawan. « Penanganan Lonjakan Vibrasi pada Rotor Elektrik Turbin di PLTU Gresik ». Journal of Applied Smart Electrical Network and Systems 1, no 02 (31 décembre 2020) : 47–54. http://dx.doi.org/10.52158/jasens.v1i02.116.
Texte intégralRen, Fushen, Baojin Wang et Suli Chen. « Nonlinear Modeling and Qualitative Analysis of Coupled Vibrations in a Drill String ». International Journal of Bifurcation and Chaos 28, no 10 (septembre 2018) : 1850119. http://dx.doi.org/10.1142/s0218127418501195.
Texte intégralMazur, Krzysztof, et Marek Pawełczyk. « Active Noise Control with a Single Nonlinear Control Filter for a Vibrating Plate with Multiple Actuators ». Archives of Acoustics 38, no 4 (1 décembre 2013) : 537–45. http://dx.doi.org/10.2478/aoa-2013-0063.
Texte intégralAghazadeh, Reza. « Free Vibration Analysis of Shear Deformable Small-Scale Tubes ». Academic Perspective Procedia 3, no 1 (25 octobre 2020) : 418–27. http://dx.doi.org/10.33793/acperpro.03.01.86.
Texte intégralAnsari, R., M. A. Ashrafi, T. Pourashraf et M. Hemmatnezhad. « Vibration Analysis of a Postbuckled Microscale FG Beam Based on Modified Couple Stress Theory ». Shock and Vibration 2014 (2014) : 1–20. http://dx.doi.org/10.1155/2014/654640.
Texte intégralJin, Hao, Weining Liu et Shunhua Zhou. « Optimization of Vibration Reduction Ability of Ladder Tracks by FEM Coupled with ACO ». Shock and Vibration 2015 (2015) : 1–6. http://dx.doi.org/10.1155/2015/484827.
Texte intégralBrennan, M. J., M. J. Day et R. J. Randall. « An Experimental Investigation into the Semi-Active and Active Control of Longitudinal Vibrations in a Large Tie-Rod Structure ». Journal of Vibration and Acoustics 120, no 1 (1 janvier 1998) : 1–12. http://dx.doi.org/10.1115/1.2893806.
Texte intégralThèses sur le sujet "Coupe – Vibrations"
Segreti, Michel Dudzinski Daniel. « Vibrations en coupe orthogonale Modélisation, étude de stabilité et validation expérimentale / ». Metz : Université Metz, 2008. ftp://ftp.scd.univ-metz.fr/pub/Theses/2002/Segreti.Michel.SMZ0201.pdf.
Texte intégralSegreti, Michel. « Vibrations en coupe orthogonale : Modélisation, étude de stabilité et validation expérimentale ». Metz, 2002. http://docnum.univ-lorraine.fr/public/UPV-M/Theses/2002/Segreti.Michel.SMZ0201.pdf.
Texte intégralBisu, Claudiu-Florinel. « Etude des vibrations auto-entretenues en coupe tridimensionnelle : nouvelle modélisation appliquée au tournage ». Phd thesis, Université Sciences et Technologies - Bordeaux I, 2007. http://tel.archives-ouvertes.fr/tel-00274647.
Texte intégralPour remédier à ce phénomène en tournage des matériaux, une étude expérimentale originale exploitant la notion de torseur d'efforts est mise en place pour déterminer, très précisément, le comportement dynamique du système usinant (pièce/outil/machine). Les principaux paramètres relatifs au comportement dynamique du système usinant sont identifiés. La localisation des déplacements de la pointe de l'outil dans un plan caractéristique est démontrée. L'existence de ce plan et les corrélations avec les caractéristiques élastiques du système usinant permettent de simplifier le modèle dynamique 3D et de proposer un modèle en accord avec les résultats expérimentaux tout en restant dans une configuration tridimensionnelle de la coupe.
La simulation numérique issue de ce modèle simplifié fournit des résultats en bon accord avec l'expérience.
Bisu, Claudiu Florinel. « Etude des vibrations auto-entretenues en coupe tridimensionnelle : nouvelle modélisation appliquée au tournage ». Bordeaux 1, 2007. http://www.theses.fr/2007BOR13375.
Texte intégralYaqub, Sajid. « Proposition d'une démarche pour identifier les efforts de coupe en présence de talonnage ». Paris, ENSAM, 2010. http://www.theses.fr/2010ENAM0056.
Texte intégralThe process damping results from the interference between tool clearance face and the workpiece generated surface and affects the stability of a machining process. Therefore it is necessary to take this phenomenon into consideration during the simulation of machining process. This thesis work presents a practical method for identification, modelling, and numerical simulation of process damping during machining of a workpiece. A special fixture has been used which creates the vibrations conditions necessary to generate the interference between tool clearance face and the specifically designed workpiece. The modelling of process damping is based on the numerical calculation of the interference volume between tool clearance face and the workpiece generated surface. The tool and workpiece geometries are represented by z-buffers whose relative positions at each instant permit to evaluate numerically the interference volume. The process damping coefficients are then estimated by minimization of the error between measured cutting force and the simulated cutting forces
Chen, Shouyi. « Caractérisation de la dynamique de coupe en usinage ». Compiègne, 1996. http://www.theses.fr/1996COMPD904.
Texte intégralLadonne, Mathieu. « Modélisation du procédé de perçage assisté par vibrations forcées : prise en compte de l’environnement Pièce-Outil-Machine ». Thesis, Paris, ENSAM, 2016. http://www.theses.fr/2016ENAM0006.
Texte intégralVibrations assisted drilling is a process which ensures chip shape control in order to increase reliability during drilling operations. The adding of axial oscillation, controlled with amplitude and frequency, introduce two new parameters which must determinate according to the conventional parameters (feed and speed rotation). The optimal setting of vibrations assisted drilling is not obvious. To provide an optimization-tool of the process, a new model which take into account the “Tool-Workpiece-Machine” environment, is proposed. Drill geometry, Tool-Workpiece interactions and dynamic behavior of the Machine are incorporated in the model. Tis specificity allows adjusting behavior of the process with the case of application. An identification methodology is presented to characterize the environment. Simulation’s results and experimental results are compared to validate the model. This model thus allows predicting process behavior in order to optimize the operational parameters
Belguith, Rami. « Effets du comportement de la machine et des paramètres d'usinage sur la topographie des surfaces obtenues par fraisage à grande vitesse avec des fraises à bout sphérique monoblocs ». Thesis, Toulouse, INPT, 2019. http://www.theses.fr/2019INPT0127.
Texte intégralThe optimization of the cutting parameters in high-speed machining requires the consideration of the machining errors in the modeling of the cutting forces and the surface topography. Therefore, the present study deals with the analysis of the effect of cutting parameters and machining errors on the surface topography of milled surfaces with a ball-end mill. The tool geometry was modeled taking into account all the machining errors such as runout, bending, vibrations and wear. Then, the Cutter Workpiece Engagement region 'CWE ', the cutting width and the uncut chip thickness were modeled taking into account the trace of the previous tooth. Subsequently, thermomechanical modeling of cutting forces in the milling process with a ball-end tool is made considering these errors. Finally, an analysis of the topography according to all these parameters and machining errors was carried out based on experimental validation
Kibbou, El Mehdi. « Contribution à la modélisation thermomécanique des vibrations en coupe oblique et à l'établissement d'un plan optimal de maintenance intégré à la production tenant compte des conditions d'usinage ». Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0234.
Texte intégralIn this study, we are interested in a machining production system which is one of the manufacturing processes most adopted by the various mechanical industries (automotive, aviation…etc.). The objective of this multidisciplinary thesis (Mechanics and Industrial Engineering) is double: (1) the development of a new thermomechanical model of oblique cutting in dry machining and (2) the maximization of profit in order to establish a strategy production and a preventive maintenance plan.The coupling between the machining operation and the part "simultaneous optimization of production and maintenance costs" is done by considering the effect of cutting conditions on the generated surface quality and on the tool wear. In the proposed approach, wear is taken into account through Taylor's empirical law and the machined surface quality is predicted via a new model of vibrations in oblique cutting.The first objective of this work concerns the development of a new thermomechanical model of the oblique cutting with vibration. In this analytical cutting model, the vibratory system is assimilated to a system with a single degree of freedom in the tool feed direction. We take into account the coupling between tool oscillations, the thermomechanical process of chip formation as well as the regenerative effect. The latter results from the variation in the material quantity to be machined between two successive passes. The coupling between all of these mechanisms makes the problem to be solved strongly nonlinear. A resolution algorithm making it possible to reduce the computation time has been implemented.The second objective of the thesis is achieved through the development of an analytical model where the optimization consists in maximizing a profit integrating selling price of finished product, production and maintenance costs. We note the originality of this part consists in considering the impact of the machining conditions, especially the cutting speed, on the production durations and costs, the quality of the machined parts as well as the degradation of the production system. The impact of machining conditions on three fundamental aspects is therefore considered simultaneously for the "simultaneous optimization of production and maintenance costs" part. The first concerns the impact of machining conditions on production time and costs. The second concerns the impact on the degradation of the machining system and therefore on the optimal maintenance plan to be adopted. The third concerns the impact on the quality of the output product which directly affects the selling costs and more specifically the total profit. These interactions are taken into account through the development of an analytical model to establish an optimal integrated production maintenance plan for the machining system, illustrated by the optimal switching date for changing cutting speed and the optimal numbers of batches to produce before every preventive maintenance action for every production phase. Every production phase is characterized by a cutting speed
Castro, Martinez Luis Ricardo. « Identification des sources de vibration en usinage : étude expérimentale et numérique ». Metz, 2006. http://docnum.univ-lorraine.fr/public/UPV-M/Theses/2006/Castro_Martinez.Luis_Ricardo.SMZ0624.pdf.
Texte intégralThe main objective of this project is furnishing information to clarify the vibrations physics in machining from orthogonal cutting. First chapter contains the machining process characterisation by means of cutting forces. We evaluate the piezoelectric dynamometers in frequency domain and the influence of assembly components. These evaluations reveal the dynamic measurements problems. At the end of this part, we propose a correction method of piezoelectric dynamometer measurements to frequencies higher than dynamometer bandwidth. Also, we present an application of the method. Second chapter comprises the understanding of vibration sources. We analyse specially the segmented chip formation because its excitation role is not clear in literature. Also, we consider the effects of regenerative excitations, which depend of interaction between cutting conditions and machine-tool dynamic response. Third chapter includes the experimental identification of vibration sources during machining. We have identified and characterized the segmented chip formation and the machine-tool dynamic
Livres sur le sujet "Coupe – Vibrations"
Patently Erotic : Tear-Away Bras, Couple¿s Chairs, Vibrating Condoms, and Patented Strokes of Genius. Plume, 2005.
Trouver le texte intégralChapitres de livres sur le sujet "Coupe – Vibrations"
Awrejcewicz, Jan, Anton V. Krysko, Maxim V. Zhigalov et Vadim A. Krysko. « Thermoelastic Vibrations of Timoshenko Microbeams (Modified Couple Stress Theory) ». Dans Advanced Structured Materials, 295–332. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-55993-9_8.
Texte intégralMızrak, Sinem, et Ender Ciğeroğlu. « Nonlinear Free Vibrations of Functionally Graded Microplates Based on the Modified Couple Stress Theory ». Dans NODYCON Conference Proceedings Series, 395–405. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-81170-9_35.
Texte intégralXia, Yuanfeng, Jian Pang, Chengtai Hu, Cui Zhou et Zhijun Zhang. « Study on Second-Order Vibration Caused by Secondary Couple of Cardan Joint for a 4WD Driveline ». Dans Lecture Notes in Electrical Engineering, 345–53. Berlin, Heidelberg : Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45043-7_36.
Texte intégralThanh, Cuong-Le, Samir Khatir et M. Abdel Wahab. « Free Vibration of Angle-Ply Laminated Micro-plates Using Isogeometric Analysis and Modified Couple Stress Theory ». Dans Lecture Notes in Mechanical Engineering, 844–52. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8331-1_67.
Texte intégralBhattacharya, Sujash, et Debabrata Das. « A Study on Free Vibration Behavior of Microbeam Under Large Static Deflection Using Modified Couple Stress Theory ». Dans Lecture Notes in Mechanical Engineering, 155–64. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0772-4_14.
Texte intégralBalkanski, M., et R. F. Wallis. « Lattice vibrations in semiconductors ». Dans Semiconductor Physics and Applications, 121–52. Oxford University PressOxford, 2000. http://dx.doi.org/10.1093/oso/9780198517412.003.0007.
Texte intégralZhou, H.-J., Q.-B. Li et F.-M. Wang. « Boundary Element Method for Couple D Vibration Analysis of Dam-Water System ». Dans Structures and Stochastic Methods, 189–96. Elsevier, 1987. http://dx.doi.org/10.1016/b978-0-444-98955-0.50019-7.
Texte intégralMcCabe, Susan. « Cold War Romances ». Dans H. D. & ; Bryher, 281–95. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780190621223.003.0022.
Texte intégralMachover, Wilma, et Marienne Uszler. « Choosing an Instrument ». Dans Sound Choices, 163–204. Oxford University PressNew York, NY, 1996. http://dx.doi.org/10.1093/oso/9780195092073.003.0005.
Texte intégralActes de conférences sur le sujet "Coupe – Vibrations"
De Santiago, Oscar, et Luis San Andrés. « Dynamic Response of a Rotor-Integral Squeeze Film Damper to Couple Imbalances ». Dans ASME Turbo Expo 2000 : Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0388.
Texte intégralHohl, Andreas, Christian Siewert, Lars Panning et Andreas Kayser. « Nonlinear Vibration Analysis of Gas Turbine Bladings With Shroud Coupling ». Dans ASME Turbo Expo 2008 : Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-50787.
Texte intégralBachschmid, N., S. Bistolfi, S. Chatterton, M. Ferrante et E. Pesatori. « Some Remarks on the Dynamic Behaviour of Integrally Shrouded Blade Rows ». Dans ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48320.
Texte intégralChauhan, Abhishek, Pritam Rout et Ksh Milan Singh. « Vibration Parameters Estimation using mHDFT Filter in PLL Technique ». Dans 2020 International Conference on Computational Performance Evaluation (ComPE). IEEE, 2020. http://dx.doi.org/10.1109/compe49325.2020.9200039.
Texte intégralFernandes, Antonio Carlos, Sina Mirzaei Sefat, Luis Victor Casca˜o, Pedro Vilas Boas et Ricardo Francis. « Further Investigations on Vortex Self Induced Vibration (VSIV) ». Dans ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-50187.
Texte intégralGequn, Shu, Wei Jingsi, Wei Haiqiao et Chen Xinwei. « Research on Couple Mechanism of Heat Release and Acoustic Characteristics during Combustion of Butane in Close Chamber ». Dans SAE 2007 Noise and Vibration Conference and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2007. http://dx.doi.org/10.4271/2007-01-2175.
Texte intégralMarek, Sikoń. « Use of Cosserat birefringence to measurement couple stresses by photoelasticity ». Dans 11TH INTERNATIONAL CONFERENCE ON VIBRATION MEASUREMENTS BY LASER AND NONCONTACT TECHNIQUES - AIVELA 2014 : Advances and Applications. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4879574.
Texte intégralBlanchet, Pat, et Harvey Lipkin. « Dual Properties for Vibration Analysis via Screw Theory ». Dans ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/mech-5868.
Texte intégralPol, P. Santamarina. « Dynamic and Static Design of Engine Test Benches ». Dans ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0306.
Texte intégralSong, Guochenhao, Zhuang Mo et J. Stuart Bolton. « A Transfer-Matrix-Based Approach to Predicting Acoustic Properties of a Layered System in a General, Efficient, and Stable Way ». Dans Noise and Vibration Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-01-1052.
Texte intégral