Littérature scientifique sur le sujet « Coordinates Measuring Machines (CMM) »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Coordinates Measuring Machines (CMM) ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Coordinates Measuring Machines (CMM)"
Hamana, Hiroyuki, Mitsushi Tominaga, Miyu Ozaki et Ryoshu Furutani. « Calibration of Articulated Arm Coordinate Measuring Machine Considering Measuring Posture ». International Journal of Automation Technology 5, no 2 (5 mars 2011) : 109–14. http://dx.doi.org/10.20965/ijat.2011.p0109.
Texte intégralPhimpisan, Phaireepinas, et Chatchapol Chungchoo. « A Best Practice Guideline for Inspecting Precision Machined Parts by Using Several Coordinate Measuring Machines (CMMs) ». Applied Mechanics and Materials 894 (septembre 2019) : 90–95. http://dx.doi.org/10.4028/www.scientific.net/amm.894.90.
Texte intégralDhoska, Klodian, Toomas Kübarsepp, Altin Dorri et Agus Pramono. « Metrological Overview for Coordinate Measuring Machines ». Applied Mechanics and Materials 771 (juillet 2015) : 195–99. http://dx.doi.org/10.4028/www.scientific.net/amm.771.195.
Texte intégralNouri, Mahtab, Arash Farzan, Ali Reza Akbarzadeh Baghban et Reza Massudi. « Comparison of clinical bracket point registration with 3D laser scanner and coordinate measuring machine ». Dental Press Journal of Orthodontics 20, no 1 (février 2015) : 59–65. http://dx.doi.org/10.1590/2176-9451.20.1.059-065.oar.
Texte intégralLin, Psang Dain, et Jung-Fa Hsieh. « Dimension Inspection of Spatial Cams by CNC Coordinate Measuring Machines ». Journal of Manufacturing Science and Engineering 122, no 1 (1 février 1999) : 149–57. http://dx.doi.org/10.1115/1.538894.
Texte intégralMorimoto, Yoshitaka, Keisuke Nakato et Motoshi Gontani. « Accuracy Evaluation of 5-Axis Machining Center Based on Measurements of Machined Workpiece – Evaluation of Accuracy of 5-Axis Controlled Machining Center – ». International Journal of Automation Technology 6, no 5 (5 septembre 2012) : 675–81. http://dx.doi.org/10.20965/ijat.2012.p0675.
Texte intégralWatanabe, M., et Ryoshu Furutani. « Development of a Sensitive Probe for Coordinate Measuring Machines ». Key Engineering Materials 295-296 (octobre 2005) : 325–30. http://dx.doi.org/10.4028/www.scientific.net/kem.295-296.325.
Texte intégralPahk, H. J., M. Burdekin et G. N. Peggs. « Development of virtual coordinate measuring machines incorporating probe errors ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture 212, no 7 (1 juillet 1998) : 533–48. http://dx.doi.org/10.1243/0954405981515833.
Texte intégralChen, Long, Tingting Ren, Lei Tao, Jun Xiong et Chunyan Gu. « Discussion on Fast Calibration Method of Coordinate Measuring Machine ». Journal of Physics : Conference Series 2206, no 1 (1 février 2022) : 012001. http://dx.doi.org/10.1088/1742-6596/2206/1/012001.
Texte intégralHuang, Feng Shan, et Li Chen. « CCD Camera Calibration Technology Based on the Translation of Coordinate Measuring Machine ». Applied Mechanics and Materials 568-570 (juin 2014) : 320–25. http://dx.doi.org/10.4028/www.scientific.net/amm.568-570.320.
Texte intégralThèses sur le sujet "Coordinates Measuring Machines (CMM)"
Bittle, Steven Douglas. « An active piezoelectric probe for precision measurement on a coordinate measuring machine (CMM) ». Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/18186.
Texte intégralRugbani, Ali Milud. « The design, kinematics and error modelling of a novel micro-CMM parallel manipulator ». Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86518.
Texte intégralENGLISH ABSTRACT: The research presented in this dissertation establishes a micro-CMM parallel manipulator as a viable positioning device for three degree of freedom micro measurement applications. The machine offers the advantages associated with parallel kinematic manipulators, such as light carrying weight, high stiffness and no accumulation of errors, while avoiding some of the traditional disadvantages of parallel manipulators such as the associated effects of angular errors (Abbé error), singularity problems, work space limitation and the extensive use of spherical joints. In this dissertation, the direct position kinematic solution is developed analytically and the solution of the inverse position kinematic is solved numerically. A workspace analysis has been performed. A fully functional prototype demonstrator is fabricated to demonstrate this machine. While the demonstrator was not intended to achieve submicron accuracy, it was intended to validate the error models. Computer controlled measurement is developed and used to position the probe and to record measurements. A reliable kinematic error model based on the theory of error propagation is derived analytically. A numerical method is used to verify the analytical results. Comparison shows that the results of the error model, both analytical and numerical, represent a very good match and follow the same trend. The kinematic position model is validated using a conventional CMM. Results show that an average difference of less than 0.5 mm over a set of 30 points is achieved. This result of the micro-CMM demonstrator measurements falls within the error budget of approximately 0.75 mm estimated by the proposed analytical error model.
AFRIKAANSE OPSOMMING: Die navorsing in hierdie tesis vestig ‘n mikro-CMM parallelle manipuleerder as ‘n lewensvatbare posisioneringstoestel vir drie vryheidsgraad-mikrometing toepassings. Die masjien bied voordele geassosieer met parallelle kinematiese manipuleerders, bv. ligte dra-gewig, hoë styfheid en geen ophoping van foute nie. Die tradisionele nadele van parallelle manipuleerders soos die geassosieerde gevolge van hoekfoute (Abbé fout), enkelvoudigheidsprobleme, werkspasiebeperking en die uitgebreide gebruik van sferiese koppelings word vermy. In hierdie tesis word die direkte posisie kinematiese oplossing analities ontwikkel en die oplossing van die omgekeerde posisie kinematies word numeries opgelos. ‘n Werkspasie analise is uitgevoer. ‘n Ten volle funksionele prototipe demonstrasie-model is vervaardig om hierdie masjien te demonstreer. Die model is nie vervaardig om submikron akkuraatheid te bereik nie, maar eerder om foutmodelle geldig te verklaar. Rekenaar-beheerde metings is ontwerp en gebruik om die toetspen te posisioneer en om metings te neem. ‘n Betroubare kinematiese foutmodel gebaseer op die teorie van foutvoortplanting is analities afgelei. ‘n Numeriese metode word gebruik om die analitiese resultate te bevestig. Vergelyking toon aan dat die resultate van die foutmodel, beide analities en numeries, goeie pasmaats is en dieselfde tendens volg. Die kinematiese posisie model word geldig verklaar deur gebruik te maak van ‘n konvensionele CMM. Resultate wys dat daar ‘n gemiddelde verskil van minder as 0.5 mm oor ‘n stel van 30 punte behaal word. Die resultate van die mikro-CMM model se metings val binne die foutbegroting van ongeveer 0.75 mm geskat by die voorgestelde analitiese foutmodel.
Baird, Patrick James Samuel. « Mathematical modelling of the parameters and errors of a contact probe system and its application to the computer simulation of coordinate measuring machines ». Thesis, Brunel University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320548.
Texte intégralArencibia, Rosenda Valdés. « Equacionamento das componentes do erro volumétrico em máquinas de medir a três coordenadas ». Universidade de São Paulo, 1999. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-18092015-161256/.
Texte intégralThe accuracy and the repeatability of measurements of Three Coordinates Measuring Machines (CMM) are affected by several errors. Among them, geometrical errors are the most influents in the most experimental cases. The result of geometric errors combination in each of the preferentials directions is denominated of volumetric error components. Thus, its possible to know the existent relationship between coordinates of measured points and volumetric error components. Several methods have been proposed to model the behavior of the volumetric error in CMM as a function of the X, Y and Z coordinates. However, sofar from experimental measurements of the volumetric error has bem proposed mathematical model for the descriptions and characterizations of errors was obtained. In this work is presented a general methodology to obtain a mathematical equation and prediction of them components of the volumetric errors, using multiple regression. The methodology was applied at a of \"Moving Bridge\" CMM type. Were obtained three regression equations, one for each component of the error, starting from data collected by direct calibration, specifically by the divided volume method. The model was evaluated statistically. The simulated results were evaluated, discussed and compared with the results obtained through the ball bar calibration, showing an excellent capacity of the model in the prediction of the volumetric error of the machine. Besides was made the compensation of the volumetric error in two diagonals of the working volume of the appraised machine using the proposed model, in this case the error was minimized sensibly.
Avvari, Ddanukash. « A Literature Review on Differences Between Robotic and Human In-Line Quality Inspection in Automotive Manufacturing Assembly Line ». Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-56038.
Texte intégralHájková, Alena. « Návrh interní metodiky pro měření výrobků a dílů na přístroji CMM UPMC Zeiss na pracovišti ČMI Brno ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417433.
Texte intégralMarques, Alessandro. « Uma interface eletrônica e computacional para medições a três coordenadas ». Universidade de São Paulo, 2003. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-18122015-143939/.
Texte intégralSince the advent Coordinate Measuring Machines (CMMs) have improved substantially. However, only a small number of structural modifications were observed. Nowadays, considerable capital expenditure is needed to keep CMM builders competitive. Most important research fields concern structural material and production of more flexible and versatile software. The electronic system and the software used during measurement with CMM are rigid and inaccessible and no user modification is permitted. Typical examples are the predetermined software features and curve fitting methods used on the magnitudes definition process. This research aims to exhibit an interface that copes with the system stiffness and enables signal acquisition from the scales of the CMM, allowing the development of new types softwares. The proposed system was implemented on a moving bridge type CMM. A program that uses the values of the coordinate points obtained from the CMM work volume was created. The software MaqMed 2000 performs the compensation of the coordinates of the used points by means of synthesized errors equations. Evaluation of the performance of the built device was carried out using MaqMed 2000 in practical situations. Data sets were collected along the profile of artefacts and fitted by means of two routines, one with error compensation and the other not compensated. Artefacts were measured in several locations in the whole volume of the CMM. The proximity between the compensated and noncompensated results with respect to the calibrated artefact value was examined. The developed system allowed for error compensation of 98% for bi-dimensional compensation and 87% for tri-dimensional compensation.
Marques, Alessandro. « A correlação entre os erros de retilineidade e angulares nas máquinas de medir a três coordenadas ». Universidade de São Paulo, 1999. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-18122015-111301/.
Texte intégralThe metrological performance of a Three Coordinate Measuring Machines (CMM) is related to the capacity of measuring workpieces with a required precision. As every measurement instrument, these machines undergo the effects of internal and external factors that affect the measurement, generating what has been denominated as volumetric errors. Such errors can be obtained through a mathematical model that simulates how the individual errors of the CMM are combined and propagated to any point within the machine working volume. Usually, the independence among the individual errors is adopted when the machine error model is built. However, if the machine geometry is analyzed, the dependence between the straightness error and the angular error can be noted. The objective of this work is to express the angular error as a function of the straightness error. The formulation proposed in this work to express this correlation minimizes the number of calibrations necessary to evaluate the machine behavior. A Brown & Sharp Moving Bridge Coordinate Measuring Machine was used for the experimental evaluation. With this data set and knowing the machine geometry, a mathematical expression relating straightness and angular error was obtained. The calculated error values were then compared with the errors experimentally measured.
Sozak, Ahmet. « Uncertainty Analysis Of Coordinate Measuring Machine (cmm) Measurements ». Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/2/12608887/index.pdf.
Texte intégralRICCI, FRANCESCO. « Effective Product Lifecycle Management : the role of uncertainties in addressing design, manufacturing and verification processes ». Doctoral thesis, Politecnico di Torino, 2012. http://hdl.handle.net/11583/2501694.
Texte intégralLivres sur le sujet "Coordinates Measuring Machines (CMM)"
Chikurov, Nikolay. Mathematical problems of coordinate measuring machines. ru : INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1163946.
Texte intégralW, Caskey G., et National Institute of Standards and Technology (U.S.), dir. A users' guide to NIST SRM 2084 : CMM probe performance standard. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1994.
Trouver le texte intégralAlbert, Horst John, et National Institute of Standards and Technology (U.S.), dir. A comparison of the CMM-driver specification release #1.9 with the I++ DME-interface release 0.9. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, Intelligent Systems Division, National Institute of Standards and Technology, 2002.
Trouver le texte intégralAlbert, Horst John, et National Institute of Standards and Technology (U.S.), dir. A comparison of the CMM-driver specification release #1.9 with the I++ DME-interface release 0.9. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, Intelligent Systems Division, National Institute of Standards and Technology, 2002.
Trouver le texte intégralJohn, Horst, et National Institute of Standards and Technology (U.S.), dir. A comparison of the CMM-driver specification release #1.9 with the I++ DME-interface release 0.9. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, Intelligent Systems Division, National Institute of Standards and Technology, 2002.
Trouver le texte intégralAlbert, Horst John, et National Institute of Standards and Technology (U.S.), dir. A comparison of the CMM-driver specification release #1.9 with the I++ DME-interface release 0.9. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, Intelligent Systems Division, National Institute of Standards and Technology, 2002.
Trouver le texte intégralBillibon, Yoshimi, et National Institute of Standards and Technology (U.S.), dir. Integrated vision and touch sensing for CMMs. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.
Trouver le texte intégralHarvie, A. The intercomparison of three-dimensional measurements taken from coordinate measuring machines (CMMs). Luxembourg : Commission of the European Communities, 1985.
Trouver le texte intégralA comparison of the CMM-driver specification release #1.9 with the I++ DME-interface release 0.9. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, Intelligent Systems Division, National Institute of Standards and Technology, 2002.
Trouver le texte intégralA comparison of the CMM-driver specification release #1.9 with the I++ DME-interface release 0.9. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, Intelligent Systems Division, National Institute of Standards and Technology, 2002.
Trouver le texte intégralChapitres de livres sur le sujet "Coordinates Measuring Machines (CMM)"
Gąska, Adam, Wiktor Harmatys, Piotr Gąska, Maciej Gruza et Jerzy Sładek. « Validation of Virtual CMM-Based Method for Uncertainty Estimation of Measurements Performed on Five-Axis Coordinate Measuring Machines ». Dans Lecture Notes in Mechanical Engineering, 39–46. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-18177-2_4.
Texte intégralMorales, Edith Obregón, José de Jesús Pérez Bueno, Juan Carlos Moctezuma Esparza, Diego Marroquín García, Arturo Trejo Pérez, Roberto Carlos Flores Romero, Juan Manuel Olivares Ramírez et al. « 3D Scanning and Simulation of a Hybrid Refrigerator Using Photovoltaic Energy ». Dans Encyclopedia of Information Science and Technology, Fourth Edition, 1277–96. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-2255-3.ch110.
Texte intégralMorales, Edith Obregón, José de Jesús Pérez Bueno, Juan Carlos Moctezuma Esparza, Diego Marroquín García, Arturo Trejo Pérez, Roberto Carlos Flores Romero, Juan Manuel Olivares Ramírez et al. « 3D Scanning and Simulation of a Hybrid Refrigerator Using Photovoltaic Energy ». Dans Advanced Methodologies and Technologies in Artificial Intelligence, Computer Simulation, and Human-Computer Interaction, 312–36. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-7368-5.ch024.
Texte intégralActes de conférences sur le sujet "Coordinates Measuring Machines (CMM)"
Morse, Edward P. « Interim testing strategies for Coordinate Measuring Machines ». Dans NCSL International Workshop & Symposium. NCSL International, 2013. http://dx.doi.org/10.51843/wsproceedings.2013.58.
Texte intégralLee, Dennis W. K., Francis S. Y. Wong et C. K. Fung. « Calibration of Coordinate Measuring Machines Meeting the Requirements of ISO 10360-2:2009 at the Standards and Calibration Laboratory ». Dans NCSL International Workshop & Symposium. NCSL International, 2013. http://dx.doi.org/10.51843/wsproceedings.2013.24.
Texte intégralBarakat, Nael A., et Mohamed A. Elbestawi. « Detection, Modelling, and Compensation of Geometric Errors in Coordinate Measuring Machines ». Dans ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1073.
Texte intégralMorse, Edward. « Accreditation for Dimensional Testing With Coordinate Measuring Machines ». Dans NCSL International Workshop & Symposium. NCSL International, 2015. http://dx.doi.org/10.51843/wsproceedings.2015.30.
Texte intégralAlbuquerque, V. A., F. W. Liou, S. Agarwal et O. R. Mitchell. « Automatic Coordinate Measuring Machine Inspection ». Dans ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8700.
Texte intégralDong, Chensong, Chuck Zhang, Ben Wang et Guoxiong Zhang. « Dynamic Error Prediction and Compensation of Coordinate Measuring Machines ». Dans ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1790.
Texte intégralAggogeri, Francesco, Emanuele Barini et Raffaello Levi. « CMM Measurement Variability Analysis : A Comparison Between Two Metrological Laboratories Measuring Three Industrial Workpieces ». Dans ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59307.
Texte intégralElMaraghy, W. H., Z. Wu et H. A. ElMaraghy. « Evaluation of Actual Geometric Tolerances Using Coordinate Measuring Machine Data ». Dans ASME 1989 Design Technical Conferences. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/detc1989-0037.
Texte intégralSubramanian, Rajesh, H. James de St. Germain et Samuel Drake. « Integrating a Vision System With a Coordinate Measuring Machine to Automate the Datum Alignment Process ». Dans ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-85455.
Texte intégralMachado, Michael, João Silva, João Sousa et André Filipe Pinto Vale. « The Evolution of Tridimensional Metrology : The Era of Computer Aided Metrology ». Dans ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11600.
Texte intégralRapports d'organisations sur le sujet "Coordinates Measuring Machines (CMM)"
Johnston, Derek. Installation and Implementation of an In-Process Coordinate Measuring Machine (CMM). Office of Scientific and Technical Information (OSTI), juin 2008. http://dx.doi.org/10.2172/952956.
Texte intégralSinger, A. T., J. L. Land, S. D. Phillips, D. Sawyer, B. Borchardt, G. Caskey, D. Ward, P. Snoots et B. Faust. Interim testing artifact (ITA), a performance evaluation system for coordinate measuring machines (CMMs) :. Gaithersburg, MD : National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5602.
Texte intégral