Bibliographies thématiques / CONTROL SIGNAL / Articles de revues

Articles de revues sur le sujet « CONTROL SIGNAL »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : CONTROL SIGNAL.
Auteur : Grafiati
Publié le 11 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « CONTROL SIGNAL ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Shellenberger, Richard O., et Paul Lewis. « Signal Control by Six Signals ». Psychological Reports 63, no 1 (août 1988) : 311–18. http://dx.doi.org/10.2466/pr0.1988.63.1.311.

Texte intégral
Résumé :
In previous signal-control experiments, several types of stimuli elicited pecking when paired with peck-contingent grain. Here, we compared the effectiveness of an auditory stimulus and five visual stimuli. For 12 pigeons, the first keypeck to follow the offset of a 4-sec. signal was reinforced with grain. We examined the following signals: a tone, a white keylight, a dark keylight, a keylight that changed from white to red, houselight onset, and houselight offset. All signals acquired strong control over responding. According to one measure, percent of signals with a peck, houselight offset showed less control than the others; according to another measure, pecking rate, the white keylight showed greater control than the others. In this experiment, we found that a wide variety of stimuli can elicit strong pecking in the signal-control procedure. The present findings increase the chances that in past conditioning experiments, some keypecks thought to be due to contingencies of reinforcement were in fact elicited.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Logan, Gordon D., Russell J. Schachar et Rosemary Tannock. « Impulsivity and Inhibitory Control ». Psychological Science 8, no 1 (janvier 1997) : 60–64. http://dx.doi.org/10.1111/j.1467-9280.1997.tb00545.x.

Texte intégral
Résumé :
We report an experiment testing the hypothesis that impulsive behavior reflects a deficit in the ability to inhibit prepotent responses Specifically, we examined whether impulsive people respond more slowly to signals to inhibit (stop signals) than non-impulsive people In this experiment, 136 undergraduate students completed an impulsivity questionnaire and then participated in a stop-signal experiment, in which they performed a choice reaction time (go) task and were asked to inhibit their responses to the go task when they heard a stop signal The delay between the go signal and the stop signal was determined by a tracking procedure designed to allow subjects to inhibit on 50% of the stop-signal trials Reaction time to the go signal did not vary with impulsivity, but estimated stop-signal reaction time was longer in more impulsive subjects, consistent with the hypothesis and consistent with results from populations with pathological problems with impulse control
Styles APA, Harvard, Vancouver, ISO, etc.
3

Lacefield, Soni, et Nicholas Ingolia. « Signal Transduction : External Signals Influence Spore-Number Control ». Current Biology 16, no 4 (février 2006) : R125—R127. http://dx.doi.org/10.1016/j.cub.2006.02.005.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mulung, Bibi Rawiyah, et Andino Maseleno. « Proposed SMART Traffic Control Signal in Brunei Darussalam ». TELKOMNIKA Indonesian Journal of Electrical Engineering 15, no 2 (1 août 2015) : 277. http://dx.doi.org/10.11591/tijee.v15i2.1540.

Texte intégral
Résumé :
This paper presents proposed SMART (Systematic Monitoring of Arterial Road Traffic Signals) traffic control signal in Brunei Darussalam. Traffic congestion due to stops and delays at traffic light signals has much been complained about in Brunei Darussalam as well as across the world during the recent years. There are primarily two types of traffic signal controls in Brunei Darussalam. The most common one is the fixed or pre-timed signal operation traffic light and the other one is the actuated signal operation traffic light. Although the actuated signal control is more efficient than the fixed or pre-fixed signal control in the sense that it provides fewer stops and delays to traffic on the major arteries, the best option for Brunei Darussalam would be to introduce smart traffic control signal. This type of traffic signal uses artificial intelligence to take the appropriate action by adjusting the times in real time to minimise the delay in the intersection while also coordinating with intersections in the neighbourhood. SMART Signal simultaneously collects event-based high-resolution traffic data from multiple intersections and generates real-time signal performance measures, including arterial travel time, number of stops, queue length, intersection delay, and level of service. In Brunei Darussalam, where we have numerous intersections where several arterial roads are linked to one another, The SMART signal traffic control method should be implemented.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Polushin, P. A., O. R. Nikitin et I. R. Dubov. « Quasioptimal control in diversed signal transmission ». IOP Conference Series : Materials Science and Engineering 1227, no 1 (1 février 2022) : 012003. http://dx.doi.org/10.1088/1757-899x/1227/1/012003.

Texte intégral
Résumé :
Abstract To increase the noise immunity of signal transmission, diversity methods are now widely used, consisting in obtaining and combining several copies of the transmitted signal. In this case, it is possible to perform a combination either before the detection procedure or after it. If you do not take into account the possible use of non-linear types of modulation, then the pre-detector combination always has advantages over the post-detector combination. However, taking into account the nonlinear properties of the transmitted signals, new possibilities appear for increasing the noise immunity in combination and simplifying the processing. In the case of using analog signals, in particular frequency modulation, at certain points in time, the pre-detection combination can lose to the post-detection combination. At the same time, by combining pre-detector and post-detector combining circuits, it is possible to lower the threshold level during demodulation and increase noise immunity. In the case of using digital modes of modulation, it is possible to process only the signals after demodulation without reducing the noise immunity and to eliminate the need for preliminary phasing of the diversity signals before detection.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Schlessinger, J. « SIGNAL TRANSDUCTION : Autoinhibition Control ». Science 300, no 5620 (2 mai 2003) : 750–52. http://dx.doi.org/10.1126/science.1082024.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Azhar, Al-Mudhaffar, et Berg Svante. « Signal Control of Roundabouts ». Procedia - Social and Behavioral Sciences 16 (2011) : 729–38. http://dx.doi.org/10.1016/j.sbspro.2011.04.492.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Zhao, Lin. « Numerical Control Lathe Cutting Force Signal On-Line Monitoring Design ». Applied Mechanics and Materials 711 (décembre 2014) : 329–32. http://dx.doi.org/10.4028/www.scientific.net/amm.711.329.

Texte intégral
Résumé :
The main research direction of Numerical control lathe cutting force signal on-line monitoring is to process real-time monitoring, using the sensor, charge amplifier, video acquisition card and computer to collect data and signal. Signal acquisition makes use of the piezoelectric sensor signals and send them to the computer in order to acquire the real-time data and display the dynamic signal so that monitor the process. Signal processing is the course that data will be collected for subsequent processing and analyzing. It includes display, filtering, correlation analysis, spectral analysis, etc. We can conclude the signal’s characteristics after the time domain and frequency domain analysis of signals.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Huang, Kun, Wei Cai Peng, Zhi Xiong Huang, Min Xian Shi et Guang Bing Wan. « Research of the Piezoelectric Composite Active Control ». Advanced Materials Research 1030-1032 (septembre 2014) : 1513–16. http://dx.doi.org/10.4028/www.scientific.net/amr.1030-1032.1513.

Texte intégral
Résumé :
Instantaneous signal and alternating signals are as driven signals, using PID control, change control coefficient P's size, The stopping time of impact force under instantaneous signal with the piezoelectric ceramic content increases, the stopping time is reduced; after applying active control, the stopping is shorter than that is not applied. After applying the alternating signal to force the cantilever beam, the driving effect of the ceramic sheet is located in a cantilever position A, B, C, the effect of C under controlling is at best. The effect of two driven ceramic sheets is better than that of three driven ceramic sheets, the best control position is B+C.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Pan, Fuquan, Lixia Zhang, Changxi Ma, Haiyuan Li, Jinshun Yang, Tao Liu, Fengyuan Wang et Shushan Chai. « Impact of Vehicular Countdown Signals on Driving Psychologies and Behaviors : Taking China as an Example ». Journal of Advanced Transportation 2017 (2017) : 1–11. http://dx.doi.org/10.1155/2017/5838520.

Texte intégral
Résumé :
Countdown signal control is a relatively new control mode that can inform a driver in advance about the remaining time to pass through intersections or the time needed to wait for other drivers and pedestrians. At present, few countries apply vehicular countdown signals. However, in China, some cities have applied vehicular countdown signals for years, though it is unclear how and how much such signals influence driving psychologies and behaviors compared with non-countdown signal controls. The present work aims to clarify the impact of vehicular countdown signals on driving psychologies and behaviors on the cognitive level. A questionnaire survey with 32 questions about driving psychologies and behaviors was designed, and an online survey was conducted. A total of 1051 valid questionnaires were received. The survey data were analyzed, and the main results indicate that most of the surveyed drivers prefer countdown signal controls and think that such controls can improve not only traffic safety but also traffic operational efficiency. The surveyed drivers also think that countdown signal controls have an impact on driving psychologies and behaviors and the survey results have demonstrated that the driving behaviors of female drivers surveyed are not conservative under the clear conditions of green countdown signal control. Further studies and methods concerning the effects of countdown signals on driving psychologies and behaviors are discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
11

Genders, Wade, et Saiedeh Razavi. « Evaluating Reinforcement Learning State Representations for Adaptive Traffic Signal Control ». International Journal of Traffic and Transportation Management 1, no 1 (10 juin 2019) : 19–26. http://dx.doi.org/10.5383/jttm.01.01.003.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

Prof. C.Y. Patil, Pallavi Mandhare, Dr Jyoti Yadav, Prof Vilas Kharat,. « Control and Coordination of Self-Adaptive Traffic Signal Using Deep Reinforcement Learning ». INFORMATION TECHNOLOGY IN INDUSTRY 9, no 1 (1 mars 2021) : 373–79. http://dx.doi.org/10.17762/itii.v9i1.141.

Texte intégral
Résumé :
The most observable obstacle to sustainable mobility is traffic congestions. These congestions cannot effectively be fixed by traditional control of traffic signals. Safe and smooth movement of traffic is ensured by a self-controlled traffic signal. As such, to coordinate the traffic flow it is necessary to implement dynamic traffic signal subsequences. Primarily, Traffic Signal Controllers (TSC) provides sophisticated control and coordination of vehicles. The control and coordination of traffic signal control systems can be effectively achieved by implementing the Deep Reinforcement Learning (DRL) approaches. The decision-making capabilities at intersections are improved by having variations of traffic signal timing using an adaptive TSC. Alternatively, the actual traffic demand is nothing but managing the traffic systems. It analyses the incoming number and type of vehicles and gives a real-time response at intersection geometrics and controls the traffic signals accordingly. The proposed DRL algorithm observes traffic data and operates optimum management plans for the regulation of the traffic flow. Furthermore, an existing traffic simulator is used to help provide a realistic environment to support the proposed algorithm.
Styles APA, Harvard, Vancouver, ISO, etc.
13

Табаков, Yu Tabakov, Лавлинский et V. Lavlinskiy. « TYPOLOGY LF SIGNAL ON ADAPTATION CONTROL SIGNALS FOR INTELLECTUAL SIMULATORS ». Modeling of systems and processes 7, no 4 (24 février 2015) : 38–41. http://dx.doi.org/10.12737/7906.

Texte intégral
Résumé :
The article considers the variety and amplitude-frequency characteristics of low-frequency signals. Considered experimental removal of the low-frequency signals from the cerebral cortex of a few healthy people to identify the control signals.
Styles APA, Harvard, Vancouver, ISO, etc.
14

Iwaki, Satoshi. « Acoustic signal transmission with insertion signal for machine control ». Journal of the Acoustical Society of America 119, no 6 (2006) : 3524. http://dx.doi.org/10.1121/1.2212609.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Yamamoto, Yutaka, Kaoru Yamamoto, Masaaki Nagahara et Pramod P. Khargonekar. « Signal processing via sampled-data control theory ». Impact 2020, no 2 (15 avril 2020) : 6–8. http://dx.doi.org/10.21820/23987073.2020.2.6.

Texte intégral
Résumé :
Digital sounds and images are used everywhere today, and they are all generated originally by analogue signals. On the other hand, in digital signal processing, the storage or transmission of digital data, such as music, videos or image files, necessitates converting such analogue signals into digital signals via sampling. When these data are sampled, the values from the discrete, sampled points are kept while the information between the sampled points is lost. Various techniques have been developed over the years to recover this lost data, but the results remain incomplete. Professor Yutaka Yamamoto's research is focused on improving how we can recover or reconstruct the original analogue data.
Styles APA, Harvard, Vancouver, ISO, etc.
16

Chen, Songhang, Chunlin Shang et Fenghua Zhu. « A Flexible Traffic Signal Coordinated Control Approach and System on Complicated Transportation Control Infrastructure ». Sensors 23, no 13 (21 juin 2023) : 5796. http://dx.doi.org/10.3390/s23135796.

Texte intégral
Résumé :
The transportation control infrastructure serves as the foundation for regional traffic signal control. However, in practice, this infrastructure is often imperfect and complex, characterized by factors such as heterogeneity and uncertainty, which pose significant challenges to existing methods and systems. Therefore, this paper proposes a novel approach to coordinated traffic signal control that emphasizes flexibility. To achieve this flexibility, we combine the flexible model of complex networks with robust fuzzy control methods. This approach enables us to overcome the complexity of the transportation control infrastructure and ensure efficient management of traffic signals. Additionally, to ensure long-term operational ease, we develop a regional traffic signal control system using steam computing technology, which provides high scalability and compatibility. Finally, computational experiments are performed to validate adaptability and performance of our proposed approach.
Styles APA, Harvard, Vancouver, ISO, etc.
17

Bagye, Wire. « Implementasi Jalur Komunikasi Global System Mobile (GSM) Untuk Kontrol Robot Jarak Jauh Berbasis Mikrikontroller Atmel89S52 ». Jurnal Informatika dan Rekayasa Elektronik 1, no 1 (3 mai 2018) : 1. http://dx.doi.org/10.36595/jire.v1i1.24.

Texte intégral
Résumé :
Some of the previous research builds controlled robots using devices with limited distance. The remote controlled robot controls the control distance along the rays of the sender's Infrared (IR) ray is not blocked by a 20 meters long Infrared (IR) receiver. The blue tooth controlled robot has a control distance of 40 meters. The controlled Robot Wireless Fidelity controls the maximum range of range specifications of the Access point range used. Maximum coverage ranges for outdoor access points as far as 15 Kilometers. The next research have to do with a longer distance control than previous research. In this research is Built a robot controlled by utilizes of the Global System Mobile (GSM) communication line. This project uses two Hand phones as a sender and the other one to become receiver. Hand phone sender function is sends control signal to receiver phone. Signals sent are DTMF signals (Dual Tone Multiple Frequency). There are 9 signals control with difference function. Those functions are (1) Turn left (2) Right turn (3) Left rewind (4) Right rewind (5) Rear left (6) Rear Right (7) Stop (8) Move forward (9) Move backward. On the mobile phone receiver signal DTMF in the form of analog signal is converted by Integrated Circuit (IC) MT8870p become Signal Digital. Digital signal from IC MT 8870p is used to be input of Atmel89s52 microcontroller. Atmel89s52 output has not been able to be used for DC motor drive signal so that used transistors amplifier to control the relays. Relay as an electronic switch to connect and disconnect the DC voltage to the motor so that the DC motor can be two-way. DC motors rotating clockwise and counterclockwise. This rotation is used as a robot movement. The research results shown that 9 DTMF key tones can be used to control the robot through the GSM line. Long of distance control as far as location that is accessible GSM signal from BTS (Base Transceiver Station). Further research needs to be done to transmit video signals so that it can be done long distance visual monitor on the movement of the robot.
Styles APA, Harvard, Vancouver, ISO, etc.
18

Bang, Yung-Jue. « Control of Signal Transduction Pathway ». Journal of the Korean Medical Association 41, no 8 (1998) : 824. http://dx.doi.org/10.5124/jkma.1998.41.8.824.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Inui, Masafumi, Graziano Martello et Stefano Piccolo. « MicroRNA control of signal transduction ». Nature Reviews Molecular Cell Biology 11, no 4 (10 mars 2010) : 252–63. http://dx.doi.org/10.1038/nrm2868.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

Hodgson, W. S. « Motorway Signal and Control Systems ». Measurement and Control 26, no 1 (février 1993) : 6–9. http://dx.doi.org/10.1177/002029409302600102.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

Hartong, Mark W., et Olga K. Cataldi. « Microprocessor Signal and Train Control ». Transportation Research Record : Journal of the Transportation Research Board 1943, no 1 (janvier 2006) : 25–30. http://dx.doi.org/10.1177/0361198106194300104.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

Guglielmi, Michel. « signal synthesis with precision control ». Signal Processing 86, no 10 (octobre 2006) : 2548–53. http://dx.doi.org/10.1016/j.sigpro.2006.02.012.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Niittymäki, Jarkko, et Matti Pursula. « Signal control using fuzzy logic ». Fuzzy Sets and Systems 116, no 1 (novembre 2000) : 11–22. http://dx.doi.org/10.1016/s0165-0114(99)00034-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
24

Mei, Fei, Zhihong Man et Xinghuo Yu. « Sliding mode control signal analysis ». IFAC Proceedings Volumes 32, no 2 (juillet 1999) : 4118–22. http://dx.doi.org/10.1016/s1474-6670(17)56702-6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Karin, Michael. « Signal transduction and gene control ». Current Opinion in Cell Biology 3, no 3 (juin 1991) : 467–73. http://dx.doi.org/10.1016/0955-0674(91)90075-a.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
26

Ottersten, Björn, Torsten Söderström et Bo Wahlberg. « Statistical signal processing and control ». Automatica 30, no 1 (janvier 1994) : 9. http://dx.doi.org/10.1016/0005-1098(94)90224-0.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Fanuc Ltd. « Video signal phase control circuit ». Displays 15, no 3 (juillet 1994) : 194. http://dx.doi.org/10.1016/0141-9382(94)90015-9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Hägglund, Tore. « Signal Filtering in PID Control ». IFAC Proceedings Volumes 45, no 3 (2012) : 1–10. http://dx.doi.org/10.3182/20120328-3-it-3014.00002.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Gao, Hongliang, Xiaoling Li, Chao Gao et Jie Wu. « Neural Network Supervision Control Strategy for Inverted Pendulum Tracking Control ». Discrete Dynamics in Nature and Society 2021 (23 mars 2021) : 1–14. http://dx.doi.org/10.1155/2021/5536573.

Texte intégral
Résumé :
This paper presents several control methods and realizes the stable tracking for the inverted pendulum system. Based on the advantages of RBF and traditional PID, a novel PID controller based on the RBF neural network supervision control method (PID-RBF) is proposed. This method realizes the adaptive adjustment of the stable tracking signal of the system. Furthermore, an improved PID controller based on RBF neural network supervision control strategy (IPID-RBF) is presented. This control strategy adopts the supervision control method of feed-forward and feedback. The response speed of the system is further improved, and the overshoot of the tracking signal is further reduced. The tracking control simulation of the inverted pendulum system under three different signals is given to illustrate the effectiveness of the proposed method.
Styles APA, Harvard, Vancouver, ISO, etc.
30

Hirsch, Scott M., et J. Q. Sun. « Control signal scheduling for active noise control systems ». Smart Materials and Structures 8, no 3 (1 juin 1999) : 315–23. http://dx.doi.org/10.1088/0964-1726/8/3/304.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
31

Qu, Feng Zhen, et Bao Cheng Lu. « Comparative Study of the Auto Electronic Control System ». Applied Mechanics and Materials 539 (juillet 2014) : 587–91. http://dx.doi.org/10.4028/www.scientific.net/amm.539.587.

Texte intégral
Résumé :
Based on mathematical principle of function interpolation we design dominant and recessive auto electronic control system. In order to compare the performance of the two systems, we design a control experiment of automobile electronic signals for these two systems. The system adopts the CAN bus control, the wheel speed and door signal use the 0001-0100 signal channel to control, oil pressure and fault signal use the 0100-1111 signal channel to control. From the testing results of two systems, the dominant auto electronic control system occupies 8 channels, which is far from the theoretical value; and the recessive control occupies only 2 channels, which is accord with the theoretical value. It provides the technical support for the design of automotive electronic control system
Styles APA, Harvard, Vancouver, ISO, etc.
32

Yu, Sen Bin, Yong Ju Hu, Xin Sheng He, Si Wei Yang et Xi Wen Chen. « Single-Line Traffic Lights Wireless Signal Control Device ». Applied Mechanics and Materials 178-181 (mai 2012) : 2721–24. http://dx.doi.org/10.4028/www.scientific.net/amm.178-181.2721.

Texte intégral
Résumé :
In the light of tunnel construction, traffic accidents, sudden geological disasters cause of single-line road conditions, designing a single-line road traffic lights wireless signal control device to solve the traffic congestion and the problem of low efficiency of traffic. The device uses wireless transceiver module to sent the signal what was got from the photoelectric sensor to the single-chip microcomputer, single chip microcomputer (SCM) processes switch signals, the last step is to control the traffic light state through the driver circuit. This paper expounds the wireless signal control device trickle structure, working principle, and technical index of the various components, and it puts forward the operation under a feasible solution.
Styles APA, Harvard, Vancouver, ISO, etc.
33

WANG, XINGYUAN, et MINGJUN WANG. « TRACKING CONTROL FOR A CLASS OF CHAOTIC SYSTEMS ». International Journal of Modern Physics B 22, no 12 (10 mai 2008) : 1977–84. http://dx.doi.org/10.1142/s0217979208039186.

Texte intégral
Résumé :
This paper presents a tracking control strategy for a class of chaotic systems. A general tracking controller is designed. It is proved theoretically that the error signal can exponentially converge to zero. Numerical simulations show that the controller can make the output signal track all kinds of reference signals. Besides, a better effect can be obtained via changing the control parameters properly.
Styles APA, Harvard, Vancouver, ISO, etc.
34

Ramos Fuentes, Germán Andrés, Josep Olm Miras et Ramón Costa Castelló. « A survey of repetitive control in varying frequency conditions ». Ingeniería e Investigación 31, no 2 (1 mai 2011) : 29–37. http://dx.doi.org/10.15446/ing.investig.v31n2.23462.

Texte intégral
Résumé :
Digital repetitive control is a strategy that allows tracking/ rejecting periodic signals. Repetitive controllers are designed assuming that the exogenous signal period is constant and known, its main drawback being the dramatic loss of performance when signal frequency varies. This paper reviews the most relevant proposals advanced for overcoming this problem.
Styles APA, Harvard, Vancouver, ISO, etc.
35

Zhu, Yu Tian, Hao Wu et Zhao Liu. « Development of Online Oil Control Valve Detection System ». Applied Mechanics and Materials 380-384 (août 2013) : 833–36. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.833.

Texte intégral
Résumé :
An online detecting system is developed to check the function of oil control valve. This system consists of hydraulic detecting platform, signal collecting, signal processing and upper computer. It uses a domestic controller as the main control unit and the control program is developed. The signal conditioning board and the software of upper computer within LabVIEW environment are developed. By using this system, the signals of all sensors can be collected, conditioned, displayed and recorded quickly. The application shows that this system has been proved with the characteristics of high speed, high automation and detection precision.
Styles APA, Harvard, Vancouver, ISO, etc.
36

Gartner, Nathan H., et Mohammed Al-Malik. « Combined Model for Signal Control and Route Choice in Urban Traffic Networks ». Transportation Research Record : Journal of the Transportation Research Board 1554, no 1 (janvier 1996) : 27–35. http://dx.doi.org/10.1177/0361198196155400104.

Texte intégral
Résumé :
Traffic signals have a significant effect on the choice of routes by motorists in urban areas. They are of primary importance in the development of advanced traffic management strategies that involve dynamic rerouting of traffic flows through signal-controlled street networks. A combined network model that simultaneously accounts for both the route choices made by motorists and the desired signal controls to match these choices is presented. Given origin-destination travel demand information, the model generates signal controls to optimize network performance and calculates the resulting traffic volumes in the network. This optimization model inherently reflects the mutual consistency between traffic flows and signal controls. The model is applicable to both fixed-time and demand-responsive signals. Computational procedures and sample network solutions are presented.
Styles APA, Harvard, Vancouver, ISO, etc.
37

Sheng, Zhoubin, Chunbiao Li, Yikai Gao, Zhinan Li et Lin Chai. « A Switchable Chaotic Oscillator with Multiscale Amplitude/Frequency Control ». Mathematics 11, no 3 (26 janvier 2023) : 618. http://dx.doi.org/10.3390/math11030618.

Texte intégral
Résumé :
For the wide frequency spectrum of chaotic signals, it is difficult to realize chaotic signal conditioning. Therefore, researchers turn to the exploration of chaotic systems with independent non-bifurcation control for easy chaos modification. In this paper, a system with only one non-quadratic term is modified for providing multiscale amplitude/frequency control. By adjusting the feedback with an odd higher degree term, a switchable chaotic oscillator is obtained, which provides the different scales of amplitude/frequency control with the chaotic signal. Multisim-based circuit simulation shows the efficiency and convenience of chaotic signal control.
Styles APA, Harvard, Vancouver, ISO, etc.
38

Mu, Haibo, Linzhong Liu, Yubo Song et Na Wang. « Control Strategy of Signal Transition after Emergency Vehicle Signal Preemption ». Discrete Dynamics in Nature and Society 2020 (27 janvier 2020) : 1–11. http://dx.doi.org/10.1155/2020/1382415.

Texte intégral
Résumé :
Emergency vehicle (EV) plays an important role in evacuations or rescues when emergencies occur. To insure that an EV can transfer people in danger to emergency shelters or medical assistance organizations as soon as possible, EV signal preemption (EVSP) strategy is usually adopted. After EV has passed through the intersection, traffic signal has to transfer back to normal signal timing scheme. This paper focuses on the control strategy of EV signal transitioning from EVSP back to normal operation. Considering both efficiency and fairness, the maximum vehicles passing through in per unit time during the transition period and the minimum difference between the maximum and the minimum queue length after transition are selected as objectives, and a multi-objective optimization model is presented. A nondominated sorting genetic algorithm II (NSGA-II) is designed to solve the optimization model and unique encoding and decoding methods are presented. The established model and designed algorithm are verified and the control effect is analyzed. Simulation results indicate that by adopting the control strategy obtained by the presented model, the number of vehicles passing through in per unit time during the transition period is increased and the difference of vehicle length in different directions is reduced significantly, from which we can conclude that the control method proposed in this paper has good performance.
Styles APA, Harvard, Vancouver, ISO, etc.
39

Zhang, T., C. Chen et M. Nakamura. « Reliable EOG signal-based control approach with EEG signal judgment ». Artificial Life and Robotics 14, no 2 (novembre 2009) : 195–98. http://dx.doi.org/10.1007/s10015-009-0652-7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

Zhang, Nannan. « Intelligent Control Optimization of Remote Transmission Quality of Communication Signals Based on 5G Network ». Journal of Physics : Conference Series 2066, no 1 (1 novembre 2021) : 012031. http://dx.doi.org/10.1088/1742-6596/2066/1/012031.

Texte intégral
Résumé :
Abstract With the rapid development of the information age, mobile communication networks have gradually entered people’s lives. The emergence of 5G networks has accelerated the convenience of people’s communication and contact, and has become an advanced information technology that has been widely used in various fields. Although the emergence of 5G networks is beneficial, the remote transmission quality of communication signals has also caused many problems. The optimization of remote transmission quality can effectively improve the operational stability of the communication network. There are many ways to optimize the transmission quality of communication signals. For example, when signal interference needs to be reduced, calculate the average value of signals in various places, set the interference reduction threshold function, and complete the remote transmission quality optimization of communication signals. The existing method is to use microblogs with hard and soft thresholds to decompose the signal quality through multiple scales to provide interference reduction thresholds, but ignore the calculation of the average value of the subband signals, so the signal transmission quality is optimized The effect is not satisfactory. It is recommended to reduce the interference in the network communication process based on the anti-window. First, the input communication signal is Pulley converted, the frequency domain interference detection is performed on the communication signal, a low-pass prototype filter is formed, the average value of the signal in each place is calculated, the interference reduction threshold is set, and the network communication process is completed. The weakening of interference realizes the optimization of transmission quality. This article conducts research and discussion on the optimization of the long-distance transmission quality of the communication signal of the 5G network. Experimental research results show that by demonstrating the optimization of the quality of the 5G communication signal transmission process, these demonstrations can ensure the quality of the communication signal, and people’s demand for the network is already indispensable.
Styles APA, Harvard, Vancouver, ISO, etc.
41

Oh, H. E., W. B. Jeong et C. Hong. « Implementation of a single-channel active noise control system with multiple reference sensors ». Noise Control Engineering Journal 68, no 5 (1 septembre 2020) : 358–66. http://dx.doi.org/10.3397/1/376830.

Texte intégral
Résumé :
When multiple sources contribute competitively to the noise level, multi-channel control architecture is needed, leading to more cost and time for control computation. We, hence, are concerned with a single-channel control method with a single-reference signal obtained from a linear combination of the multiple source signals. First, we selected 3 source signal sensors for the reference signals and the error sensor, selected a proper actuator and designed the controllers: 3 cases of single-channel feedforward controllers with a single-reference signal respectively from the source signals, a multi-channel feedforward controller with the reference signals from the source signals, and the proposed controller with the reference signal from weighted sum of the source signals. The weighting factors and the filter coefficients of the controller were determined by the FxLMS algorithm. An experiment was then performed to confirm the effectiveness of the proposed method comparing the control performance with other methods for a tower air conditioner. The overall sound pressure level (SPL) detected by the error sensor is compared to evaluate their performance. The reduction in the overall SPL was obtained by 4.74 dB, 1.96 dB and 6.62 dB, respectively, when using each of the 3 reference signals. Also, the overall SPL was reduced by 7.12 dB when using the multi-reference controller and by 7.66 dB when using the proposed controller. Conclusively, under the multiple source contribution, a single-channel feed forward controller with the reference signal from a weighted sum of the source signals works well with lower cost than multi-channel feedforward controller.
Styles APA, Harvard, Vancouver, ISO, etc.
42

Daniel, TO, et HE Ives. « Endothelial Control of Vascular Function ». Physiology 4, no 4 (1 août 1989) : 139–42. http://dx.doi.org/10.1152/physiologyonline.1989.4.4.139.

Texte intégral
Résumé :
Endothelial cells are exposed to stimuli within the lumen of blood vessels. Interpreting these signals, endothelial cells regulate production and release of mediators that signal underlying smooth muscle to contract, relax, or proliferate. Specialization of endothelial cells in different vascular beds may determine regional responses.
Styles APA, Harvard, Vancouver, ISO, etc.
43

Vosvrda, Miloslav S. « Discrete random signals and statistical signal processing ». Automatica 29, no 6 (novembre 1993) : 1617. http://dx.doi.org/10.1016/0005-1098(93)90033-p.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
44

Jia, Libin, Jeffrey D. Naber et Jason R. Blough. « Review of Sensing Methodologies for Estimation of Combustion Metrics ». Journal of Combustion 2016 (2016) : 1–9. http://dx.doi.org/10.1155/2016/8593523.

Texte intégral
Résumé :
For reduction of engine-out emissions and improvement of fuel economy, closed-loop control of the combustion process has been explored and documented by many researchers. In the closed-loop control, the engine control parameters are optimized according to the estimated instantaneous combustion metrics provided by the combustion sensing process. Combustion sensing process is primarily composed of two aspects: combustion response signal acquisition and response signal processing. As a number of different signals have been employed as the response signal and the signal processing techniques can be different, this paper did a review work concerning the two aspects: combustion response signals and signal processing techniques. In-cylinder pressure signal was not investigated as one of the response signals in this paper since it has been studied and documented in many publications and also due to its high cost and inconvenience in the application.
Styles APA, Harvard, Vancouver, ISO, etc.
45

Xu, Bingyu, Yaowei Wang, Zhaozhi Wang, Huizhu Jia et Zongqing Lu. « Hierarchically and Cooperatively Learning Traffic Signal Control ». Proceedings of the AAAI Conference on Artificial Intelligence 35, no 1 (18 mai 2021) : 669–77. http://dx.doi.org/10.1609/aaai.v35i1.16147.

Texte intégral
Résumé :
Deep reinforcement learning (RL) has been applied to traffic signal control recently and demonstrated superior performance to conventional control methods. However, there are still several challenges we have to address before fully applying deep RL to traffic signal control. Firstly, the objective of traffic signal control is to optimize average travel time, which is a delayed reward in a long time horizon in the context of RL. However, existing work simplifies the optimization by using queue length, waiting time, delay, etc., as immediate reward and presumes these short-term targets are always aligned with the objective. Nevertheless, these targets may deviate from the objective in different road networks with various traffic patterns. Secondly, it remains unsolved how to cooperatively control traffic signals to directly optimize average travel time. To address these challenges, we propose a hierarchical and cooperative reinforcement learning method-HiLight. HiLight enables each agent to learn a high-level policy that optimizes the objective locally by selecting among the sub-policies that respectively optimize short-term targets. Moreover, the high-level policy additionally considers the objective in the neighborhood with adaptive weighting to encourage agents to cooperate on the objective in the road network. Empirically, we demonstrate that HiLight outperforms state-of-the-art RL methods for traffic signal control in real road networks with real traffic.
Styles APA, Harvard, Vancouver, ISO, etc.
46

Pan, Qi, Yanli Zhou et Juntao Fei. « Feature Selection Fuzzy Neural Network Super-Twisting Harmonic Control ». Mathematics 11, no 6 (18 mars 2023) : 1495. http://dx.doi.org/10.3390/math11061495.

Texte intégral
Résumé :
This paper provides a multi-feedback feature selection fuzzy neural network (MFFSFNN) based on super-twisting sliding mode control (STSMC), aiming at compensating for current distortion and solving the harmonic current problem in an active power filter (APF) system. A feature selection layer is added to an output feedback neural network to attach the characteristics of signal filtering to the neural network. MFFSFNN, with the designed feedback loops and hidden layer, has the advantages of signal judging, filtering, and feedback. Signal filtering can choose valuable signals to deal with lumped uncertainties, and signal feedback can expand the learning dimension to improve the approximation accuracy. The STSMC, as a compensator with adaptive gains, helps to stabilize the compensation current. An experimental study is implemented to prove the effectiveness and superiority of the proposed controller.
Styles APA, Harvard, Vancouver, ISO, etc.
47

Wang, Yiming, et Yangfan Liu. « A directional active noise control algorithm based on all-pass/minimum phase decomposition ». Journal of the Acoustical Society of America 152, no 4 (octobre 2022) : A99. http://dx.doi.org/10.1121/10.0015672.

Texte intégral
Résumé :
In this paper, we propose the design of a directional active noise control (ANC) system, which can suppress the noise coming from one specific direction without affecting the noise coming from other directions. The proposed directional ANC system integrates the sound extraction feature of a beamforming system with the active noise canceling feature of an ANC system. Instead of using the signals collected by the reference microphones as the reference signals directly, the directional ANC system uses the signal filtered by carefully designed minimum phase beamforming filters as the new reference signal, in which the noise signal coming from the look-direction of the beamformer is enhanced and at the same time noise signals coming from other directions are suppressed. Usually, the filtered signal of a beamforming system cannot be used as the reference signal of an ANC system because the delays introduced by the beamforming process degrade the performance of the ANC system. To resolve the problem, a spectral factorization technique is introduced and used to extract the minimum phase component of the beamforming filters which decreases the required delays of the beamforming system.
Styles APA, Harvard, Vancouver, ISO, etc.
48

Glowinski, Sebastian, Sebastian Pecolt, Andrzej Błażejewski et Bartłomiej Młyński. « Control of Brushless Direct-Current Motors Using Bioelectric EMG Signals ». Sensors 22, no 18 (9 septembre 2022) : 6829. http://dx.doi.org/10.3390/s22186829.

Texte intégral
Résumé :
(1) Background: The purpose of this study was to evaluate the analysis of measurements of bioelectric signals obtained from electromyographic sensors. A system that controls the speed and direction of rotation of a brushless DC motor (BLDC) was developed; (2) Methods: The system was designed and constructed for the acquisition and processing of differential muscle signals. Basic information for the development of the EMG signal processing system was also provided. A controller system implementing the algorithm necessary to control the speed and direction of rotation of the drive rotor was proposed; (3) Results: Using two muscle groups (biceps brachii and triceps), it was possible to control the direction and speed of rotation of the drive unit. The control system changed the rotational speed of the brushless motor with a delay of about 0.5 s in relation to the registered EMG signal amplitude change; (4) Conclusions: The prepared system meets all the design assumptions. In addition, it is scalable and allows users to adjust the signal level. Our designed system can be implemented for rehabilitation, and in exoskeletons or prostheses.
Styles APA, Harvard, Vancouver, ISO, etc.
49

LI, XIAOLI, et R. DU. « MONITORING MACHINING PROCESSES BASED ON DISCRETE WAVELET TRANSFORM AND STATISTICAL PROCESS CONTROL ». International Journal of Wavelets, Multiresolution and Information Processing 02, no 03 (septembre 2004) : 299–311. http://dx.doi.org/10.1142/s0219691304000548.

Texte intégral
Résumé :
This paper presents a new method to monitor machining processes based on a combination of discrete wavelet transform (DWT) and statistical process control (SPC), called a multi-scale statistical approach. First, DWT is applied to decompose the sensor signal onto different scales. Next, the detection limits are formed for each decomposed signal components, called the sub-signals, using Shewhart control charts. Finally, by inverse wavelet transform of the threshold crossing points of the sub-signals, malfunctions can be detected. Based on a test on the tool condition monitoring in turning using acoustic emission (AE) signal, it is shown that the new method is effective and robust.
Styles APA, Harvard, Vancouver, ISO, etc.
50

He, Juan, Guang Yi Luo et Ji Qiong Chen. « Overview of Repetitive Control System ». Applied Mechanics and Materials 536-537 (avril 2014) : 1174–77. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.1174.

Texte intégral
Résumé :
The repetitive control theory is a theory of control system design, the purpose is to design a controller , which can make the system steady-state error be zero under tracking arbitrary periodicity reference signal, the repetitive control theory has been widely applied in tracking control system with periodic reference signals.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « CONTROL SIGNAL » pour d’autres types de sources :
Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie