Littérature scientifique sur le sujet « Continous blowing »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Continous blowing ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Continous blowing"
McCulloch, John G. « The History of the Development of Melt Blowing Technology ». International Nonwovens Journal os-8, no 1 (mars 1999) : 1558925099OS—80. http://dx.doi.org/10.1177/1558925099os-800123.
Texte intégralMargaris, P., et I. Gursul. « Wing tip vortex control using synthetic jets ». Aeronautical Journal 110, no 1112 (octobre 2006) : 673–81. http://dx.doi.org/10.1017/s0001924000001536.
Texte intégralYang, Chenghao, Elias J. G. Arcondoulis, Yannian Yang, Jing Guo, Reza Maryami, Chuanxing Bi et Yu Liu. « Active control of airfoil turbulent boundary layer noise with trailing-edge blowing ». Journal of the Acoustical Society of America 153, no 4 (avril 2023) : 2115–30. http://dx.doi.org/10.1121/10.0017787.
Texte intégralLi, Wenjie, Shibo Wang, Jianxin Xu, Jianhang Hu, Hua Wang, Yuling Zhai, Qingtai Xiao, Ge Deng et Dongbo Li. « Numerical Investigation of the Enhanced Stirring Characteristics of a Multi-Lance Top-Blowing Continuous Converting Furnace for Lance Arrangement and Variable-Velocity Blowing ». Energies 16, no 5 (2 mars 2023) : 2412. http://dx.doi.org/10.3390/en16052412.
Texte intégralMeijie, Z., G. Huazhi, H. Ao, Z. Hongxi et D. Chengji. « Numerical simulation and industrial practice of inclusion removal from molten steel by gas bottom-blowing in continuous casting tundish ». Journal of Mining and Metallurgy, Section B : Metallurgy 47, no 2 (2011) : 137–47. http://dx.doi.org/10.2298/jmmb110120006m.
Texte intégralSugiura, Konosuke, et Tetsuo Ohata. « Large-scale characteristics of the distribution of blowing-snow sublimation ». Annals of Glaciology 49 (2008) : 11–16. http://dx.doi.org/10.3189/172756408787814960.
Texte intégralAyuni, Farihah, Gina Selvia Rahayu, Nesty Ermin Nadhirah, Tegar Selaras Gustavisiana et Hisny Fajrussalam. « Perspektif Islam terhadap “Kaum Majusi” Modern ». YASIN 3, no 3 (7 mai 2023) : 342–51. http://dx.doi.org/10.58578/yasin.v3i3.1080.
Texte intégralWang, Dazhi, Fang Gao, Lidong Xing, Jianhua Chu et Yanping Bao. « Continuous Prediction Model of Carbon Content in 120 t Converter Blowing Process ». Metals 12, no 1 (14 janvier 2022) : 151. http://dx.doi.org/10.3390/met12010151.
Texte intégralYoshinaga, Etsuo. « Blow Analytic Mappings and Functions ». Canadian Mathematical Bulletin 36, no 4 (1 décembre 1993) : 497–506. http://dx.doi.org/10.4153/cmb-1993-065-1.
Texte intégralZhang, M. J., H. Z. Gu, A. Huang, H. X. Zhu et C. J. Deng. « Physical and mathematical modeling of inclusion removal with gas bottom-blowing in continuous casting tundish ». Journal of Mining and Metallurgy, Section B : Metallurgy 47, no 1 (2011) : 37–44. http://dx.doi.org/10.2298/jmmb1101037z.
Texte intégralThèses sur le sujet "Continous blowing"
Ammam, Tarek. « Development of innovative solutions for the control of the aerodynamic drag induced by cavity flows : Application to the reduction of railway energy consumtion ». Electronic Thesis or Diss., Valenciennes, Université Polytechnique Hauts-de-France, 2024. http://www.theses.fr/2024UPHF0011.
Texte intégralThis work concerns the analysis and control of the flow over cavities, which have the particularity of being laterally open and near a wall, with the aim of developing drag control solutions induced by bogie cavities of high-speed trains. To study this configuration, representative of railway cavities and known to be less sensitive to acoustic noise than cavities with smaller aspect ratios, experimental tests and numerical simulations (IDDES) were conducted. The motivations of our research focus on identifying the relationships between the flow and the aerodynamic loads applied on the cavity on one hand, and on the control of induced drag on the other hand. In this context, synchronized PIV-wall pressure tests were specifically conducted in addition to force measurements aimed at quantifying the contribution to drag (and thus to resistance to motion) of the cavity. These recent developments also allowed us to identify and parameterize a continuous blowing active control solution, based on reducing momentum at the cavity interface and underbody flow rate. The maximum associated drag reductions are around 20% for an empty cavity geometry and around 15% for a cavity including the bogie
TSAI, MAO-CHANG, et 蔡茂昌. « The Effect of Bottom Blowing Conditions on Floating Inclusion Behavior in the Vacuum Continuous Casting Process by Water Modeling ». Thesis, 2007. http://ndltd.ncl.edu.tw/handle/10856600199584215391.
Texte intégral義守大學
材料科學與工程學系碩士班
95
This research aims at enhancing the quality of melting metal solution in the vacuum continuous casting by using air blowing and floating inclusion to remove the nonmetallic impurity. Modify the air blowing in melting process by water model. Analyze the behavior of air bubbles to find the optimum parameters. In this experiment we made an Id112mm*H200mm acrylic water model. Confirm the similarity between the cold model and the hot model by the Buckingham theorem. Set the parameters of the water model experiment. Substitute copper melting by water and argon by air. Modify the real air blowing to float inclusion of hot model by water model. This research is divided into the static experiment and dynamic tests. (1)Static experiment:Without water entering from the water mold. Change the number of tuyeres (1~4) the tube, the liquid level (40, 80, 120mm), the air flow rate (1.0~2.5L/min) to analyze the influence of air bubble movement behavior by the tubes arrangement , the air bubble size, the air bubbles density of distribution. Estimate the optimum parameters combination. (2)Dynamic experiment:With water entering from the top of water mold and leaving from the bottom respectively. Modify the air blowing to float inclusion process whether the air bubble sink down to bottom and induce the flaw. (1) Result of static experiment: 1.With liquid level 80mm, four tuyeres, gas flowing rate below 1.5 L/min can make bubble size smaller and even. The air bubble flow field is stable and the turbulence of liquid surface may decrease. 2. With liquid level 80mm, 2 tuyeres, the gas flowing rate must be below 1.0 L/min. Converts in the actual casting system the optimum floating inclusion condition is:1. Melted fluid level is 80mm. The tuyere number is four. The argon flow rate must be below 6.67 L/min. 2. Melted fluid level is 80mm. The tuyere number is two. The argon flow rate must be below 4.44 L/min. (2) Result of dynamic test : The quantity of sinking air bubble is 0 %, that means that in the real casting process all air bubble float is upward. No air bubble will flow back to the flow channel.
Livres sur le sujet "Continous blowing"
Godøy, Rolf Inge. Key-postures, trajectories and sonic shapes. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780199351411.003.0002.
Texte intégralHong, Yu. Forging Broadband for the Commanding-Heights Economy. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252040917.003.0004.
Texte intégralPitts-Taylor, Victoria, dir. Cultural Encyclopedia of the Body. Greenwood, 2008. http://dx.doi.org/10.5040/9798400635014.
Texte intégralChapitres de livres sur le sujet "Continous blowing"
Wang, Songsong, et Xueyi Guo. « Thermodynamic Modeling of Oxygen Bottom-Blowing Continuous Converting Process ». Dans The Minerals, Metals & ; Materials Series, 573–83. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95022-8_45.
Texte intégralRen, Yong, Shuai Niu, WenCai Li et Xin Hong. « Experimental Research of Continuous Temperature Measurement for Molten Metal Bath through Bottom-Blowing Component ». Dans EPD Congress 2014, 277–83. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118889664.ch32.
Texte intégralKumar, A. R., K. M. Henderson et S. Schafrik. « Scale modeling, PIV, and LES of blowing type airflow in a deep cut continuous coal mining section ». Dans Mine Ventilation, 65–74. London : CRC Press, 2021. http://dx.doi.org/10.1201/9781003188476-7.
Texte intégralHartquist, T. W., J. E. Dyson et D. P. Ruffle. « Some Other Windy And Explosive Sources ». Dans Blowing Bubbles In The Cosmos, 142–50. Oxford University PressNew York, NY, 2004. http://dx.doi.org/10.1093/oso/9780195130546.003.0011.
Texte intégralSkowronski, Michael J., Michael R. Huspek et Camilla Righi. « Alternative Blowing Agent Solutions for Polyisocyanurate Continuous Laminate Metal Panels ». Dans Polyurethanes Expo 2001, 97–106. CRC Press, 2020. http://dx.doi.org/10.1201/9780429332609-16.
Texte intégral« Last Days with Chronic Obstructive Pulmonary Disease ». Dans Respiratory Symptoms, sous la direction de Margaret L. Campbell, 119—C14P40. Oxford University PressNew York, 2023. http://dx.doi.org/10.1093/med/9780190098896.003.0014.
Texte intégralHyde, Peter, et Alex Mahalov. « Bowing Sand, Dust, and Dunes, Then and Now–A North American Perspective ». Dans Deserts and Desertification. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.98337.
Texte intégralD'Agostino, Susan. « Abandon perfectionism, because of the Hairy Ball Theorem ». Dans How to Free Your Inner Mathematician, 131–36. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198843597.003.0023.
Texte intégralHalmi, Katherine A. « Eating disorders ». Dans Pediatric Psychopharmacology : Principles and Practice, 592–604. Oxford University PressNew York, NY, 2002. http://dx.doi.org/10.1093/oso/9780195141733.003.0044.
Texte intégral« Epilogue ». Dans Fire Dreams, 210–24. Duke University Press, 2024. http://dx.doi.org/10.1215/9781478027690-007.
Texte intégralActes de conférences sur le sujet "Continous blowing"
Nonomura, Taku, Satoshi Sekimoto, Kengo Asada, Akira Oyama et Kozo Fujii. « Experimental Study of Blowing Direction Effects of DBD Plasma Actuator on Separation Control of Flow Around an Airfoil ». Dans ASME-JSME-KSME 2011 Joint Fluids Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajk2011-15010.
Texte intégralKornilov, V. I., et E. A. Shkvar. « Turbulent boundary layer on a body of revolution under conditions of distributed air blowing ». Dans ACTUAL PROBLEMS OF CONTINUUM MECHANICS : EXPERIMENT, THEORY, AND APPLICATIONS. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0132325.
Texte intégralTadjfar, M., Saman Kasmaiee et S. Noori. « Continuous Blowing Jet Flow Control Optimization in Dynamic Stall of NACA0012 Airfoil ». Dans ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fedsm2020-20149.
Texte intégralOu, Shichuan, et Richard B. Rivir. « Shaped-Hole Film Cooling With Pulsed Secondary Flow ». Dans ASME Turbo Expo 2006 : Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-90272.
Texte intégralHassan, O., et I. Hassan. « Experimental Flow Field Investigations Downstream a Film Cooling Scheme Over a Flat Plate Using the PIV Technique ». Dans ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65650.
Texte intégralRao, I. J. « Simulation of the Film Blowing Process Using a Continuum Model for Crystallization in Polymers ». Dans ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1993.
Texte intégralShalash, Karim M., Lamyaa A. El-Gabry et Mohamed M. Abo El-Azm. « Investigation of a Novel Discrete Slot Film Cooling Scheme ». Dans ASME Turbo Expo 2014 : Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-26019.
Texte intégralCoulthard, Sarah M., Ralph J. Volino et Karen A. Flack. « Effect of Jet Pulsing on Film Cooling : Part 2 — Heat Transfer Results ». Dans ASME Turbo Expo 2006 : Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-91274.
Texte intégralCoulthard, Sarah M., Ralph J. Volino et Karen A. Flack. « Effect of Jet Pulsing on Film Cooling : Part 1— Effectiveness and Flowfield Temperature Results ». Dans ASME Turbo Expo 2006 : Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-91273.
Texte intégralAsgari, Ehsan, et Mehran Tadjfar. « Comparison of Two Active Flow Control Mechanisms of Pure Blowing and Pure Suction on a Pitching NACA0012 Airfoil at Reynolds Number of 1 × 106 ». Dans ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/fedsm2018-83463.
Texte intégral