Bibliographies thématiques / Computer Aided Technologies

Littérature scientifique sur le sujet « Computer Aided Technologies »

Auteur : Grafiati
Publié le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Computer Aided Technologies ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Computer Aided Technologies"

1

Menshutina, Natalia V., et Tadeusz Kudra. « COMPUTER AIDED DRYING TECHNOLOGIES ». Drying Technology 19, no 8 (31 août 2001) : 1825–49. http://dx.doi.org/10.1081/drt-100107275.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Popov, Stepan Alexandrovich. « The Importance of Computer Aided Technologies and Brand Promotion in Dress Design ». Revista Gestão Inovação e Tecnologias 11, no 2 (5 juin 2021) : 1243–52. http://dx.doi.org/10.47059/revistageintec.v11i2.1752.

Texte intégral
Résumé :
This article discusses the importance of computer aided technologies and brand promotion in dress design. The subject of research is computer aided technologies in dress design. The research topic involves interrelations between fine arts and computer aided technologies, which should be considered as the basis of brand promotion in dress design. The research is aimed at revealing necessity of computer aided technologies as an inherent attribute in design. The research hypothesis assumes that interrelation between computer aided technologies and design is highly relevant and required at present. The integrated approach used for considering designer activity in connection with realities of technological progress, as well as the system approach used for revealing the interrelation between the theory of fashion industry and the designing practice, and stylistic and technological analysis were applied in the work. The techniques of dress design using professional computer graphics were described. The research results eliminate drawbacks in model development regarding creative dress design concept and visual presentation of collection for consumers. The relevance of computer aided technologies for modern design assumes various opportunities of application of these tools both in teaching professional disciplines and in creation of dress design. Development of computer aided technologies allows designing models by computer graphics, which assists development of fashion industry and education in total.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kolbasin, Alexander, et Oksana Husu. « Computer-aided design and Computer-aided engineering ». MATEC Web of Conferences 170 (2018) : 01115. http://dx.doi.org/10.1051/matecconf/201817001115.

Texte intégral
Résumé :
In modern industrial production some of the major factors of successful development include: cost reduction of the production, im-provement of its quality, as well as help to minimise the time in market en-try. Computer-aided design and Computer-aided engineering (CAD / CAE - systems) are the most effective for implementation of these requirements. Possible use of this engineering modeling simulation in conjunction with the power and speed of high performance computing could reduce costs and time of each cycle of designing, and also significantly reduce devel-opment time. The introduction of new technologies, the use of high quality products and engagement of qualified personnel would allow businesses and organizations to get on a path of innovative development of design and production systems.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Alizoti, Alion. « Computer – Aided RGB analyses of images ». Technium Romanian Journal of Applied Sciences and Technology 3, no 8 (28 septembre 2021) : 1–12. http://dx.doi.org/10.47577/technium.v3i8.4691.

Texte intégral
Résumé :
Computers have long been applied to physics and education. Considering that computer technologies are affecting science in many ways, special attention is payed to images and image analyses. RGB processing is used to analyse several computer images and presented with this papper. Furthermore, numerical data from images are used to tables and graphs, to motivate students devoted to science and research.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Onoral, Özay. « New Approaches in Computer Aided Printing Technologies ». Cumhuriyet Dental Journal 19, no 3 (24 mars 2017) : 256. http://dx.doi.org/10.7126/cumudj.298920.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Gaines, B. R., et M. L. G. Shaw. « The changing technologies underlying computer-aided design ». Environment and Planning B : Planning and Design 13, no 4 (1986) : 377–84. http://dx.doi.org/10.1068/b130377.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Horváth, László, et Imre J. Rudas. « Emerging Intelligent Technologies in Computer-Aided Engineering ». Journal of Advanced Computational Intelligence and Intelligent Informatics 4, no 4 (20 juillet 2000) : 268–78. http://dx.doi.org/10.20965/jaciii.2000.p0268.

Texte intégral
Résumé :
Competition generated the requirement of quick decisions at engineering activities. As a consequence, application of advanced computer modeling in engineering design needs application of intelligent computer methods to assist human decision making. A powerful CAD/CAM system with a comprehensive range of sophisticated modeling tools for describing engineering objects and programming tools for creating modeling procedures constitutes an appropriate environment to accept intelligent methods. The only way of survival for companies producing mechanical products on the competitive edge seems application of advanced modeling together with intelligent decision making. Much modeling, problem solving, database handling, visualization and other methods are involved in a typical computer-based engineering process. This process recently relies upon an integrated set of modeling tools and an integrated product database. Involving intelligent computer methods is a great challenge in this field. This paper surveys advanced modeling from the point of view of application of intelligent methods. It is organized as follows. A characterization of state of the art in advanced engineering modeling reveals important issues to be discussed in this paper. Following this, worldwide network-based group work of engineers is discussed. Human computer interaction (HCI) and network communication methods as important aspects of computer-aided engineering are outlined. Then recent development results in modeling of mechanical systems with special emphasis on integrated modeling of mechanical products, especially well-engineered shapes, are introduced. Finally, virtual manufacturing as an area of involving intelligent methods in CAD/CAM technology is discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Chen, Shang-Liang, et Wen-Tsai Wang. « Computer aided manufacturing technologies for centrifugal compressor impellers ». Journal of Materials Processing Technology 115, no 3 (septembre 2001) : 284–93. http://dx.doi.org/10.1016/s0924-0136(01)00828-7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Lynch, Charles J., et Conor Liston. « New machine-learning technologies for computer-aided diagnosis ». Nature Medicine 24, no 9 (septembre 2018) : 1304–5. http://dx.doi.org/10.1038/s41591-018-0178-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Neugebauer, Jörg, Gerhard Stachulla, Lutz Ritter, Timo Dreiseidler, Robert A. Mischkowski, Erwin Keeve et Joachim E. Zöller. « Computer-aided manufacturing technologies for guided implant placement ». Expert Review of Medical Devices 7, no 1 (janvier 2010) : 113–29. http://dx.doi.org/10.1586/erd.09.61.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Computer Aided Technologies"

1

Katragadda, Shilpesh. « DrawCAD, using advanced database technologies for computer-aided design ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape7/PQDD_0004/MQ45328.pdf.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Feinstein, David Dov Yehuda. « Computer-aided-design methods for emerging quantum computing technologies ». Ann Arbor, Mich. : ProQuest, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3303775.

Texte intégral
Résumé :
Thesis (Ph.D. in Computer Engineering)--S.M.U.
Title from PDF title page (viewed Mar. 16, 2009). Source: Dissertation Abstracts International, Volume: 69-03, Section: B, page: 1733. Adviser: Mitchell A. Thornton. Includes bibliographical references.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Lim, Cher Ping. « Situating information and communications technologies (ICT) in the economics course ». Thesis, University of Bristol, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.322618.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Hall, David John. « Interactive preliminary design assessment of advanced technologies on combat aircraft configurations ». Thesis, Imperial College London, 1999. http://hdl.handle.net/10044/1/7904.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Cingi, Guney. « The Influence Of Digital Technologies On The Interaction Of Design And Manufacturing Processes ». Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12606944/index.pdf.

Texte intégral
Résumé :
This study aims to analyze and evaluate the influence of digital technologies on the inter-action of design and manufacturing processes by representing an outlook of digital tech-nologies through developments in modeling capabilities, manufacturing techniques, mate-rial science, and design strategies. The digital era reached by the technological developments in different fields of sci-ence influenced the field of architecture, just like the others. Thus, a new kind of spa-tial and tectonic quality in architecture is emerging with the lately introduced design tools and materials that are novel to the building industry, while redefining the role of architect in this contemporary medium. The evolutionary process of Frank O. Gehry and his office, being a pioneer in using digital design and manufacturing tools in architecture, is represented with realized examples that point out the formerly discussed developments in the realm of architecture and visualize the tectonics of the digitally designed and produced buildings
culminating with the case study of Guggenheim Museum, Bilbao.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Gunn, Wendy. « The social and environmental impact of incorporating computer aided design technologies into an architectural design process ». Thesis, University of Manchester, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.494492.

Texte intégral
Résumé :
Studies in the history of architecture tend to focus on form, leading to a narrow emphasis on visual aesthetics. Adopting an anthropological perspective my research sets out to widen this understanding, by considering how architectural knowledge influences conceptual orientation and how this, in turn, affects the perception of the environment and subsequent decision-making processes and ways of working. Specifically the research explores the problems and potentials of the introduction of computer aided design (CAD) tools into architectural working practices and how this impacts on existing traditions and relations with the environment. The argument focuses on the relations between agents and technologies, and on the representation of these relations, working between the realms of the abstract and the material. Within the architectural design process, knowledge is shown to be situated, embodying a process of thinking and acting within a social context. This challenges the assumptions that action is controlled by an interior process of thought, and that thinking is separate from doing. My findings show that architects do not separate thinking from doing during the developmental phases of a design process. I argue that the interrelations between human perception, creativity, innovation and skill, within a group design process, should be understood in context, hot as abstractions but as grounded in the activities of persons within a field of social relations. My research focuses on the following areas: the interrelations between tools and landscapes of use; simulation, automation and control of human movements; processes of representation and transformation in the domains of vision, verbal dialogue, touch and manipulation; self-definition and identity formation within sociotechnical relations; doubt, hesitation and the creative process; problems of acquiring and sharing knowledge between disciplines and across sites; visual thinking and decision-making processes; correlates of tool-use, imitation and learning. Ethnographic material was gathered during sixteen months of fieldwork, between September 1997 and June 1999. Field research was conducted principally in Norway, Finland and Denmark. It involved thirty structured interviews, unstructured discussions, archival research, the development of a seminar and participation in a multi-disciplinary workshop involving a systems designer, a cultural historian, and an anthropologist. Professionals from the building industry, systems designers, historians of science and technology, anthropologists and philosophers were involved in the project. Interviews were conducted in Norwegian and English. The bulk of the Norwegian field research was conducted in the city of Tromso in collaboration with a number of architectural practices. During the final four months, I was working with an architectural practice in Oslo while undertaking a case study of how CAD technologies were incorporated into the design process for the new Alexandria Library in Egypt. My research shows that CAD technologies are being incorporated into working processes as means of reinforcing traditional practices. The capacity of CAD technologies to assemble diverse kinds of information is understood by a number of architects as a way of regaining control over the building process. At the same time, developments in the design of CAD technologies directly impact upon how architects understand the performative aspects of traditional knowledge systems within the architectural design process. The thesis demonstrates how anthropological studies of technology can help to understand the relations between agents and technologies in new ways. It offers an enhanced understanding of what is meant by situated action, especially with regard to the dynamic interrelations between gesture and speech. Moreover the study highlights the contribution that anthropological knowledge can make concerning the problem of human/machine communication. Finally, the thesis presents new ethnographic material in an area of the anthropology of technology - namely, architectural design - which to date has been little studied.
Styles APA, Harvard, Vancouver, ISO, etc.
7

De, Beer D. J. « The impact of additive fabrication technologies on Institutional Research Development and the SA product development community-the CRPM story ». Interim : Interdisciplinary Journal, Vol 7, Issue 1 : Central University of Technology Free State Bloemfontein, 2008. http://hdl.handle.net/11462/377.

Texte intégral
Résumé :
Published Aticle
The Centre for Rapid Prototyping and Manufacturing (CRPM) made a humble start in 1997 as a spin-off from a proposed research activity in 1995, at a stage when Technikons were still being seen as occupational training institutions rather than higher education institutions and and as such, were not funded for research. Addressing an area of high importance to the South African industry, the research activity soon grew into a research unit, commercial centre / centre of excellence, technology transfer unit and innovation support centre. Above all, the research started to impact on product development practices to deliver improved products. The paper considers the development of the available technology platforms at the CUT'S CRPM to become a technology power-house on the African continent, and how it impacted on Institutional Research Development in South Africa.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Martins, Duarte Lima. « Purification of complex biopharmaceuticals with new processes, advanced analytics and computer-aided process design tools ». Master's thesis, Faculdade de Ciências e Tecnologia, 2013. http://hdl.handle.net/10362/11105.

Texte intégral
Résumé :
Dissertação para obtenção do Grau de Mestre em Biotecnologia
Viruses are highly efficient vectors that have been used for vaccination and gene therapy applications. However, their complexity renders downstream process particularly challenging since devices and strategies especially designed for virus purification are still lacking or need further optimization. After an introduction to the challenges of virus purification and the current strategies being employed, this dissertation presents the study of three different stages of the downstream process: clarification, ultrafiltration and chromatography. A novel clarification procedure based on diatomaceous earth was evaluated. Small-scale batch incubations led to the identification of Divergan RS – a synthetic non-charged material – as the most promising candidate for integration in a scalable filtration set-up. Ultrafiltration was addressed with the evaluation of cassette and hollow fiber modules. The results obtained show that cassette module with cut-offs in the 500 kDa range and highly hydrophilic materials enable complete recovery of infective Adenovirus while reducing process time in half when compared with the best hollow fibers. Despite the encouraging results with Adenovirus, the experiments using Retrovirus resulted in low yields and possible optimization strategies were identified. Membrane technology was also evaluated as an alternative to the packed-bed chromatography columns. By using a scale-down 96-well device, the impact of ligand density, membrane structure and feed conductivity were evaluated for the purification of Adenovirus by ion exchange chromatography. The hydrogel-grafted membrane with ligand density of 2.4 μmol cm-2 operated in bind/elute mode shown the best compromise between yield and purity. Overall, this thesis contributed to the advancement of virus purification field by exploiting innovative technologies.
Fundação para a Ciência e a Tecnologia - (PTDC/EBBBIO/119501/2010)
Styles APA, Harvard, Vancouver, ISO, etc.
9

Morad, Ayman Ahmed. « Geometric-based reasoning system for project planning utilizing AI and CAD technologies ». Diss., This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-06062008-172127/.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Ram, Mohan Nethra Mettuchetty. « Emerging technologies in architectural visualization implementation strategies for practice / ». Master's thesis, Mississippi State : Mississippi State University, 2003. http://library.msstate.edu/etd/show.asp?etd=etd-04072003-164447.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Computer Aided Technologies"

1

Rettberg, Achim, et Christophe Bobda, dir. New Trends and Technologies in Computer-Aided Learning for Computer-Aided Design. Boston, MA : Springer US, 2005. http://dx.doi.org/10.1007/0-387-30761-3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Printed circuits design : Featuring computer-aided technologies. New York : McGraw Hill, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

CAT '92 (8th 1992 Stuttgart, Germany). CAT '92, computer aided technologies : 8. internationale Fachmesse für Computerunterstützte Technologien und Anwenderkongress : Tagungsband = 8th international exhibition for computer aided technologies with user conference : proceedings. Stuttgart : Stuttgarter Messe- und Kongressgesellschaft, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

International Exhibition for Computer Aided Technologies with User Conference. CAT'92 : Computer aided technologies : proceedings, 8th International Exhibition for Computer Aided Technologies with User Conference = Tagungsband, 8. Internationale Fachmesse für Computerunterstützte Technologien und Anwenderkongress. Nürnberg : Müller adress + Neue Mediengesellschaft Ulm, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Canada. Dept. of Regional Industrial Expansion. Office of Industrial Innovation. Cad/Cam : Selected Articles on Advanced Manufacturing Technologies, Reprint no.3. Computer Aided Design and Computer Aided Manufacturing. S.l : s.n, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

M, Usher John, Roy Utpal et Parsaei H. R, dir. Integrated product and process development : Methods, tools, and technologies. New York : Wiley, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Debackere, Koenraad. Technologies to develop technology : The impact of new technologies on the organisation of innovation projects. Antwerpen : Maklu, 1999.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Uchiyama, Kunio. Heterogeneous Multicore Processor Technologies for Embedded Systems. New York, NY : Springer New York, 2012.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

EduTech 2005 (2005 Perth, W.A.). New trends and technologies in computer-aided learning for computer-aided design : IFIP TC10 working conference : EduTech 2005, October 20-21, Perth, Australia. New York, NY : Springer, 2005.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

International Conference on Knowledge-Based Intelligent Information Engineering Systems (2002 Milan, Italy). Knowledge-based intelligent information engineering systems and allied technologies : KES 2002. Amsterdam : IOS Press, 2002.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Computer Aided Technologies"

1

Jacob, Marni L., et Eric A. Storch. « Computer-Aided Psychotherapy Technologies ». Dans Health Informatics, 57–80. Cham : Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14109-1_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Cooling, J. E., N. Duff et J. Cooling. « Computer aided teaching of programming languages ». Dans Reliable Software Technologies — Ada-Europe '97, 35–45. Berlin, Heidelberg : Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/3-540-63114-3_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ito, Mariko I., et Takaaki Ohnishi. « Weighted Network Analysis for Computer-Aided Drug Discovery ». Dans Intelligent Decision Technologies, 27–36. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5925-9_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Lantada, Andrés Díaz, et Pilar Lafont Morgado. « Computer-Aided Design (CAD) Technologies for Biodevices ». Dans Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices, 59–74. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-6789-2_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

März, Reinhard. « Computer Aided Engineering for Microsystems - Status and Trends ». Dans Micro System Technologies 90, 31–37. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Esposito, Alessandra, Luciano Tarricone, Laura Vallone et Mariangela Vallone. « Cooperative Computer Aided Engineering of Antenna Arrays ». Dans Advances in Information Technologies for Electromagnetics, 295–326. Dordrecht : Springer Netherlands, 2006. http://dx.doi.org/10.1007/978-1-4020-4749-7_10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Chow, Mo-yuen, Yuan-Shin Lee et H. Joel Trussell. « Case Example 1 : Motor incipient fault detection using artificial neural network and fuzzy logic technologies ». Dans Computer-aided Maintenance, 263–80. Boston, MA : Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-5305-2_12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Buisson, Jean-Christophe. « Approximate Reasoning in Computer-Aided Medical Decision Systems ». Dans Practical Applications of Fuzzy Technologies, 337–61. Boston, MA : Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-4601-6_11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Lantada, Andrés Díaz, Pilar Lafont Morgado et Carlos Jahel Ojeda Díaz. « Computer-Aided Manufacturing (CAM) of Biodevices ». Dans Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices, 167–79. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-6789-2_9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Trzupek, Mirosław, et Marek R. Ogiela. « Information Fusion Approach in Computer-Aided Detection of Pathological Changes ». Dans Intelligent Decision Technologies, 45–50. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29920-9_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Computer Aided Technologies"

1

Sartor, Giovanni, Jeremy Pitt et Alessandra Villecco. « Computer-aided law and advanced technologies ». Dans the 2005 ACM symposium. New York, New York, USA : ACM Press, 2005. http://dx.doi.org/10.1145/1066677.1066743.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Ciubancan, Mihai, Mariana Marinescu, Viorel Marinescu, Oana Grigoriu, Giorgian Neculoiu, Virginia Sandulescu et Ionela Halcu. « Computer aided learning with GRID technologies ». Dans 2011 RoEduNet International Conference 10th Edition : Networking in Education and Research. IEEE, 2011. http://dx.doi.org/10.1109/roedunet.2011.5993719.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Bécar, Jean-Paul, Jean-Charles Canonne, Marika Seppälä et Alain Mayeur. « COMPUTER AIDED TEACHINGS SYSTEMS ». Dans International Conference on Education and New Learning Technologies. IATED, 2016. http://dx.doi.org/10.21125/edulearn.2016.0380.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Ilhan, Hamza Osman, et Nizamettin Aydin. « Computer aided motile sperm counting ». Dans 2017 Medical Technologies National Congress (TIPTEKNO). IEEE, 2017. http://dx.doi.org/10.1109/tiptekno.2017.8238046.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Akbulut, Akhan. « Computer aided autism threapy system design ». Dans 2015 Medical Technologies National Conference (TIPTEKNO). IEEE, 2015. http://dx.doi.org/10.1109/tiptekno.2015.7374615.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

« S2 : Information systems and technologies, computer-aided design ». Dans 2018 14th International Conference on Advanced Trends in Radioelecrtronics, Telecommunications and Computer Engineering (TCSET). IEEE, 2018. http://dx.doi.org/10.1109/tcset.2018.8336167.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Charbonneau, Nathalie, Dominic Boulerice, David W. Booth et Temy Tidafi. « Understanding Gothic Rose Windows with Computer-Aided Technologies ». Dans eCAADe 2006 : Communicating Space(s). eCAADe, 2006. http://dx.doi.org/10.52842/conf.ecaade.2006.770.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Charbonneau, Nathalie, Dominic Boulerice, David W. Booth et Temy Tidafi. « Understanding Gothic Rose Windows with Computer-Aided Technologies ». Dans eCAADe 2006 : Communicating Space(s). eCAADe, 2006. http://dx.doi.org/10.52842/conf.ecaade.2006.770.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Sönmez, Ayca, et Arzu Gönenc Sorguc. « Computer-Aided Fabrication Technologies as Computational Design Mediators ». Dans eCAADe 2021 : Towards a New, Configurable Architecture. eCAADe, 2021. http://dx.doi.org/10.52842/conf.ecaade.2021.1.465.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Yau, Hong-Tzong, et Chia-Hsiang Menq. « Computer-Aided Coordinate Metrology ». Dans ASME 1993 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/cie1993-0028.

Texte intégral
Résumé :
Abstract Three-dimensional coordinate metrology has gained much attention in recent years. On one hand, the accuracy and repeatability of a coordinate measuring machine (CMM) are approaching the sub-micron level. On the other hand, there is hardly any part that exists of which the dimensions cannot be measured with a CMM. This paper presents the recent development and applications in three-dimensional coordinate metrology. The emphasis has been placed in the utilization of computers and integration with CAD/CAM systems. Three important technologies, namely, CAD-directed inspection, three-dimensional optimal match, and reverse engineering are presented and discussed. With computers and CAD/CAM support, three-dimensional coordinate metrology has become an active part of the computer-integrated manufacturing (CIM). Its versatility and high degree of automation have made the CMM a universal inspection machine for quality control of manufactured parts in computer integrated manufacturing.
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Computer Aided Technologies"

1

Potts Steves, Michelle, Simon Frechette, John T. Foreman et William B. Anderson. Viewing Technologies for Computer-Aided Design Models. Fort Belvoir, VA : Defense Technical Information Center, septembre 2003. http://dx.doi.org/10.21236/ada418350.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Thornton, M. Application of Robust Design and Advanced Computer Aided Engineering Technologies : Cooperative Research and Development Final Report, CRADA Number CRD-04-143. Office of Scientific and Technical Information (OSTI), juin 2013. http://dx.doi.org/10.2172/1087775.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Barrow, Lisa, Lisa Markman et Cecilia Rouse. Technology's Edge : The Educational Benefits of Computer-Aided Instruction. Cambridge, MA : National Bureau of Economic Research, août 2008. http://dx.doi.org/10.3386/w14240.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Tkachuk, Viktoriia V., Vadym P. Shchokin et Vitaliy V. Tron. The Model of Use of Mobile Information and Communication Technologies in Learning Computer Sciences to Future Professionals in Engineering Pedagogy. [б. в.], novembre 2018. http://dx.doi.org/10.31812/123456789/2668.

Texte intégral
Résumé :
Research goal: the research is aimed at developing a model of use of mobile ICT in learning Computer Sciences to future professionals in Engineering Pedagogy. Object of research is the model of use of mobile ICT in learning Computer Sciences to future professionals in Engineering Pedagogy. Results of the research: the developed model of use of mobile ICT as tools of learning Computer Sciences to future professionals in Engineering Pedagogy is based on the competency-based, person-centered and systemic approaches considering principles of vocational education, general didactic principles, principles of Computer Science learning, and principles of mobile learning. It also takes into account current conditions and trends of mobile ICT development. The model comprises four blocks: the purpose-oriented block, the content-technological block, the diagnostic block and the result-oriented block. According to the model, the learning content of Computer Sciences consists of 5 main units: 1) Fundamentals of Computer Science; 2) Architecture of Modern Computers; 3) Fundamentals of Algorithmization and Programming; 4) Software of Computing Systems; 5) Computer Technologies in the Professional Activity of Engineer-pedagogues.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Ступнік, М. І., В. С. Моркун et З. П. Бакум. Information and Communication Technologies in the Process of Mining Engineer Training. Криворізький державний педагогічний університет, 2013. http://dx.doi.org/10.31812/0564/405.

Texte intégral
Résumé :
Based on scientific analysis the authors of the article argued the necessity of solving priority tasks – the development of new educational technologies aimed at supporting the training of engineers in terms of the mining engineering as high-tech industry. The features of mining computer technologies are determined. There was worked out the project of the adaptive system of a mining engineer individual training "Electronic manual" aimed at the development of future professionals. The essence of individual preparation of future mining engineer ICT is defined. It is proved that the efficiency of the designing and planning of mining operations through the introduction of ICT at present is the real way to influence the quality of mining products that will promote individual learning orientation. For the first time pedagogical foundations for introducing adaptive training of mining engineers are clarified.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Лукаш, ,. Людмила Вікторівна. The didactic model of education of the future elementary school teachers to activities for the prevention of violations of children’s posture. Wydawnictwo Naukowe Wyzszej Szkoly Informatyki i Umiejetnosci, 2016. http://dx.doi.org/10.31812/0564/1459.

Texte intégral
Résumé :
The state of musculoskeletal system incidence of pupils of secondary schools remains a pressing problem in all regions of Ukraine, in spite of significant achievements in this direction. The determination of the readiness of teachers and senior students of pedagogical college for implementation of health-keeping technologies, which are aimed at creating a physiological posture of schoolchildren, to the educational process was conducted by our questioning method. 95% of teachers and 77.6% of students (according to polls) need methodological assistance for effective use of health-keeping technologies. We consider the main task of high school to be an optimization of the informational flow regarding health-keeping during the educational process and adaptation of the ways of presenting information to the perception of modern youth. The self-education has a great value for getting mastery, so it is necessary that a student or a teacher could have a wide access to both literature and electronic media. The Internet conferences, Internet sites, electronic textbooks, computer programs will be useful.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Patel, Yusef. File to Factory : A case study of automated prefabrication house-building methods for small-to-medium enterprises. Unitec ePress, décembre 2017. http://dx.doi.org/10.34074/ocds.0823.

Texte intégral
Résumé :
The Eco-Digital Fabrication (EDFAB) research project aimed to investigate how automated prefabrication technologies and off-the-shelf construction products can be employed to disrupt building industry norms. The aim of this research – conducted at the University of Auckland and Unitec Institute of Technology from 2014 onward – was to provide small-to-medium enterprises in the construction industry with a pathway to upskill and increase construction productivity through the use of these processes. The availability of automated machines and easy-to-use fabrication software is increasing dramatically and this can be paired with readily available construction products to produce novel mass-customised housing solutions. The application of basic automated technologies – such as CNC (Computer Numerical Control) routers – allowed researchers to create ‘recipes’ that can be adopted and adapted relatively easily. By no means did the research favour digital manufacture or assembly processes over traditional analogue construction techniques – the goal was to provide logical, productive and accessible blended solutions for greater affordability and flexibility in design. For example, the designed experiments were required to be built from readily available products, and used simple readymade screw fixings rather than digitally produced custom fixings or joining mechanisms. The research project aimed to generate discussion and provide recommendations on how the construction industry might support the adoption of automated prefabrication technology in small-to-medium enterprise (SME).
Styles APA, Harvard, Vancouver, ISO, etc.
8

Valko, Nataliia V., Viacheslav V. Osadchyi et Vladyslav S. Kruhlyk. Cloud resources use for students' project activities. [б. в.], juin 2021. http://dx.doi.org/10.31812/123456789/4444.

Texte intégral
Résumé :
The modern educational system proclaims learning aimed at acquiring practical skills and based on the activity approach. Educational research projects are the necessary component of curricula in physics, computer science, biology and chemistry. There is a problem of specialized equipment and facilities using for the implementation of such projects in distance learning. Therefore, the issue of cloud resources using for distance learning organization in robotics is relevant. The article presents a brief overview of the current state of projects development in Ukrainian schools and approaches used in foreign educational institutions in teaching robotics distantly. The article describes the stages of robotics projects development such as organizational, communicative, project work, summarizing. The peculiarities of the stages in distance learning and the possibilities of cloud technologies in robotics are also considered. The authors’ experience in projects developing in this environment for students and future teachers is described.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Osadchyi, Viacheslav V., Hanna B. Varina, Kateryna P. Osadcha, Olha V. Kovalova, Valentyna V. Voloshyna, Oleksii V. Sysoiev et Mariya P. Shyshkina. The use of augmented reality technologies in the development of emotional intelligence of future specialists of socionomic professions under the conditions of adaptive learning. CEUR Workshop Proceedings, juillet 2020. http://dx.doi.org/10.31812/123456789/4633.

Texte intégral
Résumé :
In modern conditions, innovative augmented reality technologies are actively developing, which are widespread in many areas of human activity. Introduction of advanced developments in the process of professional training of future specialists of socionomic professions in the conditions of adaptive training, contributes to the implementation of the principles of a personalized approach and increase the overall level of competitiveness. The relevant scientific article is devoted to the theoretical and empirical analysis result of conducting a psychodiagnostic study on an innovative computer complex HC-psychotest. of the features of the implementation of augmented reality technologies in the construct of traditional psychological and pedagogical support aimed at the development of emotional intelligence of the future specialist. The interdisciplinary approach was used while carrying out the research work at the expense of the general fund of the state budget: “Adaptive system for individualization and personalization of professional training of future specialists in the conditions of blended learning”. A comprehensive study of the implementation of traditional psychological-pedagogical and innovative augmented reality technologies was conducted in the framework of scientific cooperation of STEAM-Laboratory, Laboratory of Psychophysiological Research and Laboratory of Psychology of Health in Bogdan Khmelnitsky Melitopol State Pedagogical University. The theoretical analysis considers the structural model of emotional intelligence of the future specialist of socionomic professions, which is represented by two structural components: intrapersonal construct of emotional intelligence and interpersonal construct of emotional intelligence. Each component mediates the inherent emotional intelligence of interpretive, regulatory, adaptive, stress-protective and activating functions. The algorithm of the empirical block of research is presented by two stages: ascertaining and forming research. According to the results of the statement, low indicators were found on most scales, reflecting the general level of emotional intelligence development of future specialists, actualizing the need to find and implement effective measures for the development of emotional intelligence components in modern higher education and taking into account information development and digitalization. As part of the formative stage of the research implementation, a comprehensive program “Development of emotional intelligence of future professionals” was tested, which integrated traditional psychological and pedagogical technologies and innovative augmented reality technologies. This program is designed for 24 hours, 6 thematic classes of 4 hours. According to the results of a comprehensive ascertaining and shaping research, the effectiveness of the influence of augmented reality technologies on the general index of emotional intelligence is proved. The step-by-step model of integration of augmented reality components influencing the ability to analyze, understand and regulate emotional states into a complex program of emotional intelligence development is demonstrated. According to the results of the formative study, there is a dominance of high indicators of the following components: intrapersonal (50%), interpersonal (53.3%). Thus, we can say that intrapersonal and interpersonal emotional intelligence together involve the actualization of various cognitive processes and skills, and are related to each other. Empirical data were obtained as a
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Computer Aided Technologies » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie