Bibliographies thématiques / Computer-aided design

Littérature scientifique sur le sujet « Computer-aided design »

Auteur : Grafiati
Publié le 4 juin 2021
Mis à jour le 6 juillet 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Computer-aided design ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Computer-aided design"

1

Rudolph, H., R. G. Luthardt et M. R. Graf. « „Computer aided design/computer aided manufacturing“ ». Der Freie Zahnarzt 59, no 7-8 (juillet 2015) : 62–72. http://dx.doi.org/10.1007/s12614-015-5448-7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Komali, Uppada, et Rajesh CVS. « Analysis of Computer Aided Design Employed in Landscape Design ». International Journal of Trend in Scientific Research and Development Volume-2, Issue-5 (31 août 2018) : 1931–36. http://dx.doi.org/10.31142/ijtsrd18230.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kolbasin, Alexander, et Oksana Husu. « Computer-aided design and Computer-aided engineering ». MATEC Web of Conferences 170 (2018) : 01115. http://dx.doi.org/10.1051/matecconf/201817001115.

Texte intégral
Résumé :
In modern industrial production some of the major factors of successful development include: cost reduction of the production, im-provement of its quality, as well as help to minimise the time in market en-try. Computer-aided design and Computer-aided engineering (CAD / CAE - systems) are the most effective for implementation of these requirements. Possible use of this engineering modeling simulation in conjunction with the power and speed of high performance computing could reduce costs and time of each cycle of designing, and also significantly reduce devel-opment time. The introduction of new technologies, the use of high quality products and engagement of qualified personnel would allow businesses and organizations to get on a path of innovative development of design and production systems.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Gustafson, Jolene. « Computer-aided design ? » ACM SIGDOC Asterisk Journal of Computer Documentation 18, no 4 (novembre 1994) : 42–44. http://dx.doi.org/10.1145/192433.199174.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Matela, R. « Computer-aided design ». Computer-Aided Design 25, no 5 (mai 1993) : 327. http://dx.doi.org/10.1016/0010-4485(93)90091-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

O'Connell, Colette. « CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) ». Science & ; Technology Libraries 7, no 4 (25 novembre 1987) : 127–54. http://dx.doi.org/10.1300/j122v07n04_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Ruffle, S. « Architectural design exposed : from computer-aided drawing to computer-aided design ». Environment and Planning B : Planning and Design 13, no 4 (1986) : 385–89. http://dx.doi.org/10.1068/b130385.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Shvets, Pavlo, Olena Lebedeva et Viktor Bondarenko. « The computer-aided design of rubber-metal products ». Odes’kyi Politechnichnyi Universytet. Pratsi, no 3 (23 décembre 2015) : 36–40. http://dx.doi.org/10.15276/opu.3.47.2015.10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Togay, Abdullah, Merve Coşkun, Serkan Güneş et Çiğdem Güneş. « Computer aided design in education and its’ interpretation through design thinking ». New Trends and Issues Proceedings on Humanities and Social Sciences 2, no 1 (19 février 2016) : 328–37. http://dx.doi.org/10.18844/gjhss.v2i1.315.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Couldwell, William T., Joel D. MacDonald, Charles L. Thomas, Bradley C. Hansen, Aniruddha Lapalikar, Bharat Thakkar et Alagar K. Balaji. « Computer-aided design/computer-aided manufacturing skull base drill ». Neurosurgical Focus 42, no 5 (mai 2017) : E6. http://dx.doi.org/10.3171/2017.2.focus16561.

Texte intégral
Résumé :
The authors have developed a simple device for computer-aided design/computer-aided manufacturing (CAD-CAM) that uses an image-guided system to define a cutting tool path that is shared with a surgical machining system for drilling bone. Information from 2D images (obtained via CT and MRI) is transmitted to a processor that produces a 3D image. The processor generates code defining an optimized cutting tool path, which is sent to a surgical machining system that can drill the desired portion of bone. This tool has applications for bone removal in both cranial and spine neurosurgical approaches. Such applications have the potential to reduce surgical time and associated complications such as infection or blood loss. The device enables rapid removal of bone within 1 mm of vital structures. The validity of such a machining tool is exemplified in the rapid (< 3 minutes machining time) and accurate removal of bone for transtemporal (for example, translabyrinthine) approaches.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Computer-aided design"

1

Abdul, Karim Mohamad Sharis. « Computer-aided aesthetics in evolutionary computer aided design ». Thesis, Loughborough University, 2004. https://dspace.lboro.ac.uk/2134/27913.

Texte intégral
Résumé :
This thesis presents research into the possibility of developing a computerised system that can evaluate the aesthetics and engineering aspects of solid shapes. One of the research areas is also to include such an evaluation system into an existing evolutionary CAD system which utilizes the Genetic Algorithms (GAs) technology. An extensive literature survey has been carried out to better understand and clarify the vagueness and subjectivity of the concept of aesthetics, which leads to the work of defining and quantifying a set of aesthetic parameters. This research achieves its novelty in aiming to assist designers in evaluating the aesthetics and functional aspects of designs early in the conceptual design stage, and its inclusion into an evolutionary CAD system. The field of Computer Aided Design (CAD) lacks the aesthetics aspect of the design, which is very crucial in evaluating designs especially considering the trend towards virtual prototypes replacing physical prototypes. This research has managed to suggest, define and quantify a set of aesthetic and functional elements or parameters, which will be the basis of solid shape evaluation. This achievement will help designers in determining the fulfilment of design targets, where the designers will have a full control to determine the priority of each evaluation element in the developed system. In achieving this, computer software including a programming language package and CAD software are involved, which eventually led to the development of a prototype system called Computer Aided Aesthetics and Functions Evaluation (CAAFE). An evolutionary CAD system called Evolutionary Form Design (EFD), which utilizes GAs, has been available for few years now. It evolves shapes for quick and creative suggestions, however it lacks the automated evaluation and aesthetics aspects of the design. This research has worked into the integrating of CAAFE into EFD, which led to a system that could evolve objects based on a selected and weighed aesthetic and functional elements. Finally, surveys from users have also been presented in this thesis to offer improvement to the scoring system within the CAAFE system.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Siu, Selina. « Computer Aided Ferret Design ». Thesis, University of Waterloo, 2003. http://hdl.handle.net/10012/1184.

Texte intégral
Résumé :
Ferrets are amusing, flexible creatures that have been under represented in computer models. Because their bodies can assume almost any curved shape, splines are the natural tool for modelling ferrets. Surface pasting is a hierarchical method of modelling with spline surfaces, where features are added onto a base surface. Existing surface pasting techniques are limited to modelling rectilinear shapes. Using the task of modelling a ferret as a driving force, I propose a method of pasting cylinders in world space; I looked at methods for reducing distortion of pasted features; and I created a method for pasting trimmed features to allow for features that do not have the rectilinear shape of standard pasting. With my methods, modelling ferrets with surface pasting is easier, and the resulting models are closer to a real ferret.
Styles APA, Harvard, Vancouver, ISO, etc.
3

李淑儀 et Shuk-yee Wendy Lee. « Computer aided facilities design ». Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1987. http://hub.hku.hk/bib/B31208277.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Liu, Hsueh-wen, et Chin-Hwa Lee. « Computer aided filter design ». Thesis, Monterey, California : U.S. Naval Postgraduate School, 1987. http://hdl.handle.net/10945/22682.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kandil, Sahar. « Computer aided drug design ». Thesis, Cardiff University, 2009. http://orca.cf.ac.uk/55845/.

Texte intégral
Résumé :
Hepatitis C virus (HCV) chronic infection represents one of the major and still unresolved health problems. HCV infecting 3% of the world population, leading to chronic hepatitis, liver cirrhosis and hepatocellular carcinoma in addition to the extrahepatic manifestations. No efficient therapy exists; the standard dual treatment with peg IFN-alpha and ribavirin is effective only in 55% of the selected cases with substantial side effects in addition to the high cost. To date, there is no vaccine against HCV due to the high variability of the RNA genome. NS3 helicase is one of the non-structural proteins whose activity is indispensable for viral RNA replication and its inhibition is estimated to arrest viral proliferation and indirectly stimulate a cellular antiviral response against ds RNA. In our project we proposed to use structure based knowledge of the x-ray crystal structure of helicase enzyme to design and synthesise different scaffolds of novel potential HCV NS3 helicase inhibitors. Using different computer software packages, we manage to design a number of small focused libraries of compounds, which were used for docking simulations. The results obtained in silico guided the selection of two series of promising compounds for synthesis. In the first series; several quinazoline derivatives were prepared and evaluated for antiviral activity in subgenomic replicon assay showing EC50 in the low muM range with relatively high selectivity index. In the second series of pyrrole or phenyl based compounds, irreversible inhibition of helicase is assumed through addition to the electrophilic warheads of the alpha,beta-unsaturated ketones, thiols or 1,2,4 thiadiazoles based inhibitors. Among the synthesised compounds a number showed a sub muM activity in the helicase enzyme assay. These promising findings are considered to be a starting point for further optimisation of structure, activity and toxicity relationships.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Yazdanpanah, Amir. « Computer aided fatigue design ». Thesis, Sheffield Hallam University, 1990. http://shura.shu.ac.uk/20587/.

Texte intégral
Résumé :
Today's competitive market requires engineers to produce reliable light weight products at low cost. This can be achieved by more effective use of computer aided engineering tools during early stages of the design process. A research programme has been undertaken to investigate the data requirements of integrating commercially available software packages (finite element analysis and fatigue life evaluation) to evaluate the integrity and durability of engineering components at the conceptual design stage. A real engineering component, in the form of a steering arm, supplied by a European truck manufacturer was used as a basis for the investigation. This is a typical vehicle component, in which, under service loading conditions, a multiaxial state of stress occurs. A geometric model of the component was created using the Prime "MEDUSA" software suite. The model was used to locate the boundary co-ordinates necessary for the development of a PAFEC Finite Element model. By imposing the conditions experienced during the service, the critical areas of the component were identified by analysing the F.E. model and a detailed description of the elastic stress/strain fields were also established. These were incorporated in an energy density approach and Neuber's uniaxial analysis to predict total local elastic/plastic strains at these critical- locations. These were compared with strain gauge measurements. The calculated results were used to plot a number of load/local strain calibration curves for the development of a load history, suitable for experimental fatigue life assessment. Fatigue crack initiation tests were performed on the steering arm using a computer controlled DARTEC multiaxial fatigue testing machine. Fatigue life assessment based on full service loading was carried out using a software package based on the critical location approach. A comparison of computerised, experimental and actual test circuit fatigue lives has been made. The work enabled a specification to be produced for the integration of the two items of software. This integrated software was developed by third parties and used to produce a computerised life map of the steering arm.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Дядечко, Алла Миколаївна, Алла Николаевна Дядечко, Alla Mykolaivna Diadechko et V. Zakharchenko. « Computer-aided design (CAD) ». Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/18296.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Lee, Shuk-yee Wendy. « Computer aided facilities design / ». [Hong Kong : University of Hong Kong], 1987. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12262559.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Sun, Kun. « Computer-aided creative mechanism design / ». [S.l.] : [s.n.], 1994. http://library.epfl.ch/theses/?nr=1271.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Zhuang, Minxia. « Computer aided PID controller design ». Thesis, University of Sussex, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332252.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Computer-aided design"

1

Encarnação, José L., Rolf Lindner et Ernst G. Schlechtendahl. Computer Aided Design. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84054-8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

1948-, Johnson J., et Open University. Computer Aided Design Course Team., dir. Computer aided design. Milton Keynes : Open University, 1990.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Open University. Computer Aided Design Course Team., dir. Computer aided design. [Milton Keynes] : Open University, 1987.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

1948-, Johnson J., et Open University. Computer Aided Design Course Team., dir. Computer aided design. Milton Keynes : Open University, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

1948-, Johnson J., et Open University. Computer Aided Design Course Team., dir. Computer aided design. Milton Keynes : Open University, 1990.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Taylor, Dean L. Computer-aided design. Reading, Mass : Addison-Wesley, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Pauline, Curtis, Steadman Philip 1942- et Open University. Computer Aided Design Course Team., dir. Computer aided design. [Milton Keynes] : Open University, 1987.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

1948-, Johnson J., et Open University. Computer Aided Design Course Team., dir. Computer aided design. Milton Keynes : Open University, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

1948-, Johnson J., et Open University. Computer Aided Design Course Team., dir. Computer aided design. Milton Keynes : Open University, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kloos, Carlos Delgado, et Abelardo Pardo, dir. EduTech Computer-Aided Design Meets Computer-Aided Learning. Boston, MA : Springer US, 2004. http://dx.doi.org/10.1007/b98988.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Computer-aided design"

1

Meguid, S. A. « Computer-Aided Design ». Dans Integrated Computer-Aided Design of Mechanical Systems, 25–83. Dordrecht : Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3409-2_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Lutters, Eric. « Computer-Aided Design ». Dans CIRP Encyclopedia of Production Engineering, 1–3. Berlin, Heidelberg : Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_6443-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Gooch, Jan W. « Computer-Aided Design ». Dans Encyclopedic Dictionary of Polymers, 163. New York, NY : Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2782.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Schaback, Robert, et Helmut Werner. « Computer-Aided Design ». Dans Springer-Lehrbuch, 202–25. Berlin, Heidelberg : Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-662-09022-0_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Lutters, Eric. « Computer-Aided Design ». Dans CIRP Encyclopedia of Production Engineering, 325–27. Berlin, Heidelberg : Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_6443.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Lutters, Eric. « Computer-Aided Design ». Dans CIRP Encyclopedia of Production Engineering, 252–54. Berlin, Heidelberg : Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_6443.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Kumar, V., M. D. German, S. J. Lee, E. Atrek, R. Kodali, A. D. Belegundu, S. D. Rajan et al. « Computer-Aided Design ». Dans CAD/CAM Robotics and Factories of the Future, 1–116. Berlin, Heidelberg : Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52323-6_1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Zimmers, Emory W. « Computer-Aided Design ». Dans Mechanical Engineers' Handbook, 642–724. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2006. http://dx.doi.org/10.1002/0471777447.ch19.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Rosato, Donald V., David P. Di Mattia et Dominick V. Rosato. « Computer-Aided Design ». Dans Designing with Plastics and Composites : A Handbook, 757–88. Boston, MA : Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-9723-0_10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Bi, Zhuming. « Computer-Aided Design ». Dans Practical Guide to Digital Manufacturing, 35–116. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70304-2_2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Computer-aided design"

1

Thelen, Alfred. « Computer aided design ». Dans Optical Interference Coatings. Washington, D.C. : Optica Publishing Group, 1997. http://dx.doi.org/10.1364/oic.1998.wd.1.

Texte intégral
Résumé :
Examples are the calculation of transmittance, reflectance, and phase as a function of wavelength, sensitivity of thin film structures to thickness and index errors, electrical field calculations, parameters for design models (equivalent indices, effective interfaces, Chebyshev prototypes, Fourier synthesis, etc.), scattering models, etc.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Wilden, J., H. Frank et T. Müller. « Computer Aided Coating Design ». Dans ITSC 2000, sous la direction de Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0211.

Texte intégral
Résumé :
Abstract The crystal structure of the coating depends on the splashing and solidification of the sprayed particles. The splashing of the particles is simulated by commercial software taking temperature dependent parameters like melt viscosity and surface tension into account. This article provides the theoretical background and the experimental verification. The steps of simulation solidification, splashing, and heat and momentum transfer help to develop novel coating systems with defined microstructure and shorten the time to market. Experimental investigations were carried out using Ni and Ni/Cr 80/20 spray powders with a mean particle diameter of about 15 μm. The theoretical investigations to describe the flattening process of a droplet show the influence of particle velocity and temperature. It was shown that different material parameters, as latent heat or surface energy, have a significant influence on the simulation results.
Styles APA, Harvard, Vancouver, ISO, etc.
3

WALKER, CARRIE. « Computer-aided system design ». Dans 8th Computing in Aerospace Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1991. http://dx.doi.org/10.2514/6.1991-3940.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Hanna, J. R. P. « Relational computer-aided design ». Dans IEE Colloquium on Design Systems with Users in Mind : The Role of Cognitive Artefacts. IEE, 1995. http://dx.doi.org/10.1049/ic:19951498.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Sowa, Agnieszka. « Computer-Aided Architectural Design vs. Architect-Aided Computing Design ». Dans eCAADe 2005 : Digital Design : The Quest for New Paradigms. eCAADe, 2005. http://dx.doi.org/10.52842/conf.ecaade.2005.229.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Huang, Ledan. « Computer aided design of portable computer ». Dans 2015 3rd International Conference on Mechanical Engineering and Intelligent Systems. Paris, France : Atlantis Press, 2015. http://dx.doi.org/10.2991/icmeis-15.2015.96.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Andrews, G. C., et J. D. Argent. « Computer-Aided Optimal Gear Design ». Dans ASME 1992 Design Technical Conferences. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/detc1992-0049.

Texte intégral
Résumé :
Abstract Gear-sets designed using standard tooth profiles are rarely optimum strength designs, where “optimum strength” is defined as the maximum tooth bending strength for minimum tooth numbers and tooth size. However, standard tooth profiles are widely used because of the difficulty of determining the amount of hob (or rack) “offset” necessary to cut optimum strength non-standard gears. Also, stresses are not easily calculated for non-standard tooth profiles since geometry factors (I and J) are not tabulated. This paper describes a computer-aided method for obtaining optimum strength designs of spur gears, through iterative strength calculations. Two common cases are considered in which a non-standard gear-set is to replace a standard gear-set with the same center distance. When the speed ratio must be rigidly maintained, the “long and short addendum method” can be used; when minor variations in speed ratio are permissible, the “non-standard center distance” method can be used and much larger increases in strength can be achieved. The methods are illustrated by a numerical example. Increases of strength in the range of 10 to 20 percent are typical when standard gears-sets are replaced by non-standard gears with the same center distance, assuming material properties remain constant. The procedure for estimating the hob offsets which yield optimum design is simple and novel, and has proved efficient in obtaining convergence in a few iterations of the optimization process.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Gong, Guangjun, et Shoulan Gao. « Application of computer-aided design and computer-aided engineering in hydraulic press design ». Dans International Conference on Mechanical Design and Simulation (MDS 2022), sous la direction de Dongyan Shi et Guanglei Wu. SPIE, 2022. http://dx.doi.org/10.1117/12.2638799.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Jordan, J. Peter. « ARCH 431 : Computer-Aided Design ». Dans ACADIA 1988 : Computing In Design Education. ACADIA, 1988. http://dx.doi.org/10.52842/conf.acadia.1988.187.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

ROWLAND, M., et W. WAGONER. « Computer aided crewstation information allocation ». Dans Aircraft Systems, Design and Technology Meeting. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1986. http://dx.doi.org/10.2514/6.1986-2734.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Computer-aided design"

1

Ball, Alex. Preserving Computer-Aided Design (CAD). Digital Preservation Coalition, avril 2013. http://dx.doi.org/10.7207/twr13-02.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Briggs, M. G. Computer-Aided dispatching system design specification. Office of Scientific and Technical Information (OSTI), mai 1996. http://dx.doi.org/10.2172/325291.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Briggs, M. G. Computer-Aided dispatching system design specification. Office of Scientific and Technical Information (OSTI), septembre 1996. http://dx.doi.org/10.2172/328471.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Briggs, M. G. Computer-aided dispatching system design specification. Office of Scientific and Technical Information (OSTI), décembre 1997. http://dx.doi.org/10.2172/10148252.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kuehmann, Charles J., et Gregory B. Olson. Computer-Aided Systems Design of Advanced Steels,. Fort Belvoir, VA : Defense Technical Information Center, janvier 1995. http://dx.doi.org/10.21236/ada324751.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Potts Steves, Michelle, Simon Frechette, John T. Foreman et William B. Anderson. Viewing Technologies for Computer-Aided Design Models. Fort Belvoir, VA : Defense Technical Information Center, septembre 2003. http://dx.doi.org/10.21236/ada418350.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Palyulin, Vladimir A. Computer-Aided Synthesis Design of Energetic Compounds. Fort Belvoir, VA : Defense Technical Information Center, novembre 2008. http://dx.doi.org/10.21236/ada525358.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Razavi, H. C., R. K. Mehra et M. Vidyasagar. Computer-Aided Design of Robust Decentralized Controllers. Fort Belvoir, VA : Defense Technical Information Center, août 1985. http://dx.doi.org/10.21236/ada160118.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Muthukrishnan, S. Computer aided optimal design of helical gears. Portland State University Library, janvier 2000. http://dx.doi.org/10.15760/etd.6075.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Letellier, J. P., John Hines, Barry Periman, James Dayton, Nicholas Naclerio, Robert Jackson, Jacob Abraham, Lowell Aspholm, James Aylor et James Clary. Special Technology Area Review on Computer Aided Design. Fort Belvoir, VA : Defense Technical Information Center, mars 1993. http://dx.doi.org/10.21236/ada285813.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Computer-aided design » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie