Bibliographies thématiques / Characterization of Nickel

Littérature scientifique sur le sujet « Characterization of Nickel »

Auteur : Grafiati
Publié le 11 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Characterization of Nickel ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Characterization of Nickel"

1

B. Govindaraj, B. Govindaraj, Arunkumar Lagashetty et A. Venkataraman A. Venkataraman. « Synthesis, Characterization and d.c conductivity of Nano sized Nickel Oxide ». Indian Journal of Applied Research 3, no 6 (1 octobre 2011) : 60–61. http://dx.doi.org/10.15373/2249555x/june2013/21.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Lucyszyn, Stepan. « Microwave Characterization of Nickel ». PIERS Online 4, no 6 (2008) : 686–90. http://dx.doi.org/10.2529/piers080119215655.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Fritz, T., H. S. Cho, K. J. Hemker, W. Mokwa et U. Schnakenberg. « Characterization of electroplated nickel ». Microsystem Technologies 9, no 1-2 (1 novembre 2002) : 87–91. http://dx.doi.org/10.1007/s00542-002-0199-1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Qin, Hui Ru, Ji Min Xie, Jun Jie Jing, Wen Hua Li et Zhi Feng Jiang. « Preparation and Characterization of Nickel Nanopowder for Conductive Pastes ». Advanced Materials Research 347-353 (octobre 2011) : 3485–88. http://dx.doi.org/10.4028/www.scientific.net/amr.347-353.3485.

Texte intégral
Résumé :
In this paper, nickel nanopowder was prepared by liquid phase reduction method, where nickel acetate and hydrazine hydrate was used as nickel source and reducing agent, respectively. The resulting Ni nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM). The results showed that nickel acetate can be effectively reduced by hydrazine hydrate. The as-prepared nickel nanoparticles are in spherical shape, with size ranging from 100 to 200nm and good dispersion. By changing the reaction conditions, the morphology and size of nickel particles can be controlled. The synthesized nickel nanopowders meet the general requirements of nickel powder that would be used for conductive paste, which can be prepared for nickel-based conductive paste. This method has some advantages such as inexpensive, non-pollution to environment; it can be used for industry.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Brieu, M., J. J. Couderc, A. Rousset et R. Legros. « TEM characterization of nickel and nickel-cobalt manganite ceramics ». Journal of the European Ceramic Society 11, no 2 (janvier 1993) : 171–77. http://dx.doi.org/10.1016/0955-2219(93)90049-w.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Jiang, Ning, Shuang Ling Jin, Xia Shao, Hua Feng Zhang, Zhi Jun Li, Shi Min Zhang, Ming Lin Jin et Rui Zhang. « Synthesis and Characterization of Ni-Doped Carbon Aerogels ». Advanced Materials Research 1061-1062 (décembre 2014) : 133–36. http://dx.doi.org/10.4028/www.scientific.net/amr.1061-1062.133.

Texte intégral
Résumé :
The carbon aerogels doped with nickel were produced by sol-gel, supercritical ethanol drying, and high-temperature carbonization, using resorcinol-furfural as carbon source, nickel nitrate as nickel source, absolute ethanol as dispersion medium, 1,2-epoxypropane as gel initiator, polyacrylic acid as the chelating agent. The carbon aerogels were characterized by nitrogen adsorption and XRD. The effects of the molar ratio of 1,2-epoxypropane to nickel on porosity of the Ni-doped carbon aerogels were investigated. It is found that the Ni-doped carbon aerogels have abundant mesopores and the doped nickel is dispersed in samples in metallic state and oxide or pure metal depending on the preparation conditions. The mesopore volume and average mesopore size all increase with the ratio of 1,2-epoxypropane to nickel.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Li, Chang Yu, Shou Xin Liu et Li Li Liu. « Preparation and Characterization of Flowerlike Nickel Oxide ». Applied Mechanics and Materials 121-126 (octobre 2011) : 1044–48. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.1044.

Texte intégral
Résumé :
Flowerlike nickel oxide was synthesized by a simple liquid-phase process to obtain the hydroxide precursor and then calcined to form the nickel oxide. The precursor and the nickel oxide were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG) , the scanning electron microscope(SEM) and Brunauer–Emmett–Teller-specific surface area measurement. The results indicated α-Nickel hydroxide was transferred to NiO with a cubic crystalline structure after being calcined at 450 °C; the NiO still kept the morphology of the precursors and the specific surface area of the NiO was 125.2m2/g.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Pramana, Yanatra Budi, Bramianto Setiawan, Prihono Prihono, Yitno Utomo, Marianus Subandowo et Krisyanti Budipramana. « A SIMPLE SYNTHESIS OF NICKEL OXIDE NANOTUBE USING HIGH VOLTAGE ELECTROLYSIS ». Jurnal Neutrino 13, no 1 (2 février 2021) : 13–18. http://dx.doi.org/10.18860/neu.v13i1.10224.

Texte intégral
Résumé :
Recently, the development of nanoparticle nickel oxide has increased due to their potential application such as biosensors, catalysts, solar cells, supercapacitors, and batteries. In this work, the addition of CTAB for nickel oxide nanoparticle synthesis using electrolysis was investigated. The nickel plates were used as anode and cathode in the electrolysis process. The process was operated at a constant voltage of 60 V for 30 minutes. The XRD result showed conformity with the Nickel oxide diffraction pattern. Meanwhile, the impurity from nickel hydroxide peaks still appeared. From FTIR characterization also indicates the band of Ni-O stretching vibration. The morphology characterization of nickel oxide using Scanning Electron Microscopy (SEM) showed the nanotube structure, while Transmission Electron Microscopy showed the nanoparticle size from 250.44 to 325.60 nm in length. On the other hand, the transformation of Ni(OH)2 to NiO has been shown using TGA characterization.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Massarotti, V., D. Capsoni, V. Berbenni, R. Riccardi, A. Marini et E. Antolini. « Structural Characterization of Nickel Oxide ». Zeitschrift für Naturforschung A 46, no 6 (1 juin 1991) : 503–12. http://dx.doi.org/10.1515/zna-1991-0606.

Texte intégral
Résumé :
AbstractIt is known from the literature that a slight distortion of the ideal cubic cell is present in the NiO structure. This work shows that such a distortion can be accurately evaluated by means of a refinement of the structural and profile parameters of X-ray powder diffraction data. Moreover, since only small amounts of products are sometimes at disposal to perform structural characterizations, it was thought useful to extend the refinement procedure to X-ray data collected on NiO samples of much lower mass (15-60 mg) than those usually utilized in X-ray diffractometric studies. The results obtained show that reliable structural parameters can be obtained from low mass samples too
Styles APA, Harvard, Vancouver, ISO, etc.
10

Uchiyama*, Souichi, Yasuo Obayashi, Toshiaki Hayasaka et Noboru Kawata. « Characterization of coprecipitated nickel catalysts ». Applied Catalysis 47, no 1 (février 1989) : 155–63. http://dx.doi.org/10.1016/s0166-9834(00)83271-6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Characterization of Nickel"

1

Bansa, Patrice B. « Property characterization of CVD nickel ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ63137.pdf.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Hissam, Jason C. « Characterization of nickel-substituted hexaaluminate catalysts ». Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5999.

Texte intégral
Résumé :
Thesis (M.S.)--West Virginia University, 2008.
Title from document title page. Document formatted into pages; contains vii, 78 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 74-76).
Styles APA, Harvard, Vancouver, ISO, etc.
3

CORTEZ, ORFELINDA AVALO. « SYNTHESIS AND CHARACTERIZATION OF NANOSTRUCTURED IRON-NICKEL ALLOYS ». PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2008. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=12975@1.

Texte intégral
Résumé :
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
Oxido de níquel e hematita nanoestruturadas foram sintetizadas a partir da decomposição térmica de nitrato de níquel hexahidratado e nitrato férrico nonahidratado respectivamente, na faixa de temperatura de 350-450°C com variações no tempo reacional. Os tamanhos de cristalito do NiO e Fe2O3 foram estimados a partir dos difractogramas de Difração de Raios-X (XRD) utilizando os software PowderCell e Topas. Foi observado que o tamanho de cristalito varia em função da temperatura de sínteses. O resultado mais significante foi observado nos cristalitos de NiO os quais aumentam de 31 nm (T=350°C, 3hr) a 98 nm (T=450°C, 5hr). Foram realizados estudos cinéticos da redução NiO e Fe2O3 por hidrogênio na faixa de temperatura de 250-600°C. Ligas ferroníquel nanoestruturadas com composições FexNi100-x (x = 25, 50, and 75 w%) têm sido preparadas com sucesso por decomposição térmica de nitratos (formação de óxidos) e posterior redução com hidrogênio a 700ºC (formação das ligas). As ligas Fe-Ni, caracterizadas por difração de raios-X mostraram tamanhos de cristalito da ordem de 25nm. A fase rica em Ni, liga Fe25Ni75, apresentou uma estrutura γ(FCC). A liga Fe50Ni50 apresentou a existência de uma estrutura tetragonal. A fase rica em Fe, liga Fe75Ni25, contém uma mistura de fases α(BCC) e γ(FCC). A coexistência das fases e atribuída à segregação de fases que acontece nestas ligas como resultado da difusão atômica. A partir dos resultados das medições magnéticas efetuadas a 300K, pode-se estabelecer que as ligas Fe-Ni nanoestruturadas tem um comportamento superparamagnético.
Nickel oxide and hematite nanostructured were successfully prepared by thermal decomposition from nickel nitrate hexahydrate and ferric nitrate nonahydrate in the temperature range of 350-450°C with variation of the time. The average crystallite sizes of NiO and Fe2O3 were estimated from X-ray diffraction (XRD) peaks using the PowderCell and Topas software. We observed that the crystallite size changes as a function of synthesis temperature. The significant result was the large size of the resulting NiO crystallites, which increased from 31nm (T=350°C, 3hr) to 98nm (T=450°C, 5hr). Kinetic studies of the reduction of NiO and Fe2O3 by hydrogen in the temperature range 250-600°C have been investigated. Nanostructured Fe-Ni alloys with compositions FexNi100-x (x = 25, 50, and 75 w%) have been successively prepared by thermal decomposition from mixtures of nitrates (formation of oxides) and reduction by hydrogen at 700ºC (formation of alloys). The Fe-Ni alloys, characterized by X-ray diffraction show crystallites sizes about 25nm. The Nirich phase, Fe25Ni75 alloys show the existence of γ(FCC) phase. The Fe50Ni50 alloy show the existence of tetragonal phase. The Fe-rich phase, Fe75Ni25 alloy, contain a mixture of α(BCC) and γ(FCC) phases. The coexistence of these phases is attributed to phase segregation occurring in these alloys as a result of enhanced atomic diffusion. It was inferred from results of magnetic measurements at 300K, that nanostructured Fe-Ni alloys were in a superparamagnetic state.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Silva, Cauê Corrêa da. « Manufacturing and characterization of aluminium-nickel matrix composites ». reponame:Repositório Institucional da UFSC, 2015. https://repositorio.ufsc.br/xmlui/handle/123456789/162713.

Texte intégral
Résumé :
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia Mecânica, Florianópolis, 2015.
Made available in DSpace on 2016-05-24T17:40:40Z (GMT). No. of bitstreams: 1 338916.pdf: 1608467 bytes, checksum: 23dec638e6d54767a7815bbbc05e726e (MD5) Previous issue date: 2015
Abtsract : The present work describes the designing of a manufacturing process for the production of aluminum matrix composites reinforced with carbon fibers. The matrix was chosen to be an interlayering of aluminum foils and nickel mesh stripes, cold rolled with 70% of thickness reduction, being then submitted to different heat treatments, of which immersion in pure aluminum melt was found to be the most promising. Microstructure and composition of the samples were analyzed with scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffractography and microhardness test, whose results showed the presence of remaining nickel and intermetallic compounds formed during the processing, namely Ni2Al3 and NiAl, agreeing with studies on reactive diffusion found in the literature. Furthermore, composites were produced by incorporating nickel-coated carbon fibers to the manufacturing process, being evaluated the effect of the fibers addition to the material with scanning electron microscopy, energy-dispersive Xray spectroscopy, X-ray diffractography and fiber content estimation via image binarization. Intermetallic phases were also present in the microstructure of the composites, nevertheless in smaller extent and in an aluminum matrix. Bond between matrix and fibers was found to be strong, since no fiber pull out took place. Performed fiber content analysis showed that the optimum fiber volume content is between 15% and 40%. Mechanical properties of both without and with fibers materials were assessed through 4-point bending tests, having theirfracture surface analyzed afterwards.

O presente trabalho descreve o desenvolvimento de um processo de fabricação para a produção de compósitos de matriz de alumínio reforçados com fibras de carbono. O material escolhido para a matriz era constituído por camadas intercaladas de folhas de alumínio e malha de níquel, laminadas a frio com 70% de redução de espessura, sendo então submetidos a diferentes tratamentos térmicos, dentre os quais imersão em fundido de alumínio mostrou-se o mais promissor. A microestrutura e a composição das amostras foram analisadas com microscopia eletrônica de varredura, espectroscopia dispersiva de raios-X, difratografia de raios-X e testes de microdureza, cujos resultados mostraram a presença de níquel remanescente e compostos intermetálicos, Ni2Al3 e NiAl, coincidindo com estudos sobre difusão reativa encontrados na literatura. Além disso, compósitos foram produzidos através da incorporação de fibras de carbono revestidas com níquel ao processo de fabricação, sendo avaliados os efeitos da adição de fibras ao material com microscopia eletrônica de varredura, espectroscopia dispersiva de raios-X, difratografia de raios-X e estimativa do teor de fibras através de binarização de imagens. Fases intermetálicas também estavam presentes na microestrutura do compósito, entretanto em menor quantidade e em uma matriz de alumínio. A adesão entre matriz e fibras foi avaliada como sendo alta, visto que não ocorrou o fenômeno de pull out das fibras. As análises de teor de fibra mostraram que o volume de fibras ótimo encontra-se entre 15% e 40%. Tanto propriedades mecânicas do material sem fibra, quanto do com fibra, foram aferidos com teste de flexão em 4 pontos, posteriormente tendo sua superfície de fratura analisada.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Silva, Cauê Corrêa da. « Manufacturing and characterization of aluminium-nickel matrix composites ». reponame:Repositório Institucional da UFSC, 2015. https://repositorio.ufsc.br/xmlui/handle/123456789/169520.

Texte intégral
Résumé :
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia Mecânica, Florianópolis, 2015.
Made available in DSpace on 2016-10-19T13:04:45Z (GMT). No. of bitstreams: 1 338916.pdf: 1608467 bytes, checksum: 23dec638e6d54767a7815bbbc05e726e (MD5) Previous issue date: 2015
Abtsract : The present work describes the designing of a manufacturing process for the production of aluminum matrix composites reinforced with carbon fibers. The matrix was chosen to be an interlayering of aluminum foils and nickel mesh stripes, cold rolled with 70% of thickness reduction, being then submitted to different heat treatments, of which immersion in pure aluminum melt was found to be the most promising. Microstructure and composition of the samples were analyzed with scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffractography and microhardness test, whose results showed the presence of remaining nickel and intermetallic compounds formed during the processing, namely Ni2Al3 and NiAl, agreeing with studies on reactive diffusion found in the literature. Furthermore, composites were produced by incorporating nickel-coated carbon fibers to the manufacturing process, being evaluated the effect of the fibers addition to the material with scanning electron microscopy, energy-dispersive Xray spectroscopy, X-ray diffractography and fiber content estimation via image binarization. Intermetallic phases were also present in the microstructure of the composites, nevertheless in smaller extent and in an aluminum matrix. Bond between matrix and fibers was found to be strong, since no fiber pull out took place. Performed fiber content analysis showed that the optimum fiber volume content is between 15% and 40%. Mechanical properties of both without and with fibers materials were assessed through 4-point bending tests, having theirfracture surface analyzed afterwards.

O presente trabalho descreve o desenvolvimento de um processo de fabricação para a produção de compósitos de matriz de alumínio reforçados com fibras de carbono. O material escolhido para a matriz era constituído por camadas intercaladas de folhas de alumínio e malha de níquel, laminadas a frio com 70% de redução de espessura, sendo então submetidos a diferentes tratamentos térmicos, dentre os quais imersão em fundido de alumínio mostrou-se o mais promissor. A microestrutura e a composição das amostras foram analisadas com microscopia eletrônica de varredura, espectroscopia dispersiva de raios-X, difratografia de raios-X e testes de microdureza, cujos resultados mostraram a presença de níquel remanescente e compostos intermetálicos, Ni2Al3 e NiAl, coincidindo com estudos sobre difusão reativa encontrados na literatura. Além disso, compósitos foram produzidos através da incorporação de fibras de carbono revestidas com níquel ao processo de fabricação, sendo avaliados os efeitos da adição de fibras ao material com microscopia eletrônica de varredura, espectroscopia dispersiva de raios-X, difratografia de raios-X e estimativa do teor de fibras através de binarização de imagens. Fases intermetálicas também estavam presentes na microestrutura do compósito, entretanto em menor quantidade e em uma matriz de alumínio. A adesão entre matriz e fibras foi avaliada como sendo alta, visto que não ocorrou o fenômeno de pull out das fibras. As análises de teor de fibra mostraram que o volume de fibras ótimo encontra-se entre 15% e 40%. Tanto propriedades mecânicas do material sem fibra, quanto do com fibra, foram aferidos com teste de flexão em 4 pontos, posteriormente tendo sua superfície de fratura analisada.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Mwania, Tom Muinde. « Synthesis and characterization of nickel imine/amine complexes ; a possible model for nickel superoxide dismutase ». Thesis, Wichita State University, 2012. http://hdl.handle.net/10057/5416.

Texte intégral
Résumé :
Superoxide dismutases are ubiquitous enzymes that efficiently catalyze the disproportionation of superoxide radical anions to protect biological molecules from oxidative damage. Several SODs have been identified having different metals at their active sites. These include Mn SOD, Fe SOD, Cu/Zn SOD and, most recently, Ni SOD. The catalytic center of Ni SOD resides in the N-terminal active-site loop, where a Ni(II) is coordinated by the amine N of His-1, the amide N of Cys-2, and two thiolate S atoms of Cys-2 and Cys-6. In the oxidized form, Ni(III) adds the imidazole N of His-1 as an axial ligand. For the past decade, we have been developing methodology using 2, 2’-dithiodibenzaldehyde (DTDB) for the synthesis of metal complexes with mixed N/S coordination. We are reporting on the application of this methodology to the synthesis of model complexes for the active site of NiSOD, in which we have successfully synthesized and characterized three NiIIN2S2 complexes of imine/amine N donors: Ni(NNS)SPh (1), Ni(NNS)SPhNO2 (2) and Ni(NNS)StBu (3). These may be used as a model for reduced NiSOD, with future plans of comparing to complexes with amide/amine N donors, thus establishing the role of the amide.
Thesis (M.S.)--Wichita State University, College of Liberal Arts and Sciences, Dept. of Chemistry
Styles APA, Harvard, Vancouver, ISO, etc.
7

Arslan, Hulya. « Synthesis And Characterization Of Nickel Based Bulk Amorphous Alloys ». Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/3/12605099/index.pdf.

Texte intégral
Résumé :
The aim of this study is to synthesize and characterize new bulk amorphous alloys in the Ni- based systems. Theoretical studies on the basis of semi-empirical rules and the electronic theory of alloys in pseudopotential approximation has been provided in order to predict the impurity elements that will lead to an increase in the glass forming ability of Ni-based alloy systems. Glass forming ability of ten different compositions of alloys of Ni-Nb, Ni-Fe, Ni-B, Ni-Hf and Ni-Cr was simulated by using FORTRAN programs based on pseudopotential theory. In addition to the binary alloys, ternary alloys, which were formed by addition of 1 at% of third element to these systems, were also simulated. Since ordering energy is an indicator of glass forming ability, theoretical studies allowed to predict the effect of various third elements on the formation of amorphous phase. Furthermore, ordering energies were also used to calculate other parameters important for glass forming ability. In the second part of the study, on the basis of theoretical results, a series of casting experiments were done. Different compositions of Ni-Nb, Ni-Nb-Sn and Ni-Nb-Al alloys were cast in the centrifugal casting machine. Alloys were melted in alumina crucibles and cast into the copper moulds. Characterizations of cast alloys were done by the use of Metallography, SEM, XRD and DSC. Fully amorphous Ni52Nb41Al7 alloy was synthesized in bulk form with 0.8 mm thickness.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Huang, Shiliang. « Open-Framework Germanates and Nickel Germanates : Synthesis and Characterization ». Doctoral thesis, Stockholms universitet, Institutionen för material- och miljökemi (MMK), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-75495.

Texte intégral
Résumé :
Microporous materials have a wide range of important applications in separation, gas adsorption, ion-exchange and catalysis. Open-framework germanates are a family of microporous compounds and are of particular interest. This thesis focuses on the synthesis and characterization of new open-framework germanates as well as introducing the transition-metal nickel into germanate structures. One new microporous germanosilicate, SU-78 and four new open-framework germanates, SU-74, SU-75, SU-69 and SU-76 have been obtained by using organic molecules as structure directing agents (SDAs). The incorporation of nickel and organic SDAs in the synthesis resulted in five novel nickel germanates, SUT-1, SUT-2, SUT-3, SUT-4 and SUT-5, in which nickel complexes act either as framework-forming components or as structure directing agents. The general synthesis route is described and the variables that affect the synthesis products are summarized. Different techniques applied on the characterization of chemical and physical properties of the products are also introduced.

At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 1: Submitted. Paper 2: Submitted. Paper 3: Submitted. Paper 5: Manuscript.

Styles APA, Harvard, Vancouver, ISO, etc.
9

Bahr, Douglas. « Fracture mechanics characterization of a single crystal nickel alloy ». Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/19604.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Karim, Salma. « Preparation and characterization of supported and unsupported nickel complexes ». Thesis, Brunel University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.290951.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Characterization of Nickel"

1

Bansa, Patrice B. Property characterization of CVD nickel. Ottawa : National Library of Canada, 2001.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Yoo, Abraham. Microstructural and magnetic characterization of electrodeposited nanocrystalline nickel. Ottawa : National Library of Canada, 2003.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Center, Lewis Research, dir. Characterization and cycle tests of lightweight nickel electrodes. Cleveland, Ohio : Lewis Research Center, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Britton, Doris L. Characterization and cycle tests of lightweight nickel electrodes. Cleveland, Ohio : Lewis Research Center, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Chern, E. James. Eddy current characterization of magnetic treatment of materials. Greenbelt, Md : National Aeronautics and Space Administration, Goddard Space Flight Center, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Karim, Salma. Preparation and characterization of supported and unsupported nickel complexes. Uxbridge : Brunel University, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Robertson, Kevin. Characterization of nickel hydroxide sludge using the variable pressure SEM. Montréal, Qué : Dept.of Mining, Metals and Materials Engineering, McGill University, 2004.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

C, Wilcox Roy, et United States. National Aeronautics and Space Administration., dir. Determination of cleavage planes and fracture characterization of Ni-based single crystal superalloys : Final progress report. Auburn, AL : Dept. of Mechanical Engineering, Auburn University, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

G, Sandefur Paul, Young Clarence P et Langley Research Center, dir. Braze alloy process and strength characterization studies for 18 nickel grade 200 maraging steel with application to wind tunnel models. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Flint, R. Warren. Niche characterization of dominant estuarine benthic species. College Station, Tex : Sea Grant College Program, Texas A&M University, 1986.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Characterization of Nickel"

1

Li, Tao, Xuan Chen, Bo Zhang et Xin Hong. « Characterization of Laterite Nickel Ore ». Dans Characterization of Minerals, Metals, and Materials 2014, 541–48. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118888056.ch63.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Yan, Ganggang, Zibiao Wang, Dinghao Le, Xijun Zhang, Xintao Sun et Dalin Chen. « Separation of Nickel and Cobalt from Nickel and Cobalt Solution by Cyanex272 ». Dans Characterization of Minerals, Metals, and Materials 2022, 113–22. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92373-0_11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Sasse, H. E., et U. König. « Preparation and Characterization of Nickel Silicide ». Dans Springer Proceedings in Physics, 213–18. Berlin, Heidelberg : Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-93413-1_29.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Xu, Wenyong, Yufeng Liu, Hua Yuan, Zhou Li et Guoqing Zhang. « Surface Characterization of Nickel-Base Superalloy Powder ». Dans Springer Proceedings in Physics, 561–67. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-5944-6_55.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

da Rocha Caffarena, Valeska, Alberto Passos Guimarães, Magali Silveira Pinho, Elizandra Martins Silva, Jefferson Leixas Capitaneo et Marilia Sergio da Silva Beltrão. « Synthesis and Characterization of Electrodeposited Nickel Nanowires ». Dans Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, 195–201. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470456224.ch21.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Godínez-Azcuaga, Valery F., Miguel A. Marcial-Amaro, Jesús Porcayo-Calderón et Obdulia Mayorga-Martin. « Ultrasonic Characterization of Nickel-Chromium-Base Anticorrosive Coatings ». Dans Review of Progress in Quantitative Nondestructive Evaluation, 1285–89. Boston, MA : Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5339-7_166.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Janković, Dragana, Dušan Kićević et Mirjana Mitkov. « The Interface Characterization of Laminar Nickel-Alumina Composites ». Dans Advanced Science and Technology of Sintering, 575–80. Boston, MA : Springer US, 1999. http://dx.doi.org/10.1007/978-1-4419-8666-5_81.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Costa, Ana Cristina F. M., L. Gama, M. R. Morelli et Ruth H. G. A. Kiminami. « Nickel Ferrite : Combustion Synthesis, Characterization and Magnetic Properties ». Dans Advanced Powder Technology IV, 618–23. Stafa : Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-984-9.618.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Wei, Xue Yong, et Kyle Jiang. « Synthesis and Characterization of Nanoparticulate Strengthened Nickel Microcomponents ». Dans Advances in Science and Technology, 299–304. Stafa : Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908158-11-7.299.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Wu, Xiao Feng, Yun Fa Chen, Qun Yan Li et L. Q. Wei. « Preparation and Characterization of Integral Hollow Microspheres of Nickel Hydroxide and Nickel Oxide ». Dans Solid State Phenomena, 187–90. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-30-2.187.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Characterization of Nickel"

1

Rashidifar, Mahsa, Sara Darbari et Yaser Abdi. « Characterization of humidity sensor based on nickel-MoS2-nickel ». Dans 2020 28th Iranian Conference on Electrical Engineering (ICEE). IEEE, 2020. http://dx.doi.org/10.1109/icee50131.2020.9260786.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Shlepnev, Yuriy, et Scott McMorrow. « Nickel characterization for interconnect analysis ». Dans 2011 IEEE International Symposium on Electromagnetic Compatibility - EMC 2011. IEEE, 2011. http://dx.doi.org/10.1109/isemc.2011.6038368.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Shi, Qian, Shih-Chia Chang, Michael W. Putty et David B. Hicks. « Characterization of electroformed nickel microstructures ». Dans Micromachining and Microfabrication, sous la direction de Karen W. Markus. SPIE, 1995. http://dx.doi.org/10.1117/12.221293.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Ronsheim, Paul, Jeff McMurray, Philip Flaitz, Christopher Parks, Keith Thompson, David Larson, Thomas F. Kelly et al. « Analysis of Nickel Silicides by SIMS and LEAP ». Dans CHARACTERIZATION AND METROLOGY FOR NANOELECTRONICS : 2007 International Conference on Frontiers of Characterization and Metrology. AIP, 2007. http://dx.doi.org/10.1063/1.2799356.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Li, K., E. Eddie et S. P. Zhao. « TEM Characterization of Nickel Silicide Process ». Dans 2006 IEEE International Conference on Semiconductor Electronics. IEEE, 2006. http://dx.doi.org/10.1109/smelec.2006.380707.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Johnson, Za, Tim Kulin, Andy Pai et Calvin Goroski. « Characterization Testing of Aircraft Nickel Electrodes ». Dans Aerospace Power Systems Conference. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1999. http://dx.doi.org/10.4271/1999-01-1366.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Lynam, Niall R., et Hamid R. Habibi. « Characterization Of Nickel Oxide Electrochromic Films ». Dans 1988 International Congress on Optical Science and Engineering, sous la direction de Claes-Goeran Granqvist et Carl M. Lampert. SPIE, 1989. http://dx.doi.org/10.1117/12.949915.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Kurian, Manju, Divya S. Nair, P. Predeep, Mrinal Thakur et M. K. Ravi Varma. « Synthesis and Characterization of Nickel Zinc Ferrite ». Dans OPTICS : PHENOMENA, MATERIALS, DEVICES, AND CHARACTERIZATION : OPTICS 2011 : International Conference on Light. AIP, 2011. http://dx.doi.org/10.1063/1.3643621.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Kamdi, Z., A. R. Ainuddin, R. Hussin et S. A. Ibrahim. « Corrosion behavior of tungsten carbide-nickel weld-overlay ». Dans MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5089397.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Gonchond, J. P. « Combined XRR and RS Measurements of Nickel Silicide Films ». Dans CHARACTERIZATION AND METROLOGY FOR ULSI TECHNOLOGY 2005. AIP, 2005. http://dx.doi.org/10.1063/1.2062960.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Characterization of Nickel"

1

Miller, M. K., D. J. Larson et K. F. Russell. Characterization of segregation in nickel and titanium aluminides. Office of Scientific and Technical Information (OSTI), mars 1997. http://dx.doi.org/10.2172/459428.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Author, Not Given. REPORT FOR COMMERCIAL GRADE NICKEL CHARACTERIZATION AND BENCHMARKING. Office of Scientific and Technical Information (OSTI), décembre 2012. http://dx.doi.org/10.2172/1060187.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Wu, Ping, Robert Kershaw, Kirby Dwight et Aaron Wold. Growth and Characterization of Nickel-Doped ZnS Single Crystals. Fort Belvoir, VA : Defense Technical Information Center, septembre 1988. http://dx.doi.org/10.21236/ada199781.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Widjaja, Agus. Synthesis and characterization of nickel hydroxide powders for battery application. Office of Scientific and Technical Information (OSTI), octobre 1997. http://dx.doi.org/10.2172/348926.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Ralston, C. Y., M. Kumar et S. W. Ragsdale. Characterization of heterogeneous nickel sites in CO dehydrogenase from Clostridium thermoaceticum by nickel L-edge x-ray spectroscopy. Office of Scientific and Technical Information (OSTI), avril 1997. http://dx.doi.org/10.2172/603654.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Chacon, L. C. The synthesis, characterization and reactivity of high oxidation state nickel fluorides. Office of Scientific and Technical Information (OSTI), décembre 1997. http://dx.doi.org/10.2172/335167.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Stickle, W. F., J. R. Reynolds et C. A. Jolly. Surface Characterization of Electrically Conducting Nickel Tetrathiooxalate/Poly(vinyl alcohol) Composites. Fort Belvoir, VA : Defense Technical Information Center, avril 1991. http://dx.doi.org/10.21236/ada234598.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

D.S. Morton, S.A. Attanasio et G.A. Young. Primary Water SCC Understanding and Characterization Through Fundamental Testing in the Vicinity of the Nickel/Nickel Oxide Phase Transition. Office of Scientific and Technical Information (OSTI), mai 2001. http://dx.doi.org/10.2172/821310.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Smith, Michael Edward. Synthesis, characterization, and reactivity of pentamethylcyclopentadienyl complexes of divalent cobalt and nickel. Office of Scientific and Technical Information (OSTI), octobre 1993. http://dx.doi.org/10.2172/10108086.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Eastman, J. A., M. A. Beno, G. S. Knapp et L. J. Thompson. X-ray diffraction characterization of defect behavior in nanocrystalline nickel during annealing. Office of Scientific and Technical Information (OSTI), septembre 1994. http://dx.doi.org/10.2172/10194718.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Characterization of Nickel » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie