Littérature scientifique sur le sujet « Catalyst warm-up »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Catalyst warm-up ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Catalyst warm-up"
Umehara, K. « HC reduction system for cold start and warm-up phases — Improvement of catalyst warm-up by retarded ignition ». JSAE Review 18, no 1 (janvier 1997) : 67–68. http://dx.doi.org/10.1016/s0389-4304(96)00056-2.
Texte intégralKhalilikhah, O., et M. Shalchian. « Modelling and Fuzzy-Threshold Control of SI Engine for Emission Reduction during Cold Start Phase ». International Journal of Automotive and Mechanical Engineering 16, no 4 (30 décembre 2019) : 7225–42. http://dx.doi.org/10.15282/ijame.16.4.2019.05.0539.
Texte intégralBenjamin, S. F., et C. A. Roberts. « Automotive catalyst warm-up to light-off by pulsating engine exhaust ». International Journal of Engine Research 5, no 2 (avril 2004) : 125–47. http://dx.doi.org/10.1243/146808704773564541.
Texte intégralBenjamin, S. F., et C. A. Roberts. « Warm up of automotive catalyst substrates : Comparison of measurements with predictions ». International Communications in Heat and Mass Transfer 25, no 1 (janvier 1998) : 19–32. http://dx.doi.org/10.1016/s0735-1933(97)00134-6.
Texte intégralJeong, S.-J., et W.-S. Kim. « A new strategy for improving the warm-up performance of a light-off auto-catalyst for reducing cold-start emissions ». Proceedings of the Institution of Mechanical Engineers, Part D : Journal of Automobile Engineering 215, no 11 (1 novembre 2001) : 1179–96. http://dx.doi.org/10.1243/0954407011528725.
Texte intégralBenjamin, S. F., et C. A. Roberts. « Catalyst warm-up to light-off by pulsating engine exhaust : Two-dimensional studies ». International Journal of Engine Research 5, no 3 (juin 2004) : 257–80. http://dx.doi.org/10.1243/1468087041549607.
Texte intégralBenjamin, S. F., et C. A. Roberts. « Modelling warm-up of an automotive catalyst substrate using the equivalent continuum approach ». International Journal of Vehicle Design 22, no 3/4 (1999) : 253. http://dx.doi.org/10.1504/ijvd.1999.001868.
Texte intégralJungKim, Chan, Sank Wook-Han, Ki Hyun Kim, Moo Yeon Lee et Gee Soo Lee. « Effects of the exhaust gas heat recovery system with a plate heat exchanger on the warm-up performance characteristics of the gasoline engine ». International Journal of Engineering & ; Technology 7, no 2.12 (3 avril 2018) : 136. http://dx.doi.org/10.14419/ijet.v7i2.12.11110.
Texte intégralBenjamin, S. F., et C. A. Roberts. « Warm up of an automotive catalyst substrate by pulsating flow : a single channel modelling approach ». International Journal of Heat and Fluid Flow 21, no 6 (décembre 2000) : 717–26. http://dx.doi.org/10.1016/s0142-727x(00)00025-4.
Texte intégralMerkisz, Jerzy, Jacek Pielecha et Monika Andrych-Zalewska. « Influence of the Length of a Catalyst-Coated Glow Plug on Exhaust Emissions ». Energies 13, no 24 (11 décembre 2020) : 6557. http://dx.doi.org/10.3390/en13246557.
Texte intégralThèses sur le sujet "Catalyst warm-up"
Hambarek, Djamel Eddine. « Développement d'une méthodologie d'essais dynamiques appliquée à la mise au point moteur ». Electronic Thesis or Diss., Ecole centrale de Nantes, 2023. http://www.theses.fr/2023ECDN0035.
Texte intégralThe work of this thesis responds to the context of the evolution of engine depollution norms together with the increase of the clientrequirements. It proposes a complete methodology of engine calibration considering dynamic effects with the aim of an efficient control in terms of emissions and performances. The method is divided into four steps: the dynamic design of experiments generating a set of RDE (Real Driving Emissions) cycles and dynamic variations of engine parameters using low discrepancy sequences: test results are used to train a dynamical model using LSTM neural network to predict output dynamic variations(CO, HC, NOx, Exhaust flow and temperature). The trained model is used in an optimization loop to calibrate the engine parameters using a genetic algorithm. The catalyst warm-up phase is the chosen phase for the development of the method. It is the phase occuring from engine start until the catalyst is the most efficient. It is indeed the phase with the most important emissions which is coherent with the aim of the engine calibration. The results showed noticeable improvements of CO, HC and Nox reduction compared to the steady state (baseline) method
Cedeño, Alejandro. « Sintering of a Pt/Al₂O₃ automotive exhaust oxidation catalyst effect on converter "warm-up" performance / ». 1989. http://catalog.hathitrust.org/api/volumes/oclc/20051839.html.
Texte intégralTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 183-192).
Actes de conférences sur le sujet "Catalyst warm-up"
Ball, Douglas J. « Distribution of Warm-Up and Underfloor Catalyst Volumes ». Dans International Fuels & Lubricants Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1992. http://dx.doi.org/10.4271/922338.
Texte intégralLepreux, Olivier, Yann Creff et Nicolas Petit. « Warm-up strategy for a Diesel Oxidation Catalyst ». Dans 2009 European Control Conference (ECC). IEEE, 2009. http://dx.doi.org/10.23919/ecc.2009.7074995.
Texte intégralCedrone, Kevin, et Wai K. Cheng. « Using Valve Timing and Exhaust Back Pressure to Improve Catalyst Warm-Up Time ». Dans SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2013. http://dx.doi.org/10.4271/2013-01-2656.
Texte intégralBall, Douglas J. « A Warm-Up - Underfloor Converter Parametric Study : Effects of Catalyst Technology on Emission Performance ». Dans 1996 SAE International Fall Fuels and Lubricants Meeting and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1996. http://dx.doi.org/10.4271/961905.
Texte intégralSalehi, Rasoul, et Anna G. Stefanopoulou. « Optimal Exhaust Valve Opening Control for Fast Aftertreatment Warm Up in Diesel Engines ». Dans ASME 2018 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/dscc2018-9178.
Texte intégralJeong, Soo-Jin, et Woo-Seung Kim. « Three-Dimensional Numerical Study on the Use of Warm-up Catalyst to Improve Light-Off Performance ». Dans SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0207.
Texte intégralKarkanis, Anastasios N., Pantelis N. Botsaris et Panagiotis D. Sparis. « A Catalyst Surface Control Automation System for Emission Reduction During Cold Start ». Dans ASME 2004 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/icef2004-0865.
Texte intégralRavikumar, Avinash, Ankur Bhatt, Brian Gainey et Benjamin Lawler. « GT-Suite Modeling of Thermal Barrier Coatings in a Multi-Cylinder Turbocharged DISI Engine for Catalyst Light-Off Delay Improvement ». Dans Energy & Propulsion Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-01-1602.
Texte intégralSanketi, Pannag R., J. Karl Hedrick et Tomoyuki Kaga. « A Simplified Catalytic Converter Model for Automotive Coldstart Control Applications ». Dans ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80696.
Texte intégralHAMBAREK, Djamel Eddine, Jean-François PETIOT, Pascal Chesse et Eric WATEL. « Towards a Complete Engine Calibration Methodology : Dynamic Design of Experiments (DDoE), Application to Catalyst Warm-Up Phase ». Dans 15th International Conference on Engines & Vehicles. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2021. http://dx.doi.org/10.4271/2021-24-0028.
Texte intégral