Littérature scientifique sur le sujet « CASCADE CYCLE »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « CASCADE CYCLE ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "CASCADE CYCLE"
Woodward, John B. « The Rankine Topping Cycle Revisited ». Journal of Ship Research 36, no 01 (1 mars 1992) : 91–98. http://dx.doi.org/10.5957/jsr.1992.36.1.91.
Texte intégralLee, Ho Saeng, S. T. Oh, Jung In Yoon, S. G. Lee et K. H. Choi. « Analysis of Cryogenic Refrigeration Cycle Using Two Stage Intercooler ». Defect and Diffusion Forum 297-301 (avril 2010) : 1146–51. http://dx.doi.org/10.4028/www.scientific.net/ddf.297-301.1146.
Texte intégralFu, Lan Fang, He Xu Sun et Yan Cai Zhu. « Sample Time Staggered One-Cycle Control Based on Three-Phase H-Bridge Cascade VSI ». Advanced Materials Research 516-517 (mai 2012) : 1822–26. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.1822.
Texte intégralYao, Shouguang, Likang Xu et Liang Tang. « New cold-level utilization scheme for cascade three-level rankine cycle using the cold energy of liquefied natural gas ». Thermal Science 23, no 6 Part B (2019) : 3865–75. http://dx.doi.org/10.2298/tsci171012239y.
Texte intégralXu, Likang, et Guihua Lin. « Simulation and optimization of liquefied natural gas cold energy power generation system on floating storage and regasification unit ». Thermal Science, no 00 (2020) : 205. http://dx.doi.org/10.2298/tsci200404205x.
Texte intégralSun, Heng, Hong Mei Zhu et Hong Wei Liu. « Process Simulations of the Cold Recovery Unit in a LNG CCHP System with Different Power Cycles ». Applied Mechanics and Materials 90-93 (septembre 2011) : 3026–32. http://dx.doi.org/10.4028/www.scientific.net/amm.90-93.3026.
Texte intégralRehberger, Max, et Michael Hiete. « Allocation Procedures for Generic Cascade Use Cases - An Evaluation Using Monte Carlo Analysis ». Materials Science Forum 959 (juin 2019) : 32–45. http://dx.doi.org/10.4028/www.scientific.net/msf.959.32.
Texte intégralROH, CHUL WOO, JIN WOO YOO et MIN SOO KIM. « VAPOR REFRIGERANT INJECTION TECHNIQUES FOR HEAT PUMP SYSTEMS : THE LATEST LITERATURE REVIEW AND DISCUSSION ». International Journal of Air-Conditioning and Refrigeration 22, no 01 (mars 2014) : 1430002. http://dx.doi.org/10.1142/s201013251430002x.
Texte intégralBoahen et Choi. « A Study on the Performance of a Cascade Heat Pump for Generating Hot Water ». Energies 12, no 22 (12 novembre 2019) : 4313. http://dx.doi.org/10.3390/en12224313.
Texte intégralWu, Chih. « Power performance of a cascade endoreversible cycle ». Energy Conversion and Management 30, no 3 (janvier 1990) : 261–66. http://dx.doi.org/10.1016/0196-8904(90)90008-m.
Texte intégralThèses sur le sujet "CASCADE CYCLE"
Desmons, Sarah. « Cycle de Calvin alternatif : catalyse chémo-enzymatique pour la transformation du dioxyde de carbone en carbohydrates et dérivés ». Thesis, Toulouse 3, 2020. http://www.theses.fr/2020TOU30200.
Texte intégralThe manuscript presents the conversion of carbon dioxide into C3 and C4 carbohydrates using stereocontrolled chemo-enzymatic cascade reactions. The process relies on a two-step strategy with (i) the catalytic and selective 4-electron reduction of CO2 into a bis(boryl)acetal derivative followed by (ii) the stereocontrolled bio-catalyzed C-C coupling of the bis(boryl)acetal derivative into carbohydrates. The strategy developed is unprecedented and represents a new exciting approach for the use of CO2 as a Cn source for the synthesis of valuable industrially relevant enantiomerically pure biomolecules. The first chapter is a bibliographic study describing (i) an introduction to carbohydrate chemistry with a special focus dedicated to the production of carbohydrates from CO2 and formaldehyde as C1 sources and (ii) the selective and catalytic four-electron reduction of CO2 using hydroborane and hydrosilane as reductants for the formation of bis(boryl)acetal and bis(silyl)acetal derivatives and their use as formaldehyde sources or formaldehyde surrogates for the synthesis of value-added product. The second chapter presents the synthesis and reactivity of bis(boryl)acetal and bis(silyl)acetal derivatives. Notably, a new isolable bis(boryl)acetal derivative was successfully synthesized and isolated on a gram scale. The third chapter describes the stereocontrolled bioconversion of the bis(boryl)acetal derivative synthetized from CO2 into carbohydrates. Notably, an enzymatic cascade reaction was performed for the production of an enantiomerically pure C4 carbohydrate using CO2 as the only carbon source
Bauer, Tom. « Concevoir un produit pour plusieurs vies : Propositions pour la conception et l'évaluation environnementales de solutions en cascade ». Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAI076/document.
Texte intégralThis PhD dissertation focuses on an innovative end-of-life strategy: repurposing. We define ‘repurposing’ as a manufacturing process through which products nearing their end-of-life are reused in different applications. At the end of their intended use, products are reintegrated into the manufacturing chain and adapted for their next application. We also refer to this strategy as cascading application reuse (CAR). The main purpose of CAR is the preservation of the added-value of such products. This strategy is in line with other reuse strategies such as direct reuse and remanufacturing.The central illustration in our case study addresses lithium-ion batteries used in electric vehicles, which are recycled when the battery’s charging capacity falls below 80%. Extending the component lifespan with a second application, e.g. stationary application, postpones introduction into the waste stream, retaining the added-value from the original manufacturing process. Despite these advantages, examples of product adaptation for CAR remain at a proof-of-concept scale - currently these products and their value chains are not yet designed with strategies supporting reuse.The objective of this research is to provide a clear vision to design teams about repurposing strategies, how to integrate the strategies during the upstream stages of the design process and how to facilitate the corresponding lifecycle assessment. The objective is to support designers during the manufacturing of repurposed products. We make three proposals.The first consists of classifying the characteristics specific to the repurposing strategy according to three axes: the product, the (re)manufacturing process and the business model. Through this framework, we describe the dimensions and characteristics of what the repurposed product offers, which are integral during the design activity. These attributes are the result of a study of the relevant literature coupled with several field investigations.Our second proposal concerns the design process for such products. Indeed, several differences with classical design practices appear: the need for product recovery at the end of use, subsequent applications and needs not fully defined, which affect performance, etc. A design stage for repurposed products must therefore be integrated before subsequent applications in order to optimise redesign solutions. Integrated as early as possible, they aim to facilitate product reuse by taking into account stakeholders, life cycle phases, time aspects and better information management.Finally, a generic framework structuring the carrying out of life cycle analyses of repurposing is proposed. This will simplify the inclusion of their specificities for life cycle assessments (LCA) practitioners. Indeed, the complexity of LCA modelling for cascading applications products requires more rigour and precision than single application products. To support this framework, three recommendations for design teams are made, the objective of which is to better formalise the information from the design process. These recommendations support the formalisation of contextual elements to improve comparison with other studies and the organisation of information for sensitivity analyses.These three proposals are implemented on two battery case studies, during working sessions involving stakeholders representing the complete life cycle: sponsor, design teams, logisticians, recycler, etc
Bessard, Anne. « Mécanismes moléculaires de la cascade de signalisation des MAPKinases contrôlant la motilité et la prolifération des cellules hépatiques normales et transformées ». Rennes 1, 2006. http://www.theses.fr/2006REN1S035.
Texte intégralJoussot, Jessie. « Stratégies de synthèse d’un nouvel antipsychotique potentiel : cascades réactionnelles palladocatalysées : un outil puissant pour la synthèse de structures polycycliques complexes et hautement fonctionnalisées ». Thesis, Strasbourg, 2015. http://www.theses.fr/2015STRAF016/document.
Texte intégralThis PhD thesis allowed us in the first part to develop different synthesic pathways to a new potential antipsychotic (F17464) invented by Pierre Fabre laboratories. Three strategies based on convergent syntheses are initiated. The key step of the first strategy is olefin cross metathesis. The second strategy rests on Sonogashira coupling and the third one involves a new methodology ofchromones alkylation in position 3. These methods allowed us access to novel synthetic intermediates, useful in the preparation of the F17464 molecule by following industrial confines.ln the second part, different types of polycyclic molecules were synthesized by palladium-catalyzed cascade reactions. A set of fused naphthalenes was prepared by palladium-catalyzed dominoreaction including cyclocarbopalladations followed by C(sp2)-H bond activation. Several types of fused seven-membered carbocycles were synthesized in a one-pot reaction from convenient substrates, via cascade reactions including cyclocarbopalladations followed by C(sp2 or sp3)-Hbond activation. Finally, cyclooctatrienes and fenestradienes were obtained also in a one-pot reaction from the same substrate via cascade reactions involving 4-exo-dig cyclocarbopalladation, followed by Stille coupling, alkyne addition onto a triple bond, finishing by electrocyclization reactions. Temperature is the only parameter that differs in the synthesis ôf the two complex polycycles starting from the same substrate
Younes, Mourad. « Capture du CO2 par anti-sublimation : conception, simulation et réalisation d'un prototype ». Paris, ENMP, 2003. http://www.theses.fr/2003ENMP1192.
Texte intégralMissions of CO2 are increasing, leading to temperature increase of Earth. This led to the Kyoto Protocol which aims at the elaboration of policies of limitation of the emissions of greenhouse gases among which CO2. A large number of options exist to limit CO2 emissions associated with energy production, one of them is developed in this dissertation, the CO2 capture from flue gases. Usual techniques of CO2 capture are briefly analyzed. The major part of this work concerns the development of a new CO2 capture based on the CO2 frosting at low temperature. The CO2 frosting is performed by a refrigerating system composed of an integrated cascade, which offers evaporating temperatures lower than the CO2 frosting temperature. Several architectures are analyzed in order to choose the most energy efficient one. A prototype mock-up has been designed and realized for the validation of the global concepts of the CO2 frosting and defrosting. The components have been sized using computerized tools developed for the modeling of multi-stage integrated cascades. The system includes two low-temperature evaporators operating alternatively in frosting and defrosting modes to permit continuous system operation. The "cold" energy from defrosting is recovered by the refrigerant blend, which permits to improve the energy efficiency of the system
Douss, Néjib. « Etude experimentale de cycles a cascades a adsorption solide ». Paris 7, 1988. http://www.theses.fr/1988PA077052.
Texte intégralDouss, Néjib. « Etude expérimentale de cycles à cascades à adsorption solide ». Grenoble 2 : ANRT, 1988. http://catalogue.bnf.fr/ark:/12148/cb37613349g.
Texte intégralKhůlová, Jitka. « Topné výměníky, vliv zapojení na účinnost cyklu ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400503.
Texte intégralGoloubev, Dmitri. « Kühlung eines resistiven HTSL-Kurzschlussstrombegrenzers mit einer Gemisch-Joule-Thomson-Kältemaschine ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2004. http://nbn-resolving.de/urn:nbn:de:swb:14-1095838519812-78347.
Texte intégralBrown, Ashlie M. « Improved thermal energy utilization through coupled and cascaded cooling cycles ». Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31645.
Texte intégralCommittee Chair: Dr. Srinivas Garimella; Committee Member: Dr. Samuel Graham; Committee Member: Dr. Sheldon Jeter. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Livres sur le sujet "CASCADE CYCLE"
Pehlken, Alexandra, Matthias Kalverkamp et Rikka Wittstock. Cascade Use in Technologies 2018 : Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft – Oldenburg 2018. Springer Vieweg, 2018.
Trouver le texte intégralJacobsen, Dean, et Olivier Dangles. Energy flow and species interactions at the edge. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198736868.003.0007.
Texte intégralChapitres de livres sur le sujet "CASCADE CYCLE"
Kalverkamp, Matthias, et Neele Karbe. « Comparability of Life Cycle Assessments : Modelling and Analyzing LCA Using Different Databases ». Dans Cascade Use in Technologies 2018, 51–63. Berlin, Heidelberg : Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57886-5_8.
Texte intégralChabre, Marc, Bruno Antonny et T. Minh Vuong. « The Transducin Cycle in the Phototransduction Cascade ». Dans Biological Signal Transduction, 207–20. Berlin, Heidelberg : Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-75136-3_15.
Texte intégralWulf, Kalle, Frauke Germer et Henning Albers. « Comparison of Cascaded Utilization with Life Cycle Assessment – a Case Study of Wind Turbine Blades ». Dans Cascade Use in Technologies 2018, 133–41. Berlin, Heidelberg : Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57886-5_16.
Texte intégralJonna, Gnaneswara Rao, Vamana Murthi Thuniki et Madhu Mutyam. « CASCADE : Congestion Aware Switchable Cycle Adaptive Deflection Router ». Dans Architecture of Computing Systems – ARCS 2016, 35–47. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30695-7_3.
Texte intégralBauer, Richard, J. David Christopher, Volker Glaab, Svetlana A. Lyapustina, Jolyon P. Mitchell et Terrence P. Tougas. « Product Life Cycle Approach to Cascade Impaction Measurements ». Dans Good Cascade Impactor Practices, AIM and EDA for Orally Inhaled Products, 135–49. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-6296-5_6.
Texte intégralGotoh, Yukiko, et Eisuke Nishida. « The MAP kinase cascade : Its role in Xenopus oocytes, eggs and embryos ». Dans Progress in Cell Cycle Research, 287–97. Boston, MA : Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1809-9_23.
Texte intégralDao, Thi-Kien, Trong-The Nguyen, The-Vinh Do, Trinh-Dong Nguyen et Vinh-Tiep Nguyen. « An Optimal Cascade Reservoir Operation Based on Multi-objective Water Cycle Algorithm ». Dans Advances in Engineering Research and Application, 188–200. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22200-9_20.
Texte intégralKumar, Sachin, et Virender Chahal. « A Review of Various Kinds of Cascade Refrigeration Cycle and Application of Ejector Mechanism ». Dans Advances in Materials and Mechanical Engineering, 245–65. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0673-1_20.
Texte intégralCao, Y., M. Q. Gong, Y. F. Qi, E. C. Luo, J. F. Wu et G. M. Chen. « Thermodynamic Prediction of the Vortex Tube Applied to a Mixed-Refrigerant Auto-Cascade J-T Cycle ». Dans Cryocoolers 12, 621–26. Boston, MA : Springer US, 2003. http://dx.doi.org/10.1007/0-306-47919-2_82.
Texte intégralFord, Heide L., Robert A. Sclafani et James Degregori. « Cell Cycle Regulatory Cascades ». Dans Cell Cycle and Growth Control, 93–128. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2004. http://dx.doi.org/10.1002/0471656437.ch3.
Texte intégralActes de conférences sur le sujet "CASCADE CYCLE"
Beck, M., D. Hofstetter, T. Aellen, J. Faist, U. Oesterle, E. Gini et H. Melchior. « Quantum cascade laser operation with high duty cycle ». Dans CLEO 2001. Technical Digest. Summaries of papers presented at the Conference on Lasers and Electro-Optics. Postconference Technical Digest. IEEE, 2001. http://dx.doi.org/10.1109/cleo.2001.947868.
Texte intégralKilicarslan, Ali, et Norbert Mu¨ller. « Irreversibility Analysis of a Vapor Compression Cascade Refrigeration Cycle ». Dans ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66363.
Texte intégralXie, Yingbai, Kuikui Cui, Luxiang Zong et Zhichao Wang. « The Entropy Analysis on NH3/CO2 Cascade Refrigeration Cycle ». Dans ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-40121.
Texte intégralAraújo, Hugo. « Exergy analysis of a natural gas liquefaction cascade cycle ». Dans 16th Brazilian Congress of Thermal Sciences and Engineering. ABCM, 2016. http://dx.doi.org/10.26678/abcm.encit2016.cit2016-0646.
Texte intégralFasching, G., A. Benz, J. Kroll, J. Darmo, Ch Deutsch, A. M. Andrews, W. Schrenk, G. Strasser et K. Unterrainer. « From few-cycle THz pulses to terahertz quantum-cascade lasers ». Dans 2007 19th International Conference on Applied Electromagnetics and Communications (ICECom). IEEE, 2007. http://dx.doi.org/10.1109/icecom.2007.4544436.
Texte intégralGeorgiou, Demos P. « The Travelling Cascade, Constant Volume Heat Exchanger in a Gas Turbine Lead Combined Cycle ». Dans ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-536.
Texte intégralSchroder, Andy, Mark G. Turner et Rory A. Roberts. « Combined Cycle Engine Cascades Achieving High Efficiency ». Dans ASME Turbo Expo 2016 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-58004.
Texte intégralOuyang, Shaodi, Jinjun Liu, Xinyu Wang et Fei Meng. « One-cycle control of a delta-connected cascade H bridge rectifier ». Dans 2014 IEEE International Power Electronics and Application Conference and Exposition (PEAC). IEEE, 2014. http://dx.doi.org/10.1109/peac.2014.7037973.
Texte intégralRiepl, J., J. Raab, P. Abajyan, H. Nong, J. R. Freeman, L. H. Li, E. H. Linfield et al. « Sub-cycle high-order nonlinearities in a terahertz quantum cascade laser ». Dans 2022 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). IEEE, 2022. http://dx.doi.org/10.1109/irmmw-thz50927.2022.9895597.
Texte intégralPurushothaman, Kirubakaran, Sankar Kumar Jeyaraman, Sasikanta Parida et Kishore Prasad Deshkulkarni. « Aeroelastic Flutter Analysis of Linear Cascade Blades : STC5 ». Dans ASME 2017 Gas Turbine India Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gtindia2017-4773.
Texte intégralRapports d'organisations sur le sujet "CASCADE CYCLE"
Delwiche, Michael, Boaz Zion, Robert BonDurant, Judith Rishpon, Ephraim Maltz et Miriam Rosenberg. Biosensors for On-Line Measurement of Reproductive Hormones and Milk Proteins to Improve Dairy Herd Management. United States Department of Agriculture, février 2001. http://dx.doi.org/10.32747/2001.7573998.bard.
Texte intégral