Littérature scientifique sur le sujet « CAO modèl »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « CAO modèl ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "CAO modèl"
Babu, Numbury Surendra, et Didugu Jayaprakash. « Computational Study of the Stability of Tautomers and equilibrium constants of Cyanuric acid (CA) in Different solvents. » JOURNAL OF ADVANCES IN CHEMISTRY 11, no 2 (22 janvier 2015) : 3485–97. http://dx.doi.org/10.24297/jac.v11i2.6691.
Texte intégralShcherbak, N. S., G. Yu Yukina, A. G. Gurbo, E. G. Sukhorukova, A. G. Sargsian, V. V. Thomson et M. M. Galagudza. « Morphofunctional state of microglia and hippocampal neurons in aged rats after anesthesia with chloral hydrate ». Regional blood circulation and microcirculation 21, no 3 (12 octobre 2022) : 64–71. http://dx.doi.org/10.24884/1682-6655-2022-21-3-64-71.
Texte intégralOrchard, C. H., et E. G. Lakatta. « Intracellular calcium transients and developed tension in rat heart muscle. A mechanism for the negative interval-strength relationship. » Journal of General Physiology 86, no 5 (1 novembre 1985) : 637–51. http://dx.doi.org/10.1085/jgp.86.5.637.
Texte intégralDEURA, Tomoyuki, Makoto TANABE et Hiroyuki OKUDA. « 350 Dynamic and Acoustic Analyses to the impact load using a modal method ». Proceedings of The Computational Mechanics Conference 2006.19 (2006) : 451–52. http://dx.doi.org/10.1299/jsmecmd.2006.19.451.
Texte intégralGONG, Zheng, Luis Diago et Ichiro Hagiwara. « 2308 Improved Model based Image Retexturing ». Proceedings of The Computational Mechanics Conference 2010.23 (2010) : 250–51. http://dx.doi.org/10.1299/jsmecmd.2010.23.250.
Texte intégralMigliore, M., E. P. Cook, D. B. Jaffe, D. A. Turner et D. Johnston. « Computer simulations of morphologically reconstructed CA3 hippocampal neurons ». Journal of Neurophysiology 73, no 3 (1 mars 1995) : 1157–68. http://dx.doi.org/10.1152/jn.1995.73.3.1157.
Texte intégralOstrova, I. V., O. A. Grebenchikov et N. V. Golubeva. « Neuroprotective Effect of Lithium Chloride in Rat Model of Cardiac Arrest ». General Reanimatology 15, no 3 (7 juillet 2019) : 73–82. http://dx.doi.org/10.15360/1813-9779-2019-3-73-82.
Texte intégralBickler, Philip E., Xinhua Zhan et Christian S. Fahlman. « Isoflurane Preconditions Hippocampal Neurons against Oxygen–Glucose Deprivation ». Anesthesiology 103, no 3 (1 septembre 2005) : 532–39. http://dx.doi.org/10.1097/00000542-200509000-00016.
Texte intégralPicone, Carmela M., James C. Grotta, Rosa Earls, Roger Strong et John Dedman. « Immunohistochemical Determination of Calcium—Calmodulin Binding Predicts Neuronal Damage after Global Ischemia ». Journal of Cerebral Blood Flow & ; Metabolism 9, no 6 (décembre 1989) : 805–11. http://dx.doi.org/10.1038/jcbfm.1989.114.
Texte intégralCapogrossi, M. C., M. D. Stern, H. A. Spurgeon et E. G. Lakatta. « Spontaneous Ca2+ release from the sarcoplasmic reticulum limits Ca2+-dependent twitch potentiation in individual cardiac myocytes. A mechanism for maximum inotropy in the myocardium. » Journal of General Physiology 91, no 1 (1 janvier 1988) : 133–55. http://dx.doi.org/10.1085/jgp.91.1.133.
Texte intégralThèses sur le sujet "CAO modèl"
Arige, Abhaya Dhathri. « Simplification of 3D CAD models with deep learning for augmented reality ». Electronic Thesis or Diss., Institut polytechnique de Paris, 2023. http://www.theses.fr/2023IPPAS018.
Texte intégralAs a part of Industry 4.0 the use of Augmented Reality (AR) devices like HoloLens has gained significant acceptance for training assembly line operators in various industries. When employing Computer-Aided Design (CAD) models to create assembly line instructions for training purposes, preserving all redundant information becomes unnecessary. Utilizing simplified CAD models leads to improved run-time performance of the applications in which they are employed. This specific research project is tasked with developing methods and techniques to streamline complex 3D CAD models, making them suitable for AR applications.In this research, we explain how 3D models play a significant role in augmented reality (AR) by enriching the virtual experience through the superimposition of computer-aided design (CAD models) onto the real world. The study goes on to offer detailed descriptions of numerous applications of AR in operator training. Furthermore, it elucidates how the integration of 3D CAD models contributes to a deeper understanding of instructions and procedures within these training scenarios.We conducted an in-depth literature review in the field of CAD model simplification to determine which simplification techniques are most suitable for integration into augmented reality (AR) scenarios. Our research revealed that mesh-based simplification techniques are particularly effective in preserving the essential features of CAD models while offering the advantages of precise control over the level of detail.Additionally, we have carried out four distinct types of assessments as part of our research. These assessments encompassed objective evaluations that applied mesh-based techniques from existing literature, subjective assessment involving a thorough examination of each simplified model to determine the level of simplification based on vertex ranges, real-world testing conducted with the assistance of the HoloLens2 that demonstrated framerate enhancements when employing simplified CAD models in place of their original versions. To conclude our evaluations, we conducted user assessments, as user experience holds utmost importance in our study. They demonstrated that the simplified models possess a high degree of capability in substituting the original counterparts. However, it was noted that more simplification is required, particularly for intricate CAD models.An innovative approach centered around segmentation and adaptive simplification through the utilization of deep learning methods is proposed as the main methodology. To illustrate this framework, we employed a specific feature called "continuous chains". We subsequently conducted a comparative analysis against established state-of-the-art techniques, demonstrating that our methodology outperforms existing approaches. In our future research, we intend to expand the scope of our framework to encompass multiple features in CAD model
Boussuge, Flavien. « Idéalisation d'assemblages CAO pour l'analyse EF de structures ». Phd thesis, Université de Grenoble, 2014. http://tel.archives-ouvertes.fr/tel-01071560.
Texte intégralSoderquist, Hans Lars. « Automatic geometric data migration throughout views of a model fidelity family / ». Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1184.pdf.
Texte intégralZhu, Cheng-Feng. « CAD/CSPP/CAM integration using feature-based component data model ». Thesis, University of Nottingham, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362993.
Texte intégralCarlson, Shane A. « Development of a Variational Part Model Using In-Process Dimensional Measurement Error ». Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1341.pdf.
Texte intégralFernando, L. Greshan. « Development of an analytical model for electrochemical machining (ECM) of an axisymmetric disk ». Ohio : Ohio University, 1999. http://www.ohiolink.edu/etd/view.cgi?ohiou1175884893.
Texte intégralPepin, Faustin. « Obrobitelnost kompresních kol z titanových slitin ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230048.
Texte intégralElmubarak, Mona Dr. « Accuracy and reliability of traditional measurement techniques for tooth widths and arch perimeter compared to CAD/CAM ». The University of the Western Cpae, 2018. http://hdl.handle.net/11394/6472.
Texte intégralBACKGROUND: Plaster models form an integral part of the traditional orthodontic records. They are necessary for diagnosis and treatment planning, case presentations as well as for the evaluation of treatment progress. The accuracy of the measurements taken for space assessment is crucial prior to treatment planning. The introduction of digital models overcomes some problems experienced with plaster models. Digital models have shown to be an acceptable alternative for plaster models. AIM: The aim of the study was to determine the accuracy of traditional measurement techniques when compared to the CAD/ CAM measurements in the assessment of tooth widths and arch perimeter from plaster models. METHOD: The mesio-distal tooth widths and arch perimeter of thirty archived plaster models were measured using a digital caliper to the nearest 0.01 mm and divider to the nearest 0.1 mm. Corresponding digital models were produced by scanning them with a CAD/CAM (InEos X5) and space analysis completed by measurements using InEos Blue software. Measurements were repeated after 1 week from the initial measurement. The methods were compared using descriptive analysis (mean difference and standard deviation). RESULTS: The operator reliability was high for digital models as well as the plaster models when the measurement tool was the digital caliper (analyzed using the Pearson correlation coefficient in the paired t-test). The mean values of tooth widths measurements of CAD/CAM, digital caliper and divider were 6.82 (±0.04), 6.94 (± 0.04) and 7.11 (± 0.04). There was a significant difference between the measurements made by the CAD/CAM and the divider. Additionally significant differences between the measurements by digital caliper and divider measurements (p < 0.05) were observed. No significant difference was found when comparing CAD/CAM to digital caliper. Positive correlation was displayed between CAD/CAM, digital caliper and the divider, but the measurements completed with the digital caliper had the highest correlation with the CAD/CAM. The difference was not significant between the aforementioned measurement tools (p > 0.05). Arch perimeter measurements showed no statistical significant difference between CAD/CAM, digital caliper and divider (p < 0.05). CONCLUSION: Archived plaster models stored as records can be converted to digital models as it will have the same accuracy of measurements. The value of doing a space analysis with the CAD/CAM system can be performed with similar reliability on the digital models as a caliper on plaster models.
Tamburini, Diego Romano. « The analyzable product model representation to support design-analysis integration ». Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17106.
Texte intégralElmubarak, Mona. « Accuracy and reliability of traditional measurement techniques for tooth widths and arch perimeter compared to CAD/CAM ». University of the Western Cape, 2018. http://hdl.handle.net/11394/6521.
Texte intégralBackground: Plaster models form an integral part of the traditional orthodontic records. They are necessary for diagnosis and treatment planning, case presentations as well as for the evaluation of treatment progress. The accuracy of the measurements taken for space assessment is crucial prior to treatment planning. The introduction of digital models overcomes some problems experienced with plaster models. Digital models have shown to be an acceptable alternative for plaster models. Aim: The aim of the study was to determine the accuracy of traditional measurement techniques when compared to the CAD/ CAM measurements in the assessment of tooth widths and arch perimeter from plaster models. Method: The mesio-distal tooth widths and arch perimeter of thirty archived plaster models were measured using a digital caliper to the nearest 0.01 mm and divider to the nearest 0.1 mm. Corresponding digital models were produced by scanning them with a CAD/CAM (InEos X5) and space analysis completed by measurements using InEos Blue software. Measurements were repeated after 1 week from the initial measurement. The methods were compared using descriptive analysis (mean difference and standard deviation). Results: The operator reliability was high for digital models as well as the plaster models when the measurement tool was the digital caliper (analyzed using the Pearson correlation coefficient in the paired t-test). The mean values of tooth widths measurements of CAD/CAM, digital caliper and divider were 6.82 (±0.04), 6.94 (± 0.04) and 7.11 (± 0.04). There was a significant difference between the measurements made by the CAD/CAM and the divider. Additionally significant differences between the measurements by digital caliper and divider measurements (p < 0.05) were observed. No significant difference was found when comparing CAD/CAM to digital caliper. Positive correlation was displayed between CAD/CAM, digital caliper and the divider, but the measurements completed with the digital caliper had the highest correlation with the CAD/CAM. The difference was not significant between the aforementioned measurement tools (p > 0.05). Arch perimeter measurements showed no statistical significant difference between CAD/CAM, digital caliper and divider (p < 0.05). Conclusion: Archived plaster models stored as records can be converted to digital models as it will have the same accuracy of measurements. The value of doing a space analysis with the CAD/CAM system can be performed with similar reliability on the digital models as a caliper on plaster models.
Livres sur le sujet "CAO modèl"
Britzke, Ron. Spindizzy : The roaring rise of model car racing, 1938-1950. Newburgh, N.Y. (94 Carter Ave, Newburgh 12550) : R. Britzke, 1985.
Trouver le texte intégralJackson, Colin. Slot car racing. Hersham : Ian Allan, 2009.
Trouver le texte intégralSchleicher, Robert H. Slot car bible. St. Paul, MN : MBI Pub. Co., 2002.
Trouver le texte intégralGreat Britain. Manpower Services Commission. Skills Training Agency. et Engineering Industry Training Board, dir. Illustrative model scheme for CAD/CAM advanced manufacturing technician [mechanical engineering]. [Sheffield] : [M.S.C.], 1986.
Trouver le texte intégralSchuster, Richard, Dietmar Trippner et Michael Endres. CAD*I Drafting Model. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84058-6.
Texte intégralChaiken, Jan M. Patrol car allocation model. Santa Monica, CA : Rand, 1985.
Trouver le texte intégralSchuster, R. CAD I drafting model. Berlin : Springer-Verlag, 1990.
Trouver le texte intégralSchuster, R. CAD*I drafting model. Berlin : Springer-Verlag, 1990.
Trouver le texte intégralHuxley Pig's model car. New York, N.Y : Delacorte Press, 1990.
Trouver le texte intégralMurphy, Don. Pinewood ! : The story of the Pinewood Derby. Torrance, CA : Murphy Enterprises, 2001.
Trouver le texte intégralChapitres de livres sur le sujet "CAO modèl"
Tollenaere, Michel, Philippe Belloy et Serge Tichkiewitch. « A part description model for the preliminary design ». Dans Advanced CAD/CAM Systems, 127–43. Boston, MA : Springer US, 1995. http://dx.doi.org/10.1007/978-0-387-34834-6_7.
Texte intégralSivaneri, N. T., et Y. P. Xie. « Finite-Element Model for Modal Analysis of Pretwisted Unsymmetric Blades ». Dans CAD/CAM Robotics and Factories of the Future ’90, 225–30. Berlin, Heidelberg : Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-84338-9_32.
Texte intégralSivaneri, N. T., et Y. P. Xie. « Finite-Element Model for Modal Analysis of Pretwisted Unsymmetric Blades ». Dans CAD/CAM Robotics and Factories of the Future ’90, 225–30. Berlin, Heidelberg : Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-85838-3_32.
Texte intégralKing, Robin G. « A Structural Model of Creative Process for Improved Interface Design ». Dans Advances in CAD/CAM Workstations, 127–43. Boston, MA : Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-2273-3_13.
Texte intégralGottschalch, Holm. « Conception of CAD/CAM Training for Technical Draughtsmen in a Model Experiment ». Dans Social Science Research on CAD/CAM, 158–66. Heidelberg : Physica-Verlag HD, 1988. http://dx.doi.org/10.1007/978-3-642-52380-9_18.
Texte intégralRawat, Aditi, Deepkamal Kaur Gill, Divya Bajaj, Mamta Juneja, Anand Gupta et Prashant Jindal. « Craniofacial Model Generation Using CAD/CAM Software ». Dans Proceedings of 2nd International Conference on Communication, Computing and Networking, 795–803. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1217-5_79.
Texte intégralSchuster, Richard, Dietmar Trippner et Michael Endres. « Introduction ». Dans CAD*I Drafting Model, 1–4. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84058-6_1.
Texte intégralSchuster, Richard, Dietmar Trippner et Michael Endres. « The Drafting Model ». Dans CAD*I Drafting Model, 5–13. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84058-6_2.
Texte intégralSchuster, Richard, Dietmar Trippner et Michael Endres. « Drafting Resources ». Dans CAD*I Drafting Model, 14–26. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84058-6_3.
Texte intégralSchuster, Richard, Dietmar Trippner et Michael Endres. « Drawing Organization ». Dans CAD*I Drafting Model, 27–56. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84058-6_4.
Texte intégralActes de conférences sur le sujet "CAO modèl"
Lee, Chen-Han, Lingyun Lu, Jon Dym et Guangyan Yin. « Shape Preserving Global Parameterization for CAD/CAM/CAE ». Dans ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60274.
Texte intégralWise, Timothy D. « Interface of optical design programs to CAD/CAE/CAM software ». Dans OSA Annual Meeting. Washington, D.C. : Optica Publishing Group, 1987. http://dx.doi.org/10.1364/oam.1987.tuk3.
Texte intégralWearring, Colin. « The Functional Feature Model : Bridging the CAD/CAM Gap ». Dans ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/cie-1653.
Texte intégralWearring, Colin. « The Functional Feature Model : Bridging the CAD/CAM Gap ». Dans ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/cie-1656.
Texte intégralGujarathi, G. P., et Y. S. Ma. « Generative CAD and CAE integration using common data model ». Dans 2010 IEEE International Conference on Automation Science and Engineering (CASE 2010). IEEE, 2010. http://dx.doi.org/10.1109/coase.2010.5584195.
Texte intégralDesrochers, Alain. « A CAD/CAM Representation Model Applied to Tolerance Transfer Methods ». Dans ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dac-5636.
Texte intégralNonaka, Norihiko, et Ichirou Nishigaki. « An Automatic Technique for CAE Analysis With a 3D-CAD Model ». Dans ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/detc2002/cie-34486.
Texte intégralRuiz, Carlos E., Paul R. Schroeder, Michael R. Palermo et Terry K. Gerald. « Evaluation of Contaminant Flux from CAD Sites Using the CAP Model ». Dans Third Specialty Conference on Dredging and Dredged Material Disposal. Reston, VA : American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40680(2003)26.
Texte intégralSong, Xiaowen, Daoning Ying et Erjian Wang. « Feature representation product model for a progressive die CAD/CAM system ». Dans Wuhan - DL tentative, sous la direction de Shuzi Yang, Ji Zhou et Cheng-Gang Li. SPIE, 1996. http://dx.doi.org/10.1117/12.235547.
Texte intégralScheffler, Robert, Sergej Koch, Gregor Wrobel, Matthias Pleßow, Christian Buse et Bernd-Arno Behrens. « Modelling CAD Models - Method for the Model Driven Design of CAD Models for Deep Drawing Tools ». Dans 4th International Conference on Model-Driven Engineering and Software Development. SCITEPRESS - Science and and Technology Publications, 2016. http://dx.doi.org/10.5220/0005799403770383.
Texte intégralRapports d'organisations sur le sujet "CAO modèl"
Domm, T. C., et R. S. Underwood. Model-Based Engineering and Manufacturing CAD/CAM Benchmark. Office of Scientific and Technical Information (OSTI), octobre 1999. http://dx.doi.org/10.2172/14442.
Texte intégralDomm, T. D., et R. S. Underwood. Model-Based Engineering and Manufacturing CAD/CAM Benchmark. Office of Scientific and Technical Information (OSTI), avril 1999. http://dx.doi.org/10.2172/6890.
Texte intégralPokorny, Richard, et Pavel R. Hrma. Mathematical Model of Cold Cap?Preliminary One-Dimensional Model Development. Office of Scientific and Technical Information (OSTI), mars 2011. http://dx.doi.org/10.2172/1012879.
Texte intégralNovy-Marx, Robert. How Can a Q-Theoretic Model Price Momentum ? Cambridge, MA : National Bureau of Economic Research, février 2015. http://dx.doi.org/10.3386/w20985.
Texte intégralEngel, Charles. Can the Markov Switching Model Forecast Exchange Rates ? Cambridge, MA : National Bureau of Economic Research, novembre 1992. http://dx.doi.org/10.3386/w4210.
Texte intégralKitago, Masaki, Shunsuke Ehara et Ichiro Hagiwara. Efficient Construction of Finite Element Model by Implicit Function Approximation of CAD Model. Warrendale, PA : SAE International, mai 2005. http://dx.doi.org/10.4271/2005-08-0127.
Texte intégralKnorr, Jeffrey B. A CAD Model for the Inductive Strip in Finline. Fort Belvoir, VA : Defense Technical Information Center, août 1988. http://dx.doi.org/10.21236/ada199346.
Texte intégralConover, D. R., et R. G. Lucas. Differences between the 1993 and 1995 CABO Model Energy Codes. Office of Scientific and Technical Information (OSTI), octobre 1995. http://dx.doi.org/10.2172/390387.
Texte intégralEdmans, Alex, Xavier Gabaix et Augustin Landier. A Calibratable Model of Optimal CEO Incentives in Market Equilibrium. Cambridge, MA : National Bureau of Economic Research, septembre 2007. http://dx.doi.org/10.3386/w13372.
Texte intégralConover, D. R., et R. G. Lucas. Differences between the 1992 and 1993 CABO Model Energy Codes. Office of Scientific and Technical Information (OSTI), janvier 1995. http://dx.doi.org/10.2172/10111902.
Texte intégral