Littérature scientifique sur le sujet « Calibration chamber test »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Calibration chamber test ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Calibration chamber test"
Been, K., B. E. Lingnau, J. H. A. Crooks et B. Leach. « Cone penetration test calibration for Erksak (Beaufort Sea) sand ». Canadian Geotechnical Journal 24, no 4 (1 novembre 1987) : 601–10. http://dx.doi.org/10.1139/t87-074.
Texte intégralHazen, John, et L. Scorsone. « Infrared Sensor Calibration Facility ». Journal of the IEST 35, no 1 (1 janvier 1992) : 33–40. http://dx.doi.org/10.17764/jiet.2.35.1.d536816582691754.
Texte intégralGoh, Anthony T. C. « Neural Networks for Evaluating CPT Calibration Chamber Test Data ». Computer-Aided Civil and Infrastructure Engineering 10, no 2 (mars 1995) : 147–51. http://dx.doi.org/10.1111/j.1467-8667.1995.tb00277.x.
Texte intégralKurup, P. U., G. Z. Voyiadjis et M. T. Tumay. « Calibration Chamber Studies of Piezocone Test in Cohesive Soils ». Journal of Geotechnical Engineering 120, no 1 (janvier 1994) : 81–107. http://dx.doi.org/10.1061/(asce)0733-9410(1994)120:1(81).
Texte intégralTeh, Cee-Ing. « Calibration Chamber Studies of Piezocone Test in Cohesive Soils ». Journal of Geotechnical Engineering 121, no 5 (mai 1995) : 454–56. http://dx.doi.org/10.1061/(asce)0733-9410(1995)121:5(454).
Texte intégralShweikani, R., et G. Raja. « Design, construct and test of a calibration radon chamber ». Radiation Measurements 40, no 2-6 (novembre 2005) : 316–19. http://dx.doi.org/10.1016/j.radmeas.2005.05.010.
Texte intégralShang, Jinkui, Ronghuan Zhao, Zhaonan Xu et Hongjie Zhong. « Research on global calibration technology of pressure sensitive paint based on airtight chamber ». Journal of Physics : Conference Series 2364, no 1 (1 novembre 2022) : 012022. http://dx.doi.org/10.1088/1742-6596/2364/1/012022.
Texte intégralGibbons, David. « Environmental Chamber Temperature Calibration : Which Method to Use ? » Journal of the IEST 49, no 2 (1 octobre 2006) : 8–15. http://dx.doi.org/10.17764/jiet.49.2.2603362qtt442142.
Texte intégralRidwan, M., et T. Taryo. « Implementation of Fuzzy Logic Controller for Pressure Sensor Calibration Chamber ». International Journal of Automotive and Mechanical Engineering 18, no 2 (26 juillet 2021) : 8825–32. http://dx.doi.org/10.15282/ijame.18.2.2021.20.0676.
Texte intégralStraż, Grzegorz. « Preliminary investigations of organics soil in a new calibration chamber with the use of the FVT and DPL probe ». E3S Web of Conferences 49 (2018) : 00109. http://dx.doi.org/10.1051/e3sconf/20184900109.
Texte intégralThèses sur le sujet "Calibration chamber test"
Butlanska, Joanna. « Cone penetration test in a virtual calibration chamber ». Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/279364.
Texte intégralLos ensayos de penetración estática de cono (CPT) son una de las herramientas más importantes en el reconocimiento geotécnico. La interpretación de los resultados de ensayo en arcilla ha avanzado considerablemente desde un punto de vista teórico y numérico. Sin embargo la interpretación de los resultados en los materiales granulares por ejemplo arena) todavía está basada en correlaciones empíricas provenientes de las pruebas realizadas en cámaras de calibración (CC), donde el estado del suelo y sus propiedades pueden ser controlados. Las cámaras de calibración son equipos relativamente grandes, y los ensayos en ellas son bastante costosos en tiempo y recursos. Por otra parte, las pruebas se realizan en muestras de arenas reconstituidas cuyas propiedades varían respecto de los depósitos naturales de donde provienen. Por lo tanto, las correlaciones desarrolladas en un tipo de arena podrían no ser adecuadas para otro depósito distinto. Cámaras de calibración numéricas (virtuales) basadas en el método de elementos discretos (DEM) podrían ofrecer una alternativa interesante a los ensayos físicos. Este estudio es el primer intento de realizar una simulación basadas en el método de los elementos discretos tridimensionales de ensayos de penetración de cono. El código comercial tridimensional (PFC3D) ha sido usado para desarrollar el modelo de CPT de Cámara de Calibración Virtual (CPT VCC). Para alcanzar este objetivo fueron necesarios varios pasos. En primer lugar, se llevó acabo la calibración de un material discreto análogo a arena de Ticino mediante ensayos elementales. A continuación se construyó el modelo CPT VCC. Un análisis dimensional exhaustivo mostró que la mejor opción para crear un modelo eficiente y real era llenar la cámara con un material con el tamaño de grano 50 veces mayor que el de la arena de Ticino. Se propuso una técnica original de filtrado para extraer la resistencia de punta estacionaria. Se realizó una serie básica de simulaciones para explorar el efecto de la tensión inicial y la densidad relativa sobre la resistencia de cono. Los resultados obtenidos de las simulaciones se ajustan estrechamente a las tendencias establecidas previamente en cámaras físicas. Este resultado fue tomado como una validación general del programa de simulación propuesto. Desde el punto de vista de la micro-mecánica, el material granular es muy discontinuo y no homogéneo. La obtención de un estado inicial homogéneo (especialmente en la zona de penetración del cono) es crucial para obtener resultados fácilmente interpretables. Por lo tanto se han desarrollado procedimientos específicos para evaluar heterogeneidades del estado inicial. Los resultados manifestaron el papel clave del contorno de modelo (paredes rígidas), tanto pasivo como activo (servo-controlados), durante la formación del modelo. Los modelos basados en el DEM puede proporcionar resultados a varios niveles de la resolución, es decir del micro-, meso- y macro escala. Se ha realizado una gran serie de VCC CPT. Las simulaciones se realizaron para modelos con diferentes posiciones en las paredes horizontales de servo-control, varios tamaños de cámara, varios tamaños del cono y de las partículas y dos condiciones de contorno. Los resultados se analizaron centrándose en varios aspectos como el tamaño de la cámara, el tamaño de las partículas y los efectos de condiciones de contorno sobre el valor de la resistencia de punta. Un número limitado de los CPT fue examinado desde el punto de vista de la resistencia del fuste del cono. Se observó que la mayoría de las tendencias y los resultados obtenidos estaban de acuerdo con resultados previos obtenidos en ensayos físicos. El trabajo presentado en esta tesis debería facilitar futuras calibraciones CPT en materiales granulados.
Bauer, Zachary Obenour. « A Calibration Method for a Controlled Reception Pattern Antenna and Software Defined Radio Configuration ». Ohio University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1357402542.
Texte intégralCucciarrè, Francesca. « Numerical and experimental methods for design and test of units and devices on BepiColombo Mission ». Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3423379.
Texte intégralL’anno 2015 vedrà l’inizio della missione BepiColombo, promossa dall’Agenzia Spaziale Europea (ESA) in collaborazione con l’Agenzia Spaziale Giapponese (JAXA): la missione scientifica permetterà di approfondire la conoscenza di Mercurio, il pianeta più interno del Sistema Solare, studiandone la superficie, la composizione interna e il campo magnetico, consentendo inoltre di investigare sulle cause che hanno portato alla nascita dei pianeti e sulla loro evoluzione nel tempo. Il segmento di volo è costituito da 2 satelliti distinti: il Mercury Planet Orbiter (MPO), sotto la diretta responsabilità dell’ESA, che supporta la strumentazione per remote sensing e radioscienza, e il Mercury Magnetospheric Orbiter (MMO), che supporta la strumentazione per lo studio del campo magnetico e che è assegnato al controllo della JAXA. L’Italia riveste un ruolo fondamentale nell’ambito della missione dal momento che l’Agenzia Spaziale Italiana è coinvolta nella progettazione e nello sviluppo della suite SIMBIO-SYS (Spectrometer and Imagers for Mpo Bepicolombo Integrated Observatory SYStem), un pacchetto integrato di strumenti costituito da un sistema per imaging stereo (STC), da un sistema per imaging ad alta risoluzione (HRIC) e da uno spettrometro nel campo delle lunghezze d’onda del visibile e dell’infrarosso (VIHI). A causa della vicinanza del pianeta al Sole, MPO opererà in un ambiente ostile ed estremo dal punto di vista termico, di conseguenza il satellite e la strumentazione saranno dotati di sofisticati sistemi per il controllo termico attivo e passivo (ad esempio sistemi di baffling per la reiezione dei flussi). Partendo dalla comprensione e dalla conoscenza dello scenario termico in cui la strumentazione si troverà ad operare, grazie ai risultati dei modelli matematici previsionali, sono stati ideati e progettati diversi setup sperimentali innovativi al fine di simulare in laboratorio i flussi termici ambientali. Inizialmente è stata condotta una campagna di test sui modelli termo-strutturali (STM) dei baffles di SIMBIO-SYS, sottoponendo i dispositivi al flusso infrarosso planetario, simulato da lampade infrarosse e sorgenti fredde in condizioni di vuoto e assicurando diversi livelli di temperature alle interfacce termiche delle unità. In seguito alla campagna di test, i modelli matematici e termici dei baffles sono stati validati, mediante la procedura di correlazione con i risultati sperimentali; grazie alla validazione, è stato quindi possibile raffinare i modelli termici del modello da volo dei baffles. In secondo luogo è stato ideato e progettato un set-up per testare il Qualification Model del baffle Stavroudis di HRIC: durante i test, in programma per gennaio e febbraio 2013, saranno simulati anche i flussi solari, grazie all’innovativo simulatore solare progettato al CISAS, allo scopo di qualificare lo strumento riproducendo in vuoto le minime e massime temperature operative e non operative e i flussi termici (solare e infrarosso) più critici. All’attività precedentemente descritta è stato affiancato il design di due camere termovuoto che verranno utilizzate in fase di calibrazione e qualifica dei modelli da volo di STC, VIHI e HRIC, con e senza baffles. A partire dall’analisi delle prestazioni degli strumenti e da una serie di requisiti meccanici, termici, elettrici, di vuoto, di cleanliness e contamination, è stato effettuato uno studio di fattibilità, a cui sono seguiti il design preliminare delle camere, una serie di analisi strutturali e termiche di dettaglio (per simulare in camera da vuoto le interfacce meccaniche e termiche degli strumenti), la progettazione elettrica, il procurement dei componenti e l’attività di test sui sistemi progettati, al fine di verificare i requisiti iniziali imposti. Grazie a queste attività, sono stati sviluppati e validati una serie di metodi, procedure e tecniche, sia dal punto di vista numerico che sperimentale, al fine di fornire un contributo utile ed originale alla progettazione e alla verifica della strumentazione della suite SIMBIO-SYS a bordo della missione BepiColombo
Hofman, Jiří. « Testovací metody pro hodnocení radiačních efektů v přesných analogových a signálově smíšených obvodech pro aplikace v kosmické elektronice ». Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401588.
Texte intégralBARROS, GUSTAVO A. S. J. « Projeto de um laboratorio integrado de calibracao de instrumentos no IPEN ». reponame:Repositório Institucional do IPEN, 2009. http://repositorio.ipen.br:8080/xmlui/handle/123456789/9372.
Texte intégralMade available in DSpace on 2014-10-09T14:04:32Z (GMT). No. of bitstreams: 0
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
Lazar, Václav. « Kalibrace experimentálního zařízení pro testování kosmických technologií ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401523.
Texte intégralGiusti, Ilaria. « Improvement of piezocone test interpretation for partial drainage conditions and for transitional soils ». Doctoral thesis, 2017. http://hdl.handle.net/2158/1138812.
Texte intégralWang, Toong-Lih, et 王統立. « CPT Chamber Calibration Tests in High Fines Content Silty Sand ». Thesis, 2000. http://ndltd.ncl.edu.tw/handle/09974404996149501498.
Texte intégral國立交通大學
土木工程系
88
Because of the lack of cohesion, it is very difficult to obtain undisturbed samples for sand. In situ tests are often used to determine the engineering properties of sand. The cone penetration test (CPT) is a popular in situ test method. As in many other types of in situ test methods, the interpretation of CPT is mostly empirical. These empirical interpretation rules are mostly developed based on chamber calibration tests in the laboratory, and limited theoretical considerations. Most of the available empirical rules came from Europe or Northern America, based on tests in uniformly graded, clean sand. The sand on the West Coast of Taiwan, including that at the 6th Naptha project site in Mai Liao, Yuen Lin, contains significant amount of silt. Experiments have indicated that this type of sand is compressible and crushable,and has less tendency to dilate. Differences in engineering properties between uniformly graded clean quartz sand and silty sand with different mineral contents can be significant. Hence, to directly adopt the empirical CPT interpretation rules developed for clean quartz, to the sand on the West Coast of Taiwan is not desirable. The main objective of this research project is to evaluate the feasibility of the existing empirical CPT interpretation methods for Mai Liao silty sand (MLS), and establish new empirical methods for the interpretation of CPT performed in Mai Liao silty sand.A series of dry and saturated CPT calibration tests have been conducted in sand with fines contents as high as 50%. This thesis describes the background of the research, its objectives, research approach, procedures of the CPT calibration tests and test results. The CPT data are analyzed and a new empirical rule is proposed specifically for CPT in silty sand.
Chen, Simon. « Test et calibrations technologiques avec PICO-0.1 pour les futurs détecteurs de chambre à bulle de matière sombre de PICO ». Thesis, 2020. http://hdl.handle.net/1866/24366.
Texte intégralAmongst the dozens of experiments aiming to be the first to claim a dark matter signal, PICO is a direct dark matter detection experiment that utilizes superheated liquid detectors as a means of doing so. The latest C3F8 filled PICO-40L bubble chamber currently located in the SNOLAB underground laboratory is under testing to prepare for a 1 live-year blinded WIMP (Weakly Interacting Massive Particle) search. To ensure the stability of the detector during both the testing and the data acquisition phases, a monitoring software was coded. A reliable way to monitor all the parameters and to send alerts accordingly plays an important role in not only the success of PICO-40L, but also the development of the future larger-scale PICO-500 detector. PICO-0.1 is a test bubble chamber located at the University of Montreal that was built to calibrate for the numerous background events that can occur in this kind of technology. This test chamber was also used as a world’s first attempt to measure the coherent (Thomson) photon scattering onto a nucleus by exposing the C3F8 filled detector to a gamma source produced by the 19F proton to alpha and gamma 16O reaction using a proton beam created by the University of Montreal particle accelerator. This kind of interaction will prove to be a significant background for future sub-keV direct dark matter detection experiments.
Livres sur le sujet "Calibration chamber test"
Kelly, Abeyounis William, et Langley Research Center, dir. 16-foot transonic tunnel test section flowfield survey. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1994.
Trouver le texte intégralK, Abeyounis W., et Langley Research Center, dir. 16-foot transonic tunnel test section flowfield survey. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1994.
Trouver le texte intégralKelly, Abeyounis William, et Langley Research Center, dir. 16-foot transonic tunnel test section flowfield survey. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1994.
Trouver le texte intégralT, Pickett Mark, Soeder Ronald H et Lewis Research Center, dir. Baseline calibration of the NASA Lewis Research Center 8- by 6-foot supersonic wind tunnel (1991 and 1992 tests). [Cleveland, Ohio] : National Aeronautics and Space Administration, Lewis Research Center, 1998.
Trouver le texte intégralCenter, Langley Research, dir. Cryogenic pressure calibrator for wide temperature electronically scanned (ESP) pressure modules. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 2001.
Trouver le texte intégral16-foot transonic tunnel test section flowfield survey. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1994.
Trouver le texte intégralLow speed calibration of the NASA Lewis Research Center 8- by 6-foot supersonic wind tunnel (1995 test) : Under contract NAS3-27186. [Washington, DC : National Aeronautics and Space Administration, 1997.
Trouver le texte intégralChapitres de livres sur le sujet "Calibration chamber test"
Airoldi, Sergio, Alberto Bretschneider, Vincenzo Fioravante et Daniela Giretti. « Validation of In-Situ Probes by Calibration Chamber Tests ». Dans Springer Series in Geomechanics and Geoengineering, 659–62. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-97112-4_147.
Texte intégralSong, Y., X. Q. Gu et J. Hu. « DEM-FDM coupling simulation of cone penetration tests in a virtual calibration chamber ». Dans Cone Penetration Testing 2022, 703–7. London : CRC Press, 2022. http://dx.doi.org/10.1201/9781003329091-103.
Texte intégralSkrede, H., H. B. Hammer, S. Nordal et J. S. L’Heureux. « CPTU-detection of thin clay layers in sand : Results from calibration chamber tests ». Dans Cone Penetration Testing 2022, 690–96. London : CRC Press, 2022. http://dx.doi.org/10.1201/9781003329091-101.
Texte intégralSkrede, H., H. B. Hammer, S. Nordal et J. S. L’Heureux. « CPTU-detection of thin clay layers in sand : Results from calibration chamber tests ». Dans Cone Penetration Testing 2022, 690–96. London : CRC Press, 2022. http://dx.doi.org/10.1201/9781003308829-101.
Texte intégralSong, Y., X. Q. Gu et J. Hu. « DEM-FDM coupling simulation of cone penetration tests in a virtual calibration chamber ». Dans Cone Penetration Testing 2022, 703–7. London : CRC Press, 2022. http://dx.doi.org/10.1201/9781003308829-103.
Texte intégral« Calibration chamber test data ». Dans Soil Liquefaction, 549–76. CRC Press, 2015. http://dx.doi.org/10.1201/b19114-16.
Texte intégralActes de conférences sur le sujet "Calibration chamber test"
He, Jinliang, Zhiyong Yuan, Rong Zeng, Shuiming Chen, Bo Zhang et Fan Wu. « Evaluation of Test Reproducibility of Calibration in Reverberation Chamber ». Dans 2007 IEEE International Symposium on Electromagnetic Compatibility. IEEE, 2007. http://dx.doi.org/10.1109/isemc.2007.203.
Texte intégralMeier, Rudolf H., et Clyde A. Randolph. « Surveillance Sensor Test Chamber : System Design Concepts Of Internal Calibrator And Of Calibration Sources ». Dans 1988 Technical Symposium on Optics, Electro-Optics, and Sensors, sous la direction de R. Barry Johnson et Milton J. Triplett. SPIE, 1988. http://dx.doi.org/10.1117/12.947139.
Texte intégralMende, Michael. « Calibration Of Infrasound Measurement Devices ». Dans NCSL International Workshop & Symposium. NCSL International, 2016. http://dx.doi.org/10.51843/wsproceedings.2016.42.
Texte intégralColak, Bektas. « A comparative study on the calibration of Frequency domain reflection measurements for a compact test chamber ». Dans 2016 9th International Kharkiv Symposium on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves (MSMW). IEEE, 2016. http://dx.doi.org/10.1109/msmw.2016.7538175.
Texte intégralAyala Torres, Juan, Andries Fourie et David Reid. « Development of a new large calibration chamber for testing thickened tailings with the cone penetration test ». Dans 23rd International Conference on Paste, Thickened and Filtered Tailings. Gecamin Publications, Santiago, 2020. http://dx.doi.org/10.36487/acg_repo/2052_51.
Texte intégralPlatte, Thomas. « Development of a Primary Dynamic Calibration Method for Pressure Sensors ». Dans 19th International Congress of Metrology (CIM2019), sous la direction de Sandrine Gazal. Les Ulis, France : EDP Sciences, 2019. http://dx.doi.org/10.1051/metrology/201927006.
Texte intégralPatankar, Gaurav, Simone Mancin, Justin A. Weibel, Suresh V. Garimella et Mark A. MacDonald. « A Method for Thermal Performance Characterization of Ultra-Thin Vapor Chambers Cooled by Natural Convection ». Dans ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48175.
Texte intégralYang, W. Q., A. Chondronasios, S. Nattrass, V. T. Nguyen, M. Betting, I. Ismail et H. McCann. « Adaptive Calibration of a Capacitance Tomography System for Imaging Water Droplets Distribution ». Dans ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58538.
Texte intégralGokhale, Manoj, Bhaskar Tamma, Roy J. Primus et Benzi John. « SFC Benefit With Split Injection in Two-Stroke Diesel Engine ». Dans ASME 2009 Internal Combustion Engine Division Spring Technical Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/ices2009-76022.
Texte intégralRhyner, Daniel J. « Evaluation of Horizontal Recirculatory Air Curtain Efficiencies : Cooler to Conditioned Space ». Dans ASME 2014 Citrus Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/cec2014-5801.
Texte intégral