Littérature scientifique sur le sujet « Bosch method »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Bosch method ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Bosch method"
Alekseev, R. A., Aleksandra I. Alieva et Ewelina Kucal. « Aspect-Independent Siliconglass Etching by Bosch Method ». Key Engineering Materials 822 (septembre 2019) : 640–46. http://dx.doi.org/10.4028/www.scientific.net/kem.822.640.
Texte intégralFerrari, Alessandro, et Tantan Zhang. « Benchmark between Bosch and Zeuch method–based flowmeters for the measurement of the fuel injection rate ». International Journal of Engine Research 22, no 1 (4 mars 2019) : 316–27. http://dx.doi.org/10.1177/1468087419827732.
Texte intégralVeltkamp, Henk-Willem, Yves L. Janssens, Meint J. de Boer, Yiyuan Zhao, Remco J. Wiegerink, Niels R. Tas et Joost C. Lötters. « Method for Keyhole-Free High-Aspect-Ratio Trench Refill by LPCVD ». Micromachines 13, no 11 (4 novembre 2022) : 1908. http://dx.doi.org/10.3390/mi13111908.
Texte intégralBaracu, Angela M., Christopher A. Dirdal, Andrei M. Avram, Adrian Dinescu, Raluca Muller, Geir Uri Jensen, Paul Conrad Vaagen Thrane et Hallvard Angelskår. « Metasurface Fabrication by Cryogenic and Bosch Deep Reactive Ion Etching ». Micromachines 12, no 5 (29 avril 2021) : 501. http://dx.doi.org/10.3390/mi12050501.
Texte intégralVass, Sándor, et Máté Zöldy. « A model based new method for injection rate determination ». Thermal Science, no 00 (2020) : 159. http://dx.doi.org/10.2298/tsci190417159v.
Texte intégralHermawan, Bayu, Arif Budi Sholihah et Putri Ayu Pramanasari. « Evaluation of the Implementation of the Revitalization Program in Preservation of Van Den Bosch Fortress in Ngawi ». International Journal of Architecture and Urbanism 3, no 1 (31 mars 2019) : 9–18. http://dx.doi.org/10.32734/ijau.v3i1.780.
Texte intégralZhou, Rongchun, Haixia Zhang, Yilong Hao et Yangyuan Wang. « Simulation of the Bosch process with a string–cell hybrid method ». Journal of Micromechanics and Microengineering 14, no 7 (15 mai 2004) : 851–58. http://dx.doi.org/10.1088/0960-1317/14/7/003.
Texte intégralDu, Peiyuan, Yuhong Huang, Gangqiang Zhu, Fei Ma, Jianmin Zhang, Xiumei Wei, Pengfei Hou, Min Wang et Jing Liu. « Nitrogen reduction reaction on single cluster catalysts of defective PC6-trimeric or tetrameric transition metal ». Physical Chemistry Chemical Physics 24, no 4 (2022) : 2219–26. http://dx.doi.org/10.1039/d1cp04926g.
Texte intégralDrtina, René, et Josef Šedivý. « Logatomic Tests as a Method of Evaluation of Speech Intelligibility in High Resolution ». Applied Mechanics and Materials 835 (mai 2016) : 795–99. http://dx.doi.org/10.4028/www.scientific.net/amm.835.795.
Texte intégralKoch, Brendan M. L., Janet A. W. Elliott et A. Amirfazli. « Study of Model Superoleophobic Surfaces Fabricated with a Modified Bosch Etch Method ». Langmuir 30, no 46 (12 novembre 2014) : 14039–47. http://dx.doi.org/10.1021/la503362t.
Texte intégralThèses sur le sujet "Bosch method"
Hromádková, Simona. « Efektivní řízení nákladů ve firmě Bosch Diesel s.r.o ». Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2007. http://www.nusl.cz/ntk/nusl-221481.
Texte intégralBosch, Thomas [Verfasser], et Gerhard [Akademischer Betreuer] Winter. « Aggressive Freeze-Drying : a fast and suitable method to stabilize biopharmaceuticals / Thomas Bosch. Betreuer : Gerhard Winter ». München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2014. http://d-nb.info/1065610173/34.
Texte intégralBosch, Thomas [Verfasser], et Peter [Akademischer Betreuer] Klemm. « Methode zur Reduktion technischer Nebenzeiten in der spanenden Fertigung / Thomas Bosch ; Betreuer : Peter Klemm ». Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2016. http://d-nb.info/1123082626/34.
Texte intégralMahdalová, Eva. « Studie koncepce řízení oběhu obalů ve společnosti Bosch Diesel s. r. o ». Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2013. http://www.nusl.cz/ntk/nusl-224019.
Texte intégralWhite, Joey, et Joseph Policella. « A SYSTEMATIC METHOD FOR SYNTHESIS OF OBJECT ORIENTED SOFTWARE DESIGNS FOR TELEMETRY SIMULATION ». International Foundation for Telemetering, 1993. http://hdl.handle.net/10150/608827.
Texte intégralA tremendous amount of work has been done recently in the area of Object Oriented Design (OOD) methodology. Most often, texts and papers explaining these methodologies are centered around the explanation of some arcane graphical notation. One is led to believe that the key to understanding Object Orientedness in general will be found by understanding and applying this notation. An understanding of the essence of OOD is difficult to acquire in this manner due to the disproportionate amount of energy required to memorize the graphic symbology. The prospective designer is often left with an understanding of the symbols, but with no understanding of how to apply them to a real world large scale problem. This paper provides an explanation of the Object Oriented paradigm with an example application to telemetry measurements. Next this paper provides an explanation of the most popular graphic notation for Object Oriented Design, the Booch Notation. Finally, this paper shows an alternative graphic notation that can be effectively used in Object Oriented Design during the initial stages of design to help eliminate the learning curve associated with the more popular Object Oriented notations.
Sackmann, Christina. « Mythos Methoden-Training : Wirkungsanalyse der Implementierung des Methoden-Trainings im Prozess von Unterrichts- und Schulentwicklung an der Robert-Bosch-Gesamtschule Hildesheim / ». Göttingen : V und R Unipress, 2007. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=016033765&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texte intégralBosch, Ana van den [Verfasser], Gabriele [Gutachter] Arendt et Eva [Gutachter] Neuen-Jacob. « Die Evaulation einer neuen Screening-Methode für HIV-assoziierte neurokognitive Störungen / Ana van den Bosch ; Gutachter : Gabriele Arendt, Eva Neuen-Jacob ». Düsseldorf : Universitäts- und Landesbibliothek der Heinrich-Heine-Universität Düsseldorf, 2017. http://d-nb.info/1127200089/34.
Texte intégralSimões, Juliana Maria Gonçalves. « O processo de seleção da Bosch Car Multimedia : propostas de melhoria ». Master's thesis, 2017. http://hdl.handle.net/1822/46489.
Texte intégralO estudo aqui apresentado tem como objetivo sugerir melhorias ao processo de seleção da Bosch Car Multimedia (CM). Este estudo sobre o processo de seleção da Bosch CM torna-se importante nesta fase em que a organização se encontra num período de grande expansão. Desta feita, o Recrutamento e Seleção tornam-se relevantes na medida em que levarão a Gestão de Recursos Humanos a escolher os melhores colaboradores que intervirão e contribuirão para tal expansão. Tendo por base objetivo apresentado, foi utilizada uma metodologia qualitativa para levar a cabo a recolha da informação necessária ao cumprimento do objetivo. O trabalho de recolha de informação implicou a realização de 22 entrevistas aos intervenientes do processo de seleção da Bosch CM, assim como um grupo de foco aos colaboradores que passaram pelo processo de seleção da organização. A partir da análise da informação qualitativa recolhida foi possível perceber as perceções dos colaboradores sobre o processo de seleção no geral, e, mais especificamente, relativa aos métodos de seleção mais comumente utilizados pela Bosch CM. Através dos testemunhos descrevem-se os diferentes tipos de operacionalização do processo de seleção, quais os seus pontos positivos e negativos do ponto de vista dos participantes, as dificuldades que estes sentem e melhorias que os mesmos propõem. Foi ainda possível recolher testemunhos reais sobre os resultados a que os processos de seleção da organização têm levado. Com este trabalho foi então possível encetar uma proposta de melhora do processo de seleção da Bosch CM que contou com a participação dos seus colaboradores e que irá permitir à organização ajustar o processo aos perfis dos intervenientes, equacionar o modo de participação de cada interveniente no processo, redefinir aspetos importantes para o sucesso da seleção, entre outras.
This work has as an objective the suggestion of improvements to the selection process of Bosch Car Multimedia (CM). The study of the selection process at Bosch Car Multimedia becomes important in this phase where the organization is rapidly growing. Thus, Recruitment and Selection become relevant in the means that they will allow Human Resources Management to choose the best employees that will intervene and contribute to these expansions. With this underlying purpose, a qualitative methodology was used to carry out information gathering necessary to fulfil the objective. The information gathering process included the realization of 22 interviews on the participants of selection process of Bosch CM, as well as a focus group with employees that went through the organization’s selection process. From the qualitative information analysis it was possible to understand employees’ perception of the selection process in general, and more specifically, relative to the selection methods more commonly used by Bosch CM. According to the retrieved testimonies we can describe the different types of operations of the selection process, it’s negative and positive aspects from the participant’s perspective, the difficulties that arise and the improvements that were proposed. It was also possible to retrieve real testimonies regarding the results that the selection process has brought. This work allowed for the elaboration of a improvement proposal of Bosch CM’s selection process, that included the participation of it’s employees and will allow the organization to adjust the process to the participant’s profile, rethink the participation method of each intervenient, redefine important aspects of the selection process, amongst others.
Livres sur le sujet "Bosch method"
Rational rose essentials : Using the Booch method. Redwood City, Calif : Benjamin/Cummings Pub. Co., 1994.
Trouver le texte intégralUsing the Booch method : A rational approach. Redwood City, CA : Benjamin/Cummings Pub. Co., 1994.
Trouver le texte intégralC, Martin Robert. Designing object-oriented C++ applications using the Booch method. Englewood Cliffs, N.J : Prentice Hall, 1995.
Trouver le texte intégralLockheed Martin Advanced Concepts Center. et Rational Software Corporation, dir. Succeeding with the Booch and OMT methods : A practical approach. Menlo Park, Calif : Addison-Wesley, 1996.
Trouver le texte intégralChonoles, Michael Jesse. Succeeding with the Booch and OMT methods : A practical approach. Menlo Park : Addison-Wesley, 1996.
Trouver le texte intégralBooch, Grady. The best of Booch : Designing strategies for object technology. New York : SIGS Books, 1996.
Trouver le texte intégral1962-, Williams Charles B., dir. Use cases combined with BOOCH/OMT/UML : Process and products. Upper Saddle River, NJ : Prentice Hall PTR, 1997.
Trouver le texte intégralWorkshop on Computation of Biochemical Pathways and Genetic Networks (3rd 2003 Heidelberg, Germany). 3rd Workshop on Computation of Biochemical Pathways and Genetic Networks : EML Research, Villa Bosch, Heidelberg, October 6-7, 2003. Sous la direction de Gauges R. Berlin : Logos, 2003.
Trouver le texte intégralWorkshop on Computation of Biochemical Pathways and Genetic Networks (4th 2005 Heidelberg, Germany). 4th Workshop on Computation of Biochemical Pathways and Genetic Networks : A BioSim event : EML research, Villa Bosch, Heidelberg, September 12-13, 2005. Sous la direction de Kummer U. (Ursula) et EML Research (Firm). Berlin : Logos, 2005.
Trouver le texte intégralChapitres de livres sur le sujet "Bosch method"
Gabriel, Markus, Isabella Kessel, Thomas Quast et Eva Roth. « Praxisbeitrag : Multimethodenansatz in der Evaluation am Beispiel der Dialogveranstaltung „Mensch Wissenschaft!“ ». Dans Evaluationsmethoden der Wissenschaftskommunikation, 333–50. Wiesbaden : Springer Fachmedien Wiesbaden, 2023. http://dx.doi.org/10.1007/978-3-658-39582-7_21.
Texte intégralWehrum, Peter, et Dorothea Mehling. « Rational Rose : Objektorientierte Analyse und objektorientiertes Design nach der Booch-Methode ». Dans Objektorientierte Methoden für Informationssysteme, 208–12. Berlin, Heidelberg : Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-78270-1_14.
Texte intégralChanse, Victoria, et Jennifer Salazar. « Castiglion del Bosco Methods ». Dans Castiglion del Bosco. Landscape Architecture Foundation, 2012. http://dx.doi.org/10.31353/cs0261.
Texte intégralR., Deeksha, et Deepak Kumar. « Design of Supported Catalysts for Nitrogen Reduction Reaction : A Continuous Challenge ». Dans Advanced Materials and Nano Systems : Theory and Experiment (Part-1), 66–91. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815050745122010007.
Texte intégral« Chapter 1.1 Robert Bosch GmbH ». Dans Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters - A Patent-oriented Survey, 43–58. Elsevier, 1998. http://dx.doi.org/10.1016/s0167-2991(98)80931-2.
Texte intégral« Chapter 2.3 Robert Bosch GmbH ». Dans Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters - A Patent-oriented Survey, 259–64. Elsevier, 1998. http://dx.doi.org/10.1016/s0167-2991(98)80950-6.
Texte intégral« Chapter 3.4 Robert Bosch GmbH ». Dans Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters - A Patent-oriented Survey, 333–34. Elsevier, 1998. http://dx.doi.org/10.1016/s0167-2991(98)80962-2.
Texte intégralRittgen, Peter. « Modeling Information Systems in UML ». Dans Encyclopedia of Information Science and Technology, First Edition, 2001–6. IGI Global, 2005. http://dx.doi.org/10.4018/978-1-59140-553-5.ch353.
Texte intégralKhimicheva, Ganna, et Oleksii Dziuba. « BACKGROUND FOR DEVELOPING THE PARAMETER CONTROL SYSTEM OF THE COMFORT ZONE OF OFFICE PREMISES ». Dans Development of scientific, technological and innovation space in Ukraine and EU countries. Publishing House “Baltija Publishing”, 2021. http://dx.doi.org/10.30525/978-9934-26-151-0-35.
Texte intégralBuff, Xavier, et Tan Lei. « The quadratic dynatomic curves are smooth and irreducible ». Dans Frontiers in Complex Dynamics, sous la direction de Araceli Bonifant, Mikhail Lyubich et Scott Sutherland. Princeton University Press, 2014. http://dx.doi.org/10.23943/princeton/9780691159294.003.0005.
Texte intégralActes de conférences sur le sujet "Bosch method"
Sunh, Guangyi, Xin Zhao, Haixia Zhang, Lei Wang et Guizhang Lu. « 3-D Simulation of Bosch Process with Voxel-Based Method ». Dans 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2007. http://dx.doi.org/10.1109/nems.2007.352084.
Texte intégralHaiducu, Marius, Dan Sameoto, Ian Foulds, Robert W. Johnstone et Ash M. Parameswaran. « Bosch-like method for creating high aspect ratio poly(methyl methacrylate) (PMMA) structures ». Dans SPIE MOEMS-MEMS, sous la direction de Mary Ann Maher et Paul J. Resnick. SPIE, 2012. http://dx.doi.org/10.1117/12.908690.
Texte intégralLi, Xiao-Qian, Zai-Fa Zhou, Wei-Hua Li et Qing-An Huang. « Three-dimensional modeling and simulation of the Bosch process with the level set method ». Dans 2014 IEEE Sensors. IEEE, 2014. http://dx.doi.org/10.1109/icsens.2014.6985062.
Texte intégralTian, Sheng, Thomas Thundat, Subir Bhattacharjee, Kenneth C. Cadien et Sushanta K. Mitra. « On-Chip Power Generation : Microfluidic-Based Reactor for Catalytic Combustion of Methanol ». Dans ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62776.
Texte intégralCarlucci, Paolo, Antonio Ficarella, Antonio Giuffrida et Rosario Lanzafame. « Investigation on Realizing Fuel Rate Shaping Using a Common Rail Injector ». Dans ASME 2003 Internal Combustion Engine Division Spring Technical Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/ices2003-0599.
Texte intégralYang, Fanghao, Xiaochuan Li, Wenming Li et Chen Li. « Integrate Monolithic Nanostructures in Microchannels to Enhance Flow Boiling Heat Transfer of HFE-7000 ». Dans ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48737.
Texte intégralEngelmayer, Michael, Gert Taucher, Andreas Wimmer, Gernot Hirschl et Thomas Kammerdiener. « Impact of Very High Injection Pressure on Soot Emissions of Medium Speed Large Diesel Engines ». Dans ASME 2014 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icef2014-5692.
Texte intégralGulied, Mona, Sifani Zavahir, Tasneem Elmakki, Hazim Qiblawey, Bassim Hameed et Dong Suk Han. « Membrane Distillation Crystallization Hybrid Process for Zero Liquid Discharge in QAFCO Plant ». Dans Qatar University Annual Research Forum & Exhibition. Qatar University Press, 2021. http://dx.doi.org/10.29117/quarfe.2021.0010.
Texte intégralArcoumanis, C., et M. S. Baniasad. « Analysis of Consecutive Fuel Injection Rate Signals Obtained by the Zeuch and Bosch Methods ». Dans International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1993. http://dx.doi.org/10.4271/930921.
Texte intégralGodbold, Conner, Farzad Poursadegh, Oleksandr Bibik, Carlos De La Camara Castillo et Caroline Genzale. « A Multi-Wavelength Extinction Imaging Diagnostic for Quantifying Diesel Spray Mixing at Engine-Relevant Conditions ». Dans ASME 2020 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icef2020-2972.
Texte intégral