Littérature scientifique sur le sujet « Blast furnace slag (BFS) »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Blast furnace slag (BFS) ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Blast furnace slag (BFS)"
Mochida, Kazuki, Nobukatu Nito, Satoshi Fujiwara, Prang Subpa-Asa et Shigeyuki Date. « A Study on the Salt Preventive Properties of Blast Furnace Slag with Different Blaine Values and Curing Condition ». Materials Science Forum 1053 (17 février 2022) : 338–44. http://dx.doi.org/10.4028/p-1312is.
Texte intégralLi, Lin Bo, Jun Zhu, Qi Wang et Jun Yang. « Adsorption of Phosphate from Aqueous Solution with Blast Furnace Slag Activated by Hydrated Lime as Sorbent ». Materials Science Forum 620-622 (avril 2009) : 643–46. http://dx.doi.org/10.4028/www.scientific.net/msf.620-622.643.
Texte intégralPham Ngoc, Chuc, Nhiem Dao Ngoc, Bac Nguyen Quang, Dung Doan Trung, Chi Nguyen Thi Ha, Lim Duong Thi, Tan Vo Van, Phuong Hoang Thi et Dai Luu Minh. « Using bottom ash from the domestic waste incinerator to make building materials ». Vietnam Journal of Catalysis and Adsorption 10, no 1S (15 octobre 2021) : 1–7. http://dx.doi.org/10.51316/jca.2021.081.
Texte intégralLiu, Chao, Yue Kang, Yuzhu Zhang et Hongwei Xing. « Granulation Effect Analysis of Gas Quenching Blast Furnace Slag with Different Basicities ». Coatings 10, no 4 (9 avril 2020) : 372. http://dx.doi.org/10.3390/coatings10040372.
Texte intégralKadhim, M. J., L. M. Hasan et H. M. Kamal. « Investigating the effects of nano-blast furnace slag powder on the behaviour of composite cement materials ». Journal of Achievements in Materials and Manufacturing Engineering 116, no 1 (1 janvier 2023) : 5–10. http://dx.doi.org/10.5604/01.3001.0016.3392.
Texte intégralWang, Yunfeng, Bo Jiang, Ying Su, Xingyang He, Yingbin Wang et Sangkeun Oh. « Hydration and Compressive Strength of Activated Blast-Furnace Slag–Steel Slag with Na2CO3 ». Materials 15, no 13 (21 juin 2022) : 4375. http://dx.doi.org/10.3390/ma15134375.
Texte intégralBok, Young Jin, Sung Ho Tae, Taeh Young Kim et Jeong Hun Park. « A Study on Environmental Load Assessment of Early Strength Activator Blast Furnace Slag ». Advanced Materials Research 905 (avril 2014) : 383–87. http://dx.doi.org/10.4028/www.scientific.net/amr.905.383.
Texte intégralIrekti, Amar, Mehena Oualit, Zohra Ykene et Buncianu Dorel. « Rheological behavior of the composite matrix Diglycidylether of bisphenol-A (DGEBA/wt% blast furnace slag (BFS) ». IOP Conference Series : Materials Science and Engineering 1204, no 1 (1 novembre 2021) : 012008. http://dx.doi.org/10.1088/1757-899x/1204/1/012008.
Texte intégralÖzkan, Ömer, et Mehmet Sarıbıyık. « ALKALI SILICA REACTION OF BOF AND BFS WASTES COMBINATION IN CEMENT ». Journal of Civil Engineering and Management 19, no 1 (16 janvier 2013) : 113–20. http://dx.doi.org/10.3846/13923730.2012.734854.
Texte intégralVu Kim, Dien, Sofya Ildarovna Bazhenova, Trong Chuc Nguyen, Van Lam Tang, Minh Chien Do, Van Loi Le, Van Duong Nguyen, Cong Ly Nguyen et Minh Thuan Hoang. « Blast furnace slag properties at different grinding times and its effect on foam concrete properties ». Stavební obzor - Civil Engineering Journal 31, no 1 (30 avril 2022) : 32–44. http://dx.doi.org/10.14311/cej.2022.01.0003.
Texte intégralThèses sur le sujet "Blast furnace slag (BFS)"
Pawlowicz, Jakub. « Evaluation of air entraining behaviour in concrete using computer aided methods on hardened samples ». Thesis, KTH, Betongbyggnad, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264752.
Texte intégralBetongindustrins ökande medvetenhet om hållbarhet leder till att man inom dimensionering ochutförande fokuserar mot att undvika kostnadskrävande och oförutsedda underhållsåtgärder ochistället lägga större vikt på att förebygga skador i produktionens tidiga skeden. En av dessaåtgärder, som hanterar problemet frostnedbrytning, är en medveten inblandning av luftbubblor ibetongen. Mekanismen för att skapa luftporssystemet kan emellertid bli negativt påverkad underolika skeden av produktionen av många faktorer såsom cementtyp, tillsatsmedelsdos, gjutvillkoroch blandningsordning. Därför behöver man reflektera över pålitliga verktyg för utvärderingenav slutprodukten. Den experimentella studien, som presenteras i detta arbete, fokuserar motförståelse hur slagg och tillsatsmedelsdos påverkar den hårdnade betongens luftporssystem. Tretyper av cement utvärderades, dels ett normalt portlandcement, dels två typer av CEM III-cementmed olika andelar av slagg. Optimala mängder av luftporbildare och flyttillsatsmedel valdesmen reducerades senare för att undersöka deras inverkan på totalt luftinnehåll samt luftporernasavståndsfaktor och specifika yta. Den huvudsakliga metoden som valdes för denna utvärderingvar en flatbäddsscanner (kontorsmodell) för att ta bilder och användningen av en programvaravid namn BubbleCounter för att analysera luftporssystemet. Detta tillvägagångssätt baseras påanalys av tvärgående linjer och kräver en speciell behandling av ytan för att åstadkomma kontraster.Provkroppar för analysen sågades ut ur hårdnade betongkuber och polerades för att erhålla en jämnyta. Provkropparna var senare behandlade med svart bläck och zinkoxidpasta för att åstadkomma entydlig kontrast mellan de vita porerna och den svarta ytan av cementpasta och ballast. För att studeranoggrannheten hos denna metod användes som jämförelse även mer konventionella metoder sommätningar med trycksatta givare och luftporsanalys. De framtagna blandningarna visade signifikantaskillnader i luftporernas egenskaper mellan betong med normalt portlandcement och betong medslaggcement, där den senare påverkades i mindre grad av reduktioner i dosen luftporbildare.Förändringar I avståndsfaktor och specifik yta noterades också men försämringen följde inte sammamönster som den för totala luftinnehållet. Ingen signifikant skillnad mellan de två cementeninnehållande slagg kunde observeras. En intressant inverkan av det använda polykarboxylateterbaseradeflyttillsatsmedlet på luftporbildarens reaktivitet noterades. Den visade en försämringav luftporernas egenskaper vid en reduktion av mängden flyttillsatsmedel. En jämförelse avresultaten från de olika metoderna för luftporsanalys indikerade en övergripande överensstämmelsegällande de uppmätta luftporssystemens förändring p.g.a. förändringar i mängden luftporbildare.Programvaran BubbleCounter tenderade emellertid att något överskatta materialets motstånd motfrostnedbrytning med de mest optimistiska värdena för luftporernas avståndsfaktor och specifikayta.
Oberlink, Anne Elizabeth. « NON-PORTLAND CEMENT ACTIVATION OF BLAST FURNACE SLAG ». UKnowledge, 2010. http://uknowledge.uky.edu/gradschool_theses/25.
Texte intégralMcQueen, Mark. « Heat recovery from molten blast furnace slag in a fluidized bed ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ55918.pdf.
Texte intégralBoltz, Daniel Edward. « Early performance of concrete pavement containing ground granulated blast furnace slag ». Ohio : Ohio University, 1998. http://www.ohiolink.edu/etd/view.cgi?ohiou1176839817.
Texte intégralSchlesinger, Mark E. « LEAD OXIDE SOLUBILITY IN LEAD BLAST-FURNACE SLAGS (ACTIVITY, THERMODYNAMICS) ». Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/291261.
Texte intégralRyösä, Elin. « Mineral Reactions and Slag Formation During Reduction of Olivine Blast Furnace Pellets ». Doctoral thesis, Uppsala universitet, Institutionen för geovetenskaper, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9389.
Texte intégralTalefirouz, Davood. « Use Of Granulated Blast Furnace Slag, Steel Slag And Fly Ash In Cement-bentonite Slurry Wall Construction ». Master's thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615432/index.pdf.
Texte intégral9 m/s. Some investigations have pointed toward improved performance using admixtures that would provide low permeability. In this study, Soma thermal power plant fly ash, granulated blast furnace slag, lime, and steel slag are used as admixture to improve the performance of slurry walls. Permeability, compressive strength, slump, compressibility properties of the mixtures were found and checked for the minimum requirements. According to the findings of this study, granulated blast furnace slag (GGBS), fly ash and steel slag can be used at certain percentages and curing periods as additive in cement-bentonite barrier wall construction. Permeability of specimens having fly ash decreases by increasing fly ash content. Mixtures having 50 % of GGBS type I with 5 % of lime and 9% bentonite content gave acceptable results in 28 days of curing time. Specimens including 50 % of GGBS type II with 5 % of lime and 9% bentonite content gave the higher permeability value in 28 days of curing time with respect to GGBS type I. In addition, most of the mixtures prepared by steel slag gave the acceptable permeability values in 28 days of curing period. Unconfined compressive strength of all mixtures increase by increasing curing time. Cc, Cr, Cv, kcon values were found from consolidation test results. Permeability values found from consolidation tests are 10 times to 100 times higher than flexible wall k results for the same effective stress of 150 kPa. Generally, mv values are decreasing with increasing curing time. As mv decreases, D increases.
Ökvist, Lena Sundqvist. « Optimisation of the slag formation in a blast furnace charged with 100% pellets ». Licentiate thesis, Luleå tekniska universitet, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18685.
Texte intégralGodkänd; 2001; 20070313 (ysko)
Andersson, Annika. « A Study on Selected Hot-Metal and Slag Components for Improved Blast Furnace Control ». Licentiate thesis, KTH, Materials Science and Engineering, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1674.
Texte intégralThe main objective of this work was to gain an increasedunderstanding of selected blast furnace phenomena which couldbe utilized for an improved blast furnace process control. Thisthesis contributes with both a model study and an experimentalstudy on blast furnace tapping, and results from these findingscan be used to enhance the control of the blast furnace.
The work was divided in two parts. The first part dealt witha model study for optimisation of the blast furnace burdencalculation. During the second part the frequency of thehot-metal and slag sampling was increased compared to routinesampling throughout the taps of a commercial blast furnace.Thereafter, composition variation and correlation betweendistribution coefficients were examined.
With an optimisation of the burden calculation the firststep towards controlled hot-metal production is taken, sincethe optimal material mixture for a desired hot-metalcomposition could easily be found. Due to the fact that theoptimisation model uses yield factors, which are easy tocalculate from material and hot-metal compositions, thesevalues have to be accurate for a controlled process control ofthe furnace. The study of hot-metal and slag compositionsduring tapping concluded that variations exist. The largevariations for C, Si, S, Mn and V in hot metal during tappinglead to the conclusion, that one single sampling ofhot metalwas not enough to get a representative value for thecomposition. The solution was to use a double-samplingpractise, were the hot metal was sampled first after tap startand secondly short after slag start, and subsequently anaverage composition value was calculated. The following studywas on the elemental distribution between hot metal and slagfrom a thermodynamic point of view. The major conclusion fromthis study was that the distribution coefficients behaved asexpected when looking at the equilibrium reactions. The studiedslag-metal distributions were also showing strong, trend-likerelationships, which was not affected by the operational statusof the blast furnace during the studied sampling period.
The overall conclusion is that with a more reliablecomposition of hot metal and slag from the taps, thedistribution coefficients could be calculated with betterprecision and hence, the yield factors for the optimisationmodel would be more accurate. This procedure would probablylead to a more reliable burden optimisation and a thereforebetter and more stable blast furnace control.
Topbas, Selim. « Effect Of Trass, Granulated Blast Furnace Slag And Fly Ash On Delayed Ettringite Formation ». Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612494/index.pdf.
Texte intégralLivres sur le sujet "Blast furnace slag (BFS)"
Wilding, C. R. The hydration of blast furnace slag cements. Oxfordshire, OX : Materials Development Division, Harwell Laboratory, 1986.
Trouver le texte intégralACI Committee 226., dir. Ground granulated blast-furnace slag as a cementitious constituent in concrete. Detroit (P.O. Box 19150, Detroit 48219) : American Concrete Institute, 1988.
Trouver le texte intégralLv, Xuewei, et Zhiming Yan. High Temperature Physicochemical Properties of High Alumina Blast Furnace Slag. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3288-5.
Texte intégralAnnamraju, Gopal. Air pollution impacts when quenching blast furnace slag with contaminated water. Research Triangle Park, NC : U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1987.
Trouver le texte intégralACI Committee 226., dir. Ground granulated blast-furnace slag as a cementitious constituent in concrete. Detroit : American Concrete Institute, 1987.
Trouver le texte intégralS, Rogers P., dir. Ceramic materials from molten blast-furnace slag by direct controlled cooling. Luxembourg : Commission of the European Communities, 1986.
Trouver le texte intégralReeves, C. M. The use of ground granulated blast furnace slag to produce durable concrete. [London] : Telford, 1985.
Trouver le texte intégralB, Seymour J., Lane W. L et Spokane Research Center (United States. Dept. of Energy), dir. Material properties of retested specimens composed of tailings, cement, and blast-furnace slag. [Spokane, Wash.] : U.S. Dept. of Energy, Spokane Research Center, 1996.
Trouver le texte intégralWoodley, Nancy Karen Fish. An investigation of landfill disposal of blast furnace slag from secondary lead smelters. Ann Arbor, MI : University Microfilms International, 1991.
Trouver le texte intégralGakkai, Nihon Kenchiku. Kōro semento o shiyōsuru konkurīto no chōgō sekkei, sekō shishin, dō kaisetsu : Recommendation for practice of concrete with Portland blast-furnace slag cement. 8e éd. Tōkyō : Nihon Kenchiku Gakkai, 2001.
Trouver le texte intégralChapitres de livres sur le sujet "Blast furnace slag (BFS)"
Ramezanianpour, Ali Akbar. « Granulated Blast Furnace Slag ». Dans Springer Geochemistry/Mineralogy, 157–91. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36721-2_3.
Texte intégralMatthes, Winnie, Anya Vollpracht, Yury Villagrán, Siham Kamali-Bernard, Doug Hooton, Elke Gruyaert, Marios Soutsos et Nele De Belie. « Ground Granulated Blast-Furnace Slag ». Dans RILEM State-of-the-Art Reports, 1–53. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-70606-1_1.
Texte intégralSiddique, Rafat, et Mohammad Iqbal Khan. « Ground Granulated Blast Furnace Slag ». Dans Supplementary Cementing Materials, 121–73. Berlin, Heidelberg : Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17866-5_3.
Texte intégralIsmail, Ahmad Abdul Mun’im, Muhammad Rafiq Haikal Rosdin, Alya Naili Rozhan, Hadi Purwanto, Abd Malek Abdul Hamid, Muhamad Faiz Md Din, Mohd Fairus Mohd Yasin et Mohd Hanafi Ani. « Blast Furnace Slag Cement Clinker Production Using Limestone-Hot Blast Furnace Slag Mixture ». Dans Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 539–45. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9509-5_71.
Texte intégralLv, Xuewei, et Zhiming Yan. « Slag Structure of High Alumina Blast Furnace Slag ». Dans High Temperature Physicochemical Properties of High Alumina Blast Furnace Slag, 43–76. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3288-5_3.
Texte intégralKeng, Wu, et Xu Kuangdi. « Slag-Forming in Blast Furnace Ironmaking ». Dans The ECPH Encyclopedia of Mining and Metallurgy, 1–2. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-0740-1_994-1.
Texte intégralBazhenova, S. I., et Dien Vu Kim. « Effect of Plasma Blast Furnace Slag Treatment on Properties of Blast Furnace Slag-Cement Mortar ». Dans Lecture Notes in Civil Engineering, 199–205. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20459-3_25.
Texte intégralLiu, Jie, Dongming Zhao, Qiang Zhong, Hui Zhang, Libing Xv et Jin Xun. « Reducing MgO Content of Blast Furnace Slag ». Dans The Minerals, Metals & ; Materials Series, 653–61. Cham : Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-50304-7_63.
Texte intégralWang, Hua, Guibao Qiu, Qingyu Deng et Shiwei Ma. « Viscosity Evolution of Blast Furnace Slag Bearing Titanium ». Dans 3rd International Symposium on High-Temperature Metallurgical Processing, 137–44. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118364987.ch17.
Texte intégralMeilong, Hu, Qu Zhengfeng, LV Xuewei et Gan Yunhua. « Precipitation Behavior of Titanium Bearing Blast Furnace Slag ». Dans Advances in Molten Slags, Fluxes, and Salts : Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016, 1261–70. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48769-4_136.
Texte intégralActes de conférences sur le sujet "Blast furnace slag (BFS)"
V., Aswani, Shobha Elizabeth Thomas et Ramaswamy K. P. « Effect of Admixtures in Blast Furnace Slag-fly Ash Based Alkali-activated Paste ». Dans 6th International Conference on Modeling and Simulation in Civil Engineering. AIJR Publisher, 2023. http://dx.doi.org/10.21467/proceedings.156.29.
Texte intégralAshwathi, R. « Investigation on Strength Properties of Concrete using Steel Slag as a Partial Replacement for Fine Aggregate ». Dans Sustainable Materials and Smart Practices. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901953-44.
Texte intégralMeguro, Yoshihiro, Yoshimi Kawato, Takuya Nakayama, Osamu Tomioka et Motoyuki Mitsuda. « Elution Behavior of Heavy Metals From Cement Solidified Products of Incinerated Ash Waste ». Dans ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2011. http://dx.doi.org/10.1115/icem2011-59102.
Texte intégralSharp, J. H., J. Hill, N. B. Milestone et E. W. Miller. « Cementitious Systems for Encapsualation of Intermediate Level Waste ». Dans ASME 2003 9th International Conference on Radioactive Waste Management and Environmental Remediation. ASMEDC, 2003. http://dx.doi.org/10.1115/icem2003-4554.
Texte intégralSpasova, L. M., M. I. Ojovan, M. Hayes et H. Godfrey. « Acoustic Emission Monitoring of Cement-Based Structures Immobilising Radioactive Waste ». Dans The 11th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2007. http://dx.doi.org/10.1115/icem2007-7049.
Texte intégralOwada, Hitoshi, Tomoko Ishii, Mayumi Takazawa, Hiroyasu Kato, Hiroyuki Sakamoto et Masahito Shibata. « Modeling of Alteration Behavior on Blended Cementitious Materials ». Dans ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2011. http://dx.doi.org/10.1115/icem2011-59096.
Texte intégralHagan, M., R. M. Cornell, B. Riley et B. Ware. « Operational Experience With a Commercial Plant for Stabilisation of Radioactive Sludge and Other Materials in the United Kingdom ». Dans ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2009. http://dx.doi.org/10.1115/icem2009-16042.
Texte intégralStepanenko, D. O. « Blast furnace slag used in slag-forming materials for the ladle furnace process ». Dans MININGMETALTECH 2023 – THE MINING AND METALS SECTOR : INTEGRATION OF BUSINESS, TECHNOLOGY AND EDUCATION. Volume 1. Baltija Publishing, 2023. http://dx.doi.org/10.30525/978-9934-26-361-3-37.
Texte intégralOVČAČÍKOVÁ, Hana, Marek VELIČKA, Petra MAIEROVÁ, Jozef VLČEK et Jitka HALAMOVÁ. « EXPERIMENTAL STUDIES OF GRANULATED BLAST FURNACE SLAG ». Dans METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3450.
Texte intégralKumar, Rohit, et Mayengbam Sunil Singh. « Effect of blast-furnace slag on geopolymer paste ». Dans CONTEMPORARY INNOVATIONS IN ENGINEERING AND MANAGEMENT. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0158575.
Texte intégralRapports d'organisations sur le sujet "Blast furnace slag (BFS)"
McDaniel, E. (Immobilization of technetium in blast furnace slag). Office of Scientific and Technical Information (OSTI), novembre 1989. http://dx.doi.org/10.2172/5385009.
Texte intégralWang, Tianqi, Maryam Salehi et Andrew J. Whelton. Blast Furnace Slag Usage and Guidance for Indiana. Purdue University, août 2018. http://dx.doi.org/10.5703/1288284316647.
Texte intégralTrivelpiece, Cory, et Madison Hsieh. Blast furnace slag reactions in various solutions (Interim Report). Office of Scientific and Technical Information (OSTI), mars 2021. http://dx.doi.org/10.2172/1784919.
Texte intégralBanks, M., A. Schwab et James Alleman. Constructed Wetlands for the Remediation of Blast Furnace Slag Leachates. West Lafayette, IN : Purdue University, 2006. http://dx.doi.org/10.5703/1288284313362.
Texte intégralMalhotra, V. M. Mechanical properties and freezing and thawing durability of concrete incorporating a ground granulated blast-furnace slag. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1988. http://dx.doi.org/10.4095/307077.
Texte intégralLomboy, Gilson, Douglas Cleary, Seth Wagner, Yusef Mehta, Danielle Kennedy, Benjamin Watts, Peter Bly et Jared Oren. Long-term performance of sustainable pavements using ternary blended concrete with recycled aggregates. Engineer Research and Development Center (U.S.), mai 2021. http://dx.doi.org/10.21079/11681/40780.
Texte intégral