Littérature scientifique sur le sujet « BLANK HOLDING FORCE »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « BLANK HOLDING FORCE ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "BLANK HOLDING FORCE"
Thiruvarudchelvan, S., et W. G. Lewis. « Deep Drawing With Blank Holder Force Approximately Proportional to the Punch Force ». Journal of Engineering for Industry 112, no 3 (1 août 1990) : 278–85. http://dx.doi.org/10.1115/1.2899587.
Texte intégralShan, Ti Kun, et Li Liu. « Springback of TRIP Steels under Varying Blank Holder Force ». Key Engineering Materials 561 (juillet 2013) : 620–25. http://dx.doi.org/10.4028/www.scientific.net/kem.561.620.
Texte intégralTan, Chin Joo, et Afshin Aslian. « FE simulation study of deep drawing process of SUS304 cups having no delayed cracks under enhanced blank holding force ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture 234, no 1-2 (15 juin 2019) : 84–94. http://dx.doi.org/10.1177/0954405419855230.
Texte intégralHe, Sijun, Xin Wu et S. Jack Hu. « Formability Enhancement for Tailor-Welded Blanks Using Blank Holding Force Control ». Journal of Manufacturing Science and Engineering 125, no 3 (23 juillet 2003) : 461–67. http://dx.doi.org/10.1115/1.1580853.
Texte intégralQian, Jian Qing, Ji Ping Chen et Hai Fan Qian. « The Influence of N Values on Sheet Metal Deep Drawing Based on Different Blank Holder Forces ». Advanced Materials Research 418-420 (décembre 2011) : 1364–67. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.1364.
Texte intégralKe, Jun Yi, Yu Qi Liu, Gui Li et Ting Du. « Springback Experimental Research of Advanced High-Strength Steel ». Advanced Materials Research 842 (novembre 2013) : 284–88. http://dx.doi.org/10.4028/www.scientific.net/amr.842.284.
Texte intégralYoon, Hyung Sop, Sergei Alexandrov, Kwan Soo Chung, Robert E. Dick et T. J. Kang. « Prediction of Critical Blank-Holding Force Criterion to Prevent Wrinkles in Axi-Symmetric Cup Drawing ». Materials Science Forum 505-507 (janvier 2006) : 1273–78. http://dx.doi.org/10.4028/www.scientific.net/msf.505-507.1273.
Texte intégralVenkateshwar Reddy, P., S. Hari Prasad, Perumalla Janaki Ramulu, Sirish Battacharya et Daya Sindhu Guptha. « Effect of Geometries of Die/Blank Holder and Punch Radii in Angular Deep-Drawing Dies on DP Steel Formability ». Applied Mechanics and Materials 813-814 (novembre 2015) : 269–73. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.269.
Texte intégralSeo, Hyung Yoon, Chul Kyu Jin et Chung Gil Kang. « Effect on Blank Holding Force on Blank Deformation at Direct and Indirect Hot Deep Drawings of Boron Steel Sheets ». Metals 8, no 8 (25 juillet 2018) : 574. http://dx.doi.org/10.3390/met8080574.
Texte intégralWang, Guang Kai, Si Yuan Cheng, Su Yang Li et Xiang Wei Zhang. « Application of Numerical Simulation in Stamping Process of Complex Box-Type Parts ». Advanced Materials Research 291-294 (juillet 2011) : 579–84. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.579.
Texte intégralThèses sur le sujet "BLANK HOLDING FORCE"
Chen, Chien-Tsu, et 陳建志. « Finite Element Analysis of the Blank Holding Force Control andFormability in Deep Drawing Process ». Thesis, 2001. http://ndltd.ncl.edu.tw/handle/31426419197306470468.
Texte intégral國立雲林科技大學
機械工程系碩士班
89
The two most common defects encountered in sheet metal forming are the tearing and wrinkling of workpiece. An excessively high force imposed by the blank holder will induce tearing on the side-wall while an insufficient holding force will cause wrinkling in the flange area. A holding force that varies with the punch stroke is therefore to suggested to effectively delay or prevent the product from failures, by predicting the onset of tearing or wrinkling and adjusting the holding force based an adequate algorithm. In this thesis, three modes of holding force control are proposed: mode of force-difference, mode of force-ratio, and the mode of pulsating-force. All the control modes are integrated with the explicit non-linear finite element code, LS-DYNA, in the simulation of the deep drawing of square cups. The numerical results regarding the evaluation of product quality, such as the uniformity of wall thickness and the height of wrinkling in the flange are observed. It is found that both the modes of force-difference and force-ratio can successfully suppress the occurrence of tearing and wrinkling. However, though being a much simpler controlling method, the pulsating-force mode shows different optimum frequency and amplitude of the force pulsation, according to the objective of force control, say, the uniformity of thickness, the formability of cup height, or the minimum spring —back of cup wall.
Yang, Tzyy-Chang, et 楊梓群. « A Study on the Servo Control of Blank Holding Force in Sheet Metal Forming Processes ». Thesis, 2000. http://ndltd.ncl.edu.tw/handle/45467929469139158452.
Texte intégral國立雲林科技大學
機械工程技術研究所
88
During sheet metal forming process, an appropriate clamping force is usually needed in order to effectively suppress wrinkles caused by circumferential force on the blank. An excessively high blank holding force (BHF) will generally incur cup wall tearing, whereas too low a BHF is not capable of preventing wrinkles. An ideal BHF should be variable, it should be reduced when the wall thickness is below safety, and be elevated when wrinkles occur. In this study, a newly developed photoelectric displacement sensor (PDS) was used to directly measure the displacement on shoulder corner of the die. The change in wall thickness was calculated which then serve as a controlling parameter of wall tearing. Another PDS was placed on flange area to measure the height of the flange. The change in flange height was also calculated as a controlling parameter of wrinkles. A hydraulic PID servo controller in a microcomputer was used to control pressure output. The displacement measured in PDS was process by PID controller, which then feedback to a proportional hydraulic valve. A suitable real-time clamping force was applied according to the control criteria. In order to effectively prevent flange wrinkles and wall tearing during sheet metal forming process, appropriate criteria are needed to timely control holding force, so that a fluent plastic flow between punch and die as well as better forming depth are acquired. In this thesis, two sets of criteria are developed, namely, the criteria of tearing thickness and the tearing-wrinkle controlling criteria. The influences of these criteria on correcting parameters and the initial clamping area are also discussed. The terminal goal of this study is to reach an optimized forming height and cup wall thickness, to effectively control formability of sheet metal, and to reduce the cost as well as time during design and manufacturing processes.
KUMAR, SUNIL. « SELECTION OF MATERIAL FOR DEEP DRAWING OF A FUEL TANK AND ITS FINITE ELEMENT SIMULATION ». Thesis, 2017. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15902.
Texte intégralLivres sur le sujet "BLANK HOLDING FORCE"
The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL1100 Materials at Constant Blank Holding Force using on Finite Element Simulation Studies. Tiruchengode, India : ASDF International, 2017.
Trouver le texte intégralBoard Jr., Marcus. Invisible Weapons. Oxford University PressNew York, 2022. http://dx.doi.org/10.1093/oso/9780197605226.001.0001.
Texte intégralChapitres de livres sur le sujet "BLANK HOLDING FORCE"
Yoon, Hyung Sop, Sergei Alexandrov, Kwan Soo Chung, Robert E. Dick et T. J. Kang. « Prediction of Critical Blank-Holding Force Criterion to Prevent Wrinkles in Axi-Symmetric Cup Drawing ». Dans Materials Science Forum, 1273–78. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-990-3.1273.
Texte intégralManabe, K., H. Nishimura et H. Hamano. « An Improvement in Deep Drawability of Steel/Plastic Laminate Sheets by Control of Blank Holding Force ». Dans Advanced Technology of Plasticity 1987, 1297–304. Berlin, Heidelberg : Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-662-11046-1_78.
Texte intégralSiraji, Amirela, Tsegaye Bekele, Perumalla Janaki Ramulu, Habtamu Beri et P. Venkateswar Reddy. « Investigation of the Effect of Blank Holding Force on Earing Defect During Circular Deep Drawing Process Through Finite Element Analysis and Experimentation Using AA6061 and Low-Carbon Steel Sheets ». Dans The Minerals, Metals & ; Materials Series, 219–29. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-06212-4_20.
Texte intégralPugh, Jonathan, et David Chandler. « Storiation : Holding the World ». Dans Anthropocene Islands : Entangled Worlds, 141–78. University of Westminster Press, 2021. http://dx.doi.org/10.16997/book52.e.
Texte intégralJackson, Alicia K. « Promised Land ». Dans The Recovered Life of Isaac Anderson, 114–29. University Press of Mississippi, 2021. http://dx.doi.org/10.14325/mississippi/9781496835147.003.0008.
Texte intégralHess, Earl J. « They Are upon Us ». Dans Storming Vicksburg, 1–14. University of North Carolina Press, 2020. http://dx.doi.org/10.5149/northcarolina/9781469660172.003.0001.
Texte intégralGellman, David N. « A Conservative on the Inside ». Dans Liberty's Chain, 189–213. Cornell University Press, 2022. http://dx.doi.org/10.7591/cornell/9781501715846.003.0009.
Texte intégral« The little orange tree grew ». Dans Stirring the Pot of Haitian History, sous la direction de Mariana Past et Benjamin Hebblethwaite, 75–118. Liverpool University Press, 2021. http://dx.doi.org/10.3828/liverpool/9781800859678.003.0006.
Texte intégralActes de conférences sur le sujet "BLANK HOLDING FORCE"
He, Sijun, Xin Wu et S. Jack Hu. « Formability Enhancement for Tailor-Welded Blanks Using Blank Holding Force Control ». Dans ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/med-23327.
Texte intégralLi, Hao, Qiang Wang et Fang He. « Optimization of Variable Blank Holder Force for Electromagnetic Blank Holding Technology ». Dans 2019 Chinese Control Conference (CCC). IEEE, 2019. http://dx.doi.org/10.23919/chicc.2019.8865083.
Texte intégralHishida, Yuji, et Robert H. Wagoner. « Experimental Analysis of Blank Holding Force Control in Sheet Forming ». Dans International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1993. http://dx.doi.org/10.4271/930285.
Texte intégralMishra, Nemisha, Dilip Sutariya et K. Narasimhan. « Influence of Variable Blank Holding Force on the Drawing Behavior of Steel Sheets ». Dans THE 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011). AIP, 2011. http://dx.doi.org/10.1063/1.3623701.
Texte intégralChen, L. « Controlled FEM simulation ways of blank holding force in sheet metal forming process ». Dans NUMISHEET 2005 : Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process. AIP, 2005. http://dx.doi.org/10.1063/1.2011205.
Texte intégralNiancong Liu et Fang Fang. « Effects of property parameters and blank holding force on the deformability of sheet metal in deep drawing ». Dans 2011 Second International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2011. http://dx.doi.org/10.1109/mace.2011.5986909.
Texte intégralWang, Wu-Rong, et Guan-Long Chen. « The Optimization of Variable Blank Holder Force for Sheet Metal Stamping ». Dans ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21020.
Texte intégralTseng, Huang-Chi, Zong-Chun Wu, Chinghua Hung et Ming-Hu Lee. « Investigation on Sheet Hydroforming Process of Titanium/Aluminum Clad Metal Housing ». Dans ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34047.
Texte intégralYoshihara, S., A. Takahashi, M. Saito, B. J. MacDonald et K. Manabe. « Development of Fuzzy Inference System With Learning Algorithm for Determining Press-Forming Conditions ». Dans ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34020.
Texte intégralGarde, Shubham, Ranveer Patil, Tyler Grimm et Laine Mears. « Electrically Assisted Stamping ». Dans ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-96916.
Texte intégral