Littérature scientifique sur le sujet « Bioplatics »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Bioplatics ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Bioplatics"
Srisang, Naruebodee, et Siriwan Srisang. « Strength, Durability and Degradation Properties of Bioplates Produced from Durian Seed Mixed with Poly(Lactic Acid) ». Key Engineering Materials 858 (août 2020) : 157–62. http://dx.doi.org/10.4028/www.scientific.net/kem.858.157.
Texte intégralBendale, Yogesh, Vikram Gota, Rajnish Nagarkar, Eeshani Bendale, Nandinee Khot, Surendra Nagre et Avinash Kadam. « Abstract CT169 : Bioplatin (NTPX-07) as an oral nano platinum in patients of advanced stage malignancy : Outcomes of a phase I clinical trial ». Cancer Research 83, no 8_Supplement (14 avril 2023) : CT169. http://dx.doi.org/10.1158/1538-7445.am2023-ct169.
Texte intégralGlazunova, Irina V., Svetlana A. Sokolova et Valery M. Yashin. « The assimilation ability of the elements of reclaimed agricultural landscapes for constructed wetland creation ». Land Reclamation and Hydraulic Engineering 14, no 2 (2024) : 108–27. http://dx.doi.org/10.31774/2712-9357-2024-14-2-108-127.
Texte intégralChao, Yeong-Nan, Jui-Hsien Lin, Kok-Kwang Ng, Chung-Hsin Wu, Pui-Kwan Andy Hong et Cheng-Fang Lin. « Improving total nitrogen removal in aeration basin retrofitted with entrapped biomass ». Water Science and Technology 69, no 7 (4 février 2014) : 1558–64. http://dx.doi.org/10.2166/wst.2014.053.
Texte intégralBendale, Y. « Green synthesis, characterization and anticancer potential of platinum nanoparticles Bioplatin ». Journal of Chinese Integrative Medicine 10, no 6 (15 juin 2012) : 681–89. http://dx.doi.org/10.3736/jcim20120613.
Texte intégralOgbonna, James Chukwuma, Yoshifumi Amano, Kazuo Nakamura, Koki Yokotsuka, Yoshimi Shimazu, Masahira Watanabe et Shodo Hara. « A Multistage Bioreactor with Replaceable Bioplates for Continuous Wine Fermentation ». American Journal of Enology and Viticulture 40, no 4 (1989) : 292–98. http://dx.doi.org/10.5344/ajev.1989.40.4.292.
Texte intégralChen, Haon-Yao, Pui-Kwan Andy Hong, Ping-Yi Yang, Kok Kwang Ng, Sheng-Fu Yang, Chien-Hsien Lee et Cheng-Fang Lin. « A pilot study on suspended activated sludge process augmented with immobilized biomass for simultaneous nitrification and denitrification ». Journal of Water Reuse and Desalination 5, no 2 (4 février 2015) : 157–65. http://dx.doi.org/10.2166/wrd.2015.087.
Texte intégralZarochentseva, N. V., V. I. Krasnopolskiy, О. А. Misyukevich, I. V. Barinova, М. V. Mgeliashvili et О. V. Rovinskaya. « Rare forms of vaginal diseases in women after panhysterectomy ». Voprosy ginekologii, akušerstva i perinatologii 19, no 5 (2020) : 150–55. http://dx.doi.org/10.20953/1726-1678-2020-5-150-155.
Texte intégralSurahman, Endang, Vita Meylani et Lucky Radi Rinandiyana. « Karang Taruna Fajar : Cinderamata Bioplastik Khas Pantai Madasari, Masawah ». CARADDE : Jurnal Pengabdian Kepada Masyarakat 1, no 2 (23 janvier 2019) : 131–35. http://dx.doi.org/10.31960/caradde.v1i2.34.
Texte intégralNagato, Keisuke, Yuki Yajima et Masayuki Nakao. « Laser-Assisted Thermal Imprinting of Microlens Arrays—Effects of Pressing Pressure and Pattern Size ». Materials 12, no 4 (25 février 2019) : 675. http://dx.doi.org/10.3390/ma12040675.
Texte intégralThèses sur le sujet "Bioplatics"
Cazaudehore, Guillaume. « Méthanisation des plastiques biodégradables : performances et diversité microbienne ». Electronic Thesis or Diss., Pau, 2022. http://www.theses.fr/2022PAUU3002.
Texte intégralGrowing concern regarding non-biodegradable plastics and the impact of these materials on the environment has promoted interest in biodegradable plastics. Biodegradable plastics offer additional waste management options (e.g., anaerobic digestion or composting) over conventional plastics. However, the treatment of biodegradable plastics under anaerobic digestion is only in its infancy. Therefore, the aim of this thesis was to investigate the fate of biodegradable plastics in anaerobic digestion systems and the microorganisms involved in the plastic conversion to methane.For this purpose, batch anaerobic digestion experiments were performed on the main biodegradable polymers and on three commercial blends of biodegradable polymer, under both mesophilic and thermophilic conditions. Only Poly(3-hydroxybutyrate) (PHB) and Thermoplastic starch (TPS) exhibited rapid (25-50 days) and important (57-80.3% and 80.2-82.6%, respectively) conversion to methane under both mesophilic and thermophilic condition. Methane production rates from poly(lactic acid) (PLA) was very low under mesophilic condition, to such an extent that 500 days were required to reach the ultimate methane production, corresponding to a PLA conversion to methane of 74.7-80.3%. Methane production rate from PLA was greatly enhanced under thermophilic condition since only 60 to 100 days were required to reach the same ultimate methane production. Lactate-utilizing bacteria such as Tepidimicrobium, Moorella and Tepidanaerobacter were revealed to be important during the thermophilic digestion of PLA. Similarly, starch-degrading bacteria (from Clostridium genus) were highlighted during TPS digestion at 38 °C and 58°C. Previously known PHB degraders (i.e., Enterobacter, Ilyobacter delafieldii and Cupriavidus) were observed during mesophilic and thermophilic AD of PHB. The low biodegradation rate of most of the biodegradable plastics in mesophilic anaerobic digesters is a major hindrance to their introduction at industrial scale. Thermal (at 120 or 150 °C) and thermo-alkaline (at 70°C or 90 °C with calcium hydroxide addition) pretreatments were successfully implemented on PLA. These strategies were tested on PLA, which is one of the main biodegradable polymer, accounting for 25% of the biodegradable plastic production. PLA pretreated with these treatments, achieved biodegradation yield of 73% after 15-20 days; a similar biodegradation yield was obtained after 500 days for untreated PLA.PHB and PLA are among the most studied polymer to replace conventional plastics. Finally, the stability and performances of the co-digestion of these plastics (with and without PLA pretreatment) with food wastes fed semi-continuously under mesophilic conditions was investigated. The addition of biodegradable plastics resulted in a more stable process (in comparison with stand-alone biowastes reactor) and no negative effects could be detected. PHB was estimated to be fully biodegraded in the reactors. By contrast, PLA was accumulating in the reactor, and an average biodegradation of 47.6% was estimated during the third hydraulic retention time. Thermo-alkaline pretreatment of PLA improved the biodegradation yield of PLA to 77.5%. The identification of specific microorganisms implicated in the biodegradable plastic degradation was complicated; the majority of the microorganisms correlated with the methane production from reactors co-digesting PLA and PHB were implicated in the anaerobic digestion of the biowaste, which can be explained by the low proportion of biodegradable plastics introduced
Actes de conférences sur le sujet "Bioplatics"
Castro, Jorge Manrique, Isaac Johnson et Swaminathan Rajaraman. « Microfabrication and Characterization of Micro-Stereolithographically 3d Printed, and Double Metallized Bioplates with 3D Microelectrode Arrays for In-Vitro Analysis of Cardiac Organoids ». Dans 2023 IEEE 36th International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2023. http://dx.doi.org/10.1109/mems49605.2023.10052547.
Texte intégral