Littérature scientifique sur le sujet « Bio-ink »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Bio-ink ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Bio-ink"
Lee, Su Jeong, Jun Hee Lee, Jisun Park, Wan Doo Kim et Su A. Park. « Fabrication of 3D Printing Scaffold with Porcine Skin Decellularized Bio-Ink for Soft Tissue Engineering ». Materials 13, no 16 (10 août 2020) : 3522. http://dx.doi.org/10.3390/ma13163522.
Texte intégralKim, Ji Seon, Soyoung Hong et Changmo Hwang. « Bio-ink Materials for 3D Bio-printing ». Journal of International Society for Simulation Surgery 3, no 2 (10 décembre 2016) : 49–59. http://dx.doi.org/10.18204/jissis.2016.3.2.049.
Texte intégralJeong, Wonwoo, Min Kyeong Kim et Hyun-Wook Kang. « Effect of detergent type on the performance of liver decellularized extracellular matrix-based bio-inks ». Journal of Tissue Engineering 12 (janvier 2021) : 204173142199709. http://dx.doi.org/10.1177/2041731421997091.
Texte intégralHan, Jonghyeuk, Wonwoo Jeong, Min-Kyeong Kim, Sang-Hyeon Nam, Eui-Kyun Park et Hyun-Wook Kang. « Demineralized Dentin Matrix Particle-Based Bio-Ink for Patient-Specific Shaped 3D Dental Tissue Regeneration ». Polymers 13, no 8 (15 avril 2021) : 1294. http://dx.doi.org/10.3390/polym13081294.
Texte intégralLee, Su Jeong, Ji Min Seok, Jun Hee Lee, Jaejong Lee, Wan Doo Kim et Su A. Park. « Three-Dimensional Printable Hydrogel Using a Hyaluronic Acid/Sodium Alginate Bio-Ink ». Polymers 13, no 5 (5 mars 2021) : 794. http://dx.doi.org/10.3390/polym13050794.
Texte intégralSultan, Md Tipu, Ok Joo Lee, Joong Seob Lee et Chan Hum Park. « Three-Dimensional Digital Light-Processing Bioprinting Using Silk Fibroin-Based Bio-Ink : Recent Advancements in Biomedical Applications ». Biomedicines 10, no 12 (12 décembre 2022) : 3224. http://dx.doi.org/10.3390/biomedicines10123224.
Texte intégralHsieh, Yi-Chieh, Han-Yi Wang, Kuang-Chih Tso, Chung-Kai Chang, Chi-Shih Chen, Yu-Ting Cheng et Pu-Wei Wu. « Development of IrO2 bio-ink for ink-jet printing application ». Ceramics International 45, no 13 (septembre 2019) : 16645–50. http://dx.doi.org/10.1016/j.ceramint.2019.05.206.
Texte intégralNeufurth, Meik, Shunfeng Wang, Heinz C. Schröder, Bilal Al-Nawas, Xiaohong Wang et Werner E. G. Müller. « 3D bioprinting of tissue units with mesenchymal stem cells, retaining their proliferative and differentiating potential, in polyphosphate-containing bio-ink ». Biofabrication 14, no 1 (31 décembre 2021) : 015016. http://dx.doi.org/10.1088/1758-5090/ac3f29.
Texte intégralYang, Wei, Anqianyi Tu, Yuchen Ma, Zhanming Li, Jie Xu, Min Lin, Kailong Zhang et al. « Chitosan and Whey Protein Bio-Inks for 3D and 4D Printing Applications with Particular Focus on Food Industry ». Molecules 27, no 1 (28 décembre 2021) : 173. http://dx.doi.org/10.3390/molecules27010173.
Texte intégralHabib, Md Ahasan, et Bashir Khoda. « Rheological analysis of bio-ink for 3D bio-printing processes ». Journal of Manufacturing Processes 76 (avril 2022) : 708–18. http://dx.doi.org/10.1016/j.jmapro.2022.02.048.
Texte intégralThèses sur le sujet "Bio-ink"
Habib, MD Ahasan. « Designing Bio-Ink for Extrusion Based Bio-Printing Process ». Diss., North Dakota State University, 2019. https://hdl.handle.net/10365/32045.
Texte intégralBARONE, CRISTIANA. « Sox2-dependent molecular functions in the transcriptional controlof glioma and normal neural stem cells ». Doctoral thesis, Università degli Studi di Milano-Bicocca, 2021. http://hdl.handle.net/10281/304785.
Texte intégralCancer Stem Cells (CSCs) are a tumor cell sub-population with stem-cell features, i.e. self- renewal (ability to re-form a tumor of the same type) and the ability to “differentiate” into cells constituting the tumor bulk. These hallmarks make them responsible for events such as tumor relapse, metastasis and drug resistance. For this reason it is very important to understand which are the «factors» fundamental for their maintenance. Interestingly, the same transcription factors may be responsible of the maintenance of both normal stem cells and cancer stem cells. In particular we know that the “stemness” transcription factor Sox2, a major regulator in neural stem cells, is also overexpressed in brain tumors. In gliomas, Sox2 is essential to maintain CSC. In mouse high-grade glioma pHGG, Sox2 deletion causes cell proliferation arrest and inability to reform tumors in vivo; 134 genes are significantly derepressed. To identify genes mediating the effects of Sox2 deletion, I overexpressed into pHGG cells nine among the most derepressed genes, and identified four genes, Cdkn2b, Ebf1, Zfp423 and Hey2, that strongly reduced cell proliferation in vitro and brain tumorigenesis in vivo. By CRISPR/Cas9 mutagenesis, or pharmacological inactivation, of each of these genes, individually, I showed that their activity is essential for the proliferation arrest caused by Sox2 deletion. These Sox2-inhibited antioncogenes also inhibited clonogenicity in primary human glioblastoma-derived cancer stem-like cell lines. These experiments identify critical anti-oncogenic factors whose inhibition by Sox2 is involved in CSC maintenance, defining new potential therapeutic targets for gliomas (Barone et al, Glia, under revision; Barone et al, 2018). Further to this work, constituting the main part of my thesis work, I contributed to understand Sox2 function in normal, brain-derived neural stem cells. Here, genome-wide studies (ChIA- PET; ChIPseq; RNAseq) led us to understand that Sox2 acts in gene regulation, at the genome- wide level, by maintaining and regulating a genome-wide network of long-range interactions in chromatin, connecting gene promoters to distant enhancers (Bertolini et al, 2019). This new perspective on Sox2 molecular function allowed us to identify novel Sox2-regulated genes, by identifying SOX2 binding to distant enhancers (ChIPseq), enabling us to understand which gene these enhancers control, through our long-range interaction maps (ChIA-PET and RNAseq data). This led us to identify important new downstream mediators of Sox2 function in neural stem cell self-renewal (Pagin et al, under revision).
LAURANO, ROSSELLA. « Stimuli-responsive poly(ether urethane) hydrogels for the design of smart patient-specific patches in skin wound treatment ». Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2839841.
Texte intégralHartleb, Carina. « Creation and Evaluation of Solid Optical Tissue Phantoms for Bio-Medical Optics Applications ». Thesis, Linköping University, Department of Biomedical Engineering, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-3607.
Texte intégralBecause of their compatibility and precise results bio-optical methods based on measurements of the optical tissue properties gain importance in non-invasive medical therapy and diagnostic. For development and standardization of medical devices optical phantoms are suitable. The present report handles the creation and evaluation of solid tissue phantoms, made up of Agar, Vasolipid and ink utilizing different mixture ratios. After cutting the models in slices of 0.2 to 1.1 mm thickness the absorption- and scattering coefficient were measured using a collimated laser beam setup. As result of the study a formula for the preparation of solid optical tissue phantoms with desired optical properties was found, that is valid for models containing 1.12 % Agar.
Wun-HongLiang et 梁文紘. « Bio-sample Detection on Paper-based Devices Using Ink-jet Printers ». Thesis, 2014. http://ndltd.ncl.edu.tw/handle/08041723150921597977.
Texte intégral國立成功大學
工程科學系
102
This study successfully improved the home printer for the spraying of biochemical reagents in paper-based chip production. General biochemistry laboratories use pipettes to introduce the required reagent into paper-based chips. One-piece operation is carried out manually, which is a time-consuming process if the devices are produced in large quantities. The use of automatic production saves time; however, such equipment comes at a high cost. Thus, in order to achieve low-cost mass production, this study attempts to improve the low-cost piezoelectric jet head printer that sprays biochemical reagents into paper-based chips. The following are the advantages of using the printer: low cost, ease of operation, high speed, precise, reproducible and applicable to large scale production. A 2D chip design was employed to simplify the manufacturing process, and the chips were applied to real AST(GOT) and ALT(GPT) testing. The colorimetric method utilizes video equipment to capture images, averages the intensities of the colors and digitizes the information. It then generates a standard curve based on statistical data. The experimental results suggest that the best observation time for AST detection within the 0–105 U/liter concentration range is four min; the linear distribution of the standard curve established based on changes in color is R2 = 0.982. For ALT detection, the optimal observation time within the 0–125 U/liter concentration range is one min, and the linear distribution of the standard curve established based on changes in color is R2 = 0.989. In addition, we demonstrated the detections of AST and ALT were not affected by the impact of glucose concentration Finally, wish the low-cost paper-based chips can be easily applied in personal health care and fast medical diagnosis, allowing the realization of the POC (point of care) concept.
Chen, Ting-Yueh, et 陳鼎岳. « Feasibility of 3D printable calcium sulfate bio-ink for bone graft substitute applications ». Thesis, 2014. http://ndltd.ncl.edu.tw/handle/7vb8e3.
Texte intégral臺北醫學大學
醫療器材產業碩士專班
102
Calcium sulfate has been used as one of the absorbable bone substitute materials and is highly biocompatible and osteoconductive. Calcium sulfate based bone grafting material has short setting, and as a result could be used for additive manufacturing technology, such as 3D printing. Calcium sulfate bone cement replacement can be exploited into bio-ink and used for customized bone graft substitute through 3D printing. The proposed research is to be prepared calcium sulfate biological ink and explore the feasibility of alternative bone graft. A set of synthesis and processing techniques based will be developed to prepare the calcium sulfate bio-ink. The prepared bio-ink will be characterized by using material characterization tools including optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM). Hardness and mechanical properties are determined for further investigation of 3D printing process. Additionally, in order to confirm the biocompatibility for bone graft application, a series of cell experiments will also conducted. These features can be useful in understanding the relationship between the microstructure, physical and mechanical properties of the calcium sulfate bio-ink. The analytical results indicated that the calcium sulfate is a potential 3D printing material that can be applied in biomedical applications.
Livres sur le sujet "Bio-ink"
Jrock, Ink. : A Concise Report On 40 Of The Biggest Rock Acts In Japan. Stone Bridge Press, 2005.
Trouver le texte intégralChapitres de livres sur le sujet "Bio-ink"
Aravind, Hemand, Blessy Joseph et Sabu Thomas. « Hydrogel as Bio-Ink for Organ Regeneration ». Dans Gels Horizons : From Science to Smart Materials, 165–79. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-7138-1_9.
Texte intégralTürke, Alexander. « Ink-Jet Printing of Conductive Nanostructures ». Dans Bio and Nano Packaging Techniques for Electron Devices, 293–303. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28522-6_14.
Texte intégralBarua, Ranjit, Sudipto Datta, Pallab Datta et Amit Roy Chowdhury. « Scaffolds and Tissue Engineering Applications by 3D Bio-Printing Process ». Dans Design, Development, and Optimization of Bio-Mechatronic Engineering Products, 78–99. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-8235-9.ch004.
Texte intégralBarua, Ranjit, Sudipto Datta, Pallab Datta et Amit Roy Chowdhury. « Scaffolds and Tissue Engineering Applications by 3D Bio-Printing Process ». Dans Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, 718–33. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8050-9.ch037.
Texte intégralActes de conférences sur le sujet "Bio-ink"
Habib, Md Ahasan, et Bashir Khoda. « Effect of Process Parameters on Cellulose Fiber Alignment in Bio-Printing ». Dans ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-3011.
Texte intégralHabib, Md Ahasan, et Bashir Khoda. « A Rheological Study of Bio-Ink : Shear Stress and Cell Viability ». Dans ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63996.
Texte intégralHabib, Ahasan, et Bashir Khoda. « Fiber Filled Hybrid Hydrogel for Bio-Manufacturing ». Dans ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8294.
Texte intégralKharel, Prabhuti, Rahmatul Mahmoud et Kunal Mitra. « RHEOLOGICAL ANALYSIS OF CELL EMBEDDED HYDROGEL BIO-INK FOR EXTRUSION BIOPRINTING ». Dans 3rd Thermal and Fluids Engineering Conference (TFEC). Connecticut : Begellhouse, 2018. http://dx.doi.org/10.1615/tfec2018.rhe.021751.
Texte intégralMatsuura, Koji, Ikuyo Sugimoto, Mieko Kodama et Masayuki Kanehara. « Electrode fabrication using conductive nano-ink and microfluidic technology for bio-applications ». Dans 2012 International Symposium on Micro-NanoMechatronics and Human Science (MHS). IEEE, 2012. http://dx.doi.org/10.1109/mhs.2012.6492397.
Texte intégralD, Subitha, Rahul S. G, Velmurugan S et Salveru Saiteja. « Curing Free, Silver Nano Ink Based Inkjet Printed Fabrics for Bio-Medical Applications ». Dans 2022 IEEE International Conference on Nanoelectronics, Nanophotonics, Nanomaterials, Nanobioscience & Nanotechnology (5NANO). IEEE, 2022. http://dx.doi.org/10.1109/5nano53044.2022.9828925.
Texte intégralNelson, Cartwright, Slesha Tuladhar et Md Ahasan Habib. « Designing an Interchangeable Multi-Material Nozzle System for 3D Bioprinting Process ». Dans ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63471.
Texte intégralLai, Wei-Cheng, Kathryn Moncivais, Swapnajit Chakravarty, Xiaolong Wang, Che-Yun Lin, Zhiwen J. Zhang et Ray T. Chen. « High Density Ink Jet Printing of Bio-molecules for Photonic Crystal-based Microarray Applications ». Dans Optical Sensors. Washington, D.C. : OSA, 2011. http://dx.doi.org/10.1364/sensors.2011.swa4.
Texte intégralNasir, Abdul, Yuya Mikami, Taku Takagishi, Rui Yatabe, Hiroaki Yoshioka, Nilesh J. Vasa et Yuji Oki. « Fully room temperature bio-sensing using active microdisk fabricated by ink-jet printing method ». Dans CLEO : Applications and Technology. Washington, D.C. : OSA, 2020. http://dx.doi.org/10.1364/cleo_at.2020.aw3k.5.
Texte intégralDing, Houzhu, et Robert C. Chang. « Bioprinting of Liquid Hydrogel Precursors in a Support Bath by Analyzing Two Key Features : Cell Distribution and Shape Fidelity ». Dans ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6675.
Texte intégral