Littérature scientifique sur le sujet « Automatic identification sensor »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Automatic identification sensor ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Automatic identification sensor"
Álvarez-Bazo, Fernando, Santos Sánchez-Cambronero, David Vallejo, Carlos Glez-Morcillo, Ana Rivas et Inmaculada Gallego. « A Low-Cost Automatic Vehicle Identification Sensor for Traffic Networks Analysis ». Sensors 20, no 19 (29 septembre 2020) : 5589. http://dx.doi.org/10.3390/s20195589.
Texte intégralKushwaha, Ruchi, Rohit Shambharkar, Suyash Gupta et Monika Malik. « Integration of Block chain Model for Energy Efficient WSN for IOT Application ». International Journal for Research in Applied Science and Engineering Technology 11, no 2 (28 février 2023) : 34–37. http://dx.doi.org/10.22214/ijraset.2023.48942.
Texte intégralGiurgiutiu, Victor, et Andrei N. Zagrai. « Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification ». Journal of Vibration and Acoustics 124, no 1 (1 juillet 2001) : 116–25. http://dx.doi.org/10.1115/1.1421056.
Texte intégralLiu, Li Min. « Internet of Things and RFID Technology ». Applied Mechanics and Materials 336-338 (juillet 2013) : 2512–15. http://dx.doi.org/10.4028/www.scientific.net/amm.336-338.2512.
Texte intégralZhou, Guang-Dong, Mei-Xi Xie, Ting-Hua Yi et Hong-Nan Li. « Optimal wireless sensor network configuration for structural monitoring using automatic-learning firefly algorithm ». Advances in Structural Engineering 22, no 4 (4 octobre 2018) : 907–18. http://dx.doi.org/10.1177/1369433218797074.
Texte intégralBeligni, Alessio, Claudio Sbarufatti, Andrea Gilioli, Francesco Cadini et Marco Giglio. « Robust Identification of Strain Waves due to Low-Velocity Impact with Different Impactor Stiffness ». Sensors 19, no 6 (14 mars 2019) : 1283. http://dx.doi.org/10.3390/s19061283.
Texte intégralZheng, Jun Hui, et Bing Li. « Fire Seat Intelligent Identification System ». Applied Mechanics and Materials 536-537 (avril 2014) : 421–25. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.421.
Texte intégralZheng, Fu. « Design of Auto Route Identified Vehicle Model Based on MC9S12XS128 ». Applied Mechanics and Materials 187 (juin 2012) : 146–50. http://dx.doi.org/10.4028/www.scientific.net/amm.187.146.
Texte intégralBeiderman, Yevgeny, Mark Kunin, Eli Kolberg, Ilan Halachmi, Binyamin Abramov, Rafael Amsalem et Zeev Zalevsky. « Automatic solution for detection, identification and biomedical monitoring of a cow using remote sensing for optimised treatment of cattle ». Journal of Agricultural Engineering 45, no 4 (21 décembre 2014) : 153. http://dx.doi.org/10.4081/jae.2014.418.
Texte intégralLi, Dongya, Wei Wang et De Zhao. « A Practical and Sustainable Approach to Determining the Deployment Priorities of Automatic Vehicle Identification Sensors ». Sustainability 14, no 15 (2 août 2022) : 9474. http://dx.doi.org/10.3390/su14159474.
Texte intégralThèses sur le sujet "Automatic identification sensor"
Ammineni, Chandini Muniratnam. « Design of Lignin Sensor for Identification of Paper Grades for an Automatic Waste Paper SortingSystem ». NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010907-181312.
Texte intégralAMMINENI, CHANDINI MUNIRATNAM. Design of Lignin Sensor forIdentification of Paper Grades for an Automatic Waste Paper SortingSystem. (Under the direction of Dr. M. K. Ramasubramanian.)The purpose of this research has been to design a lignin sensor fornon-destructive, real-time identification of waste paper grades, toaid in automating a waste paper sorting process. The sensor iscapable of identifying about 500 papers in one second. It is based onthe principle that fluorescence light emitted from paper followingabsorption of visible light has a wavelength distribution determinedby the chemical composition of the paper. The sensor is the most critical part in waste paper sorting, whichhas hitherto not been automated due to the inability to design asensor that distinguishes paper grades. This sensor is vastlysuperior to all other sensors previously designed for this purposebecause, it does not use the conventional reflective type opticalproperties of paper, and this is the only sensor that can identifyall grades unlike the previous sensors that could identify only whiteledger papers.
Narby, Erik. « Modeling and Estimation of Dynamic Tire Properties ». Thesis, Linköping University, Department of Electrical Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-6153.
Texte intégralInformation about dynamic tire properties has always been important for drivers of wheel driven vehicles. With the increasing amount of systems in modern vehicles designed to measure and control the behavior of the vehicle information regarding dynamic tire properties has grown even more important.
In this thesis a number of methods for modeling and estimating dynamic tire properties have been implemented and evaluated. The more general issue of estimating model parameters in linear and non-linear vehicle models is also addressed.
We conclude that the slope of the tire slip curve seems to dependent on the stiffness of the road surface and introduce the term combined stiffness. We also show that it is possible to estimate both longitudinal and lateral combined stiffness using only standard vehicle sensors.
Souza, Vinicius Mourão Alves de. « Classificação de fluxo de dados não estacionários com aplicação em sensores identificadores de insetos ». Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/55/55134/tde-13122016-113648/.
Texte intégralMany applications are able to generate data continuously over t ime in an ordered and uninterrupted way in a dynamic environment , called data streams. Among possible tasks that can be performed with these data, classification is one of the most prominent . Due to non-stationarity of the environment that generates the data, the features that describe the concepts of the classes can change over time. Thus, the classifiers that deal with data streams require constants updates in their classification models to maintain a stable accuracy over time. In the update phase, most of the approaches assume that after the classification of each example from the stream, their actual class label is available without any t ime delay (zero latency). Given the high label costs, it is more reasonable to consider that this delay could vary for the most portion of the data. In the more challenging case, there are applications with extreme latency, where in after the classification of the examples, heir actual class labels are never available to the algorithm. In this scenario, it is not possible to use traditional approaches. Thus, there is the need of new methods that are able to maintain a classification model updated in the absence of labeled data. In this thesis, besides to discuss the problem of latency to obtain actual labels in data stream classification problems, neglected by most of the works, we also propose two new algorithms to deal with extreme latency, called SCARGC and MClassification. Both algorithms are based on the use of clustering approaches to adapt to changes in an unsupervised way. The proposed algorithms are intuitive, simpleand showed superior or equivalent results in terms of accuracy and computation time compared to other approaches from literature in an evaluation on synthetic and real data. In addition to the advance in the state-of-the-art in the stream learning area, this thesis also presents contributions to an important technological application with social and public health impacts. Specifically, it was studied an optical sensor to automatically identify insect species by the means of the analysis of information coming from wing beat of insects. To describe the data, we conclude that the Mel-cepst ral coefficients guide to the best results among different evaluated digital signal processing techniques. This sensor is a concrete example of an applicat ion that generates a data st ream for which it is necessary to perform real-time classification. During the classification phase, this sensor must adapt their classification model to possible variat ions in environmental conditions, responsible for changing the behavior of insects. To address this problem, we propose a System with Multiple Classifiers that dynamically selects the most adequate classifier according to characteristics of each test example. In evaluations with minor changes in the environmental conditions, we achieved a classification accuracy close to 90% in a scenario with multiple classes and 95% when identifying Aedes aegypti species considering the training phase with only the positive class. In the scenario with considerable changes in the environmental conditions, we achieved 91% of accuracy considering 5 species and 96% to classify vector mosquitoes of important diseases as dengue and zika virus.
Skoglar, Per. « Modelling and control of IR/EO-gimbal for UAV surveillance applications ». Thesis, Linköping University, Department of Electrical Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1281.
Texte intégralThis thesis is a part of the SIREOS project at Swedish Defence Research Agency which aims at developing a sensor system consisting of infrared and video sensors and an integrated navigation system. The sensor system is placed in a camera gimbal and will be used on moving platforms, e.g. UAVs, for surveillance and reconnaissance. The gimbal is a device that makes it possible for the sensors to point in a desired direction.
In this thesis the sensor pointing problem is studied. The problem is analyzed and a system design is proposed. The major blocks in the system design are gimbal trajectory planning and gimbal motion control. In order to develop these blocks, kinematic and dynamic models are derived using techniques from robotics. The trajectory planner is based on the kinematic model and can handle problems with mechanical constraints, kinematic singularity, sensor placement offset and reference signal transformation.
The gimbal motion controller is tested with two different control strategies, PID and LQ. The challenge is to perform control that responds quickly, but do not excite the damping flexibility too much. The LQ-controller uses a linearization of the dynamic model to fulfil these requirements.
Abdul, Nour Charles. « Identification de paramètres optiques de structures tissulaires : instrumentation prototype associée : application à la dosimétrie de la thérapie photo-dynamique ». Vandoeuvre-les-Nancy, INPL, 1994. http://www.theses.fr/1994INPL006N.
Texte intégralHarichandran, Aparna. « Sensor Placement, Operation Identification and Fault Detection for Automated Construction Monitoring ». Thesis, Curtin University, 2022. http://hdl.handle.net/20.500.11937/87927.
Texte intégralCURRERI, Francesco. « Soft Sensor Design, Transferability and Causality through Machine Learning Techniques ». Doctoral thesis, Università degli Studi di Palermo, 2023. https://hdl.handle.net/10447/582112.
Texte intégralDann, Aaron. « Identification and simulation of an automated guided vechile for minimal sensor applications ». Thesis, University of Canterbury. Mechanical Engineering, 1996. http://hdl.handle.net/10092/6410.
Texte intégralŠíbl, Josef. « Studie řízení plynulých materiálových toků s využitím značení produktů ». Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2009. http://www.nusl.cz/ntk/nusl-222051.
Texte intégralBayram, Alican. « Identification Of Kinematic Parameters Using Pose Measurements And Building A Flexible Interface ». Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614819/index.pdf.
Texte intégralLivres sur le sujet "Automatic identification sensor"
Piramuthu, Selwyn. RFID & sensor network automation in the food industry : Ensuring quality and safety through supply chain visibility. Hoboken : John Wiley & Sons Inc., 2015.
Trouver le texte intégralPiramuthu, Selwyn, et Weibiao Zhou. RFID and Sensor Network Automation in the Food Industry : Ensuring Quality and Safety Through Supply Chain Visibility. Wiley & Sons, Limited, John, 2016.
Trouver le texte intégralPiramuthu, Selwyn, et Weibiao Zhou. RFID and Sensor Network Automation in the Food Industry : Ensuring Quality and Safety Through Supply Chain Visibility. Wiley & Sons, Incorporated, John, 2016.
Trouver le texte intégralPiramuthu, Selwyn, et Weibiao Zhou. RFID and Sensor Network Automation in the Food Industry : Ensuring Quality and Safety Through Supply Chain Visibility. Wiley & Sons, Incorporated, John, 2016.
Trouver le texte intégralChapitres de livres sur le sujet "Automatic identification sensor"
Lambrecht, S., et J. L. Pons. « Automatic Identification of Sensor Localization on the Upper Extremity ». Dans IFMBE Proceedings, 1497–500. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-00846-2_370.
Texte intégralNtalampiras, Stavros, et Georgios Giannopoulos. « Automatic Fault Identification in Sensor Networks Based on Probabilistic Modeling ». Dans Critical Information Infrastructures Security, 344–54. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31664-2_35.
Texte intégralBradley, Elizabeth, et Matthew Easley. « Reasoning about sensor data for automated system identification ». Dans Advances in Intelligent Data Analysis Reasoning about Data, 561–72. Berlin, Heidelberg : Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/bfb0052871.
Texte intégralCatucci, Antonella, Alessia Tricomi, Laura De Vendictis, Savvas Rogotis et Nikolaos Marianos. « Farm Weather Insurance Assessment ». Dans Big Data in Bioeconomy, 247–63. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71069-9_19.
Texte intégralJavidi, Bahram, Timothy O’Connor, Arun Anand, Inkyu Moon, Adrian Stern et Manuel Martinez-Corral. « Compact and Field Portable Biophotonic Sensors for Automated Cell Identification (Plenary Address) ». Dans Springer Proceedings in Physics, 15–18. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9259-1_4.
Texte intégralPea, Roy D., Paulina Biernacki, Maxwell Bigman, Kelly Boles, Raquel Coelho, Victoria Docherty, Jorge Garcia et al. « Four Surveillance Technologies Creating Challenges for Education ». Dans AI in Learning : Designing the Future, 317–29. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-09687-7_19.
Texte intégralMalhotra, Baljeet, Hoyoung Jeung, Thomas Kister, Stéphane Bressan et Kian-Lee Tan. « Maritime Data Management and Analytics : A Survey of Solutions Based on Automatic Identification System ». Dans Building Sensor Networks, 249–70. CRC Press, 2017. http://dx.doi.org/10.1201/b15479-11.
Texte intégralTONGCO, E. C., et D. R. MELDRUM. « OPTIMAL SENSOR PLACEMENT FOR IDENTIFICATION OF LARGE FLEXIBLE SPACE STRUCTURES ». Dans Automatic Control in Aerospace 1994 (Aerospace Control '94), 249–54. Elsevier, 1995. http://dx.doi.org/10.1016/b978-0-08-042238-1.50042-2.
Texte intégralChowdhury, Dhrubajit, Alexander Melin et Kris Villez. « Method for automatic correction of offset drift in online sensors ». Dans Celebrating passion for Water, Science and Technology, 17–42. IWA Publishing, 2022. http://dx.doi.org/10.2166/9781789063370_0017.
Texte intégralJoshi, Deepak, et Michael E. Hahn. « Electromyogram and Inertial Sensor Signal Processing in Locomotion and Transition Classification ». Dans Computational Tools and Techniques for Biomedical Signal Processing, 195–211. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-0660-7.ch009.
Texte intégralActes de conférences sur le sujet "Automatic identification sensor"
Iwamoto, Takashi. « Practical Identification of Specific Emitters Used in the Automatic Identification System ». Dans 2015 Sensor Signal Processing for Defence (SSPD). IEEE, 2015. http://dx.doi.org/10.1109/sspd.2015.7288518.
Texte intégralLi, Hongyu, Hairong Wang, Luyang Liu et Marco Gruteser. « Automatic Unusual Driving Event Identification for Dependable Self-Driving ». Dans SenSys '18 : The 16th ACM Conference on Embedded Networked Sensor Systems. New York, NY, USA : ACM, 2018. http://dx.doi.org/10.1145/3274783.3274838.
Texte intégralWang, Yicheng, et Murat Uney. « Fast Trajectory Forecasting With Automatic Identification System Broadcasts ». Dans 2022 Sensor Signal Processing for Defence Conference (SSPD). IEEE, 2022. http://dx.doi.org/10.1109/sspd54131.2022.9896218.
Texte intégralGafurov, Davrondzhon, Einar Snekkenes et Patrick Bours. « Gait Authentication and Identification Using Wearable Accelerometer Sensor ». Dans 2007 IEEE Workshop on Automatic Identification Advanced Technologies. IEEE, 2007. http://dx.doi.org/10.1109/autoid.2007.380623.
Texte intégralWisanmongkol, J., T. Sanpechuda et U. Ketprom. « Automatic vehicle identification with sensor-integrated RFID system ». Dans 2008 5th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON). IEEE, 2008. http://dx.doi.org/10.1109/ecticon.2008.4600541.
Texte intégralLin, Chung-Yen, Wenjie Chen et Masayoshi Tomizuka. « Automatic Sensor Frame Identification in Industrial Robots With Joint Elasticity ». Dans ASME 2013 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/dscc2013-3836.
Texte intégralHeydary, Mohammadreza Hajy, Pritesh Pimpale et Anand Panangadan. « Automatic Identification of Use of Public Transportation from Mobile Sensor Data ». Dans 2018 IEEE Green Technologies Conference (GreenTech). IEEE, 2018. http://dx.doi.org/10.1109/greentech.2018.00042.
Texte intégralKuzume, Koichi, Yoshitugu Watanabe, Haruko Masuda et Tomonari Masuzaki. « Inference System for Automatic Identification of Braille Blocks Using a Pressure Sensor Array ». Dans 2022 IEEE International Conference on Pervasive Computing and Communications Workshops and other Affiliated Events (PerCom Workshops). IEEE, 2022. http://dx.doi.org/10.1109/percomworkshops53856.2022.9767257.
Texte intégralLiu, Zhongdi, Xiang'ao Meng, Jiajia Cui, Zhipei Huang et Jiankang Wu. « Automatic Identification of Abnormalities in 12-Lead ECGs Using Expert Features and Convolutional Neural Networks ». Dans 2018 International Conference on Sensor Networks and Signal Processing (SNSP). IEEE, 2018. http://dx.doi.org/10.1109/snsp.2018.00038.
Texte intégralKuzume, Koichi, Haruko Masuda et Yudai Murakami. « Automatic Identification of Braille Blocks by Neural Network Using Multi-Channel Pressure Sensor Array ». Dans CIIS 2020 : 2020 The 3rd International Conference on Computational Intelligence and Intelligent Systems. New York, NY, USA : ACM, 2020. http://dx.doi.org/10.1145/3440840.3440858.
Texte intégralRapports d'organisations sur le sujet "Automatic identification sensor"
Burks, Thomas F., Victor Alchanatis et Warren Dixon. Enhancement of Sensing Technologies for Selective Tree Fruit Identification and Targeting in Robotic Harvesting Systems. United States Department of Agriculture, octobre 2009. http://dx.doi.org/10.32747/2009.7591739.bard.
Texte intégralSeginer, Ido, Louis D. Albright et Robert W. Langhans. On-line Fault Detection and Diagnosis for Greenhouse Environmental Control. United States Department of Agriculture, février 2001. http://dx.doi.org/10.32747/2001.7575271.bard.
Texte intégralEngel, Bernard, Yael Edan, James Simon, Hanoch Pasternak et Shimon Edelman. Neural Networks for Quality Sorting of Agricultural Produce. United States Department of Agriculture, juillet 1996. http://dx.doi.org/10.32747/1996.7613033.bard.
Texte intégralGalili, Naftali, Roger P. Rohrbach, Itzhak Shmulevich, Yoram Fuchs et Giora Zauberman. Non-Destructive Quality Sensing of High-Value Agricultural Commodities Through Response Analysis. United States Department of Agriculture, octobre 1994. http://dx.doi.org/10.32747/1994.7570549.bard.
Texte intégral