Littérature scientifique sur le sujet « Artificial Joint Wear Simulator »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Artificial Joint Wear Simulator ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Artificial Joint Wear Simulator"
Takadama, Hiroaki, et Mineo Mizuno. « A Simulated Synovial Fluid for Wear Characterization of Artificial Hip Joints by a Hip Joint Simulator ». Key Engineering Materials 309-311 (mai 2006) : 1273–76. http://dx.doi.org/10.4028/www.scientific.net/kem.309-311.1273.
Texte intégralOberbach, Thomas, Sabine Begand et Christian Kaddick. « Surface Resistance of Dispersion Ceramics against Third Body Abrasion ». Key Engineering Materials 396-398 (octobre 2008) : 161–64. http://dx.doi.org/10.4028/www.scientific.net/kem.396-398.161.
Texte intégralLestari, W. D., R. Ismail, J. Jamari et A. P. Bayuseno. « Study on Wear Debris Characterization of Polycarbonate Urethane (PCU) as a Bearing of Artificial Hip Joint ». Journal of Physics : Conference Series 2065, no 1 (1 novembre 2021) : 012004. http://dx.doi.org/10.1088/1742-6596/2065/1/012004.
Texte intégralWilliams, S., M. Butterfield, T. Stewart, E. Ingham, M. Stone et J. Fisher. « Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine 217, no 2 (1 février 2003) : 147–53. http://dx.doi.org/10.1243/09544110360579367.
Texte intégralvon Skrbensky, Gobert, Karoline Mühlbacher, Emir Benca, Alexander Kolb, Reinhard Windhager, Georg Reischl et Georg Reinisch. « Evaluation of Aerosol Electrospray Analysis of Metal-on-Metal Wear Particles from Simulated Total Joint Replacement ». Sensors 19, no 17 (30 août 2019) : 3751. http://dx.doi.org/10.3390/s19173751.
Texte intégralGalvin, A., C. Brockett, S. Williams, P. Hatto, A. Burton, G. Isaac, M. Stone, E. Ingham et J. Fisher. « Comparison of wear of ultra-high molecular weight polyethylene acetabular cups against surface-engineered femoral heads ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine 222, no 7 (1 octobre 2008) : 1073–80. http://dx.doi.org/10.1243/09544119jeim407.
Texte intégralOberbach, Thomas, Wilfried Glien et Christian Kaddick. « Third-Body-Wear as a Risk Factor in Joint Endoprosthetics ». Key Engineering Materials 284-286 (avril 2005) : 995–98. http://dx.doi.org/10.4028/www.scientific.net/kem.284-286.995.
Texte intégralStreicher, R. M., M. Semlitsch, R. Schön, H. Weber et C. Rieker. « Metal-On-Metal Articulation for Artificial Hip Joints : Laboratory Study and Clinical Results ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine 210, no 3 (septembre 1996) : 223–32. http://dx.doi.org/10.1243/pime_proc_1996_210_416_02.
Texte intégralIkeda, Junji, Takayuki Murakami, T. Sasaki, T. Shimozono, Y. Shouyama et M. Iwamoto. « Wear and Corrosion Resistance of Low Temperature Degradation Free ZTA for Artificial Joint ». Key Engineering Materials 720 (novembre 2016) : 296–300. http://dx.doi.org/10.4028/www.scientific.net/kem.720.296.
Texte intégralZhang, Lei Lei, He Jun Li, Ke Zhi Li, Ling Jun Guo, Wei Feng Cao et Xue Tao Shen. « Biotribology Behavior of Ultra-High Molecular Weight Polyethylene against Carbon/Carbon Composites Used for Hip Joint Replacement ». Materials Science Forum 685 (juin 2011) : 327–30. http://dx.doi.org/10.4028/www.scientific.net/msf.685.327.
Texte intégralThèses sur le sujet "Artificial Joint Wear Simulator"
Van, Der Merwe Johan. « Continued development of a joint-type knee wear simulator ». Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/19953.
Texte intégralENGLISH ABSTRACT: This thesis is concerned with the continued development of the Stellenbosch University joint-type knee wear simulator. Initially, information regarding simulators from the literature and commercial entities was collected to provide a knowledge base for current and future work. To further the design of the simulator itself, electronic hardware and software subsystems was developed and evaluated during experimental testing procedures. National Instruments’ cDAQ 9174 data acquisition unit was deemed inadequate for real-time inputoutput control, though proved sufficient for signal capturing purposes in conjunction with LabView software. Furthermore, the various servo-pneumatic sub-circuits’ individual ability to conform to the ISO 14243 series standards’ protocol led to the estimation of measurable performance criteria and the application to a single circuit for illustration. The anterior/posterior actuation circuit in question demonstrated adequate performance for the cases where the piston’s rod was respectively fixed and free to move. In-silico modelling and identification of the relevant servo-pneumatic components then commenced, with the valve and cylinder chamber models yielding adequate estimates of the recorded data. The identified quasi-static friction model proved sensitive to transient effects present within the system, resulting in performance deterioration of the integrated model. Sufficiently accounting for these effects would result in the emergence of the sub-circuit’s model as an invaluable tool in terms of control system development, prediction of the simulator’s behaviour and subsequent design recommendations. Future work therefore concerns improvement, identification and integration of the various sub-circuit models to fully exploit the aforementioned advantages.
AFRIKAANSE OPSOMMING: Hierdie tesis handel oor die voortgesette ontwikkeling van Universiteit Stellenbosch se gewrigstipe knie-afslytingsimulator. Aanvanklik is inligting versamel vanaf literatuur en kommersiële entiteite om sodoende ’n kennisbasis te verskaf vir huidige en toekomstige werk. Elektroniese hardeware en sagteware stelsels is ontwerp en geëvalueer tydens toetsprosedures om die ontwerp van die simuleerder self te verbeter. National Instruments se cDAQ 9174 dataversamelaarseenheid word onvoldoende geag vir intydse inset-uitset beheer, maar wel vir dataversamelingsdoeleindes tesame met LabView sagteware. Die nodigheid om die verskeie servo-pneumatiese sub-stroombane se individuele vermoë om aan te pas by die ISO 14243-reeks se protokol-standaarde te ondersoek, het gelei tot die beraming van meetbare werkverrigtingskriteria en die toepassing daarvan ter illustrasie. Die anterior/posterior stroombaan het voldoende werksverrigting getoon vir studies waar die suier se stang onderskeidelik vas en los was. In-silico modellering en die identifisering van servo-pneumatiese komponente het hierna begin. Die klep en silinderkamer modelle het voldoende skattings gelewer van die gemete data. Die geïdentifiseerde kwasistatiese wrywingsmodel het sensitiwiteit getoon teenoor die oorgangseffekte teenwoordig in die stelsel wat gelei het tot verminderde werksverrigting van die geïntegreerde model. Deur rekening te hou met sulke effekte kan die sub-stelsel se model waardevol wees sover dit beheerstelsel ontwikkeling aangaan, sowel as die voorspelling van die simuleerder se optrede en die daaropvolgende ontwerpsvoorstelle. Toekomstige navorsing kan fokus op die verbetering, identifikasie en integrasie van die verskeie sub-stroombaan modelle om die voorafgenoemde potensiaal ten volle ontgin.
Watters, Eamon Patrick John. « Wear properties of artificial hip joint materials ». Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321968.
Texte intégralSzklar, O. (Oleh). « Development of an unconstrained two-force dynamic simulator for the human knee joint ». Thesis, McGill University, 1985. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63376.
Texte intégralFarrar, Richard. « Simulation and analysis of the wear of metal on metal articulations in artificial hip joints ». Thesis, University of Leeds, 2001. http://etheses.whiterose.ac.uk/4397/.
Texte intégralBurgess, Ian C. « Tribological and mechanical properties of compliant bearings for total joint replacements ». Thesis, Durham University, 1997. http://etheses.dur.ac.uk/4720/.
Texte intégralBalounová, Hana. « Studium tření náhrad kyčelního kloubu ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230585.
Texte intégralŽonda, Peter. « Konstrukce simulátoru kyčelního kloubu ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241896.
Texte intégralSPINELLI, MICHELE. « Experimental tribological investigations of articular bearings for lower limb prosthesis ». Doctoral thesis, 2009. http://hdl.handle.net/2158/590125.
Texte intégralTAN-GUO-HONG et 譚國宏. « The Study of Wear Resistance of the Artificial Knee Joint ». Thesis, 2013. http://ndltd.ncl.edu.tw/handle/34725551544007285112.
Texte intégral正修科技大學
機電工程研究所
102
In aging society, the artificial knee replacement become increasingly common, however wear of the artificial knee components will happen after long-term use, which thus gives rise to other problems, or even failure. This research mainly aims at analyzing the wear of these artificial components and evaluating the cryogenic treatment for wear resistance. Wear analysis in vivo and in vitro measurements. The in vivo measurement could be carried out by analyzing the X-ray photos, the amount of wear could be estimated by the characteristic values of X-ray photos of a tibia insert; the in-vitro measurement can be accomplished by AMTI Force5 wear testing machine in accordance with ISO 14243 standard. Then the cryogenic treatment was utilized to compare the wear performance of components with and without this treatment. The analysis of in-vivo measurement shows that it has some difficulties to find the characteristic values of X-ray photos as to estimate the amount of in-vivo wear due to the complex shape a tibia insert, the in-vitro testing results indicate that AMTI Force5 wear tester in accordance with ISO 14243 standard is more practical and widely accepted by customers, which is useful for in-vitro wear measurement. In addition, the results show that the cryogenic treatment can significantly enhance the wear resistance.
Opperman, Tertius. « Tribological evaluation of joint fluid and the development of a synthetic lubricant for use in hip joint simulators ». Diss., 2005. http://hdl.handle.net/2263/26728.
Texte intégralDissertation (MEd (Mechanical Engineering))--University of Pretoria, 2006.
Mechanical and Aeronautical Engineering
unrestricted
Livres sur le sujet "Artificial Joint Wear Simulator"
M, Wright Timothy, et Goodman Stuart B, dir. Implant wear : Future of total joint replacement. Rosemont, Il : American Academy ofOrthopaedic Surgeons, 1996.
Trouver le texte intégralHutchings, Ian M. Friction, Lubrication and Wear of Artificial Joints. Wiley, 2003.
Trouver le texte intégralAmerican Academy of Orthopaedic Surgeons (Corporate Author), Timothy M. Wright (Editor) et Stuart B., M.D. Goodman (Editor), dir. Implant Wear in Total Joint Replacement : Clinical and Biologic Issues, Material and Design Considerations : Symposium, Oakbrook, Illinois, October 2000. Amer Acad of Orthopaedic Surgeons, 2001.
Trouver le texte intégralChapitres de livres sur le sujet "Artificial Joint Wear Simulator"
Takadama, Hiroaki, et Mineo Mizuno. « A Simulated Synovial Fluid for Wear Characterization of Artificial Hip Joints by a Hip Joint Simulator ». Dans Bioceramics 18, 1273–76. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-992-x.1273.
Texte intégralAkamatsu, Noriya. « Friction and Wear of Artificial Joints : A Historical Review ». Dans Joint Arthroplasty, 3–9. Tokyo : Springer Japan, 1999. http://dx.doi.org/10.1007/978-4-431-68529-6_1.
Texte intégralIkeuchi, Ken, Kazuto Takashima, Minako Ohashi et Jun Kusaka. « Friction and Wear Tests of Ceramics for All-Ceramic Artificial Joints ». Dans Joint Arthroplasty, 132–39. Tokyo : Springer Japan, 1999. http://dx.doi.org/10.1007/978-4-431-68529-6_13.
Texte intégralDowson, D., B. J. Gillis et J. R. Atkinson. « Penetration of Metallic Femoral Components into Polymeric Tibial Components Observed in a Knee Joint Simulator ». Dans Polymer Wear and Its Control, 215–28. Washington, D.C. : American Chemical Society, 1985. http://dx.doi.org/10.1021/bk-1985-0287.ch015.
Texte intégralSzarek, Arkadiusz, Marcin Korytkowski, Leszek Rutkowski, Rafał Scherer et Janusz Szyprowski. « Forecasting Wear of Head and Acetabulum in Hip Joint Implant ». Dans Artificial Intelligence and Soft Computing, 341–46. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29350-4_41.
Texte intégralBanaszkiewicz, Paul A. « Reactions of the Articular Capsule to Wear Products of Artificial Joint Prostheses ». Dans Classic Papers in Orthopaedics, 77–79. London : Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5451-8_18.
Texte intégralShibo, Wang, Ge Shirong, Wang Qingliang et Zhang Dekun. « Wear Mechanism of Sliding Tracks between Femoral Head and Acetabular Cup of Artificial Joint ». Dans Advanced Tribology, 851–52. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03653-8_284.
Texte intégralGotman, Irena. « Biomechanical and Tribological Aspects of Orthopaedic Implants ». Dans Springer Tracts in Mechanical Engineering, 25–44. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_2.
Texte intégral« Computational Wear Simulation of Artificial Hip Joints ». Dans Encyclopedia of Tribology, 425. Boston, MA : Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_100228.
Texte intégralClarke, Ian C., Jean Y. Lazennec, Evert J. Smith, Nobuhiko Sugano, Bryan J. McEntire et Giuseppe Pezzotti. « Ceramic-on-Ceramic Bearings : Simulator Wear Compared to Clinical Retrieval Data ». Dans Materials for Total Joint Arthroplasty, 85–131. IMPERIAL COLLEGE PRESS, 2015. http://dx.doi.org/10.1142/9781783267170_0005.
Texte intégralActes de conférences sur le sujet "Artificial Joint Wear Simulator"
Chamani, Alireza, Hitesh P. Mehta, Martin K. McDermott, Anilchandra Attaluri, Tina Zhang, Siri Jammula, L. D. Timmie Topoleski et Liang Zhu. « Theoretical Simulation of Temperature Elevations in a Joint Wear Simulator During Rotations ». Dans ASME 2013 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/sbc2013-14173.
Texte intégralGabriel, Stefan M., Andrew P. Dooris, Paul J. Ares, S. Daniel Kwak et Hassan A. Serhan. « Initial Wear Characterization of a Spinal Artificial Disc ». Dans World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64099.
Texte intégralSu, S. H., J. H. Zhang et D. H. Tao. « Bionic Lubrication System of Artificial Joints : System Design and Mechanics Simulation ». Dans World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64211.
Texte intégralZhang, Yanyan, Yiming Liang, Shiqiang Zhu, Menglong Ding, Yunhe Bai, Haoyuan Du, Jason Gu et Tiefeng Li. « Advances in artificial joint bio-friction and wear simulation assessment technology ». Dans 2022 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2022. http://dx.doi.org/10.1109/robio55434.2022.10011908.
Texte intégralMaiti, Raman, John Fisher, Zhongmin Jin, Liam Rowley et Louise Jennings. « Effect of Kinematics on the Wear Rate of the Patella Femoral Artificial Joint ». Dans ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-53651.
Texte intégralJhurani, Sunny M., et C. Fred Higgs. « A Model on the Motion of Wear Particles in the Synovial Fluid of an Artificial Hip Joint ». Dans ASME/STLE 2009 International Joint Tribology Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/ijtc2009-15169.
Texte intégralOnisoru, Justin, Nicolae Enescu, Aron Iarovici et Lucian Capitanu. « Wear Prediction of Total Hip Prostheses Due to Common Activities ». Dans ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35556.
Texte intégralZhu, Haiwen, Jianjun Zhu, Risa Rutter, Jiecheng Zhang et Hong-Quan Zhang. « Sand Erosion Model Prediction, Selection and Comparison for Electrical Submersible Pump (ESP) Using CFD Method ». Dans ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/fedsm2018-83179.
Texte intégralHauert, R. « A Review of DLC Coatings for Biological Applications ». Dans World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63879.
Texte intégralFischer, Alfons. « Clinical and Laboratory Wear Mechanisms of Artificial Hip Joints (Keynote) ». Dans World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64132.
Texte intégral