Littérature scientifique sur le sujet « Annealing. microstructure »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Annealing. microstructure ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Annealing. microstructure"
Li, Zhuang, Zhen Zheng, Da Tong Qiu, Li Zhe Guo, Xin Gao, Tao Yu et Zhao Hua Li. « Effect of Overaging Temperature on the Mechanical Properties of Ultra-High Strength Multiphase Steel ». Applied Mechanics and Materials 556-562 (mai 2014) : 249–52. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.249.
Texte intégralArruabarrena, Jon, et Jose M. Rodriguez-Ibabe. « Enhancement of the AISI 5140 Cold Heading Wire Steel Spheroidization by Adequate Control of the Initial As-Rolled Microstructure ». Metals 11, no 2 (27 janvier 2021) : 219. http://dx.doi.org/10.3390/met11020219.
Texte intégralScheriau, Stephan, Thomas Schöberl, Siegfried Kleber et Reinhard Pippan. « Recrystallization and Grain Growth Behavior of SPD Deformed 316L Stainless Steel ». Advanced Materials Research 89-91 (janvier 2010) : 491–96. http://dx.doi.org/10.4028/www.scientific.net/amr.89-91.491.
Texte intégralSun, Yangyang, Hui Chang, Zhigang Fang, Yuecheng Dong, Zhenhua Dan, Yanhua Guo et Lian Zhou. « Study on Microstructure and Mechanical Properties of Low Cost Ti-Fe-B Alloy ». MATEC Web of Conferences 321 (2020) : 11029. http://dx.doi.org/10.1051/matecconf/202032111029.
Texte intégralTerada, Daisuke, Bo Long Li, Masaaki Sugiyama et Nobuhiro Tsuji. « Low Temperature Recrystallization of High Purity Iron Severely Deformed by ARB Process ». Materials Science Forum 558-559 (octobre 2007) : 357–62. http://dx.doi.org/10.4028/www.scientific.net/msf.558-559.357.
Texte intégralNasiri, Z., et H. Mirzadeh. « Spheroidization heat treatment and intercritical annealing of low carbon steel ». Journal of Mining and Metallurgy, Section B : Metallurgy 55, no 3 (2019) : 405–11. http://dx.doi.org/10.2298/jmmb180813033n.
Texte intégralWu, Gui Lin. « Recrystallization Microstructure and Texture of Highly Strained Commercial Purity Aluminium Alloy ». Materials Science Forum 783-786 (mai 2014) : 282–87. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.282.
Texte intégralLiu, Mu Lin, Naoki Takata, Asuka Suzuki et Makoto Kobashi. « Inhomogeneous Microstructure and its Thermal Stability of AlSi10Mg Lattice Structure Manufactured via Laser Powder Bed Fusion ». Materials Science Forum 1016 (janvier 2021) : 826–31. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.826.
Texte intégralYan, Bin, Hongbo Li, Jie Zhang et Ning Kong. « The Effect of Initial Annealing Microstructures on the Forming Characteristics of Ti–4Al–2V Titanium Alloy ». Metals 9, no 5 (17 mai 2019) : 576. http://dx.doi.org/10.3390/met9050576.
Texte intégralSteineder, Katharina, Daniel Krizan, Reinhold Schneider, Coline Beal et Christof Sommitsch. « The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel ». Materials Science Forum 879 (novembre 2016) : 1847–52. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1847.
Texte intégralThèses sur le sujet "Annealing. microstructure"
Thomas, Richard. « Microstructure development in multicomponent alloys ». Thesis, University of Oxford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242037.
Texte intégralOhlsson, Richard. « Variations in hardness and microstructure in cartridge cases at annealing ». Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-68670.
Texte intégralExamensarbetet är utfört hos Norma Precision, ett företag som tillverkar ammunition för viltjakt och för tävlingsskytte. Två sorters hylsor vid namn 300 Winchester Magnum samt 308 Winchester undersöks hur deras hårdhet är innan respektive efter de två mynningsglödgningar hylsorna genomgår under tillverkningen. Hylsorna varierar i hårdhet och en undersökning kommer göras för att dra kopplingar till hylsornas mikrostruktur för att få en förståelse av variationerna och eventuellt kunna undvika variationer i framtiden. Hylsorna valdes ut vid olika dagar, 300 Winchester Magnum togs vid tre olika tillfällen när olika egenskaper skiljde och 308 Winchester togs vid två tillfällen. Varje dag plockades tjugo hylsor ut, fem innan första mynningsglödgningen, fem efter den första mynningsglödgningen, fem efter formning och kalibrering av hylsorna samt fem efter den andra mynningsglödgningen. På de utplockade hylsorna gjordes först hårdhetstester, då de mättes vid 1mm, 3mm och 6mm ifrån mynningen och fem mätningar runt hylsan vid varje mättillfälle. Efter det analyserades resultaten och de två hylsor som varierade mest från varje dag och varje steg togs med till labbet på Karlstads Universitet. I labbet mättes hylsorna med en mikrohårdhetsmätare. Hylsorna mättes med jämna mellanrum genom hela hylsan för att skapa en hårdhetsprofil. Nästa steg var sedan att etsa hylsorna och undersöka dem i ett ljusmikroskop, där mätningar av kornstorlek i mikrometer och ASTM gjordes. Resultaten från den vanliga hårdhetsmätningen och från mikrohårdhetsmätningen visade liknande tendenser. Det upptäckes variationer i varje steg och varje dag i båda hårdhetsmätningarna och de två sorternas hylsor betedde sig likadant. Resultaten från kornstorleksmätningarna visade att efter glödgning ökade kornstorleken. Det fanns dock inget tydligt mellan kornstorlek och hårdhet då resultaten varierade, i vissa fall hade hylsorna med högre hårdhet en mindre kornstorlek än hylsor med lägre hårdhet. Att använda mässingens kornstorlek kan fungera för att få en övergripande bild av hårdheten, men för att få en bättre förståelse av materialegenskaperna behöver fler egenskaper undersökas.
Kulakov, Mykola. « Microstructure evolution during intercritical annealing of a Mn-Cr dual-phase steel ». Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/44695.
Texte intégralMiszczyk, Magdalena Maria. « Microstructure and texture evolution during annealing of plane strain compressed fcc metals ». Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2013. http://tel.archives-ouvertes.fr/tel-00904405.
Texte intégralZhu, Benqiang. « Phase-field modeling of microstructure evolution in low-carbon steels during intercritical annealing ». Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/52176.
Texte intégralApplied Science, Faculty of
Materials Engineering, Department of
Graduate
Cusick, Michael Christopher. « THE USE OF SELECTIVE ANNEALING FOR SUPERPLASTIC FORMING OF MG AZ31 ALLOY ». UKnowledge, 2007. http://uknowledge.uky.edu/gradschool_theses/492.
Texte intégralXu, Wanqiang Materials Science & Engineering Faculty of Science UNSW. « Effect of initial microstructure on the deformation and annealing behaviour of low carbon steel ». Awarded by:University of New South Wales. School of Materials Science and Engineering, 2006. http://handle.unsw.edu.au/1959.4/26801.
Texte intégralLonganecker, Melanie J. « CONTROLLING THE MICROSTRUCTURE AND KINETICS OF BLOCK COPOLYMER SELF-ASSEMBLY BY DIRECT IMMERSION ANNEALING ». University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1509902596608426.
Texte intégralAl-Buhamad, Oday Hatim Materials Science & Engineering Faculty of Science UNSW. « Accumulative roll bonding of multilayered aluminium alloys ». Awarded by:University of New South Wales. Materials Science & ; Engineering, 2009. http://handle.unsw.edu.au/1959.4/44806.
Texte intégralPorter, S. L. « Microstructure-mechanical property relationships during the thermomechnaical simulation and annealing of novel interstitial free steels ». Thesis, Swansea University, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638555.
Texte intégralLivres sur le sujet "Annealing. microstructure"
United States. National Aeronautics and Space Administration., dir. Effect of high temperature annealing on the microstructure and thermoelectric properties of GaP doped SiGe. [Washington, DC] : National Aeronautics and Space Administration, 1987.
Trouver le texte intégralUnited States. National Aeronautics and Space Administration., dir. Effect of high temperature annealing on the microstructure and thermoelectric properties of GaP doped SiGe. [Washington, DC] : National Aeronautics and Space Administration, 1987.
Trouver le texte intégralUnited States. National Aeronautics and Space Administration., dir. Sulfur impurities and the microstructure of alumina scales. [Washington, DC] : National Aeronautics and Space Administration, 1997.
Trouver le texte intégralKnorr, D. B. Proceedings From the Symposia Textures in Non-Metallic Materials and Microstructure and Texture Evolution During Annealing of Deformed Materials : A special ... Microstructures (Textures & Microstructures). Routledge, 1991.
Trouver le texte intégralHibbard, Glenn David. Microstructural evolution during annealing in nanostructured electrodeposits. 2002.
Trouver le texte intégralBrooks, Charlie R. Principles of the Heat Treatment of Plain Carbon and Low Alloy Steels. ASM International, 1996. http://dx.doi.org/10.31399/asm.tb.phtpclas.9781627083539.
Texte intégralTerheggen, Mathias. Microstructural changes in CdS/CdTe thin-film solar cells during annealing with chlorine. 2003.
Trouver le texte intégralBaba, Nor Bahiyah, Mohd Mustafa Al Bakri Abdullah, Mohd Najib Muhamed, Faizul Che Pa, Rabiatul Manisah Mohamed et Muhammad Faheem Mohd Tahir. ENGINEERING MATERIALS FOR TECHNOLOGISTS. 2024e éd. PENERBIT UNIVERSITI MALAYSIA PERLIS, 2024. http://dx.doi.org/10.58915/bk2023.016.
Texte intégralSztwiertnia, K. Application of Orientation Mapping in TEM and SEM for Study of Microstructural Evolution During Annealing - Example : Aluminum Alloy with Bimodal Particle Distribution. INTECH Open Access Publisher, 2012.
Trouver le texte intégralChapitres de livres sur le sujet "Annealing. microstructure"
Berman, T. D., W. Donlon, R. Decker, J. Huang, T. M. Pollock et J. W. Jones. « Microstructure Evolution in AZ61L During TTMP and Subsequent Annealing Treatments ». Dans Magnesium Technology 2011, 599–603. Cham : Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48223-1_110.
Texte intégralBerman, T. D., W. Donlon, R. Decker, J. Huang, T. M. Pollock et J. W. Jones. « Microstructure Evolution in AZ61L During TTMP and Subsequent Annealing Treatments ». Dans Magnesium Technology 2011, 599–603. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118062029.ch110.
Texte intégralKestens, Leo A. I., Jai Gautam et Roumen Petrov. « Texture and Microstructure Evolution at the Metal-Vapour Interface During Transformation Annealing in a Mn and Al Alloyed Ultra Low Carbon Steel ». Dans Microstructure and Texture in Steels, 103–9. London : Springer London, 2009. http://dx.doi.org/10.1007/978-1-84882-454-6_6.
Texte intégralWang, Qi, Zhou Wang, Chengbing Wang et Junyan Zhang. « The Friction Property of Hydrogenated Carbon with Fullerene Microstructure after Annealing ». Dans Advanced Tribology, 608–9. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03653-8_197.
Texte intégralCho, Jae Hyung, Shi Hoon Choi et Kyu Hwan Oh. « Texture and Microstructure Evolution of Gold Sheet during Deformation and Annealing ». Dans Materials Science Forum, 165–70. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.165.
Texte intégralWatanabe, Tadao, Sadahiro Tsurekawa, H. Fujii et T. Kanno. « The Control of Texture and Grain Boundary Microstructure by Magnetic Annealing ». Dans Materials Science Forum, 1151–58. Stafa : Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-975-x.1151.
Texte intégralCho, Jae Hyung, Anthony D. Rollett et Kyu Hwan Oh. « The Microstructure Evolution of Copper and Gold Bonding Wires during Annealing ». Dans Materials Science Forum, 399–404. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-434-0.399.
Texte intégralKambe, Shiro, Kohki Yamada, Shigetoshi Ohshima et Katsuro Okuyama. « Change in Microstructure of Bi2Sr1.8Ca1.2Cu2Oy by Yttrium, Lanthanum Substitution and Ar Annealing ». Dans Advances in Superconductivity V, 349–51. Tokyo : Springer Japan, 1993. http://dx.doi.org/10.1007/978-4-431-68305-6_76.
Texte intégralLiao, Jia Xuan, En Qiu Li, Zhong Tian, Jiang Xu et Hai Guang Yang. « Effect of Annealing Temperature on the Microstructure of Barium Strontium Titanate Films ». Dans High-Performance Ceramics V, 56–58. Stafa : Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.56.
Texte intégralLi, Hua Long, Jong Tae Park et Jerzy A. Szpunar. « Monte Carlo Simulation of Texture and Microstructure Transformation during Annealing of Steel ». Dans Solid State Phenomena, 83–87. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-39-6.83.
Texte intégralActes de conférences sur le sujet "Annealing. microstructure"
Snitzer, John, Xiaoyuan Lou, Bingqiang Wei et Jian Wang. « Influence of Solution Annealing on Creep Behavior of Additively Manufactured 316H SS Using Microstructurally Graded Specimen ». Dans AM-EPRI 2024, 994–1007. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0994.
Texte intégralSteinbacher, Matthias, Rainer Fechte-Heinen et Gerrit Hellenbrandt. « Tempering Behavior of Low Alloy Case Hardening Steels with Bainitic and Martensitic Microstructures ». Dans IFHTSE 2024, 301–8. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.ifhtse2024p0301.
Texte intégralYang, Deming, Yang Gao et Chengqi Sun. « Microstructure and Properties of Equiaxed 316L Stainless Steel Coating Deposited by LPPS ». Dans ITSC2015, sous la direction de A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen et C. A. Widener. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0831.
Texte intégralWang, H. T., C. J. Li, G. J. Yang, C. X. Li, Q. Zhang et W. Y. Li. « Microstructural Characterization of Cold-Sprayed Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled Feedstock Powder ». Dans ITSC2007, sous la direction de B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima et G. Montavon. ASM International, 2007. http://dx.doi.org/10.31399/asm.cp.itsc2007p0135.
Texte intégralLi, H., J. Lin, T. A. Dean, S. W. Wen et A. C. Bannister. « Modelling of Damage Reduction and Microstructure Evolution by Annealing ». Dans 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729529.
Texte intégralLuo, X. T., C. J. Li et G. J. Yang. « Effect of Annealing on Microstructure of Cold Sprayed C-BNp/NiCrAl Composite Coating ». Dans ITSC2010, sous la direction de B. R. Marple, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima et G. Montavon. DVS Media GmbH, 2010. http://dx.doi.org/10.31399/asm.cp.itsc2010p0352.
Texte intégralNakagawa, Kyuya, Shinri Tamiya, Shu Sakamoto, Gabsoo Do, Shinji Kono et Takaaki Ochiai. « Observation of microstructure change during freeze-drying by in-situ X-ray Computed Tomography ». Dans 21st International Drying Symposium. Valencia : Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7642.
Texte intégralLuo, X. T., et C. J. Li. « Thermal Stability of Microstructure and Hardness of Cold-Sprayed cBNp/NiCrAl Nanocomposite Coating ». Dans ITSC2011, sous la direction de B. R. Marple, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima et A. McDonald. DVS Media GmbH, 2011. http://dx.doi.org/10.31399/asm.cp.itsc2011p1098.
Texte intégralYaqin Song, Reza Abbaspour, Muhannad S. Bakir et Suresh K. Sitaraman. « Thermal annealing effects on copper microstructure in Through-Silicon-Vias ». Dans 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2016. http://dx.doi.org/10.1109/itherm.2016.7517533.
Texte intégralLi, W. C., S. Roberts et T. J. Balk. « Effects of annealing on microstructure of osmium-ruthenium thin films ». Dans 2009 IEEE International Vacuum Electronics Conference (IVEC). IEEE, 2009. http://dx.doi.org/10.1109/ivelec.2009.5193510.
Texte intégralRapports d'organisations sur le sujet "Annealing. microstructure"
Draper, S. L. Effect of high-temperature annealing on the microstructure and thermoelectric properties of GaP doped SiGe. Office of Scientific and Technical Information (OSTI), octobre 1987. http://dx.doi.org/10.2172/5798950.
Texte intégralKim, Myong. The effect of processing, deformation and annealing on the microstructure of Y sub 1 Ba sub 2 Cu sub 3 O sub 7 - sub. delta. Office of Scientific and Technical Information (OSTI), février 1990. http://dx.doi.org/10.2172/6837493.
Texte intégralCaskey, Jr, G. R. Microstructural Changes Accompanying Annealing of Cold-Worked Uranium. Office of Scientific and Technical Information (OSTI), octobre 2002. http://dx.doi.org/10.2172/804674.
Texte intégralBarney, Monica Michele. Microstructural Coarsening during Thermomechanical Fatigue and Annealing of Micro Flip-Chip Solder Joints. Office of Scientific and Technical Information (OSTI), décembre 1998. http://dx.doi.org/10.2172/760289.
Texte intégral