Littérature scientifique sur le sujet « AMg6 aluminum alloy »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « AMg6 aluminum alloy ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "AMg6 aluminum alloy"
Luts, A. R., Yu V. Sherina, A. P. Amosov et A. D. Kachura. « Liquid matrix SHS manufacturing and heat treatment of Al–Mg composites reinforced with fine titanium carbide ». Izvestiya. Non-Ferrous Metallurgy, no 4 (21 août 2023) : 70–86. http://dx.doi.org/10.17073/0021-3438-2023-4-70-86.
Texte intégralRakhadilov, B., L. Zhurerova, W. Wieleba, Zh Sagdoldina et A. K. Khassenov. « Features of the structure and properties formation of AMG6 alloy under the equal channel angular pressing ». Bulletin of the Karaganda University. "Physics" Series 97, no 1 (30 mars 2020) : 42–49. http://dx.doi.org/10.31489/2020ph1/42-49.
Texte intégralUazyrkhanova, Gulzhaz, Bauyrzhan K. Rakhadilov, Alexandr Myakinin et Zhuldyz Uazyrkhanova. « The Change in the Thin Structure and Mechanical Properties of Aluminum Alloys at Intensive Plastic Deformation ». Materials Science Forum 906 (septembre 2017) : 114–20. http://dx.doi.org/10.4028/www.scientific.net/msf.906.114.
Texte intégralNikitin, K. V., V. I. Nikitin, I. Yu Timoshkin, R. M. Biktimirov et A. P. Novikov. « Hereditary influence of deformed waste on the efficiency of Al–Si–Mg and Al–Mg alloy modification ». Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy), no 3 (15 juin 2022) : 38–46. http://dx.doi.org/10.17073/0022-3438-2022-3-38-46.
Texte intégralПрохоров, В. М., et Е. Л. Громницкая. « Зависимость от давления коэффициентов упругости алюминий-магниевого сплава AMg6 и нанокомпозитного сплава n-Mg6/C-=SUB=-60-=/SUB=- ». Физика твердого тела 60, no 4 (2018) : 765. http://dx.doi.org/10.21883/ftt.2018.04.45690.300.
Texte intégralLobanov, L. M., M. O. Pashchyn, O. M. Tymoshenko, P. V. Goncharov, O. L. Mikhodui et K. V. Shiyan. « Increase in the life of welded joints of AMg6 aluminum alloy ». Paton Welding Journal 2020, no 4 (28 avril 2020) : 2–8. http://dx.doi.org/10.37434/tpwj2020.04.01.
Texte intégralGoncharova, O. A., D. S. Kuznetsov, N. N. Andreev, N. P. Andreeva et Yu I. Kuznetsov. « Chamber corrosion inhibitors of aluminum alloy AMG6 ». Corrosion : Materials, Protection, no 8 (21 août 2019) : 23–28. http://dx.doi.org/10.31044/1813-7016-2019-0-8-23-28.
Texte intégralOvchinnikov, Viktor, Viktorya Berezina et Tat'yana Skakova. « A normalized method for determining the influence on the fixed joints tightness using the technology of the sealing surface job ». Science intensive technologies in mechanical engineering 2021, no 11 (30 novembre 2021) : 20–29. http://dx.doi.org/10.30987/2223-4608-2021-11-20-29.
Texte intégralLoginov, Yu N., et A. G. Illarionov. « DISCONTINUITY OF AMG6 ALUMINUM ALLOY EXTRUDED TUBE STRUCTURE ». Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy), no 6 (1 mars 2015) : 35. http://dx.doi.org/10.17073/0021-3438-2013-6-35-40.
Texte intégralGoncharova, O. A., D. S. Kuznetsov, N. N. Andreev, Yu I. Kuznetsov et N. P. Andreeva. « Chamber Inhibitors of Corrosion of AMg6 Aluminum Alloy ». Protection of Metals and Physical Chemistry of Surfaces 56, no 7 (décembre 2020) : 1293–98. http://dx.doi.org/10.1134/s2070205120070060.
Texte intégralThèses sur le sujet "AMg6 aluminum alloy"
Didych, Iryna. « Estimation of structural integrity and lifetime of important structural elements ». Electronic Thesis or Diss., Université Clermont Auvergne (2021-...), 2021. http://www.theses.fr/2021UCFAC116.
Texte intégralThis work has been performed under co-tutelle supervision between Ternopil IvanPuluj National Technical University in Ternopil (Ukraine) and UniversityClermont Auvergne, CNRS, SIGMA Clermont, Institut Pascal in Clermont-Ferrand (France).This thesis solves the scientific task of responsible structural elements strength andlifetime evaluation. The aim of the thesis is to evaluate the strength and residuallifetime of structural elements by machine learning methods.Most parts of machines and structural elements while being in service are under theinfluence of loads of various nature. Such forces are applied either directly to theelement or transmitted through neighbor elements connected to it. For the normaloperation of the responsible structures parts, each element must have certain sizeand shape that will withstand the loads acting on it. In particular, it must haveappropriate strength properties, not deform significantly under the action ofstresses, be rigid, and preserve its original shape.The calculated residual lifetime of machines and structures can be predicted usingfatigue crack growth (FCG) diagrams. Often, the experimental data have a certainspread, which should be taken into account in their analysis. The experimentalmethod often takes a lot of time and human resources. Therefore, it is advisable tolearn how to calculate the residual lifetime using machine learning methods,particularly, neural networks, boosted trees, random forests, support-vectormachines and the method of k–nearest neighbors
Chapitres de livres sur le sujet "AMg6 aluminum alloy"
Markushev, M. V., et M. Yu Murashkin. « Structure and Mechanical Behavior of the AMg6 Aluminum Alloy after Severe Plastic Deformation and Annealing ». Dans Ultrafine Grained Materials II, 521–30. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118804537.ch59.
Texte intégralSaikov, Ivan Vladimirovich, Andrey Yurevich Malakhov et Igor Vladimirovich Denisov. « Obtaining bimetallic sheets with cladding layer of aluminum alloy AMg6 ». Dans Application to Journal. Tambov University Reports. Series : Natural and Technical Sciences, 520–23. Publishing House “Derzhavinskiy”, 2018. http://dx.doi.org/10.20310/1810-0198-2018-23-123p-520-523.
Texte intégralActes de conférences sur le sujet "AMg6 aluminum alloy"
Prokhorov, V., A. Korobov, A. Kokshaiskii, S. Perfilov et A. Volkov. « Effect of nanostructuring on the elastic properties of aluminum alloy AMg6 ». Dans RECENT DEVELOPMENTS IN NONLINEAR ACOUSTICS : 20th International Symposium on Nonlinear Acoustics including the 2nd International Sonic Boom Forum. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4934461.
Texte intégralKozhemyakina, A. « Experimental study of the effect of increasing technological plasticity during asymmetric rolling of aluminum alloys ». Dans Superplasticity in Advanced Materials. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902615-36.
Texte intégralProkhorov, Viacheslav, Alexander Korobov, Alex Kokshaiskii, Sergey Perfilov et Ivan Evdokimov. « Comparative characterization of the nonlinear elastic properties of aluminum alloy AMg6 and nanocarbon composite 0.3wt.%C60/AMg6 from third order elastic constants and ultrasonic nonlinear parameter measurements ». Dans 2016 IEEE International Ultrasonics Symposium (IUS). IEEE, 2016. http://dx.doi.org/10.1109/ultsym.2016.7728807.
Texte intégralChumaevsky, A. V., A. A. Eliseev, A. V. Filippov, V. E. Rubtsov et S. Yu Tarasov. « Tensile strength on friction stir processed AMg5 (5083) aluminum alloy ». Dans ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2016 : Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Author(s), 2016. http://dx.doi.org/10.1063/1.4966320.
Texte intégralChumaevsky, A. V., A. V. Gusarova, A. P. Zykova, A. O. Panfilov, E. S. Khoroshko, S. Yu Nikonov, L. L. Zhukov, V. A. Beloborodov et P. S. Sokolov. « FORMATION OF DEFECTS WHEN PRODUCING BIMETALLIC COMPOSITE MATERIALS BASED ON COPPER AND AMG5 ALUMINUM ALLOY DURING ELECTRON-BEAM 3D PRINTING ». Dans Physical Mesomechanics of Materials. Physical Principles of Multi-Layer Structure Forming and Mechanisms of Non-Linear Behavior. Novosibirsk State University, 2022. http://dx.doi.org/10.25205/978-5-4437-1353-3-310.
Texte intégralPetrov, M. A., D. A. Romashov et V. V. Isakov. « Application of Contactless Methods for Deformation Assessment During Erichsen Cupping Test of Aluminium Sheet Samples ». Dans 33rd International Conference on Computer Graphics and Vision. Keldysh Institute of Applied Mathematics, 2023. http://dx.doi.org/10.20948/graphicon-2023-274-284.
Texte intégralPushkov, V. A., S. A. Novikov, V. A. Sinitsyn, I. N. Govorunov et O. N. Ignatova. « Deformation of aluminum alloys AD-1, AMg-6 and D-16 at dynamic compression and temperatures of 25–250°C ». Dans HIGH PERFORMANCE STRUCTURES AND MATERIALS 2006. Southampton, UK : WIT Press, 2006. http://dx.doi.org/10.2495/hpsm06033.
Texte intégral