Articles de revues sur le sujet « ALUMINIUM 6061 »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « ALUMINIUM 6061 ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Pranav, Domadala, Sruthi Sivaram, Mukesh Nadarajan et Ashish Selokar. « Behaviour of Heat Treated Aluminium Alloy under Hardness Test ». Applied Mechanics and Materials 903 (avril 2021) : 99–105. http://dx.doi.org/10.4028/www.scientific.net/amm.903.99.
Texte intégralHaga, Toshio, Hideki Inui, Ryoji Nakamura, Shinji Kumai et Hisaki Watari. « Strip Casting of 6061 and Recycled 6061 Alloy by an Unequal Diameter Twin Roll Caster ». Advanced Materials Research 264-265 (juin 2011) : 1911–16. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.1911.
Texte intégralWang, You Bin, et Jian Min Zeng. « The Effects of Mn Addition on Microstructure and Properties in 6061 Aluminium Alloy ». Advanced Materials Research 399-401 (novembre 2011) : 1838–42. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.1838.
Texte intégralKou, L. Y., W. Y. Zhao, X. Y. Tuo, G. Wang et C. R. Sun. « Effect of stress triaxiality on fracture failure of 6061 aluminium alloy ». Journal of Mechanical Engineering and Sciences 14, no 2 (23 juin 2020) : 6961–70. http://dx.doi.org/10.15282/jmes.14.2.2020.33.0545.
Texte intégralAb Rahim, Syaiful Nizam, et Mohd Amri Lajis. « Effects on Mechanical Properties of Solid State Recycled Aluminium 6061 by Extrusion Material Processing ». Key Engineering Materials 730 (février 2017) : 317–20. http://dx.doi.org/10.4028/www.scientific.net/kem.730.317.
Texte intégralRinderer, Barbara. « The Metallurgy of Homogenisation ». Materials Science Forum 693 (juillet 2011) : 264–75. http://dx.doi.org/10.4028/www.scientific.net/msf.693.264.
Texte intégralPradani, Yayi Febdia, Mochamad Sulaiman et Saiful Hardiyanto. « ANALISIS TINGKAT KEKERASAN ALUMINIUM 6061 BERDASARKAN VARIASI MEDIA PENDINGIN PADA PROSES PACK CARBURIZING ». Steam Engineering 2, no 1 (1 septembre 2020) : 1–10. http://dx.doi.org/10.37304/jptm.v2i1.1663.
Texte intégralLuo, Daming, Fan Li et Guohua Xing. « Corrosion resistance of 6061-T6 aluminium alloy and its feasibility of near-surface reinforcements in concrete structure ». REVIEWS ON ADVANCED MATERIALS SCIENCE 61, no 1 (1 janvier 2022) : 638–53. http://dx.doi.org/10.1515/rams-2022-0048.
Texte intégralLubis, M. Sobron Yamin, Abrar Riza et Dani Putra Agung. « PENGARUH PARAMETER PEMESINAN TERHADAP KEKASARAN PERMUKAAN MATERIAL ALUMINIUM 6061 DAN 7075 PADA PROSES SEKRAP ». Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan 4, no 1 (1 juin 2020) : 145. http://dx.doi.org/10.24912/jmstkik.v4i1.3414.
Texte intégralKareem, Ansar, Jaber Abu Qudeiri, Asarudheen Abdudeen, Thanveer Ahammed et Aiman Ziout. « A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting ». Materials 14, no 1 (1 janvier 2021) : 175. http://dx.doi.org/10.3390/ma14010175.
Texte intégralHidayat, Hidayat. « OPTIMASI PARAMETER PROSES ANODISASI ALUMINIUM 6061 UNTUK KOMPONEN OTOMOTIF ». Jurnal Teknik Mesin dan Pembelajaran 5, no 1 (5 juin 2022) : 34. http://dx.doi.org/10.17977/um054v5i1p34-43.
Texte intégralIzumi, T., Goroh Itoh, Nobuhide Itoh et Y. Sasaki. « Hydrogen Permeation Behaviour in Aluminium Alloys ». Materials Science Forum 519-521 (juillet 2006) : 1265–70. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.1265.
Texte intégralChen, Wei, Yanfei Gu, Yingping Guan et Chunfa Dong. « Dynamic recrystallisation and modelling of microstructural evolution of high-titanium-content 6061 aluminium alloy ». International Journal of Materials Research 111, no 4 (1 mai 2020) : 316–24. http://dx.doi.org/10.1515/ijmr-2020-1110407.
Texte intégralWang, Bin, Hong Yan Zhang, Fang Fei Dong et Tian Yu Zhu. « Self-Piercing Riveting Process Simulation of Joining Aluminium Alloy Sheets ». Advanced Materials Research 499 (avril 2012) : 67–71. http://dx.doi.org/10.4028/www.scientific.net/amr.499.67.
Texte intégralPillajo, C., A. Melo, F. Neto, J. Casanova, M. M. da S. Paula, J. Anglada-Rivera, J. H. L. Silva, R. S. Silva, L. Aguilera et Y. Leyet. « Shorter and efficient heat treatment parameters for 6061/6063 aluminium alloys ». Canadian Metallurgical Quarterly 60, no 4 (2 octobre 2021) : 359–65. http://dx.doi.org/10.1080/00084433.2021.2014724.
Texte intégralKhan, Md Faseeulla, Gaurav Sharma et D. K. Dwivedi. « Weld-bonding of 6061 aluminium alloy ». International Journal of Advanced Manufacturing Technology 78, no 5-8 (17 décembre 2014) : 863–73. http://dx.doi.org/10.1007/s00170-014-6670-1.
Texte intégralZhang, Zheng, Jin Ping Zhuang, Xue Chao Chen et Zhi Bin Wang. « Analysis on In-Plane Seismic Performance of Aluminium Beams under Cyclic Bending ». Advanced Materials Research 1049-1050 (octobre 2014) : 365–68. http://dx.doi.org/10.4028/www.scientific.net/amr.1049-1050.365.
Texte intégralZhang, Zheng, Yong Qian Zheng, Xue Chao Chen et Zhi Bin Wang. « Finite Element Analysis on Hysteretic Behavior of Aluminium Columns under Cyclic Loading ». Advanced Materials Research 1049-1050 (octobre 2014) : 264–67. http://dx.doi.org/10.4028/www.scientific.net/amr.1049-1050.264.
Texte intégralSuhail Nazir Wani et Munish Baboria. « A critical analysis of collision dynamics pertaining to aluminum micro particles on aluminium 6061 alloy substrate in cold spray additive manufacturing process ». International Journal of Science and Research Archive 8, no 1 (30 janvier 2023) : 119–30. http://dx.doi.org/10.30574/ijsra.2023.8.1.0354.
Texte intégralKaliappan, S., A. Shanmugam, Pradeep Johnson, M. Karthick, S. Sekar, Pravin P. Patil, M. K. S. Sai, K. P. Yuvaraj et Venkatesan Govindaraajan. « Impact of AlN-SiC Nanoparticle Reinforcement on the Mechanical Behavior of Al 6061-Based Hybrid Composite Developed by the Stir Casting Route ». Advances in Materials Science and Engineering 2022 (25 août 2022) : 1–8. http://dx.doi.org/10.1155/2022/1399618.
Texte intégralBraun, Reinhold. « Investigation on Microstructure and Corrosion Behaviour of 6XXX Series Aluminium Alloys ». Materials Science Forum 519-521 (juillet 2006) : 735–40. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.735.
Texte intégralSolay, Anand S., et B. Mohan. « An ANN Approach in Prediction of Microhardness in a Furnace Cooled Sintered P/M 6061 Aluminium Compacts ». Advanced Materials Research 548 (juillet 2012) : 258–63. http://dx.doi.org/10.4028/www.scientific.net/amr.548.258.
Texte intégralLesmana, Sigit Dwi, Mulianti Mulianti, Delima Yanti Sari et Andril Arafat. « ANALISA KEKUATAN IMPACT PADA ALUMINIUM 6061 DENGAN VARIASI LAPISAN SERAT KARBON APLIKASI KERANGKA MOBIL LISTRIK ». Jurnal Vokasi Mekanika (VoMek) 3, no 1 (5 février 2021) : 52–59. http://dx.doi.org/10.24036/vomek.v3i1.183.
Texte intégralPratama, Indra, et Muhammad Akhlis Rizza. « PENGARUH PARAMETER PEMOTONGAN PADA PROSES FRAIS TERHADAP KEKASARAN PERMUKAAN MATERIAL ALUMINIUM 6061 ». Jurnal Teknik Ilmu Dan Aplikasi 2, no 2 (7 juin 2022) : 49–56. http://dx.doi.org/10.33795/jtia.v2i2.63.
Texte intégralZhang, Zheng, Xue Chao Chen, Yong Chao Ma et Zhi Bin Wang. « Analysis on Out-of-Plane Seismic Stability Performance of Aluminium Beams under Cyclic Bending ». Advanced Materials Research 1049-1050 (octobre 2014) : 369–73. http://dx.doi.org/10.4028/www.scientific.net/amr.1049-1050.369.
Texte intégralZaiedah Nasir, Nurulhilmi, Mohd Ahadlin Mohd Daud, Mohd Zulkefli Selamat, Ahmad Rivai et Sivakumar Dhar Malingam. « The Effect of Heat Treatment on Fatigue and Mechanical Properties of 6061 Aluminium Alloy ». Applied Mechanics and Materials 699 (novembre 2014) : 227–32. http://dx.doi.org/10.4028/www.scientific.net/amm.699.227.
Texte intégralSidik, Jaelani. « PENGARUH VARIASI TEMPERATUR PERLAKUAN PANAS AGING TERHADAP SIFAT MEKANIK ALUMINIUM AA 6061 ». T R A K SI 19, no 1 (19 novembre 2019) : 1. http://dx.doi.org/10.26714/traksi.19.1.2019.1-8.
Texte intégralBataineh, Omar, et Mohammad Smadi. « Using Artificial Neural Networks to Predict Hardness and Impact Toughness of Aluminum Alloy 6061-T6 ». Materials Science Forum 1079 (26 décembre 2022) : 3–13. http://dx.doi.org/10.4028/p-3l7vo5.
Texte intégralWibawa, Lasinta Ari Nendra, et Dwi Aries Himawanto. « ANALISIS KETAHANAN BEBAN DINAMIS MATERIAL TURBIN ANGIN TERHADAP KECEPATAN PUTAR ROTOR (RPM) MENGGUNAKAN METODE ELEMEN HINGGA ». Simetris : Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 9, no 2 (20 novembre 2018) : 803–8. http://dx.doi.org/10.24176/simet.v9i2.2343.
Texte intégralPetre, Marin, Cristian Dinu, Nicuşor Constantin Drăghici et Valeriu Andrei. « Prediction of the residual stress after quenching of 6061 aluminium alloy plates by using mathematical modelling ». ITM Web of Conferences 34 (2020) : 02007. http://dx.doi.org/10.1051/itmconf/20203402007.
Texte intégralSitorus, Fransnazoan, Armasyah Ginting et Basuki Wirjosentono. « Penyelidikan Karakteristik Lapisan Diamond Film Pahat Karbida Terhadap Pembebanan Mekanik Pada Pembubutan Kering ». Jurnal Inotera 1, no 1 (27 juillet 2017) : 32. http://dx.doi.org/10.31572/inotera.vol1.iss1.2016.id6.
Texte intégralTakahashi, Yoshimasa, Hiroaki Yoshitake, Takahiro Shikama, Hiroshi Noguchi et Masanori Takuma. « Giga-Cycle Property of a New Age-Hardened Aluminium Alloy Containing Excess Solute Magnesium ». Key Engineering Materials 577-578 (septembre 2013) : 293–96. http://dx.doi.org/10.4028/www.scientific.net/kem.577-578.293.
Texte intégralA. Asseala, S., Badr M. Abd El-Bary et A. M. Khourshid. « EROSION-CORROSION BEHAVIOUR OF 6061 ALUMINIUM ALLOY ». ERJ. Engineering Research Journal 27, no 1 (1 janvier 2004) : 9–14. http://dx.doi.org/10.21608/erjm.2004.82600.
Texte intégralLuster, J. W., M. Thumann et R. Baumann. « Mechanical properties of aluminium alloy 6061–Al2O3composites ». Materials Science and Technology 9, no 10 (octobre 1993) : 853–62. http://dx.doi.org/10.1179/mst.1993.9.10.853.
Texte intégralPRAMANIK, A., A. K. BASAK, M. N. ISLAM et G. LITTLEFAIR. « Electrical discharge machining of 6061 aluminium alloy ». Transactions of Nonferrous Metals Society of China 25, no 9 (septembre 2015) : 2866–74. http://dx.doi.org/10.1016/s1003-6326(15)63912-7.
Texte intégralC K, Mr Arun, et Prof Divya K K. « Investigation on Buckling Behaviour of RC Rectangular Long Column Confined with Aluminium Mesh ». International Journal for Research in Applied Science and Engineering Technology 11, no 4 (30 avril 2023) : 746–53. http://dx.doi.org/10.22214/ijraset.2023.50178.
Texte intégralDu Toit, Madeleine, et Kalenda Mutombo. « The influence of pulsed gas metal arc welding on the fatigue and corrosion-fatigue properties of wrought aluminium 6061-T651 ». Anti-Corrosion Methods and Materials 66, no 6 (4 novembre 2019) : 719–29. http://dx.doi.org/10.1108/acmm-01-2019-2065.
Texte intégralTripathi, Harshit, Rajvir Singh, Sushil Kumar, J. D. Sharma et Sumit Bhardwaj. « An Investigation of Mechanical Properties by Reinforcing Steel Mesh into Aluminium Alloy 6061 ». IOP Conference Series : Materials Science and Engineering 1219, no 1 (1 janvier 2022) : 012027. http://dx.doi.org/10.1088/1757-899x/1219/1/012027.
Texte intégralHussain, Nur Fadzila, D. Sivakumar, Mohd Ahadlin bin Daud, Sivaraos et Mohd Zulkefli Selamat. « Study of Interfacial Shear of Aluminium/Oil Palm Empty Fruit Bunch Fiber Reinforced Polypropylene Fiber Metal Laminates ». Applied Mechanics and Materials 789-790 (septembre 2015) : 131–35. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.131.
Texte intégralShaari, Mohd Rafiza, Zuhailawati Hussain, Indra Putra Almanar et Nguyen Van Thuong. « Comparison of Friction Stir and Tungsten Inert Gas Weldments of AA6061-T6 ». Advanced Materials Research 858 (novembre 2013) : 19–23. http://dx.doi.org/10.4028/www.scientific.net/amr.858.19.
Texte intégralHe, Ting, Wei Shi, Song Xiang, Chaowen Huang et Ronald G. Ballinger. « Influence of Aging on Corrosion Behaviour of the 6061 Cast Aluminium Alloy ». Materials 14, no 8 (7 avril 2021) : 1821. http://dx.doi.org/10.3390/ma14081821.
Texte intégralMuthazhagan, Chinnasamy, A. Gnanavelbabu, G. B. Bhaskar et K. Rajkumar. « Influence of Graphite Reinforcement on Mechanical Properties of Aluminum-Boron Carbide Composites ». Advanced Materials Research 845 (décembre 2013) : 398–402. http://dx.doi.org/10.4028/www.scientific.net/amr.845.398.
Texte intégralMartijanti et Syahminan. « Pengaruh Variasi Jenis Logam Pengisi pada Pengelasan Alumunium 6061-T4 dengan Proses GTAW terhadap Sifat Mekanik ». Jurnal Teknik : Media Pengembangan Ilmu dan Aplikasi Teknik 6, no 1 (1 septembre 2020) : 479–86. http://dx.doi.org/10.26874/jt.vol6no1.266.
Texte intégralMaganti, Naga Venkata Ramesh, et Ravikanth Raju Potturi. « Investigation on Mechanical and Machinability Properties of Aluminium Metal Matrix Composite Reinforced with Titanium Oxide (TiO2) and Graphite (Gr) Particles ». Trends in Sciences 20, no 11 (25 août 2023) : 5682. http://dx.doi.org/10.48048/tis.2023.5682.
Texte intégralB E, Chandan Gowda. « Experimental Investigation on Zirconia Reinforced Aluminium 6061 Metal Matrix Composite ». International Journal for Research in Applied Science and Engineering Technology 10, no 7 (31 juillet 2022) : 3311–18. http://dx.doi.org/10.22214/ijraset.2022.45691.
Texte intégralVijayakumar, R., C. Ramesh, R. Boobesh, R. Ram Surya et P. Souder Rajesh. « Investigation on automobile wheel rim aluminium 6061 and 6066 Alloys using ANSYS WORKBENCH ». Materials Today : Proceedings 33 (2020) : 3155–59. http://dx.doi.org/10.1016/j.matpr.2020.03.798.
Texte intégralDOSSOU, FAUSTIN, et RAYNALD GAUVIN. « THE CORRELATION BETWEEN THE FRACTAL DIMENSION OF FRACTURED SURFACES AND MECHANICAL PROPERTIES OF 6061/Al2O3/10-20%p ». Fractals 02, no 02 (juin 1994) : 249–52. http://dx.doi.org/10.1142/s0218348x94000272.
Texte intégralSeptiawan, Diama Rizky, Wijoyo Wijoyo, Alfian Wahyu Nugroho et Mansyur Abdul Shaleh. « Pengaruh Variasi Bentuk Pin pada Friction Stir Welding terhadap Sifat Mekanik Sambungan Las Beda Materail antara Al 6061 – Al 5083 ». Creative Research in Engineering (CERIE) 3, no 2 (28 juillet 2023) : 93. http://dx.doi.org/10.30595/cerie.v3i2.17522.
Texte intégralSandhanshiv, Rahul D., et Dilip M. Patel. « Synthesis and Characterization of Novel Nickel Coated Carbon Fibre Rod Reinforced Aluminium Metal Matrix Composite Material for using in Automobile Application ». Advanced Engineering Forum 46 (28 juin 2022) : 1–14. http://dx.doi.org/10.4028/p-ik37iv.
Texte intégralYu, Peng, Ma Qian, Dacian Tomus, Craig A. Brice, Graham B. Schaffer et Barry C. Muddle. « Electron Beam Processing of Aluminium Alloys ». Materials Science Forum 618-619 (avril 2009) : 621–26. http://dx.doi.org/10.4028/www.scientific.net/msf.618-619.621.
Texte intégral