Littérature scientifique sur le sujet « ALUMINIUM 6061 »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « ALUMINIUM 6061 ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "ALUMINIUM 6061"
Pranav, Domadala, Sruthi Sivaram, Mukesh Nadarajan et Ashish Selokar. « Behaviour of Heat Treated Aluminium Alloy under Hardness Test ». Applied Mechanics and Materials 903 (avril 2021) : 99–105. http://dx.doi.org/10.4028/www.scientific.net/amm.903.99.
Texte intégralHaga, Toshio, Hideki Inui, Ryoji Nakamura, Shinji Kumai et Hisaki Watari. « Strip Casting of 6061 and Recycled 6061 Alloy by an Unequal Diameter Twin Roll Caster ». Advanced Materials Research 264-265 (juin 2011) : 1911–16. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.1911.
Texte intégralWang, You Bin, et Jian Min Zeng. « The Effects of Mn Addition on Microstructure and Properties in 6061 Aluminium Alloy ». Advanced Materials Research 399-401 (novembre 2011) : 1838–42. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.1838.
Texte intégralKou, L. Y., W. Y. Zhao, X. Y. Tuo, G. Wang et C. R. Sun. « Effect of stress triaxiality on fracture failure of 6061 aluminium alloy ». Journal of Mechanical Engineering and Sciences 14, no 2 (23 juin 2020) : 6961–70. http://dx.doi.org/10.15282/jmes.14.2.2020.33.0545.
Texte intégralAb Rahim, Syaiful Nizam, et Mohd Amri Lajis. « Effects on Mechanical Properties of Solid State Recycled Aluminium 6061 by Extrusion Material Processing ». Key Engineering Materials 730 (février 2017) : 317–20. http://dx.doi.org/10.4028/www.scientific.net/kem.730.317.
Texte intégralRinderer, Barbara. « The Metallurgy of Homogenisation ». Materials Science Forum 693 (juillet 2011) : 264–75. http://dx.doi.org/10.4028/www.scientific.net/msf.693.264.
Texte intégralPradani, Yayi Febdia, Mochamad Sulaiman et Saiful Hardiyanto. « ANALISIS TINGKAT KEKERASAN ALUMINIUM 6061 BERDASARKAN VARIASI MEDIA PENDINGIN PADA PROSES PACK CARBURIZING ». Steam Engineering 2, no 1 (1 septembre 2020) : 1–10. http://dx.doi.org/10.37304/jptm.v2i1.1663.
Texte intégralLuo, Daming, Fan Li et Guohua Xing. « Corrosion resistance of 6061-T6 aluminium alloy and its feasibility of near-surface reinforcements in concrete structure ». REVIEWS ON ADVANCED MATERIALS SCIENCE 61, no 1 (1 janvier 2022) : 638–53. http://dx.doi.org/10.1515/rams-2022-0048.
Texte intégralLubis, M. Sobron Yamin, Abrar Riza et Dani Putra Agung. « PENGARUH PARAMETER PEMESINAN TERHADAP KEKASARAN PERMUKAAN MATERIAL ALUMINIUM 6061 DAN 7075 PADA PROSES SEKRAP ». Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan 4, no 1 (1 juin 2020) : 145. http://dx.doi.org/10.24912/jmstkik.v4i1.3414.
Texte intégralKareem, Ansar, Jaber Abu Qudeiri, Asarudheen Abdudeen, Thanveer Ahammed et Aiman Ziout. « A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting ». Materials 14, no 1 (1 janvier 2021) : 175. http://dx.doi.org/10.3390/ma14010175.
Texte intégralThèses sur le sujet "ALUMINIUM 6061"
Wiest, Anthony D. « Thermal cycling behavior of unidirectional and cross-plied P100 Gr/6061 aluminium composites ». Thesis, Monterey, California. Naval Postgraduate School, 1992. http://hdl.handle.net/10945/24071.
Texte intégralThe thermal strain response of as-cast samples of 40% PI 00 graphite fiber reinforced 6061 Al composites in the unidirectionally reinforced and the [0/90] cross-plied configuration was studied. Thermal strain hysteresis and residual plastic strain were observed, both changing with continued cycling. The compressive residual plastic strain is attributable primarily to creep deformation due to compressive residual stress in the matrix at elevated temperature. The role of matrix creep in the heating rate dependence of the strain response was studied by measuring strains under isothermal conditions in the absence of applied stresses. Damage mechanisms operative in the composites during thermal cycling, and the impact of ply constraint on the strain response were also evaluated.
Salvo, Luc. « Comportement au durcissement structural de matériaux composites à matrice aluminium renforcée de particules céramiques : cas des systèmes 6061/SIC et 6061/Al2O3 ». Grenoble INPG, 1992. http://www.theses.fr/1992INPG0064.
Texte intégralRekik, Wissal. « Etude de la ténacité d'une soudure en undermatch : Application à la tenue mécanique de la jonction soudée FE en Al 6061-T6 ». Thesis, Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique, 2016. http://www.theses.fr/2016ESMA0015/document.
Texte intégralFor the demonstration of the integrity of the most sensitive nuclear components, conventional defects, as cracks for example, must be considered within the design step as required by the nuclear safety authority. This phase is particularly crucial for dimensioning of welded structures. To ensure a conservative prediction, the position of the initial crack within the welded joint must be the most detrimental in fracture behavior. Commonly used analyzes consider homogeneous structure with the behavior of the base metal of the welded joint, considered as the weakest metallurgical zone in the case of an overmatched weld. In contrast, similar analysis is not conservative in case of undermatched weld. The thesis contributes by the development of an experimental and numerical methodology allowing the identification of the detrimental metallurgical zone in fracture behavior of an undermatched welded joint. The methodology proposed is applied to an electron beam welded joint on Al 6061-T6. To reach this goal, the gradient of the mechanical behavior along the welded joint was first identified. This is particularly interesting to conduct an advanced analysis based on a multimaterial approach. In a second step, the fracture behavior of the welded joint was studied on CT specimen. The transferability of the J integral at initiation was approved on another geometry: this represents an important foundation for the transferability assumption to structure. Finally, a numerical analysis on full scale tube was developed. Residual welding stresses and structural effects were considered. The results demonstrate that the heat affected zone located at 13 mm from the middle of the welded joint is the most detrimental zone for fracture analysis. This contradicts the conventional methods conducted on fracture analysis which consider a conventional defect within the fusion zone
Béal, Maxime. « Compréhension et maîtrise de la mise en œuvre par fabrication additive (LPBF) d'un alliage d'aluminium à basse teneur en silicium pour l'aéronautique ». Electronic Thesis or Diss., Ecully, Ecole centrale de Lyon, 2022. http://www.theses.fr/2022ECDL0026.
Texte intégralAdditive manufacturing is becoming more and more mature and has shown its capacity to be a disruptive technology in terms of industrial innovation. Indeed, additive manufacturing allows to obtain a functional part from a 3D file. Laser Powder Bed Fusion (LPBF) is one of the additive manufacturing processes. Thales® is very interested in this type of process and would like to develop LPBF to increase its competitiveness in the aeronautical market. An aluminium alloy has been developed for the LPBF process and patented by Thales in 2019. The objective of the thesis work presented in this manuscript is to continue the work carried out on this alloy and to facilitate the industrialisation process of this alloy by the LPBF process for aeronautical and aerospace parts. The manuscript is divided into 4 parts, the first one focusing on the bibliography and the methods used. The second part deals with laser-material interaction and roughness optimisation. Part three deals with the life cycle of the powder by analysing the effect of reuse and storage on the process. Finally, the fourth and last part focuses on the optimisation of the chemical composition of the alloy and the search for a suitable heat treatment. The optimisation of the laser interaction showed the relationship between the parameters used and the geometry of the molten pool formed. It was also shown that it was harder to use the 6061-Zr alloy than a cast aluminium alloy such as Al-Si alloy. This chapter also highlighted the focal shift phenomenon and the importance of the plate altitude which has a strong impact on the process. Subsequently, a roughness optimisation was carried out by applying contours. A very good surface finish was obtained, however, this method was tested on more complex geometries than cubes and showed its weaknesses. The life cycle of the powder was then discussed. The reuse of the powder leads to an increase in oxygen content and chemical modification of the powder. Sieving is essential to ensure particle size and avoid these phenomena. The storage of powders is critical for the intended applications. Indeed, storage as carried out in this study has shown a strong impact on the process reducing the density, elongation and resilience of the parts while degrading the surface finish. As the patent for 6061-Zr is quite broad, the zirconium content was optimised to meet the specifications as much as possible while avoiding hot cracking. Subsequently, heat treatments were applied to alloys with different levels of Zirconium in order to observe the impact of these treatments as a function of temperature, duration and the level of Zirconium content. All of these results helped to remove scientific obstacles and thus facilitate the progression of this technology into controlled industrialisation for aeronautical and space applications
Shen, Yang. « Comportement et endommagement des alliages d’aluminium 6061-T6 : approche micromécanique ». Thesis, Paris, ENMP, 2012. http://www.theses.fr/2012ENMP0089/document.
Texte intégralThe AA6061-T6 aluminum alloy was chosen as the material for the core vessel of the future Jules Horowitz testing reactor (JHR). The objective of this thesis is to understand and model the tensile and fracture behavior of the material, as well as the origin of damage anisotropy. A micromechanical approach was used to link the microstructure and mechanical behavior. The microstructure of the alloy was characterized on the surface via Scanning Electron Microscopy and in the 3D volume via synchrotron X-ray tomography and laminography. The damage mechanism was identified by in-situ SEM tensile testing, ex-situ X-ray tomography and in-situ laminography on different levels of triaxiality. The observations have shown that damage nucleated at lower strains on Mg2Si coarse precipitates than on iron rich intermetallics. The identified scenario and the in-situ measurements were then used to develop a coupled GTN damage model incorporating nucleation, growth and coalescence of cavities formed by coarse precipitates. The relationship between the damage and the microstructure anisotropies was explained and simulated
Flament, Camille. « Etude des évolutions microstructurales sous irradiation de l'alliage d'aluminium 6061-T6 ». Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAI074/document.
Texte intégralThe 6061-T6 Aluminium alloy, whose microstructure contains Al(Fe,Mn,Cr)Si dispersoids and hardening needle-shaped beta” precipitates (Mg, Si), has been chosen as the structural material for the core vessel of the Material Testing Jules Horowitz Nuclear Reactor. Because it will be submitted to high neutron fluxes at a temperature around 50°C, it is necessary to study microstructural evolutions induced by irradiation and especially the stability of the second phase particles. In this work, analytical studies by in-situ and ex-situ electron and ion irradiations have been performed, as well as a study under neutron irradiation. The precipitates characterization by Transmission Electron Microscopy demonstrates that Al(Fe,Mn,Cr)Si dispersoids are driven under irradiation towards their equilibrium configuration, consisting of a core/shell structure, enhanced by irradiation, with a (Fe, Mn) enriched core surrounded by a Cr-enriched shell. In contrast, the (Mg,Si) beta” precipitates are destabilized by irradiation. They dissolve under ion irradiation in favor of a new precipitation of (Mg,Si,Cu,Cr,Al) rich clusters resulting in an increase of the alloy’s hardness. beta’’ precipitates tend towards a transformation to cubic precipitates under neutron irradiation
Benoit, Alexandre. « Développement du soudage MIG CMT pour la réparation de pièces aéronautiques. Application aux pièces en alliage base aluminium 6061 ». Thesis, Paris 11, 2012. http://www.theses.fr/2012PA112308/document.
Texte intégralThis study responds to an industrial demand of repair using an arc welding process. It concerns an aeronautical piece made in 6061 aluminium alloy. The first part of the study is devoted to the comparison of processes Metal Inert Gas (MIG), pulsed MIG, Tungsten Inert Gas and MIG Cold Metal Transfer (CMT). It is the latter process that was selected for its special abilities, such as its good control of parameters and the low damaging produced in the base metal. Then, two filler alloys were tested – 5356 and 6061 aluminium alloys– with two repairing strategies : welding and building up. The results of mechanical tests showed that building up with aluminum 5356 is most suitable option for this application. The trials on the real piece showed the relevance of this approach.The heat affected zone generated by the arc welding process in the 6061 base metal was also characterized. It was shown a varaition of microstructure associated with the change of mechanical properties in this zone. Finally, exploratory trials of homogeneous arc welding, i.e., with the 6061 filler alloy showed that it was possible, with certain conditions, to weld without generating weld cracking, although, this aluminium is deemed unweldable by this way
Jalali, Alireza. « Performance of minimum quantity cooling (MQC) when turning aluminium alloy 6061-T6 : surface roughness, tool temperature and aerosol emission ». Mémoire, École de technologie supérieure, 2013. http://espace.etsmtl.ca/1206/1/JALALI_Alireza.pdf.
Texte intégralPetit, Tom. « Compréhension et modélisation d’essais de ténacité avec pop-in : application à l’aluminium 6061-T6 et influence de l’irradiation neutronique ». Thesis, Paris Sciences et Lettres (ComUE), 2018. http://www.theses.fr/2018PSLEM019/document.
Texte intégralPop-in is a phenomenon of crack propagation instability observed during toughness tests on some materials. This phenomenon has been observed on the 6061-T6 aluminum alloy, which has been identified as an essential structural element of the core of the Jules Horowitz research reactor. This thesis was initiated to understand the origin of this phenomenon on 6061-T6 aluminum and to propose a physics-based modeling, usable for the exploitation and interpretation of toughness tests, especially in the irradiated state.The different origins identified in the literature have been experimentally tested. Different aging times (4/8/12/16h) were applied to obtain different mechanical behaviors. Tensile tests with image correlation have shown that the observed pop-ins are not due to a PLC effect. Nor do they correspond to microstructural heterogeneity; they are not linked to different fracture mechanisms, because the rupture is typically ductile, whether a pop-in is involved or not. These mechanisms and the different microstructures were compared using several techniques (SEM, EBSD, EDS, Atom Probe Tomography, tomography, synchrotron laminography and nanolaminography). Pop-ins are therefore only the result of an acceleration of the ductile fracture.In fact, they are due to an interaction between two parameters: the reduced material crack growth toughness (i.e. the low tearing modulus), and the significant compliance of the test device (i.e. the low stiffness). In order to investigate this second parameter, an innovative setup has been designed to vary the machine stiffness during toughness tests. Two analytical criteria, one based on the load-opening curve, the other on the J-integral, have been established, making it possible to reliably quantify the conditions for initiation and arrest of pop-in.To take into account the central role of hardening for ductile propagation, a new stress-controlled nucleation criterion has been introduced into a single GTN model. This makes it possible to simulate and capture by finite elements the various J-Δa toughness curves by modifying only the elastoplastic law. By adding springs in the models and with an adapted control, the pop-ins are successfully simulated, and remain exploitable with the analytical criteria.Studies on irradiated specimens carried out in hot cells have shown that the increase in pop-ins with irradiation results from the decrease in the tearing modulus, itself due to hardening. As in the non-irradiated state, pop-ins thus appear solely because of the interaction between the tearing modulus and the test device stiffness, and not because of a range of industrial development not mastered
Arshad, Saad. « Single Point Incremental Forming : A study of Forming Parameters, Forming limits and Part accuracy of Aluminium 2024, 6061 and 7475 alloys ». Thesis, KTH, Industriell produktion, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103006.
Texte intégralLivres sur le sujet "ALUMINIUM 6061"
Wiest, Anthony D. Thermal cycling behavior of unidirectional and cross-plied P100 Gr/6061 aluminium composites. Monterey, Calif : Naval Postgraduate School, 1992.
Trouver le texte intégralHafley, Johanna L. A comparison of the aging kinetics of a cast alumina-6061 aluminum composite and a monolithic 6061 aluminum alloy. Monterey, Calif : Naval Postgraduate School, 1989.
Trouver le texte intégralS, Tompkins Stephen, et United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., dir. Effects of thermal cycling on graphite-fiber-reinforced 6061 aluminum. [Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.
Trouver le texte intégralS, Tompkins Stephen, et United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., dir. Effects of thermal cycling on graphite-fiber-reinforced 6061 aluminum. [Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.
Trouver le texte intégralSchauder, Thomas J. The effects of thermomechanical processing parameters on elevated temperature behavior of a 6061 Al-Al2O3 metal matrix composite. Monterey, Calif : Naval Postgraduate School, 1992.
Trouver le texte intégralJones, S. J. The influence of homogenisation treatment and manganese content on the aluminium-iron-silicon intermetallics in 6063 aluminium alloys. Manchester : UMIST, 1994.
Trouver le texte intégralElkin, Leslie R. Corrosion mechanisms and behavior of a P-130x Gr/6063 A1 composite in aqueous environments. Monterey, California : Naval Postgraduate School, 1990.
Trouver le texte intégralKing, Joel David. Characterization of the corrosion of a P-130x graphite fiber reinforced 6063 aluminum metal matrix composite. Monterey, Calif : Naval Postgraduate School, 1989.
Trouver le texte intégralComparison of Friction Stir Welding and Friction Stir Processing Using Aluminium Alloy 6061 and Aluminium Alloy 6063. Karur, India : ASDF International, 2017.
Trouver le texte intégralMicrostructure and Mechanical Properties of Aluminium Alloy 6061 Reinforced Glass. Tiruchengode, India : ASDF International, 2017.
Trouver le texte intégralChapitres de livres sur le sujet "ALUMINIUM 6061"
Couper, M. J., M. Cooksey et B. Rinderer. « Effect of Homogenisation Temperature and Time on Billet Microstructure and Extruded Properties of Alloy 6061 ». Dans Aluminium Cast House Technology, 286–96. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118806364.ch29.
Texte intégralJha, A. K., S. V. Prasad et G. S. Upadhyaya. « Activated Sintered 6061 Aluminium Alloy Particulate Composites Containing Coated Graphite ». Dans Controlled Interphases in Composite Materials, 829–40. Dordrecht : Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-7816-7_80.
Texte intégralFriend, C., R. Young et I. Horsfall. « Heat-Treatment Effects in δ -Alumina Fibre Reinforced Aluminium Alloy 6061 ». Dans Developments in the Science and Technology of Composite Materials, 227–32. Dordrecht : Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1123-9_31.
Texte intégralKhan, Mahmood, Rafi Ud-Din, Abdul Wadood, Wilayat Husain Syed, Shahid Akhtar et Ragnhild Elizabeth Aune. « Spark Plasma Sintering of Graphene Nanoplatelets Reinforced Aluminium 6061 Alloy Composites ». Dans Light Metals 2020, 301–11. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36408-3_44.
Texte intégralAleem Pasha, Md, P. Ravinder Reddy, P. Laxminarayana et Ishtiaq Ahmed Khan. « SiC and Al2O3 Reinforced Friction Stir Welded Joint of Aluminium Alloy 6061 ». Dans Lecture Notes on Multidisciplinary Industrial Engineering, 163–82. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0378-4_7.
Texte intégralGiglio, M., A. Gilioli et A. Manes. « Mechanical Behaviour of Al 6061-T6 Aluminium Alloy Under Large Strain and Failure ». Dans Advanced Structured Materials, 143–71. Berlin, Heidelberg : Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-54258-9_7.
Texte intégralArun Kumar, S., et R. Raman Goud. « Processing and Characterization of 6061 Aluminium Alloy with Nickel (Ni) and Zirconium (Zr) ». Dans Lecture Notes in Mechanical Engineering, 353–61. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7557-0_31.
Texte intégralGupta, Arnav, V. P. Yashvanth et Lokavarapu Bhaskara Rao. « Design of Gears Using Aluminium 6061-T6 Alloy for Formula SAE Steering System ». Dans Lecture Notes in Mechanical Engineering, 489–505. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7557-0_41.
Texte intégralArunkumar, T., K. Aditya Sreevatsa, Dinesh R. Krishnan et Ram Subbiah. « Corrosion Behaviour of Aluminium 6061/MWCNT Composite Prepared by Double Stir Casting Method ». Dans Lecture Notes in Mechanical Engineering, 293–99. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0909-1_29.
Texte intégralWang, Xiangjie, Qingmei Ma, Gang Sun et Jianzhong Cui. « Effects of Electromagnetic Field on Horizontal Continuous Casting of 6061 Aluminium Alloy Bar Process ». Dans PRICM, 1035–40. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch126.
Texte intégralActes de conférences sur le sujet "ALUMINIUM 6061"
Yasin, J., et M. Kumaresan. « Effect of silicon carbide and aluminium oxide in mechanical properties of aluminium alloy 6061 ». Dans RECENT TRENDS IN SCIENCE AND ENGINEERING. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0074175.
Texte intégralMarzbanrad, Bahareh, Ehsan Marzbanrad et Hamid Jahed. « Cold Spray Deposition of Aluminium 6061 Decorated with Al2O3 Nanoparticles ». Dans ITSC 2023. ASM International, 2023. http://dx.doi.org/10.31399/asm.cp.itsc2023p0574.
Texte intégralVerma, Rajesh P., KN Pandey, Nitin Kumar et Saim Saleem. « Welding Process to Produce 6061-T6 Aluminium Alloy Butt Joint ». Dans 5th International Congress on Computational Mechanics and Simulation. Singapore : Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-1139-3_033.
Texte intégralKrishnakumar, D., R. Venkatachalam, R. Rameshkumar et V. Anadakrishnan. « Synthesis and characterization of aluminium 6061 with ZirSiO4 and graphite ». Dans PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING : ICRTMME 2019. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0024887.
Texte intégralManoj S. V., Madhusudana C. K., Manoj K. C., Manoj V. et Srinivas M. R. « Analysis on wear characteristics of aluminium 6061 reinforced with graphene ». Dans THE 8TH ANNUAL INTERNATIONAL SEMINAR ON TRENDS IN SCIENCE AND SCIENCE EDUCATION (AISTSSE) 2021. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0116947.
Texte intégralLoke, Kelvin, Richard Kwok, P. K. Koh, T. C. Lim et Philip Cheang. « Process-Property Correlation of Heat-Treated Aluminium 6061 Cold Spray Coatings ». Dans ITSC2015, sous la direction de A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen et C. A. Widener. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0155.
Texte intégralBenoit, A., P. Paillard, T. Baudin, S. Jobez, J. F. Castagné, Francisco Chinesta, Yvan Chastel et Mohamed El Mansori. « Evaluation Of Four Welding Arc Processes Applied To 6061 Aluminium Alloy ». Dans INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT2010). AIP, 2011. http://dx.doi.org/10.1063/1.3552556.
Texte intégralKumbhar, A. P., R. T. Vyavahare et S. G. Kulkarni. « Vibrational response and mechanical properties characterization of aluminium alloy 6061/Sic composite ». Dans PROCEEDINGS OF THE INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2017) : Metallurgy and Advanced Material Technology for Sustainable Development. Author(s), 2018. http://dx.doi.org/10.1063/1.5038715.
Texte intégralSalunkhe, Subodh, Balasaheb Gandhare et Swanand Kulkarni. « Manufacturing of Aluminum Alloy 6061 Composite Material using Bagasse Ash- Working Paper ». Dans National Conference on Relevance of Engineering and Science for Environment and Society. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.118.6.
Texte intégralPreethi, K., T. N. Raju et H. A. Shivappa. « Corrosion studies of aluminium-6061 metal matrix reinforced with multiwall carbon nanotubes composites ». Dans RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0069150.
Texte intégralRapports d'organisations sur le sujet "ALUMINIUM 6061"
Wong, C. R., O. Diehm et D. C. Van Aken. Damping Capacity of Aluminum 6061-Indium Alloys. Fort Belvoir, VA : Defense Technical Information Center, janvier 1990. http://dx.doi.org/10.21236/ada222802.
Texte intégralKuhn, Howard A. Atlas of Formability : Cast Aluminum 6061 Flow Stress Curves. Fort Belvoir, VA : Defense Technical Information Center, janvier 1991. http://dx.doi.org/10.21236/ada268301.
Texte intégralGOGOLSKI, JARROD. ALUMINUM ALLOY (6061-O, 5052-O, AND 1100) DISSOLUTION RATE TESTING. Office of Scientific and Technical Information (OSTI), août 2021. http://dx.doi.org/10.2172/1844189.
Texte intégralYahr, G. T. Prevention of non-ductile fracture in 6061-T6 aluminum nuclear pressure vessels. Office of Scientific and Technical Information (OSTI), juin 1995. http://dx.doi.org/10.2172/81049.
Texte intégralAlexander, D. J. The effect of irradiation on the mechanical properties of 6061-T651 aluminum. Office of Scientific and Technical Information (OSTI), décembre 1992. http://dx.doi.org/10.2172/10162906.
Texte intégralCorona, Edmundo, Christopher Laursen et Carter Fietek. Response of 304L stainless steel and 6061-T651 aluminum alloy at -40 C. Office of Scientific and Technical Information (OSTI), avril 2021. http://dx.doi.org/10.2172/1775054.
Texte intégralKuhn, Howard A. Atlas of Formability : Cast Aluminum 6063 Flow Stress Curves. Fort Belvoir, VA : Defense Technical Information Center, janvier 1991. http://dx.doi.org/10.21236/ada268303.
Texte intégralDike, J. J., J. A. Brooks, D. J. Bammann et M. Li. Thermal-mechanical modeling and experimental validation of weld solidification cracking in 6061-T6 aluminum. Office of Scientific and Technical Information (OSTI), décembre 1997. http://dx.doi.org/10.2172/304022.
Texte intégralD'Entremont, A., R. Fuentes, L. Olson et R. Sindelar. PREPARATION OF ALUMINUM OXIDE FILMS UNDER WATER EXPOSURE - PRELIMINARY REPORT ON 6061 SERIES ALLOYS. Office of Scientific and Technical Information (OSTI), septembre 2018. http://dx.doi.org/10.2172/1471991.
Texte intégrald'Entremont, Anna L., Roderick E. Fuentes, Luke C. Olson et Robert L. Sindelar. Preparation of Aluminum Oxide Films Under Water Exposure – Preliminary Report on 6061 Series Alloys. Office of Scientific and Technical Information (OSTI), septembre 2018. http://dx.doi.org/10.2172/1472000.
Texte intégral