Littérature scientifique sur le sujet « Alkali-activated materials (AAM) »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Alkali-activated materials (AAM) ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Alkali-activated materials (AAM)"
Kong, Lijuan, Zirui Fan, Wenchen Ma, Jiatao Lu et Yazhou Liu. « Effect of Curing Conditions on the Strength Development of Alkali-Activated Mortar ». Crystals 11, no 12 (25 novembre 2021) : 1455. http://dx.doi.org/10.3390/cryst11121455.
Texte intégralThomas, Shobha Elizabeth, S. Sreeja, A. Muhsin Lebba et K. P. Ramaswamy. « Effect of sucrose on slag-fly ash-based alkali activated paste ». IOP Conference Series : Earth and Environmental Science 1237, no 1 (1 septembre 2023) : 012003. http://dx.doi.org/10.1088/1755-1315/1237/1/012003.
Texte intégralBumanis, G., et D. Bajare. « Porous alkali activated materials with slow alkali release dynamic. Role of composition ». Materiales de Construcción 68, no 329 (7 février 2018) : 145. http://dx.doi.org/10.3989/mc.2018.14016.
Texte intégralLanjewar, Bhagyashri A., Ravijanya Chippagiri, Vaidehi A. Dakwale et Rahul V. Ralegaonkar. « Application of Alkali-Activated Sustainable Materials : A Step towards Net Zero Binder ». Energies 16, no 2 (15 janvier 2023) : 969. http://dx.doi.org/10.3390/en16020969.
Texte intégralJoseph, Shiju, Siva Uppalapati et Ozlem Cizer. « Instantaneous activation energy of alkali activated materials ». RILEM Technical Letters 3 (12 mars 2019) : 121–23. http://dx.doi.org/10.21809/rilemtechlett.2018.78.
Texte intégralLin, Chan-Yi, et Tai-An Chen. « Effects of Composition Type and Activator on Fly Ash-Based Alkali Activated Materials ». Polymers 14, no 1 (24 décembre 2021) : 63. http://dx.doi.org/10.3390/polym14010063.
Texte intégralFaridmehr, Iman, Moncef L. Nehdi, Mehdi Nikoo, Ghasan Fahim Huseien et Togay Ozbakkaloglu. « Life-Cycle Assessment of Alkali-Activated Materials Incorporating Industrial Byproducts ». Materials 14, no 9 (5 mai 2021) : 2401. http://dx.doi.org/10.3390/ma14092401.
Texte intégralThomas, Shobha Elizabeth, A. Muhsin Lebba, S. Sreeja et K. P. Ramaswamy. « Effect of borax in slag-fly ash-based alkali activated paste ». IOP Conference Series : Earth and Environmental Science 1237, no 1 (1 septembre 2023) : 012006. http://dx.doi.org/10.1088/1755-1315/1237/1/012006.
Texte intégralQin, Yongjun, Changwei Qu, Cailong Ma et Lina Zhou. « One-Part Alkali-Activated Materials : State of the Art and Perspectives ». Polymers 14, no 22 (21 novembre 2022) : 5046. http://dx.doi.org/10.3390/polym14225046.
Texte intégralAli, Barham. « Evaluation of Alkali-Activated Mortar Incorporating Combined and Uncombined Fly Ash and GGBS Enhanced with Nano Alumina ». Civil Engineering Journal 10, no 3 (1 mars 2024) : 902–14. http://dx.doi.org/10.28991/cej-2024-010-03-016.
Texte intégralThèses sur le sujet "Alkali-activated materials (AAM)"
Ševčík, Marek. « Vývoj kompozitů na bázi alkalicky aktivovaných matric odolných vůči působení extrémních teplot ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2021. http://www.nusl.cz/ntk/nusl-444262.
Texte intégralYildirim, G., A. Kul, E. Özçelikci, M. Sahmaran, A. Aldemir, D. Figueira et Ashraf F. Ashour. « Development of Alkali-Activated Binders froRecycled Mixed Masonry-originated Waste ». Elsevier, 2020. http://hdl.handle.net/10454/17960.
Texte intégralIn this study, the main emphasis is placed on the development and characterization of alkali-activated binders completely produced by the use of mixed construction and demolition waste (CDW)-based masonry units as aluminosilicate precursors. Combined usage of precursors was aimed to better simulate the real-life cases since in the incident of construction and demolition, these wastes are anticipated to be generated collectively. As different masonry units, red clay brick (RCB), hollow brick (HB) and roof tile (RT) were used in binary combinations by 75-25%, 50-50% and 25-75% of the total weight of the binder. Mixtures were produced with different curing temperature/periods and molarities of NaOH solution as the alkaline activator. Characterization was made by the compressive strength measurements supported by microstructural investigations which included the analyses of X-ray diffraction (XRD) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX). Results clearly showed that completely CDW-based masonry units can be effectively used collectively in producing alkali-activated binders having up to 80 MPa compressive strength provided that the mixture design parameters are optimized. Among different precursors utilized, HB seems to contribute more to the compressive strength. Irrespective of their composition, main reaction products of alkali-activated binders from CDW-based masonry units are sodium aluminosilicate hydrate (N-A-S-H) gels containing different zeolitic polytypes with structure ranging from amorphous to polycrystalline.
The full-text of this article will be released for public view at the end of the publisher embargo on 24 Jul 2021.
Reeb, Charles. « Synthèse et caractérisation de composites à base de matériaux alcali-activés incorporant des huiles minérales pour la gestion des huiles tritiées ». Electronic Thesis or Diss., Centrale Lille Institut, 2022. http://www.theses.fr/2022CLIL0020.
Texte intégralThis work deals with the conditioning of tritiated industrial oils in the context of nuclear wastes that are still deprived of an appropriate treatment solution. The strategy consists in directly conditioning model mineral oils in alkali-activated materials (AAM), additionally functionalized with a γ-MnO2/Ag2O hydrogen/tritium getter. Geopolymer (GEO) and alkali-activated blast furnace slag (AABFS) are considered as AAM. In the presence of surfactants, the oil was successfully emulsified (small and homogeneous droplets) in both types of AAM. Two surfactant mechanisms are distinguished acting by: 1) decreasing the interfacial tension or 2) promoting oil-particles interactions. Mechanism 1 should be favored if workability of fresh mixtures is required, while mechanism 2 should be targeted to provide a better confinement of oil owing to strong oil-particles interactions. After curing, AAM-OIL composites are obtained. There is no influence of the oil and surfactants on the setting time and strength development of AAM. The main reaction products (C-A-S-H in AABFS and N-A-S-H in GEO) are not impacted. However, the addition of surfactants leads to increased porosity of AAM due to air bubbles stabilization. AAM-OIL composites immobilizing 20%vol. of oil all have compressive strengths higher than 20 MPa, which is a more than the 8 MPa required from ANDRA. Overall, according to both fresh and hardened states observations, GEO exhibit higher performances for the immobilization of oil than AABFS. The efficiency of the γ-MnO2/Ag2O getter was assessed in AAM via in-situ hydrogen production by gamma irradiations or magnesium corrosion. Both types of experiments agree to the higher performances of the getter in GEO than in AABFS. This is explained by reducing sulfur species present in AABFS, which react with the oxidizing getter components. Finally, wetting measurements demonstrated that industrial oils have an excellent affinity for GEO, testifying that long-term water seepage is not likely to dislodge them from GEO-OIL composites. In the context of nuclear waste management, GEO functionalized with γ-MnO2/Ag2O getter appears as a promising option for disposal of tritiated oils. However, additional investigations of HTO confinement need to be performed that could renew the interest of using AABFS
Livres sur le sujet "Alkali-activated materials (AAM)"
Provis, John L., et Jannie S. J. van Deventer. Alkali Activated Materials : State-Of-the-Art Report, Rilem Tc 224-Aam. Springer, 2016.
Trouver le texte intégralProvis, John, et Jannie S. J. van Deventer. Alkali Activated Materials : State-Of-the-Art Report, RILEM TC 224-AAM. Springer, 2013.
Trouver le texte intégralProvis, John L., et Jannie S. J. van Deventer. Alkali Activated Materials : State-of-the-Art Report, RILEM TC 224-AAM. Springer, 2013.
Trouver le texte intégralAlternative Concrete – Geopolymer Concrete. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901533.
Texte intégralChapitres de livres sur le sujet "Alkali-activated materials (AAM)"
Ko, Lesley S. C., Irene Beleña, Peter Duxson, Elena Kavalerova, Pavel V. Krivenko, Luis-Miguel Ordoñez, Arezki Tagnit-Hamou et Frank Winnefeld. « AAM Concretes : Standards for Mix Design/Formulation and Early-Age Properties ». Dans Alkali Activated Materials, 157–76. Dordrecht : Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-7672-2_7.
Texte intégralSepuri, Hima Kiran, Nabil Hossiney, Sarath Chandra, Yu Chen, Patrick Amoah Bekoe et Vishnu Sai Nagavelly. « Effect of Recycled Asphalt Pavement (RAP) Aggregates on Strength of Fly Ash-GGBS-Based Alkali-Activated Concrete (AAC) ». Dans Advances in Sustainable Materials and Resilient Infrastructure, 221–30. Singapore : Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9744-9_15.
Texte intégralSamarina, Tatiana, Esther Takaluoma et Outi Laatikainen. « Geopolymers and Alkali-Activated Materials for Wastewater Treatment Applications and Valorization of Industrial Side Streams ». Dans Advances in Geopolymers Synthesis and Characterization [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97141.
Texte intégralActes de conférences sur le sujet "Alkali-activated materials (AAM)"
Raju, Thushara, Namitha S, Muhammed Nabil K, Mohammed Rafeeque N. V, Reshma Sundhar, Ramaswamy K. P et Saraswathy B. « Effect of alkali content and slag content on the fresh and hardened properties of air-cured alkali activated mortar containing fly ash ». Dans International Web Conference in Civil Engineering for a Sustainable Planet. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.112.48.
Texte intégralMildner, Martin, et Jan Fort. « VALORIZATION OF WASTE ALKALIS AS REPLACEMENT OF COMMERCIAL ALKALINE ACTIVATOR SOLUTION ». Dans 22nd SGEM International Multidisciplinary Scientific GeoConference 2022. STEF92 Technology, 2022. http://dx.doi.org/10.5593/sgem2022/6.1/s26.28.
Texte intégralMichal, Amala, Sneha Binoy, Akshay Mohan, Alisha A et Ramaswamy K. P. « A Review and Laboratory Trials on the Development of Geopolymer Mortar from Ceramic Waste ». Dans International Web Conference in Civil Engineering for a Sustainable Planet. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.112.55.
Texte intégralV., Aswani, Shobha Elizabeth Thomas et Ramaswamy K. P. « Effect of Admixtures in Blast Furnace Slag-fly Ash Based Alkali-activated Paste ». Dans 6th International Conference on Modeling and Simulation in Civil Engineering. AIJR Publisher, 2023. http://dx.doi.org/10.21467/proceedings.156.29.
Texte intégralHorvat, Barbara, et Branka Mušič. « Green Transition in Slovenian Building and Civil Engineering Industry : 10 Years of Research on Alkali-Activated Materials and Alkali-Activated Foams ». Dans Socratic lectures 10. University of Lubljana Press, 2024. http://dx.doi.org/10.55295/psl.2024.i18.
Texte intégralAlonso, Maria del Mar, Sara Gismera-Diez et Francisca Puertas. « Influencia de la naturaleza y granulometría de los áridos en el comportamiento reológico de morteros de cementos activados alcalinamente ». Dans HAC2018 - V Congreso Iberoamericano de Hormigón Autocompactable y Hormigones Especiales. Valencia : Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/hac2018.2018.6002.
Texte intégralAsadizadeh, M., A. Hedayat, L. Tunstall, M. Taboada Neira, J. A. Vega González et J. W. Verá Alvarado. « Mechanical Properties of Lightweight Aggregates Produced from Mine Tailings via Alkali-Activation ». Dans 57th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2023. http://dx.doi.org/10.56952/arma-2023-0838.
Texte intégral