Littérature scientifique sur le sujet « Al cu mg zn »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Al cu mg zn ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Al cu mg zn"
Ye, Dae-Hee, Hyun-Sik Kim, Min-Cheol Kang, Jung-Dae Kim et Hae-Yong Jeoung. « Electrical Conductivity by Addition of Zn and Cu on Mg-Zn-Cu Alloys ». Journal of Korea Foundry Society 34, no 3 (30 juin 2014) : 100–106. http://dx.doi.org/10.7777/jkfs.2014.34.3.100.
Texte intégralMinervino, Antonio, Marta López-Alonso, Raimundo Barrêto Júnior, Frederico Rodrigues, Carolina Araújo, Rejane Sousa, Clara Mori et al. « Dietary Zinc Supplementation to Prevent Chronic Copper Poisoning in Sheep ». Animals 8, no 12 (30 novembre 2018) : 227. http://dx.doi.org/10.3390/ani8120227.
Texte intégralMiettinen, Jyrki. « Thermodynamic description of Cu–Mg–Ni and Cu–Mg–Zn systems ». Calphad 32, no 2 (juin 2008) : 389–98. http://dx.doi.org/10.1016/j.calphad.2008.03.005.
Texte intégralYin, He, Zhi Hui Li, Kai Wen, Qing Hong Wen et Ya Nan Li. « Effect of Zn/Mg Ratio on Second Phase Dissolution during Solution Treatment of Al-Zn-Mg-Cu Alloys ». Materials Science Forum 1071 (18 octobre 2022) : 3–10. http://dx.doi.org/10.4028/p-04ua6p.
Texte intégralCemin, Henrique S., Luke A. Swalla, Jamie L. Pietig, Sharlie A. Hansen et Ernie L. Hansen. « PSIX-13 Effects of zinc and copper levels on growth performance of nursery pigs ». Journal of Animal Science 98, Supplement_3 (2 novembre 2020) : 179–80. http://dx.doi.org/10.1093/jas/skaa054.318.
Texte intégralZhang, Rong Hua, Biao Wu et Xiao Ping Zheng. « Effect of High Pressure Treatment on Nanoindentation Creep Property of Al-Zn-Mg-Cu Alloy ». Applied Mechanics and Materials 508 (janvier 2014) : 106–9. http://dx.doi.org/10.4028/www.scientific.net/amm.508.106.
Texte intégralNastiti, Sekar Alinda, Harmita . et Catur Jatmika. « SYNTHESIS AND ANALYSIS OF ZINC METHIONINE, ZINC GLYCINE, COPPER LEUCINE, AND COPPER GLYCINE COMPLEXES USING ATOMIC ABSORPTION SPECTROPHOTOMETRY ». International Journal of Applied Pharmaceutics 10, no 1 (20 décembre 2018) : 388. http://dx.doi.org/10.22159/ijap.2018.v10s1.86.
Texte intégralYang, Hong Bin, Meng Nie Li, Heng Yong Bu et Xin Lu. « Effects of alloying elements on the amounts of MgZn2 and S-Al2CuMg phase in 7075 aluminum alloy ». Journal of Micromechanics and Molecular Physics 05, no 02 (juin 2020) : 2050003. http://dx.doi.org/10.1142/s2424913020500034.
Texte intégralBACKIALAKSHMI, S., A. ARANGASAMY, J. SHARANYA NAIDU, J. GHOSH et R. BHATTA. « Study of the impact of organic minerals on spermatozoal gene expression in Osmanabadi bucks ». Indian Journal of Animal Sciences 94, no 4 (4 avril 2024) : 369–74. http://dx.doi.org/10.56093/ijans.v94i4.147248.
Texte intégralSubrahmanyam, Sreenath, Allan Adams, Anantanarayanan Raman, Dennis Hodgkins et Mark Heffernan. « Ecological modelling of a wetland for phytoremediating Cu, Zn and Mn in a gold–copper mine site using Typha domingensis (Poales : Typhaceae) near Orange, NSW, Australia ». European Journal of Ecology 3, no 2 (20 décembre 2017) : 77–91. http://dx.doi.org/10.1515/eje-2017-0016.
Texte intégralThèses sur le sujet "Al cu mg zn"
Howard, P. « Precipitation and creep in an Al-Zn-Mg-Cu based alloy ». Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356709.
Texte intégralJackson, Adrian. « Homogenisation effects of the hot working of Al-Zn-Mg-Cu alloys ». Thesis, Imperial College London, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.319934.
Texte intégralSolas, Denis. « Anisotropie des propriétés mécaniques et endommagement des alliages Al-Zn-Mg-Cu ». Grenoble INPG, 1997. http://www.theses.fr/1997INPG0226.
Texte intégralCaraher, Sally Kate 1974. « Clustering and precipitation processes in age-hardened Al-Zn-Mg-(Ag, Cu) alloys ». Monash University, School of Physics and Materials Engineering, 2002. http://arrow.monash.edu.au/hdl/1959.1/7803.
Texte intégralLamb, Justin. « Decomposition and its effects on mechanical properties in Al-Zn-Mg-Cu alloys ». Diss., Georgia Institute of Technology, 2016. http://hdl.handle.net/1853/54931.
Texte intégralCottignies, Laurent. « Propriétés mécaniques d'un alliage Al-Zn-Mg-Cu obtenu par voie Osprey(TM) ». Grenoble INPG, 1993. http://www.theses.fr/1993INPG0077.
Texte intégralКриницький, А. В., et В. З. Барсуков. « Дослідження впливу легування (Zn та Zn+Cu) на корозійну стійкість (α-Al-Mg2Si) сплавів системи Al-Mg-Si ». Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/4543.
Texte intégralРожин, А. В. « Совершенствование процессов модифицирования и легирования алюминиевых сплавов на основе систем Al-Cu-Mg и Al-Zn-Mg-Cu : автореф. дис. … канд. техн. наук : 05.16.04 ». Thesis, б. и, 2013. http://hdl.handle.net/10995/20232.
Texte intégralYoon, Yuhchae. « Formation and breakdown on chromate conversion coatings on Al-Zn-Mg-Cu 7x75 alloys ». Connect to this title online, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1101754567.
Texte intégralTitle from first page of PDF file. Document formatted into pages; contains xxi, 282 p.; also includes graphics (some col.). Includes bibliographical references (p. 262-282).
Rick, Cristiane Fonseca. « Estudo da liga base de Zn-Al-Cu-Mg aplicada na fabricação de jóias folhadas ». Pontifícia Universidade Católica do Rio Grande do Sul, 2006. http://hdl.handle.net/10923/3377.
Texte intégralThe last years, the jewellery industrial sector is becoming of significance importance in the scenario of national and international economy. Brazil is one of the jewels biggest world producer, being the Rio Grande do Sul the leading among all Brazilian states, with a regional distinction for the city of Guaporé witch has more than a hundred jewel factories, where are produced gold and silver jewels and semijewels plated with gold and silver. In spite of it, there are very few literature related to scientific studies in the jewellery area, particularly nationwide. In this context, this research has as a main aim to investigate the Zn-Al- Cu-Mg alloy that has recently applied in fabrication of jewel-plated in order to obtain information about the properties of interest to fabrication and plated processes. The experimental methodology utilized in this work involved the following steps: analysis of superficial defects in gold and silver plated semi-jewel made with Zn-Al-Cu-Mg commercial alloy and as well as the determination of its microstructure and mechanical characteristics; compositional modification of this alloy by the addiction of extra Copper and Magnesium and study of their effects in the alloy properties; and as a final point the evaluation of gold plating capacity of the commercial alloy and the alloy modified with Copper and Magnesium. This study demonstrated that composition variations modified considerably the microstructure of the alloy and consequently its mechanical properties, as well as this plating capacity. The employed characterization techniques CA-CCA (Computer- Aided Cooling Curve Analysis), DTA (Differential Thermal Analysis), Dilatometry and optical and scanning electron microcopies where of fundamental importance to better understand the influence of chemical composition on the microstructure and properties of the Zn-Al-Cu-Mg alloy. However, it was observed that another factor of great influence in the quality of the superficial plated of this alloy is the procedure and quality of cleaning effectuated in the parts for posterior platting process.
Nos últimos anos, o setor Joalheiro vem demonstrando uma importância cada vez mais significativa no cenário econômico nacional e internacional. O Brasil aparece entre os maiores produtores de Jóias do mercado mundial, assim como, o Rio Grande do Sul entre os estados brasileiros, com destaque regional para o Município de Guaporé que têm mais de 100 fábricas, onde são produzidas peças em Folhado, Prata ou Ouro. Entretanto, vale enfatizar que a literatura disponível referente a estudos científicos voltados para o setor Joalheiro é escassa, particularmente em nível nacional. Nesse contexto, esta pesquisa tem como objetivo principal investigar a liga à base de Zn-Al-Cu-Mg que recentemente tem sido aplicada na fabricação de jóias folheadas, com a finalidade de obter informações sobre suas propriedades de interesse aos processos de fabricação e de revestimento. A metodologia experimental utilizada no desenvolvimento desse trabalho envolveu as seguintes etapas: análise dos defeitos de acabamento em semi-jóias folhadas com Ouro e Prata confeccionadas com a liga comercial à base de Zn-Al-Cu-Mg e determinação de suas características microestruturais e mecânicas; modificação composicional dessa liga pela adição extra de Cobre e Magnésio e estudo dos seus efeitos nas propriedades da mesma e por fim avaliação da capacidade de revestimento com Ouro da liga comercial e modificada pela adição de Cobre e Magnésio. Este estudo mostra que variações composicionais da liga Zn-Al-Cu-Mg modifica de forma significativa a microestrutura da referida liga e conseqüentemente suas propriedades mecânicas, bem como sua capacidade de revestimento. As técnicas de caracterização utilizadas, CA-CCA (Computer-Aided Cooling Curve Analysis), DTA (Differential Thermal Analysis), Dilatometria e Microscopias Óptica e Eletrônica de Varredura, foram fundamentais para entender melhor a influência da composição química na microestrutura e propriedades da liga à base de Zn-Al-Cu-Mg. Contudo, observou-se que um outro fator de grande influência na qualidade do revestimento dessa liga é o procedimento e qualidade de limpeza prévia efetuadas nas peças para o posterior folhamento.
Livres sur le sujet "Al cu mg zn"
Huang, Ze Wen. Study of the ageing behaviour of Al-Mg-Si 6061 and Al-Zn-Mg-Cu 7075 alloys with and without lithium additions. Birmingham : University of Birmingham, 1991.
Trouver le texte intégralRahman, Asif. Determination of Mg,Zn and Cu in excreted fluids of renal patients on haemodialysis and continuous ambulatory peritoneal dialysis (CAPD). Wolverhampton : University of Wolverhampton, 1993.
Trouver le texte intégralTaylor, Ronald M. Comparative baseline concentration of Ca, Mg, Na, K, Cu, Zn, Fe, Mn, Ni and Cr in the freshwater crayfish, Cambarus robustus (Cambaridae, Decapoda, Crustacea) from an acidic metal contaminated lake and circumneutral uncontaminated stream. Sudbury, Ont : Laurentian University, 1994.
Trouver le texte intégralMurphy, Loretta Mary. XaAFS and EPR studies on Bovine Cu, Zn Superoxide dismutase. Manchester : University of Manchester, 1995.
Trouver le texte intégralLiu, Yaxiu. Processing and properties of shape memory alloys Ti-Ni, Ti-Ni-Cu and Cu-Zn-Al. Birmingham : University of Birmingham, 2002.
Trouver le texte intégralChiri, J. M. Methanol synthesis on a Mg-doped Cu/ZnO/Al2O3 catalyst. Manchester : UMIST, 1997.
Trouver le texte intégralA, Dolgin E., et Stikhotvort͡s︡eva N. A, dir. Metallogenii͡a︡ (Cu, Pb, Zn, Co, Ni) glavneĭshikh tektonicheskikh struktur Afrikano-Araviĭskoĭ platformy. Moskva : "Nedra", 1987.
Trouver le texte intégralIlczuk, Jan. Zjawiska tarcia wewnętrznego występujące podczas odwracalnej przemiany martenzytycznej stopów Cu-Zn-Al. Katowice : Uniwersytet Śląski, 1993.
Trouver le texte intégralChien, Yung-Tsen. Powder preparation, microstructural development and magnetic properties of gel-derived Mg-Mn-Zn ferrites. Manchester : University of Manchester, 1993.
Trouver le texte intégralLangan, T. J. Microstructure-property relationships in Al-Cu-Li-Ag-Mg Weldalite alloys. Hampton, Va : Langley Research Center, 1991.
Trouver le texte intégralChapitres de livres sur le sujet "Al cu mg zn"
Mürbe, Julia, et Jörg Töpfer. « Mg-Cu-Zn Ferrites for Multilayer Inductors ». Dans Progress in Nanotechnology, 141–48. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9780470588260.ch21.
Texte intégralFerragut, Rafael, A. Dupasquier, M. M. Iglesias, C. E. Macchi, Alberto Somoza et Ian J. Polmear. « Vacancy-Solute Aggregates in Al-Zn-Mg-(Cu, Ag) ». Dans Materials Science Forum, 309–14. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-408-1.309.
Texte intégralKolb, Gernot K. H., Helmut Antrekowitsch, Daniel Pöschmann, Peter J. Uggowitzer et Stefan Pogatscher. « Effect of Interrupted Quenching on Al–Zn–Mg–Cu Alloys ». Dans Light Metals 2017, 385–89. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51541-0_48.
Texte intégralZhao, Zhong Kui, Tie Tao Zhou, Pei Ying Liu et Chang Qi Chen. « Ageing Processes of Li-Containing Al-Zn-Mg-Cu Alloys ». Dans Key Engineering Materials, 1605–8. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1605.
Texte intégralJun-Hua, You, Wang Hou-Chun, Qiu Ke-Qiang et Ren Ying-Lei. « Fabrication of Mg-Cu-Zn-Y-Zr Amorphous Matrix Composites ». Dans TMS2013 Supplemental Proceedings, 253–57. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663547.ch32.
Texte intégralVratnica, M., Z. Cvijović, H. Peter Degischer, Guillermo C. Requena, G. Rumplmair et Marko Rakin. « Crack Growth Resistance of Overaged Al-Zn-Mg-Cu Alloys ». Dans Materials Science Forum, 217–22. Stafa : Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-971-7.217.
Texte intégralDu, Z. W., B. L. Shao, A. S. Liu, Z. M. Sun, X. S. Zhang, T. T. Zhou et Chang Qi Chen. « Characterization of Precipitation in Al-Zn-Mg-Cuand Li Containing Al-Zn-Mg-Cu Alloys after Isothermal Aging ». Dans Materials Science Forum, 977–82. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.977.
Texte intégralYuan, Jie, Min Zuo, Maximilian Sokoluk, Gongcheng Yao, Shuaihang Pan et Xiaochun Li. « Nanotreating High-Zinc Al–Zn–Mg–Cu Alloy by TiC Nanoparticles ». Dans Light Metals 2020, 318–23. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36408-3_46.
Texte intégralAlali Alkhalaf, Ahmad, Anna Tesleva, Pavel Polyakov, Matthias Moschinger, Sebastian Fritsche, Iuliia Morozova, Anton Naumov, Fedor Isupov, Gonçalo Pina Cipriano et Sergio T. Amancio-Filho. « Modified Friction Stir Welding of Al–Zn–Mg–Cu Aluminum Alloy ». Dans The Minerals, Metals & ; Materials Series, 43–51. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65265-4_5.
Texte intégralKawazoe, Yoshiyuki, Ursula Carow-Watamura et Dmitri V. Louzguine. « Physical, thermal and mechanical properties of Cu-Gd-Mg-Zn alloy ». Dans Phase Diagrams and Physical Properties of Nonequilibrium Alloys, 72–73. Berlin, Heidelberg : Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-57920-6_21.
Texte intégralActes de conférences sur le sujet "Al cu mg zn"
Котов, А. Д., А. В. Михайловская, М. Н. Ситкина et А. А. Борисов. « Сверхпластичность сплавов системы Al-Zn-Mg-Cu-Ni-Zr с разным содержанием Znи Mg ». Dans Тенденции развития науки и образования. «Л-Журнал», 2017. http://dx.doi.org/10.18411/lj-30-11-2017-55.
Texte intégralDitta, Allah, Wei Lijun, Li Long, Xu Yanjin, Kashif Naseem et Wu Sujun. « Microstructure and Mechanical Properties of Spray-formed High Zn-containing Al-Zn-Mg-Cu alloy ». Dans 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST - 2019). IEEE, 2019. http://dx.doi.org/10.1109/ibcast.2019.8667120.
Texte intégralHamilton, Carter, Andrew Sommers et Oleg Senkov. « Friction Stir Welding of Sc-Modified Al-Zn-Mg-Cu Alloy Extrusions ». Dans ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67490.
Texte intégralCozma, Antoanela, Sofia Popescu, Maria Rada, Casiana Mihut et Ariana Velciov. « DEVELOPMENT AND MINERAL CHARACTERIZATION OF MILK CHOCOLATE FORTIFIED WITH CHICKEN EGGSHELL POWDER ». Dans 22nd SGEM International Multidisciplinary Scientific GeoConference 2022. STEF92 Technology, 2022. http://dx.doi.org/10.5593/sgem2022v/6.2/s25.19.
Texte intégralPeycheva, Katya, Katya Peycheva, Mona Stancheva, Mona Stancheva, Stanislava Georgieva, Stanislava Georgieva, Lubomir Makedosnki et Lubomir Makedosnki. « HEAVY METALS IN WATER, SEDIMENTS AND MARINE FISHES FROM BULGARIAN BLACK SEA ». Dans Managing risks to coastal regions and communities in a changing world. Academus Publishing, 2017. http://dx.doi.org/10.31519/conferencearticle_5b1b93d4d78bb6.88545986.
Texte intégralPeycheva, Katya, Katya Peycheva, Mona Stancheva, Mona Stancheva, Stanislava Georgieva, Stanislava Georgieva, Lubomir Makedosnki et Lubomir Makedosnki. « HEAVY METALS IN WATER, SEDIMENTS AND MARINE FISHES FROM BULGARIAN BLACK SEA ». Dans Managing risks to coastal regions and communities in a changing world. Academus Publishing, 2017. http://dx.doi.org/10.21610/conferencearticle_58b4315c12f92.
Texte intégralUđilanović, M. Z., S. D. Vasiljević et Z. S. Šimšić. « QUANTIFICATION OF ESSENTIAL ELEMENTS IN PAPAVER RHOEAS L. AND PAPAVER SOMNIFERUM ». Dans 1st INTERNATIONAL Conference on Chemo and BioInformatics. Institute for Information Technologies, University of Kragujevac, 2021. http://dx.doi.org/10.46793/iccbi21.133u.
Texte intégralElhefnawey, Maged, L. Li, G. L. Shuai, Z. Li, M. Nemat-Alla et D. T. Zhang. « On Improvement of Microhardness for Al-Zn-Mg-Cu Alloy via Cold ECAP ». Dans 2020 5th International Conference on Control, Robotics and Cybernetics (CRC). IEEE, 2020. http://dx.doi.org/10.1109/crc51253.2020.9253486.
Texte intégralBranković, Snežana, Radmila Glišić, Duško Brković, Gorica Đelić, Filip Grbović, Vera Rajičić, Marija Marin, Marijana Vasić et Jelena Bogosavljević. « BIOAKUMULACIONI I TRANSLOKACIONI POTENCIJAL VRSTE „HOLCUS LANATUS“ L. NA JALOVIŠTU RUDNIK DOO „RUDNIK“ ». Dans XXVII savetovanje o biotehnologiji. University of Kragujevac, Faculty of Agronomy, 2022. http://dx.doi.org/10.46793/sbt27.291b.
Texte intégralJuliastuti, Sri Rachmania, Farah Salsabila, Fairuza Fasya Rahadisty, Lailatul Qadariyah et Siti Nurkhamidah. « Production of Cu-EDTA, Zn-EDTA, CuZn-EDTA as a Micronutrient Fertilizer and its Application to Lettuce ». Dans 4th International Seminar on Fundamental and Application of Chemical Engineering. Switzerland : Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-opjm7m.
Texte intégralRapports d'organisations sur le sujet "Al cu mg zn"
Senkov, O. N., et Y. Q. Cheng. Ab Initio Molecular Dynamics Simulation of the Amorphous Structure of Ca-Mg-Cu and Ca-Mg-Zn Alloys (Preprint). Fort Belvoir, VA : Defense Technical Information Center, août 2012. http://dx.doi.org/10.21236/ada566094.
Texte intégralYoung, G. A., et J. R. Scully. Factors Affecting the Hydrogen Environment Assisted Cracking Resistance of an AL-Zn-Mg-(Cu) Alloy. Office of Scientific and Technical Information (OSTI), avril 2002. http://dx.doi.org/10.2172/820717.
Texte intégralG.A. Young et J.R. Scully. Factors Affecting the Hydrogen Environment Assisted Cracking Resistance of an Al-Zn-Mg-(Cu) Alloy. Office of Scientific and Technical Information (OSTI), septembre 2001. http://dx.doi.org/10.2172/821686.
Texte intégralСавосько, Василь Миколайович, Юлія Віліївна Бєлик, Юрій Васильович Лихолат, Герман Хайльмейер et Іван Панасович Григорюк. Macronutrients and Heavy Metals Contents in the Leaves of Trees from the Devastated Lands at Kryvyi Rih District (Central Ukraine). E3S Web of Conferences, 2020. http://dx.doi.org/10.31812/123456789/3785.
Texte intégralG.A. Young, Jr, et J.R. Scully. The Effects of Test Temperature, Temper, and Alloyed Copper on the Hydrogen-Controlled Crack Growth Rate of an Al-Zn-Mg-(Cu) Alloy. Office of Scientific and Technical Information (OSTI), septembre 2000. http://dx.doi.org/10.2172/821950.
Texte intégralAnderson, Andrew, et Mark Yacucci. Inventory and Statistical Characterization of Inorganic Soil Constituents in Illinois : Appendices. Illinois Center for Transportation, juin 2021. http://dx.doi.org/10.36501/0197-9191/21-007.
Texte intégralСавосько, Василь Миколайович, Юлія Віліївна Бєлик, Юрій Васильович Лихолат, Герман Хайльмейер et Іван Панасович Григорюк. Macronutrients and Heavy Metals Contents in the Leaves of Trees from the Devastated Lands at Kryvyi Rih District (Central Ukraine). КДПУ, 2020. http://dx.doi.org/10.31812/123456789/4151.
Texte intégralSavosko, V., I. Komarova, Yu Lykholat, E. Yevtushenko et T. Lykholat. Predictive model of heavy metals inputs to soil at Kryvyi Rih District and its use in the training for specialists in the field of Biology. IOP Publishing, 2021. http://dx.doi.org/10.31812/123456789/4511.
Texte intégralСавосько, Василь Миколайович, Ірина Олександрівна Комарова, Юрій Васильович Лихолат, Едуард Олексійович Євтушенко, et Тетяна Юріївна Лихолат. Predictive Model of Heavy Metals Inputs to Soil at Kryvyi Rih District and its Use in the Training for Specialists in the Field of Biology. IOP Publishing, 2021. http://dx.doi.org/10.31812/123456789/4266.
Texte intégralKidder, J. A., M. B. McClenaghan, M I Leybourne, M. W. McCurdy, P. Pelchat, D. Layton-Matthews, C. E. Beckett-Brown et A. Voinot. Geochemical data for stream and groundwaters around the Casino Cu-Au-Mo porphyry deposit, Yukon (NTS 115 J/10 and 115 J/15). Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/328862.
Texte intégral