Articles de revues sur le sujet « Additive manufacturing (FDM) »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Additive manufacturing (FDM) ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Beniak, Juraj, Peter Krizan et Milos Matus. « CONDUCTIVE MATERIAL PROPERTIES FOR FDM ADDITIVE MANUFACTURING ». MM Science Journal 2020, no 1 (4 mars 2020) : 3846–51. http://dx.doi.org/10.17973/mmsj.2020_03_2019135.
Texte intégralDi Angelo, L., P. Di Stefano et A. Marzola. « Surface quality prediction in FDM additive manufacturing ». International Journal of Advanced Manufacturing Technology 93, no 9-12 (24 juillet 2017) : 3655–62. http://dx.doi.org/10.1007/s00170-017-0763-6.
Texte intégralCh, Manoj,. « A REVIEW ON ADDITIVE MANUFACTURING (AM) MATERIAL - STATISTICS AND COMPARISIONS ». INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no 05 (5 mai 2024) : 1–5. http://dx.doi.org/10.55041/ijsrem32619.
Texte intégralSiraj, Imran, et Pushpendra S. Bharti. « Assessing quality in extrusion based additive manufacturing technologies ». Journal of Information and Optimization Sciences 45, no 1 (2024) : 25–46. http://dx.doi.org/10.47974/jios-1137.
Texte intégralSkawiński, Piotr, Przemysław Siemiński et Piotr Błazucki. « Applications of additive manufacturing (FDM method) in the manufacturing of gear ». Mechanik, no 12 (décembre 2015) : 976/173–976/179. http://dx.doi.org/10.17814/mechanik.2015.12.582.
Texte intégralBoyard, Nicolas, Olivier Christmann, Mickaël Rivette, Olivier Kerbrat et Simon Richir. « Support optimization for additive manufacturing : application to FDM ». Rapid Prototyping Journal 24, no 1 (2 janvier 2018) : 69–79. http://dx.doi.org/10.1108/rpj-04-2016-0055.
Texte intégralCuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva et Armando Roman-Flores. « Additive manufacturing and mechanical properties of lattice-curved structures ». Rapid Prototyping Journal 25, no 5 (10 juin 2019) : 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Texte intégralParandoush, Pedram, Palamandadige Fernando, Hao Zhang, Chang Ye, Junfeng Xiao, Meng Zhang et Dong Lin. « A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites ». Rapid Prototyping Journal 27, no 4 (5 mai 2021) : 754–68. http://dx.doi.org/10.1108/rpj-10-2019-0260.
Texte intégralChen, Jian-Ming, Demei Lee, Jheng-Wei Yang, Sheng-Han Lin, Yu-Ting Lin et Shih-Jung Liu. « Solution Extrusion Additive Manufacturing of Biodegradable Polycaprolactone ». Applied Sciences 10, no 9 (3 mai 2020) : 3189. http://dx.doi.org/10.3390/app10093189.
Texte intégralHernandez-Contreras, Adriana, Leopoldo Ruiz-Huerta, Alberto Caballero-Ruiz, Verena Moock et Hector R. Siller. « Extended CT Void Analysis in FDM Additive Manufacturing Components ». Materials 13, no 17 (30 août 2020) : 3831. http://dx.doi.org/10.3390/ma13173831.
Texte intégralGeorgopoulou, Antonia, Lukas Egloff, Bram Vanderborght et Frank Clemens. « A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing ». Actuators 10, no 5 (10 mai 2021) : 102. http://dx.doi.org/10.3390/act10050102.
Texte intégralDama Y. B. « Application of Nonlinear Analysis in Evaluating Additive Manufacturing Process for Engineering Design Features : A Study and Recommendations ». Communications on Applied Nonlinear Analysis 31, no 1s (16 mai 2024) : 94–105. http://dx.doi.org/10.52783/cana.v31.559.
Texte intégralBehseresht, Saeed, et Young Ho Park. « Additive Manufacturing of Composite Polymers : Thermomechanical FEA and Experimental Study ». Materials 17, no 8 (20 avril 2024) : 1912. http://dx.doi.org/10.3390/ma17081912.
Texte intégralWang, Yanen, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, Mudassar Rehman, Aqib Mashood Khan et al. « Additive manufacturing is sustainable technology : citespace based bibliometric investigations of fused deposition modeling approach ». Rapid Prototyping Journal 28, no 4 (25 octobre 2021) : 654–75. http://dx.doi.org/10.1108/rpj-05-2021-0112.
Texte intégralBen hadj Hassine, Salem, Sami Chatti, Borhen Louhichi et Abdennour Seibi. « Experimental Study of the Tensile Behavior of Structures Obtained by FDM 3D Printing Process ». Polymers 16, no 11 (31 mai 2024) : 1562. http://dx.doi.org/10.3390/polym16111562.
Texte intégralCicala, Gianluca, Alberta Latteri, Barbara Del Curto, Alessio Lo Russo, Giuseppe Recca et Silvia Farè. « Engineering Thermoplastics for Additive Manufacturing : A Critical Perspective with Experimental Evidence to Support Functional Applications ». Journal of Applied Biomaterials & ; Functional Materials 15, no 1 (26 janvier 2017) : 10–18. http://dx.doi.org/10.5301/jabfm.5000343.
Texte intégralAlzyod, Hussein, et Peter Ficzere. « Correlation Between Printing Parameters and Residual Stress in Additive Manufacturing : A Numerical Simulation Approach ». Production Engineering Archives 29, no 3 (28 août 2023) : 279–87. http://dx.doi.org/10.30657/pea.2023.29.32.
Texte intégralPatterson, Albert E., Charul Chadha et Iwona M. Jasiuk. « Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing ». Journal of Manufacturing and Materials Processing 5, no 2 (10 avril 2021) : 33. http://dx.doi.org/10.3390/jmmp5020033.
Texte intégralAsadollahi-Yazdi, Elnaz, Julien Gardan et Pascal Lafon. « Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling ». Rapid Prototyping Journal 25, no 5 (10 juin 2019) : 875–87. http://dx.doi.org/10.1108/rpj-07-2018-0186.
Texte intégralRasselet, Damien, Anne-Sophie Caro-Bretelle, Aurélie Taguet et José-Marie Lopez-Cuesta. « Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing ». Materials 12, no 3 (5 février 2019) : 485. http://dx.doi.org/10.3390/ma12030485.
Texte intégralDing, Huan, Congyuan Zeng, Jonathan Raush, Kasra Momeni et Shengmin Guo. « Developing Fused Deposition Modeling Additive Manufacturing Processing Strategies for Aluminum Alloy 7075 : Sample Preparation and Metallographic Characterization ». Materials 15, no 4 (11 février 2022) : 1340. http://dx.doi.org/10.3390/ma15041340.
Texte intégralKim, Eunseob, Yong-Jun Shin et Sung-Hoon Ahn. « The effects of moisture and temperature on the mechanical properties of additive manufacturing components : fused deposition modeling ». Rapid Prototyping Journal 22, no 6 (17 octobre 2016) : 887–94. http://dx.doi.org/10.1108/rpj-08-2015-0095.
Texte intégralAbouzaid, Khaoula, Sofiane Guessasma, Sofiane Belhabib, David Bassir et Abdelkrim Chouaf. « Thermal mechanical characterization of copolyester for additive manufacturing using FDM ». International Journal for Simulation and Multidisciplinary Design Optimization 10 (2019) : A9. http://dx.doi.org/10.1051/smdo/2019011.
Texte intégralChaudhari, Madhuri, Bhagwan F. Jogi et R. S. Pawade. « Comparative Study of Part Characteristics Built Using Additive Manufacturing (FDM) ». Procedia Manufacturing 20 (2018) : 73–78. http://dx.doi.org/10.1016/j.promfg.2018.02.010.
Texte intégralKoizumi, Satoru, Takehiro Kawamura et Tatsuya Mochizuki. « Study on CAM Software for Additive Manufacturing with FDM Method ». International Journal of Automation Technology 11, no 5 (30 août 2017) : 835–43. http://dx.doi.org/10.20965/ijat.2017.p0835.
Texte intégralRinaldi, Marianna, Tommaso Ghidini, Federico Cecchini, Ana Brandao et Francesca Nanni. « Additive layer manufacturing of poly (ether ether ketone) via FDM ». Composites Part B : Engineering 145 (juillet 2018) : 162–72. http://dx.doi.org/10.1016/j.compositesb.2018.03.029.
Texte intégralPaterson, Abby Megan, Richard Bibb, R. Ian Campbell et Guy Bingham. « Comparing additive manufacturing technologies for customised wrist splints ». Rapid Prototyping Journal 21, no 3 (20 avril 2015) : 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Texte intégralWang, Shushu, Rakshith Badarinath, El-Amine Lehtihet et Vittaldas Prabhu. « Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot ». International Journal of Automation Technology 11, no 1 (5 janvier 2017) : 29–37. http://dx.doi.org/10.20965/ijat.2017.p0029.
Texte intégralFICĂ, Sorin Alexandru, Andrei DIMITRESCU et Claudiu BABIȘ. « Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Top Cover ». Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science 46, no 2 (15 juin 2023) : 28–32. http://dx.doi.org/10.35219/mms.2023.2.05.
Texte intégralTsao, Che-Chih, Ho-Hsin Chang, Meng-Hao Liu, Ho-Chia Chen, Yun-Tang Hsu, Pei-Ying Lin, Yih-Lin Chou et al. « Freeform additive manufacturing by vari-directional vari-dimensional material deposition ». Rapid Prototyping Journal 24, no 2 (12 mars 2018) : 379–94. http://dx.doi.org/10.1108/rpj-01-2017-0014.
Texte intégralMartins, Rui F., Ricardo Branco, Filippo Berto, Nuno Soares et Sebastião Bandeira. « Structural Integrity of Polymeric Components Produced by Additive Manufacturing (AM)—Polymer Applications ». Polymers 13, no 24 (16 décembre 2021) : 4420. http://dx.doi.org/10.3390/polym13244420.
Texte intégralT., Sathies, Senthil P. et Anoop M.S. « A review on advancements in applications of fused deposition modelling process ». Rapid Prototyping Journal 26, no 4 (30 janvier 2020) : 669–87. http://dx.doi.org/10.1108/rpj-08-2018-0199.
Texte intégralAhmed, Bilal Anjum, Uzair Nadeem, Abbas Saeed Hakeem, Anwar Ul-Hamid, Mohd Yusuf Khan, Muhammad Younas et Hasan Aftab Saeed. « Printing Parameter Optimization of Additive Manufactured PLA Using Taguchi Design of Experiment ». Polymers 15, no 22 (10 novembre 2023) : 4370. http://dx.doi.org/10.3390/polym15224370.
Texte intégralBorille, Anderson Vicente, Jefferson de Oliveira Gomes et Daniel Lopes. « Geometrical analysis and tensile behaviour of parts manufactured with flame retardant polymers by additive manufacturing ». Rapid Prototyping Journal 23, no 1 (16 janvier 2017) : 169–80. http://dx.doi.org/10.1108/rpj-09-2015-0130.
Texte intégralFaizaan, Mirza, Satish Shenoy et Chandrakant R. Kini. « Tensile and Flexural Performance of Hybrid FDM and Compression Moulded PLA/Basalt Biocomposite ». Materials Science Forum 1120 (18 avril 2024) : 77–84. http://dx.doi.org/10.4028/p-duyo7m.
Texte intégralSchmitt, Matt, Raj Mattias Mehta et Il Yong Kim. « Additive manufacturing infill optimization for automotive 3D-printed ABS components ». Rapid Prototyping Journal 26, no 1 (6 janvier 2020) : 89–99. http://dx.doi.org/10.1108/rpj-01-2019-0007.
Texte intégralFaludi, Jeremy, Cindy Bayley, Suraj Bhogal et Myles Iribarne. « Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment ». Rapid Prototyping Journal 21, no 1 (19 janvier 2015) : 14–33. http://dx.doi.org/10.1108/rpj-07-2013-0067.
Texte intégralGotkhindikar, Nitin, Parshwa Mehta, Shrutika Londhe, Anushka Kulkarni et Maithili Rekhe. « A Novel FDM Based Additive Manufacturing of PLA Components Using Optimized Deep Learning Strategy ». International Journal for Research in Applied Science and Engineering Technology 10, no 4 (30 avril 2022) : 1042–49. http://dx.doi.org/10.22214/ijraset.2022.41436.
Texte intégralChang, Gaoyuan, Xiaoxun Zhang, Fang Ma, Cheng Zhang et Luyang Xu. « Printing, Debinding and Sintering of 15-5PH Stainless Steel Components by Fused Deposition Modeling Additive Manufacturing ». Materials 16, no 19 (23 septembre 2023) : 6372. http://dx.doi.org/10.3390/ma16196372.
Texte intégralQin, Qin, Jigang Huang et Jin Yao. « A real-time adaptive look-ahead speed control algorithm for FDM-based additive manufacturing technology with Hbot kinematic system ». Rapid Prototyping Journal 25, no 6 (8 juillet 2019) : 1095–107. http://dx.doi.org/10.1108/rpj-11-2018-0291.
Texte intégralStöckli, Fritz, Fabio Modica et Kristina Shea. « Designing passive dynamic walking robots for additive manufacture ». Rapid Prototyping Journal 22, no 5 (15 août 2016) : 842–47. http://dx.doi.org/10.1108/rpj-11-2015-0170.
Texte intégralBehseresht, Saeed, Allen Love, Omar Alejandro Valdez Pastrana et Young Ho Park. « Enhancing Fused Deposition Modeling Precision with Serial Communication-Driven Closed-Loop Control and Image Analysis for Fault Diagnosis-Correction ». Materials 17, no 7 (22 mars 2024) : 1459. http://dx.doi.org/10.3390/ma17071459.
Texte intégralWan, Qia, Youjian Xu et Can Lu. « A fundamental study of parameter adjustable additive manufacturing process based on FDM process ». MATEC Web of Conferences 189 (2018) : 05001. http://dx.doi.org/10.1051/matecconf/201818905001.
Texte intégralKhan, Shaheryar Atta, Bilal Ahmed Siddiqui, Muhammad Fahad et Maqsood Ahmed Khan. « Evaluation of the Effect of Infill Pattern on Mechanical Stregnth of Additively Manufactured Specimen ». Materials Science Forum 887 (mars 2017) : 128–32. http://dx.doi.org/10.4028/www.scientific.net/msf.887.128.
Texte intégralLiu, Jikai, Jingjing Yan et Huangchao Yu. « Stress-constrained topology optimization for material extrusion polymer additive manufacturing ». Journal of Computational Design and Engineering 8, no 3 (29 mai 2021) : 979–93. http://dx.doi.org/10.1093/jcde/qwab028.
Texte intégralBeniak, Juraj, Ľubomír Šooš, Peter Križan, Miloš Matúš et Vít Ruprich. « Resistance and Strength of Conductive PLA Processed by FDM Additive Manufacturing ». Polymers 14, no 4 (10 février 2022) : 678. http://dx.doi.org/10.3390/polym14040678.
Texte intégralCunico, Marlon Wesley Machado, Miriam Machado Cunico, Patrick Medeiros Cavalheiro et Jonas de Carvalho. « Investigation of additive manufacturing surface smoothing process ». Rapid Prototyping Journal 23, no 1 (16 janvier 2017) : 201–8. http://dx.doi.org/10.1108/rpj-11-2015-0176.
Texte intégralFarina, Ilenia, Narinder Singh, Francesco Colangelo, Raimondo Luciano, Giulio Bonazzi et Fernando Fraternali. « High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing ». Materials 12, no 23 (28 novembre 2019) : 3955. http://dx.doi.org/10.3390/ma12233955.
Texte intégralÇevik, Ümit, et Menderes Kam. « A Review Study on Mechanical Properties of Obtained Products by FDM Method and Metal/Polymer Composite Filament Production ». Journal of Nanomaterials 2020 (20 novembre 2020) : 1–9. http://dx.doi.org/10.1155/2020/6187149.
Texte intégralUlkir, Osman, Mehmet Said Bayraklılar et Melih Kuncan. « Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm ». Applied Sciences 14, no 5 (29 février 2024) : 2046. http://dx.doi.org/10.3390/app14052046.
Texte intégral