Littérature scientifique sur le sujet « Additive manufacturing (FDM) »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Additive manufacturing (FDM) ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Additive manufacturing (FDM)"
Beniak, Juraj, Peter Krizan et Milos Matus. « CONDUCTIVE MATERIAL PROPERTIES FOR FDM ADDITIVE MANUFACTURING ». MM Science Journal 2020, no 1 (4 mars 2020) : 3846–51. http://dx.doi.org/10.17973/mmsj.2020_03_2019135.
Texte intégralDi Angelo, L., P. Di Stefano et A. Marzola. « Surface quality prediction in FDM additive manufacturing ». International Journal of Advanced Manufacturing Technology 93, no 9-12 (24 juillet 2017) : 3655–62. http://dx.doi.org/10.1007/s00170-017-0763-6.
Texte intégralCh, Manoj,. « A REVIEW ON ADDITIVE MANUFACTURING (AM) MATERIAL - STATISTICS AND COMPARISIONS ». INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no 05 (5 mai 2024) : 1–5. http://dx.doi.org/10.55041/ijsrem32619.
Texte intégralSiraj, Imran, et Pushpendra S. Bharti. « Assessing quality in extrusion based additive manufacturing technologies ». Journal of Information and Optimization Sciences 45, no 1 (2024) : 25–46. http://dx.doi.org/10.47974/jios-1137.
Texte intégralSkawiński, Piotr, Przemysław Siemiński et Piotr Błazucki. « Applications of additive manufacturing (FDM method) in the manufacturing of gear ». Mechanik, no 12 (décembre 2015) : 976/173–976/179. http://dx.doi.org/10.17814/mechanik.2015.12.582.
Texte intégralBoyard, Nicolas, Olivier Christmann, Mickaël Rivette, Olivier Kerbrat et Simon Richir. « Support optimization for additive manufacturing : application to FDM ». Rapid Prototyping Journal 24, no 1 (2 janvier 2018) : 69–79. http://dx.doi.org/10.1108/rpj-04-2016-0055.
Texte intégralCuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva et Armando Roman-Flores. « Additive manufacturing and mechanical properties of lattice-curved structures ». Rapid Prototyping Journal 25, no 5 (10 juin 2019) : 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Texte intégralParandoush, Pedram, Palamandadige Fernando, Hao Zhang, Chang Ye, Junfeng Xiao, Meng Zhang et Dong Lin. « A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites ». Rapid Prototyping Journal 27, no 4 (5 mai 2021) : 754–68. http://dx.doi.org/10.1108/rpj-10-2019-0260.
Texte intégralChen, Jian-Ming, Demei Lee, Jheng-Wei Yang, Sheng-Han Lin, Yu-Ting Lin et Shih-Jung Liu. « Solution Extrusion Additive Manufacturing of Biodegradable Polycaprolactone ». Applied Sciences 10, no 9 (3 mai 2020) : 3189. http://dx.doi.org/10.3390/app10093189.
Texte intégralHernandez-Contreras, Adriana, Leopoldo Ruiz-Huerta, Alberto Caballero-Ruiz, Verena Moock et Hector R. Siller. « Extended CT Void Analysis in FDM Additive Manufacturing Components ». Materials 13, no 17 (30 août 2020) : 3831. http://dx.doi.org/10.3390/ma13173831.
Texte intégralThèses sur le sujet "Additive manufacturing (FDM)"
Rafaja, Hynek. « Monitorování procesu FDM tisku ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399310.
Texte intégralRavi, Prame Manush. « Fracture Properties of Thermoplastic Composites Manufactured Using Additive Manufacturing ». Youngstown State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1516191324564382.
Texte intégralEmericks, Isak. « Challanges In Constructing Large Frame FDM 3D Printers ». Thesis, KTH, Skolan för industriell teknik och management (ITM), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279503.
Texte intégralDet här projektet initierades av Postnord som ville utveckla en egen storskalig FDM 3D printer, huvudsakligen på grund av två anledningar. Den första för att kunna använda samarbetet med KTH för att visa hur Postnord främjar inhemsk produktion samtidigt som de själva är ledare och initiativtagare inom additiv tillverkning i Sverige. Den andra anledningen var för att få tag på en maskin som har möjligheten att skriva ut stora- och småskaliga prototyper och produkter som kan användas i en industriell miljö. De uppsatta målen och önskvärda resultatet med PP3D (PostPapper3D - projektnamn) var att konstruera en storskalig FDM 3D skrivare, men en byggarea på 1 kvadratmeter och (om möjligt) en byggvolym på 1 kubikmeter, kapabel att skriva ut delar för industriella tillämpningar. Det här skulle uppnås genom att använda industriella komponenter och toppmoderna kontrollsystem för 3D skrivare. Sensorer för att upptäcka när utskriftsmaterialet var på väg att ta slut och automatisk utjämning av byggytan var också önskvärt. Förutom dessa målsättningar så ville KTH-IIP att arbetet skulle fokusera på konstruktionen av en storskalig FDM 3D skrivare, vilka utmaningar och problem som uppstår när tekniken skalas upp, för att fortsätta den interna visionen om att utveckla strategiska kompetenser inom additiva tillverkningsmetoder - vilket industrin efterfrågade. Resultatet av projektet var en 3D skrivare med en byggvolym på 1000x1000x950 [mm] som kommer utrustad med två (individuellt styrda) utskriftshuvuden - som antingen kan skriva ut två identiska kopior av samma objekt eller som kan arbeta tillsammans för att bygga upp en komponent mer effektivt. Den högsta testade utskriftshastigheten var 100 [mm/s] och den högsta testade hastigheten för rörelse var 250 [mm/s]. Den teoretiska upplösningen hos maskinen är 50 [μm] men det här har inte kontrollerats i det här projektet. Inom omfattningen av ett examensarbete (civilingenjör) så hann inte alla prototyp-symptom elimineras, där det mest betydande problemet var att motorerna bitvis missar steg (och förlorar sin positionering) under hastiga accelerationer och förändringar i rörelseriktning. När detta händer så resulterar det oftast i misslyckade utskrifter. Den presenterade lösningen för det här är att fortsätta justera mjukvaruinställningarna tills finare och mer kontrollerade rörelsemönster uppnås. En annan tänkbar lösning är att byta ut motorerna mot starkare varianter. Vid leverans så nyttjar maskinen toppmoderna komponenter och mjukvara, från framstående svenska och internationella producenter. En intervju med Isak Emericks tillsammans med 3D skrivaren hittas i Bilaga B, i formen av ett nyhetsbrev.
Kota, Vasuman. « Rasters vs Contours For Thin Wall ULTEM 9085 FDM Applications ». Wright State University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=wright1567029612963881.
Texte intégralSauter, Barrett. « Ultra-light weight design through additive manufacturing ». Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-45160.
Texte intégralFerri, Martina. « Studio di nanocompositi di TPU/grafene per additive manufacturing ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/24385/.
Texte intégralAhmadifar, Mohammad. « Etude de la rhéologie des composites polymères au cours du procédé FDM (Fabrication additive) ». Thesis, Paris, HESAM, 2021. http://www.theses.fr/2021HESAE072.
Texte intégralAdditive manufacturing (AM) is a novel technology that enables rapid fabrication of physical models directly from 3D computer-aided design (CAD) data without any conventional tooling or programming requirement. Thermoplastic polymers are the most useful materials for the manufacturing of parts in the FFF process. In this process, extrusion of a semi-molten road through a nozzle is taken place to form each layer, the extruded road solidifies quickly due to the existence of temperature gradient between the surroundings and the extrusion temperature. Different key parameters affect the final products manufactured by this process. These parameters can be listed in three categories. Some of them are linked to the material, others are linked either to the characteristics of the process or to the specificity of the machine. They can influence the properties of the final part through their effect on various physical phenomena. The mentioned parameters affect the polymer temperature and its evolution. It is important to know the evolution of filaments temperature with time and recognize how it is affected by major process variables as mentioned. Due to the nature of the FFF process, it is important to measure the temperature profile and its evolution during the process by the means of local measurement methods. The idea of this work took place in 2018, by start reviewing literatures related to the FFF process. As mentioned, almost all studies and works either numerical or experimental approaches were based on global consideration. In the beginning, the work was concentrated on finding a method to be applied to the FFF process to proceed with the localized investigation. Afterward, the experiment was started to see the possibility of the work. As in the FFF process, there is a deposition of filaments, and each filament itself is heated by the deposition of newer filaments, there is almost a cyclic evolution of the temperature due to multi-layer d eposition and it means that each filament is re-heated consequently because of the deposition of a new filament. This is a critical issue in creating a filament bonding and diffusion of materials. To implement and measure this cyclic temperature, it is required to apply a measurement device in which to be capable of measuring the temperature of the polymer when leaving the nozzle. One can note that the mechanical properties of 3d-printed pieces are limited. In this work, we try to improve the mechanical properties by reinforcing the fibers such as glass fibers, carbon fibers, etc. At the same time by controlling the temperature evolution, we try to improve the adhesion between the layers to have the best structure. The used material as raw material was polyamide-6 (PA6). The main objective of this research is to study the rheological characteristics of materials during FDM/FFF to process optimization for mechanical characterization improvement of the fabricated parts. Therefore, the main objective is to take into account both the temperature and viscosity parameters, and to establish the Time-Temperature-Transformation diagram for process optimization. This helps to determine the processability area
Capriotti, Marco. « Utilizzo di scarti agroalimentari nella produzione di biocompositi per additive manufacturing ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022. http://amslaurea.unibo.it/25767/.
Texte intégralBernardi, Alberto. « Controllo di un dispositivo di alimentazione filo per una stampante FDM ». Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2021.
Trouver le texte intégralGuglieri, Alessandro. « Design ed ottimizzazione strutturale di un APR realizzato con tecnologie additive ». Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/23557/.
Texte intégralLivres sur le sujet "Additive manufacturing (FDM)"
Singh, Rupinder, et J. Paulo Davim. Additive Manufacturing. Taylor & Francis Group, 2021.
Trouver le texte intégralSingh, Rupinder, et J. Paulo Davim. Additive Manufacturing : Applications and Innovations. Taylor & Francis Group, 2018.
Trouver le texte intégralSingh, Rupinder, et J. Paulo Davim. Additive Manufacturing : Applications and Innovations. Taylor & Francis Group, 2018.
Trouver le texte intégralSingh, Rupinder, et J. Paulo Davim. Additive Manufacturing : Applications and Innovations. Taylor & Francis Group, 2018.
Trouver le texte intégralChapitres de livres sur le sujet "Additive manufacturing (FDM)"
Henry, Silke, Valérie Vanhoorne et Chris Vervaet. « Fused Deposition Modeling (FDM) of Pharmaceuticals ». Dans Additive Manufacturing in Pharmaceuticals, 45–96. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2404-2_2.
Texte intégralBoualaoui, Abderrazak, Driss Sarsri et Mohammed Lamrhari. « Topological Optimization for Fused Deposition Modeling (FDM) Process ». Dans Springer Tracts in Additive Manufacturing, 127–36. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32927-2_12.
Texte intégralSandhu, Gurleen Singh, et Rupinder Singh. « Development of ABS-Graphene Blended Feedstock Filament for FDM Process ». Dans Additive Manufacturing of Emerging Materials, 279–97. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91713-9_9.
Texte intégralÇolak, Oğuz, et Anar Abbasov. « Experimental Investigation of Recycled Pet Materials Fdm Process Parameters Using Taguchi Analysis ». Dans Springer Tracts in Additive Manufacturing, 3–10. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32927-2_1.
Texte intégralTaufik, Mohammad, et Prashant K. Jain. « Development and Analysis of Accurate and Adaptive FDM Post-finishing Approach ». Dans 3D Printing and Additive Manufacturing Technologies, 59–71. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0305-0_6.
Texte intégralSaxena, Piyush, et R. M. Metkar. « Development of Electrical Discharge Machining (EDM) Electrode Using Fused Deposition Modeling (FDM) ». Dans 3D Printing and Additive Manufacturing Technologies, 257–68. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0305-0_22.
Texte intégralAzzouzi, Adil El, Hamid Zaghar, Mohammed Sallaou et Larbi Lasri. « Effects of Build Orientation and Raster Angle on Surface Roughness and Mechanical Strength of FDM Printed ABS ». Dans Springer Tracts in Additive Manufacturing, 51–60. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32927-2_5.
Texte intégralSbriglia, Lexey R., Andrew M. Baker, James M. Thompson, Robert V. Morgan, Adam J. Wachtor et John D. Bernardin. « Embedding Sensors in FDM Plastic Parts During Additive Manufacturing ». Dans Topics in Modal Analysis & ; Testing, Volume 10, 205–14. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30249-2_17.
Texte intégralLiu, Yizhuo, et Hao Hua. « Translucent Tectonics : Lightweight Floor Slab System Based on FDM Manufacturing ». Dans Computational Design and Robotic Fabrication, 503–14. Singapore : Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8405-3_42.
Texte intégralMukhopadhyay, Premangshu, et Bipradas Bairagi. « A New Non Linear Fuzzy Approach (NLFA) for Performance Evaluation of FDM Based 3D Printing Materials ». Dans Additive Manufacturing in Multidisciplinary Cooperation and Production, 157–70. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-37671-9_14.
Texte intégralActes de conférences sur le sujet "Additive manufacturing (FDM)"
Patterson, Albert E., Seymur Hasanov et Bhaskar Vajipeyajula. « Influence of Matrix Material on Impact Properties of Chopped Carbon Fiber-Thermoplastic Composites Made Using FDM/FFF ». Dans 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-88941.
Texte intégralSingh, Hargurdeep, Farzad Rayegani et Godfrey Onwubolu. « Cost Optimization of FDM Additive Manufactured Parts ». Dans ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-36697.
Texte intégralWu, Dazhong, Yupeng Wei et Janis Terpenny. « Surface Roughness Prediction in Additive Manufacturing Using Machine Learning ». Dans ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6501.
Texte intégralRayegani, Farzad, Godfrey C. Onwubolu, Attila Nagy et Hargurdeep Singh. « Functional Prototyping and Tooling of FDM Additive Manufactured Parts ». Dans ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-37828.
Texte intégralNing, Fuda, Weilong Cong, Zhenyuan Jia, Fuji Wang et Meng Zhang. « Additive Manufacturing of CFRP Composites Using Fused Deposition Modeling : Effects of Process Parameters ». Dans ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8561.
Texte intégralRiemenschneider, Johannes, Rytis Mitkus et Srinivas Vasista. « Integration of Actuators by Additive Layer Manufacturing ». Dans ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3764.
Texte intégralGuo, Liang, Yunxi Cheng, Yu Zhang, Yingfu Liu, Changcheng Wan et Jing Liang. « Development of Cloud-Edge Collaborative Digital Twin System for FDM Additive Manufacturing ». Dans 2021 IEEE 19th International Conference on Industrial Informatics (INDIN). IEEE, 2021. http://dx.doi.org/10.1109/indin45523.2021.9557492.
Texte intégralSilva, Ricardo Júnior de Oliveira, Natália Pereira de Azevedo et Fabiano Oscar Drozda. « Dimensional Precision of Abs Parts Manufactured By Additive Manufacturing in FDM Technology ». Dans The 8th World Congress on Mechanical, Chemical, and Material Engineering. Avestia Publishing, 2022. http://dx.doi.org/10.11159/icmie22.101.
Texte intégralChee, Zhen Qi, Zi Jie Choong et Wai Leong Eugene Wong. « Digitization of Fused Deposited Methods (FDM) Printer for Smart Additive Manufacturing (AM) ». Dans 2021 24th International Conference on Mechatronics Technology (ICMT). IEEE, 2021. http://dx.doi.org/10.1109/icmt53429.2021.9687227.
Texte intégralChen, Roland K., Terris T. Lo, Lei Chen et Albert J. Shih. « Nano-CT Characterization of Structural Voids and Air Bubbles in Fused Deposition Modeling for Additive Manufacturing ». Dans ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9462.
Texte intégral