Literatura académica sobre el tema "Zhao shang ju"

We report on thermal analysis and a continuous wave (CW) laser operation at (1.998µm) of end pumped Tm: YAP cylindrical laser rod. The Tm: YAP laser rod is pumped at a wavelength of 1.064 µm emitting from Nd: YAG laser source. A 3W incident pump power is used to generate a maximum laser output of 700 mW, representing 18% slope efficiency. The power of thermally induced lens in Tm:YAP laser rod is numerically analyzed and validated experimentally. The focal lengths of the thermally induced lens are directly measured using Shack-Hartmann wavefront sensor. We have detected blue up-conversion fluorescence emission before laser operation at 1.998 µm. The obtained experimental results were in good agreement with the numerical calculations. Full Text: PDF ReferencesI. F. Elder, J. Payne, "Diode-pumped, room-temperature Tm:YAP laser", Applied Optics 36 (33), 8606 (1997) CrossRef Y. Li, B. Yao, Y. Wang, Y. Ju, G. Zhao, Y. Zong, J. Xu, "High efficient diode-pumped Tm:YAP laser at room temperature", Chinese Opt. Lett. 5 (5), 286 (2007). DirectLink H. Ni, S. C. Rand, "Avalanche upconversion in Tm:YALO3", Opt. Lett. 16 (8), 1424 (1991). CrossRef Z. G. Wang, C. W. Song, Y. F. Li, Y. L. Ju, Y. Z. Wang, "CW and pulsed operation of a diode-end-pumped Tm:GdVO4 laser at room temperature", Laser Phys. Lett. 6 (2), 105 (2009). CrossRef Baoquan Yao, Yi Tian, Wei Wang, Gang Li, Yuezhu Wang, "Analysis and compensation of thermal lens effects in Tm:YAP lasers", Chinese Opt. Lett. 8 (10), 996 (2010). CrossRef F. Cornacchia, D. Parisi, C. Bernardini, M. Toncelli, "Efficient, diode-pumped Tm3+:BaY2F8 vibronic laser", Opt. Expr. 12 (9), 1982 (2004). CrossRef Xiaojin Cheng, Mi Fan, Jiandong Cao, Jianhua Shang, "Research on the thermal effect and laser resonator of diode-pumped thin-slab Tm:YAP lasers", Optik 176, 32 (2019). CrossRef W. Koechner, Solid-state Laser Engineering, Springer, (2013). DirectLink https://www.crytur.cz DirectLink http://www.laserlabcomponents.com/ DirectLink R. M. El-Agmy, N.AlHosiny, "2.31 [micro sign]m laser under up-conversion pumping at 1.064 [micro sign]m in Tm3+:ZBLAN fibre lasers", Elect. Lett. 46 (13), 936 (2010). CrossRef R. M. El-Agmy, N. M. Al-Hosiny, "870 mW blue laser emission at 480 nm in a large core thulium doped ZBLAN fiber laser", Laser Phys. 20 (4), 838 (2010). CrossRef R. M. El-Agmy, N. M. Al-Hosiny, "Power scaling of end-pumped Nd:YLF lasers, modeling and experiments", Optik 140, 584 (2017). CrossRef R. M. El-Agmy, N. Al-Hosiny, "Thermal analysis and experimental study of end-pumped Nd: YLF laser at 1053 nm", Photonic sensors 7 (4), 329 (2017). CrossRef S. C. Tidwell, J. F. Seamans, M. S. Bowers, A. K. Cousins, "Scaling CW diode-end-pumped Nd:YAG lasers to high average powers", IEEE J. Quantum Electron. 28, 997 (1992). CrossRef P. J. Hardman, W. A. Clarkson, G. J. Friel, M. Pollnau, D. C. Hanna, "Energy-transfer upconversion and thermal lensing in high-power end-pumped Nd:YLF laser crystals", IEEE Journal of Quantum Electronics 35, 647 (1999). CrossRef

Показана возможность синтеза соединений Cu2SnS3 и Cu2SnSe3 на стеклянных подложках путём отжига в парах халькогена тонкой металлической плёнки сплава Cu:Sn = 2:1 в вакуумной графитовой камере типа квазизамкнутого объёма. Методом рентгеновской дифракции установлено, что полученные плёнки халькогенидов имеют подобную сфалериту кристаллическую структуру. Для кубической модификации Cu2SnS3 и Cu2SnSe3 преимущественными плоскостями отражений являются (111), (220) и (311). Элементный состав плёнок соответствует стехиометрии соединений Cu2SnS3 и Cu2SnSe3. Методом ИК-спектроскопии определены энергии активации прямозонных переходов для Cu2SnS3 – 0.96 eV, а для Cu2SnSe3 – 0.70 eV. ИСТОЧНИК ФИНАНСИРОВАНИЯ Работа выполнена при финансовой поддержке гранта РФФИ № 18-32-00971 – мол_а. ЛИТЕРАТУРА Milichko V. A., Shalin A. S., Mukhin I. S., et al. Usp., 2016, vol. 59, pp. 727–772. https://doi.org/10.3367/ufne.2016.02.037703 Wesley Herche. Renewable and Sustainable Energy Reviews, 2017, vol. 77, pp. 590-595. https://doi.org/10.1016/j.rser.2017.04.028 Rujun Suna, Daming Zhuang, Ming Zhao, et al. Solar Energy Materials and Solar Cells, 2018, vol. 174, pp. 42–49. https://doi.org/10.1016/j.solmat.2017.08.011 Orletskii I. G., Mar’yanchuk P. D., Solovan M. N., et al. Physics of the Solid State, 2016. vol. 58, no. 5, pp. 1058-1064. https://doi.org/10.1134/s1063783416050188 Ren Y. Acta Universitatis Upsaliensis, Uppsala, 2017, 85 p. URL: https://uu.diva-portal.org/smash/get/diva2:1072439/FULLTEXT01.pdf Lokhande A. C. Solar Energy Materials and Solar Cells, August 2016, vol. 153, pp. 84-107. https://doi.org/10.1016/j.solmat.2016.04.003 Shelke H. D., Lokhande A. C., Patil A. M., et al. Surfaces and Interfaces, 2017, vol. 9, pp. 238-244. https://doi.org/10.1016/j.surfin.2017.08.006 Orletskii I. G., Solovan M. N., Pinna F., et al. Physics of the Solid State. 2017, vol. 59, no. 4, pp. 801-807. https://doi.org/10.1134/s1063783417040163 Mingrui He. Journal of Alloys and Compounds, April 2017, vol. 701, pp. 901-908. https://doi.org/10.1016/j.jallcom.2017.01.191 Pin-Wen, GuanShun-Li Shang, Greta Lindwall. Solar Energy, 2017, vol. 155, pp. 745-757. https://doi.org/10.1016/j.solener.2017.07.017 Ju Yeon Lee. Solar Energy, 2017, vol. 145, pp. 27-32. https://doi.org/10.1016/j.solener.2016.09.041 Subbotina, O. Y., Kishkoparov N. V., Frishberg I. V. High Temperature, 1999, vol. 37, no. 2, pp. 198–203. URL: http://www.mathnet.ru/php/archive.phtml?wshow=paper&jrnid=tvt&paperid=2266&option_lang=rus (in Russ.) Budanov A. V., Vlasov Yu. N., Grechkina M. V., et al. Condensed Matter and Interphases, 2016, vol. 18, no. 4, pp. 481–486. URL: http://www.kcmf.vsu.ru/resources/t_18_4_2016_004.pdf (in Russ.) Zhang, Huang L. L., Zhu X. G., et al. Scripta Materialia, 2019, vol. 159, pp. 46–50. https://doi.org/10.1016/j.scriptamat.2018.09.010 Lukashev P., Lambrecht W. R. L., Kotani T., Schilfgaarde M. Rev. B: Condens. Matter Mater. Phys., 2007, vol. 76, p. 195202. https://doi.org/10.1103/physrevb.76.195202

The journal is pleased to publish the abstracts of the six finalists of the 2023 Manufacturing and Service Operations Management Society’s student paper competition. The 2023 prize committee was chaired by Ersin Korpeoglu (UCL), Simone Marinesi (Wharton), and Nur Sunar (UNC). The judges were Adam Elmachtoub, Adem Orsdemir, Agni Orfanoudaki, Alper Nakkas, Amrita Kundu, Antoine Desir, Antoine Feylessoufi, Anton Ovchinnikov, Anyan Qi, Arian Aflaki, Arzum Akkas, Ashish Kabra, Auyon Siddiq, Bilal Gokpinar, Bin Hu, Bob Batt, Bora Keskin, Brent Moritz, Can Zhang, Chloe Glaeser, Cuihong Li, Daniel Freund, Daniel Lin, David Drake, Divya Singhvi, Dongyuan Zhan, Ekaterina Astashkina, Elena Belavina, Elodie Adida, Emre Nadar, Enis Kayis, Fabian Sting, Fanyin Zheng, Fei Gao, Florin Ciocan, Francisco Castro, George Chen, Georgina Hall, Gloria Urrea, Gonzalo Romero, Guihua Wang, Guoming Lai, Heikki Peura, Hessam Bavafa, Hummy Song, Huseyin Gurkan, Ioannis Stamatopoulos, Iris Wang, Jiankun Sun, Jiayi Joey Yu, Jing Wu, Joel Wooten, John Silberholz, Jonas Oddur Jonasson, Jonathan Helm, Jose Guajardo, Junyu Cao, Kaitlin Daniels, Karen Zheng, Ken Moon, Kostas Bimpikis, Lennart Baardman, Lesley Meng, Lina Song, Luyi Yang, Mazhar Arikan, Mehmet Ayvaci, Meng Li, Mengzhenyu Zhang, Miao Bai, Michael Freeman, Mika Sumida, Ming Hu, Morvarid Rahmani, Mostafa Rezaei, Mumin Kurtulus, Nan Yang, Nazli Sonmez, Negin Golrezaei, Nektarios Oraiopoulos, Nikhil Garg, Nikos Trichakis, Nil Karacaoglu, Olga Perdikaki, Onesun Steve Yoo, Ovunc Yilmaz, Ozan Candogan, Panos Markou, Pengyi Shi, Philipp Cornelius, Qiuping Yu, Renyu Zhang, Robert Bray, Ruth Beer, Ruxian Wang, Saed Alizamir, Safak Yucel, Sanjith Gopalakrishnan, Santiago Gallino, Sarah Yini Gao, Scott Rodilitz, Sebastien Martin, Seyed Emadi, Sheng Liu, Shouqiang Wang, Siddharth Singh, Sidika Candogan, Sina Khorasani, So Yeon Chun, Somya Singhvi, Soo-Haeng Cho, Sriram Dasu, Stefanus Jasin, Stephen Leider, Suresh Muthulingam, Sytske Wijnsma, Taghi Khaniyev, Tian Chan, Tim Kraft, Tom Tan, Tugce Martagan, Vasiliki Kostamj, Velibor Misic, Vishal Agrawal, Xiaojia Guo, Xiaoshuai Fan, Xiaoyang Long, Yannis Bellos, Yao Cui, Yehua Wei, Yiangos Papanastasiou, Yi-Chun Chen, Yinghao Zhang, Ying-Ju Chen, Yinghao Zhang, Yuan-Mao Kao, Yuexing Li, Zhaohui (Zoey) Jiang, Zhaowei She, and Zumbul Atan.