Literatura académica sobre el tema "WATER LOADED NANOFLUID"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "WATER LOADED NANOFLUID".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "WATER LOADED NANOFLUID"
Prabu, M., D. Kulandaivel, K. Ramesh y M. Shoban Babu. "Numerical Heat Transfer Analysis of Ag-Doped- CuO Nanofluids in Radiator with UDF codes in Ansys fluent". International Journal for Research in Applied Science and Engineering Technology 11, n.º 1 (31 de enero de 2023): 1073–80. http://dx.doi.org/10.22214/ijraset.2023.48762.
Texto completoAlhummiany, H. "Novel Nanofluid Based on Water-Loaded Delafossite CuAlO2 Nanowires: Structural and Thermal Properties". Journal of Nanomaterials 2018 (2018): 1–6. http://dx.doi.org/10.1155/2018/4076960.
Texto completoRudrabhiramu, Rokkala, Kiran Kumar Kupireddi y Kuchibotla Mallikarjuna Rao. "Study of Thermal Characteristics Augmentation of the Aluminium Oxide Nano Fluid with Different Base Fluids". International Journal of Heat and Technology 39, n.º 6 (31 de diciembre de 2021): 2000–2005. http://dx.doi.org/10.18280/ijht.390639.
Texto completoLanjewar, Abhishek, Bharat Bhanvase, Divya Barai, Shivani Chawhan y Shirish Sonawane. "Intensified Thermal Conductivity and Convective Heat Transfer of Ultrasonically Prepared CuO–Polyaniline Nanocomposite Based Nanofluids in Helical Coil Heat Exchanger". Periodica Polytechnica Chemical Engineering 64, n.º 2 (3 de junio de 2019): 271–82. http://dx.doi.org/10.3311/ppch.13285.
Texto completoKumar, P. Manoj, Rajasekaran Saminathan, Mohammed Tharwan, Haitham Hadidi, P. Michael Joseph Stalin, G. Kumaresan, S. Ram et al. "Study on Sintered Wick Heat Pipe (SWHP) with CuO Nanofluids under Different Orientation". Journal of Nanomaterials 2022 (25 de agosto de 2022): 1–12. http://dx.doi.org/10.1155/2022/7158228.
Texto completoAlhummiany, H. "Corrigendum to “Novel Nanofluid Based on Water-Loaded Delafossite CuAlO2 Nanowires: Structural and Thermal Properties”". Journal of Nanomaterials 2018 (19 de julio de 2018): 1. http://dx.doi.org/10.1155/2018/9583485.
Texto completoSannad, Mohamed, Ahmed Kadhim Hussein, Awatef Abidi, Raad Z. Homod, Uddhaba Biswal, Bagh Ali, Lioua Kolsi y Obai Younis. "Numerical Study of MHD Natural Convection inside a Cubical Cavity Loaded with Copper-Water Nanofluid by Using a Non-Homogeneous Dynamic Mathematical Model". Mathematics 10, n.º 12 (15 de junio de 2022): 2072. http://dx.doi.org/10.3390/math10122072.
Texto completoSahota, Lovedeep, Swati Arora, Harendra Pal Singh y Girijashankar Sahoo. "Thermo-physical characteristics of passive double slope solar still loaded with MWCNTs and Al2O3-water based nanofluid". Materials Today: Proceedings 32 (2020): 344–49. http://dx.doi.org/10.1016/j.matpr.2020.01.600.
Texto completoMourad, Abed, Aissa Abderrahmane, Obai Younis, Riadh Marzouki y Anas Alazzam. "Numerical Simulations of Magnetohydrodynamics Natural Convection and Entropy Production in a Porous Annulus Bounded by Wavy Cylinder and Koch Snowflake Loaded with Cu–Water Nanofluid". Micromachines 13, n.º 2 (26 de enero de 2022): 182. http://dx.doi.org/10.3390/mi13020182.
Texto completoMannu, Rashmi, Vaithinathan Karthikeyan, Murugendrappa Malalkere Veerappa, Vellaisamy A. L. Roy, Anantha-Iyengar Gopalan, Gopalan Saianand, Prashant Sonar et al. "Facile Use of Silver Nanoparticles-Loaded Alumina/Silica in Nanofluid Formulations for Enhanced Catalytic Performance toward 4-Nitrophenol Reduction". International Journal of Environmental Research and Public Health 18, n.º 6 (15 de marzo de 2021): 2994. http://dx.doi.org/10.3390/ijerph18062994.
Texto completoTesis sobre el tema "WATER LOADED NANOFLUID"
DHARAMVEER. "ENERGY AND EXERGY ANALYSES OF ACTIVE SOLAR STILLS USING WATER LOADED NANOFLUID". Thesis, 2022. http://dspace.dtu.ac.in:8080/jspui/handle/repository/19091.
Texto completoYu-HuiChiou y 邱育慧. "Conjugate cooling characteristics of Al2O3-water nanofluid flow in a rectangular mini-channel under steady/sudden-pulsed power load– A numerical simulation". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/99988588244550335256.
Texto completo國立成功大學
機械工程學系
104
In this study, we use numerical simulation method to discuss the conjugation cooling characteristics of Al2O3 nanofluid flow in a rectangular mini-channel. The aim of the present study is to discuss the results of two cases; the first case is to investigate the influence of buoyancy to the temperature and velocity in the mini-channel with/without thermal buoyancy effect. The second one is to investigate the effect of impeding the dramatic change in temperature under sudden pulsed power load with ceiling embedded with/without Micro-Encapsulated Phase Change Material (MEPCM). The geometries of the mini-channel are 4.016 mm in width, 1.004 mm in height, and 74.2 mm in length with the fin thickness of 2.008 mm. In order to describe the three dimensional heat transfer and fluid flows of the water-based suspensions in a single mini-channel, pseudo vorticity velocity formulation and energy equation are coupled to solve the temperature and velocity profile in the mini-channel. Numerical simulations for the laminar forced convection in mini-channel have been performed with parameters in the following ranges: the volumetric fraction of Al2O3 nanofluid, and ; the volumetric flow rate entering mini-channel, (equivalently, ); and the heat flux imposed on the bottom surface of the rectangular mini-channel . The diameter of the particle in Al2O3 nanofluid is 20 nm. The mini-channel is iso-flux heated with heat flux of and on the bottom, and the heat flux of the rectangular mini-channel is . The numerical results obtained for the channel with ARch = 0.25, ARbw =0.5, ARcw = 0.5, and Wsw = 0.5 clearly reveal that using the Al2O3 nanofluid to replace the pure water as the coolant in the rectangular mini-channel can reduce the bulk mean temperature in the fluid, enhance the averaged heat transfer coefficient, and reduce the overall resistance in the rectangular mini-channel, respectively. Al2O3 nanofluid has greater thermal conductivity than pure water and the thermal conductivity increases with increasing concentration. With the thermal buoyancy effect, the bulk mean temperature of the fluid is 1°C lower than that without the effect and the averaged heat transfer coefficient is enhanced about 5.2%. Furthermore, the thermal buoyancy effect reduces overall thermal resistance in the rectangular mini-channel about 3.5%. Plus, lower Reynolds number leads to greater difference in temperature and heat transfer coefficient.With sudden pulsed power load, the ceiling temperature with MEPCM is 2°C lower than that without MEPCM; however, the bulk mean temperature of the fluid reduces only 0.2°C.
Jian-ChinLiao y 廖健欽. "Heat Dissipation Characteristics of Al2O3-Water Nanofluid Flow in a Mini-Channel Heat Sink under Steady/Surged heat Load - An Experimental Study". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/52350667253379135310.
Texto completo國立成功大學
機械工程學系
104
The present study aims to investigate an experimental study concerning forced convective heat dissipation characteristics of Al2O3-water nanofluid flow in a mini-channel heat sink under steady/sudden-pulsed power load. Two multi-channel heat sinks featuring a length of 50 mm and a width of 25.1 mm were fabricated of oxygen-free copper with eight parallel mini-channels, each with an inlet cross-section of 1 mm in width and 3 mm in height with their ceiling embedded with or without a layer of a microencapsulated phase change material (MEPCM). The steady state experimental results obtained reveal that using the Al2O3-water nanofluid to replace the pure water as the coolant through the mini-channel heat sink can give rise to an enhancement of 41%, in the average heat transfer coefficient over that of using the pure water. In the aspect of incorporating the heat sink with its ceiling embedded MEPCM layer and hence the potential latent heat absorption effect, the steady state forced convection results reveal somewhat insignificant effects on cooling performance of Al2O3-water nanofluid. On the other hand, under the sudden-pulsed heat loads, the cooing effectiveness of using the Al2O3-water nanofluid in the heat sink with ceiling embedded MEPCM layer appears further uplifted in comparison with that without embedded MEPCM layer.
Capítulos de libros sobre el tema "WATER LOADED NANOFLUID"
Singh, Desh Bandhu y G. N. Tiwari. "Thermal Modeling of Solar Stills". En Solar Thermal Systems: Thermal Analysis and its Application, 90–153. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815050950122010007.
Texto completoActas de conferencias sobre el tema "WATER LOADED NANOFLUID"
Li, Jie, Clement Kleinstreuer y Yu Feng. "Computational Analysis of Thermal Performance and Entropy Generation of Nanofluid Flow in Microchannels". En ASME 2012 Third International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/mnhmt2012-75007.
Texto completoShit, Sakti Pada, N. K. Ghosh y Sudipta Pal. "Thermal conductivity of water base nanofluids containing loaded graphene nanosheets using molecular dynamics simulation". En 3RD INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC-2019). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0001590.
Texto completoVishwakarma, Vivek, Nitin Singhal, Vikrant Khullar, Himanshu Tyagi, Robert A. Taylor, Todd P. Otanicar y Ankur Jain. "Space Cooling Using the Concept of Nanofluids-Based Direct Absorption Solar Collectors". En ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87726.
Texto completo