Literatura académica sobre el tema "Thermomechanical Analysi"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Thermomechanical Analysi".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Thermomechanical Analysi"
Skubisz, Piotr, Marek Packo, Katarzyna Mordalska y Tadeusz Skowronek. "Effect of High Strain-Rate Thermomechanical Processing on Microstructure and Mechanical Properties of Ti-10V-2Fe-3Al Alloy". Advanced Materials Research 845 (diciembre de 2013): 96–100. http://dx.doi.org/10.4028/www.scientific.net/amr.845.96.
Texto completoNava, Marcelo, Pedro Cunha de Lima y Emmanuel Pacheco Rocha Lima. "Influence of the Deep Cryogenic Treatment at the Phase Transformation Temperatures and at the Stabilization of the Cu-14Al-4Ni SMA Alloy". Materials Science Forum 1012 (octubre de 2020): 331–36. http://dx.doi.org/10.4028/www.scientific.net/msf.1012.331.
Texto completoShim, Kyu-Sang, Soram Oh, KeeYeon Kum, Yu-Chan Kim, Kwang-Koo Jee y Seok Woo Chang. "Mechanical and Metallurgical Properties of Various Nickel-Titanium Rotary Instruments". BioMed Research International 2017 (2017): 1–13. http://dx.doi.org/10.1155/2017/4528601.
Texto completoPonomarev, Viktor S., Alexander V. Gerasimov, Sergey V. Ponomarev y Denis O. Shendalev. "Spacecraft reflectors thermomechanical analysis". EPJ Web of Conferences 82 (2015): 01005. http://dx.doi.org/10.1051/epjconf/20158201005.
Texto completoPrice, D. M. "Modulated-temperature thermomechanical analysis". Journal of Thermal Analysis and Calorimetry 51, n.º 1 (enero de 1998): 231–36. http://dx.doi.org/10.1007/bf02719024.
Texto completoPrice, Duncan M. "Modulated-temperature thermomechanical analysis". Thermochimica Acta 357-358 (agosto de 2000): 23–29. http://dx.doi.org/10.1016/s0040-6031(00)00360-9.
Texto completoBiałowąs, Barbara y Karol Szymanowski. "Effect of thermomechanical densification of pine wood (Pinus sylvestris L.) on cutting forces and roughness during milling". Annals of WULS, Forestry and Wood Technology 113 (31 de marzo de 2021): 36–42. http://dx.doi.org/10.5604/01.3001.0015.2330.
Texto completoBRISCHETTO, S. y E. CARRERA. "THERMOMECHANICAL EFFECT IN VIBRATION ANALYSIS OF ONE-LAYERED AND TWO-LAYERED PLATES". International Journal of Applied Mechanics 03, n.º 01 (marzo de 2011): 161–85. http://dx.doi.org/10.1142/s1758825111000920.
Texto completoCollins, Jeff T., Jeremy Nudell, Gary Navrotski, Zunping Liu y Patric Den Hartog. "Establishment of new design criteria for GlidCop® X-ray absorbers". Journal of Synchrotron Radiation 24, n.º 2 (20 de febrero de 2017): 402–12. http://dx.doi.org/10.1107/s1600577517001734.
Texto completoOsetskyi, Oleksandr, Tetyana Gurina, Anna Poliakova y Stanislav Sevastianov. "Thermoplastic Analysis of Cluster Crystallization of Cryoprotective Solutions". Problems of Cryobiology and Cryomedicine 31, n.º 3 (25 de septiembre de 2021): 203–13. http://dx.doi.org/10.15407/cryo31.03.203.
Texto completoTesis sobre el tema "Thermomechanical Analysi"
TERNER, MATHIEU. "Innovative materials for high temperature structural applications: 3rd Generation γ-TiAl fabricated by Electron Beam Melting". Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2527509.
Texto completoLe, Gall Carole A. "Thermomechanical stress analysis of flip chip packages". Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/16002.
Texto completoJiang, Jian. "Nonlinear thermomechanical analysis of structures using OpenSees". Thesis, University of Edinburgh, 2013. http://hdl.handle.net/1842/7749.
Texto completo), Lerch Andrew (Andrew J. "Thermomechanical analysis of innovative nuclear fuel pin designs". Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/58460.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 152-154).
One way to increase the power of a nuclear reactor is to change the solid cylindrical fuel to Internally and Externally Cooled (I&EC) annular fuel, and adjust the flow and the core inlet coolant temperature. The switch to annular fuel allows for a 20% increase in core power density without changing the assembly size or the control rod placement. Such an approach is being considered for the Korean reactor OPR1400. The analysis of I&EC fuel with a modified version of FRAPCON-3.3 revealed that an uneven heat flux split between the outer and inner surfaces may develop which does not yield an optimal design. After optimization, it is found that excessive cladding oxidation on the inner channel of the hottest fuel pin may occur due to excessive internal heat flux, which is controlled by the gap conductance. As the gaps close asymmetrically, the MDNBR limit of 1.3 could also be violated. At the uprated power, control of the gap sizes is needed in order to satisfy the thermal-hydraulic requirements. One solution is to increase the flow rate to increase the MDNBR and to reduce the coolant temperature to decrease the cladding oxidation. Reduced-moderation Water Reactor (RMWR) is a boiling water reactor proposed to operate with mixed oxide fuel and, a harder neutron spectrum and higher local fuel burnup compared to the traditional Light Water Reactors. The fissile content of the fuel is concentrated in two pancake like regions in the core separated by a blanket (fertile-only) region.
(cont.) The FRAPCON fuel performance code has been modified to assess the behavior of the RMWR fuel pins. Properties were modified to allow for a higher concentration of plutonium oxide. A new mechanistic model was adopted to simulate the fission gas release and swelling behavior of the fuel. The gas bubble swelling at the grain edges and grain faces were modeled separately. In addition, solid fission product swelling model was modified and the effect of axial migration of the volatile fission product behavior on fuel performance was also analyzed. Specifically, the cesium migrates axially based on the evaporation/condensation mechanism. Cesium precipitation at the fuel blanket interface and the resulting excessive swelling of the fuel pin at these locations could potentially be a major source of local stresses. Furthermore, as-fabricated porosity migration, central void formation, and hot-pressing of the fuel pellet were also modeled. Finally, axial variation of the material properties was allowed to represent the active fuel region and the blanket regions. The updated version of FRAPCON (called FRAPCON-EP) was checked against experiments then used to analyze the RMWR fuel behavior to optimize various parameters such the fuel pellet smear density, plenum height, and achievable peak burnup in order to achieve performance that could satisfy the NRC requirements for fuel pins.
by Andrew Lerch.
S.M.
Brevus, Vitaly. "Analysis of structural elements' integrity after thermomechanical loading". Thesis, Clermont-Ferrand 2, 2014. http://www.theses.fr/2014CLF22443.
Texto completoThis thesis was performed under the cotutelle agreement between Ternopil Ivan Pul’uj National Technical University (TNTU, Ukraine) and Blaise Pascal University (Clermont Ferrand, France). The thesis was carried out within Pascal Institute of the Blaise Pascal University - Clermont II, the IFMA and the CNRS, in the Scientific Theme “Active and Smart Materials and Multiscale Modeling” of the Mechanics, Materials and Structures Department, and within the French Institute for Advanced Mechanics. The presented thesis belongs to the scientific field of fracture mechanics and material science. The aim of the thesis is to develop the analytical and experimental methodology for the residual lifetime estimation of the superheater collectors at thermal power stations (TPS), taking into account the operational features of thermomechanical loading. Prediction of lifetime is crucial task for continuous operation of heavy loaded structural elements and is a part of a broader problem, covered in the research of the strength and durability of high temperature structural elements in power-generating equipment. The thesis describes the influence of operating temperature on the fatigue crack growth rate and fracture micromechanisms in the material of the superheater collector
Zhang, Chunbo. "A Thermomechanical Analysis of An Ultrasonic Bonding Mechanism". DigitalCommons@USU, 2011. https://digitalcommons.usu.edu/etd/1021.
Texto completoPACHECO, PEDRO MANUEL CALAS LOPES. "ANALYSIS OF THE THERMOMECHANICAL COUPLING IN ELASTIC-VISCOPLASTIC MATERIALS". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1994. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=33223@1.
Texto completoA modelagem do acoplamento entre os fenômenos mecânicos e térmicos em sólidos inelásticos é considerada neste trabalho. O acoplamento termomecânico é importante em determinadas situações, como por exemplo, no estudo de problemas envolvendo deformações inelásticas cíclicas em estruturas metálicas. Um procedimento sistemático para obtenção de equações constitutivas termodinamicamente admissíveis é apresentado. Através deste procedimento, baseado na Termodinâmica dos Processos Irreversíveis, foi possível obter uma teoria constitutiva para modelar o comportamento anisotérmico de metais e ligas metálicas. Dois tipos de acoplamentos termomecânicos foram identificados: o acoplamento interno, associado à dissipação interna do processo mecânico, e o térmico, associado à dependência dos parâmetros das equações constitutivas com a temperatura. A teoria foi particularizada para materiais elasto-viscoplásticos. Simulações com barras foram realizadas para estudar fenômenos como o aquecimento de metais provocado por solicitações mecânicas complexas e o comportamento de metais submetidos a grandes gradientes de temperatura. Uma variável de dano foi incorporada ao modelo, permitindo estudar a influência do acoplamento termodinâmico em processos de degradação do material como fadiga de baixo ciclo.
The present work is concerned with the modeling of the coupling between mechanical and termal phenomena. The thermomechanical coupling is important in some problems like those involving inelastic cyclic deformation in metallic structures. A systematic procedure to obtain thermodynamically admissible constitutive equations is presented. Such procedure has a strong thermodynamic basis and is used to obtain a constant theory to model the anisothermal behavior of metals and alloys. Two kinds of thermomechanical couplings can be identified: the internal coupling, related with the internal dissipation in the mechanical process and the thermal coupling, related with the dependence of the material parameters in the constitutive equations on temperature. The theory is particularized to elasto-viscoplastic materials. Uniaxial simulations were performed to study the heating of metals due to complex mechanical loadings and the behavior of metals subjected to high temperature gradients. A damage variable is introduced in the model to study the influence of the thermomechanical coupling in processes involving the degradation of the material like in low-cycle fatigue.
Bola, Inês Carlos Ramos Almeida. "Development and numerical thermomechanical analysis of an atmospheric burner". Master's thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/23416.
Texto completoAtualmente, a simulação numérica de processos tecnológicos tem cada vez mais importância e é cada vez mais utilizada permitindo não só reproduzir as condições de funcionamento de determinado processo como também possibilita a previsão de possíveis falhas nos materiais. Assim, surgiu o presente trabalho para dar resposta à necessidade de conseguir caracterizar comportamentos mecânicos como a uência e a fadiga, presentes na superfície de alumínio de um queimador atmosférico, e o impacto que podem ter. Para tal, através do software de simulação numérica ANSYS, realizou-se uma análise termomecânica da respetiva superfície de queima. Em primeiro lugar, selecionou-se o modelo numérico de Norton e procedeu-se à identi cação dos respetivos parâmetros com base em duas análises distintas: uma análise analítica, com base apenas em curvas experimentais e relações analíticas; e uma análise numérica, com recurso ao módulo de otimização do ANSYS, em que os parâmetros foram iterativamente de nidos. Posteriormente, as condições fronteiras do problema foram de nidas e foi realizado um estudo de convergência da malha a usar nas simulações. Deste modo, foram obtidos os per s de temperatura, tensão e deformação ao longo da superfície de queima. Por m, considerando os fenómenos de fadiga e de uência, o tempo de vida da superfície do queimador foi estimado com base em métodos de previsão.
Nowadays, the numerical simulation of technological processes is increasingly important and used, allowing to reproduce the operation conditions of a given process and to predict possible failures in materials. Thereby, the present work emerged, to answer the need to characterize mechanical behaviors such as creep and fatigue that are present on the aluminum surface of an atmospheric burner and to understand the impact they can have. For this purpose, the FEA program ANSYS was used to perform a thermomechanical analysis of the respective surface. Firstly, the Norton's numerical model was selected, and the respective parameters were identi ed based on two di erent analyses: an analytical analysis, based only on experimental curves and analytical relationships; and a numerical analysis using the ANSYS optimization module, in which the parameters were iteratively de ned. Then, the boundary conditions of the problem were de ned, and a mesh sensitivity study was carried out. Therefore, the temperature, stress and strain pro les were obtained along the surface. Considering the fatigue and creep phenomena, the lifetime of the burner surface was estimated based on prediction methods.
Arqam, Mohammad. "Thermomechanical analysis of compact high-performance electric swashplate compressor". Thesis, Griffith University, 2021. http://hdl.handle.net/10072/410159.
Texto completoThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Eng & Built Env
Science, Environment, Engineering and Technology
Full Text
Ismail, Dahman y Alexis Andrei. "Thermomechanical stress analysis of the main insulation system of traction electrical machines". Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-20305.
Texto completoMer effektiva tunga fordon utvecklas med högre räckvidd, uppdaterade elektroniska och mekaniska delar. Bränsleeffektiviteten och föroreningen av koldioxid måste vara lägre för att uppnå nya EU-förordningar. Antalet tunga fordon ökar i takt med att den globala befolkningen ökar, detta leder i sin tur till ökad utsläpp av bland annat koldioxid. Genom att ta de elektriska och mekaniska delarna till nästa steg kan de globala utsläppsproblemen minskas massivt. Elektriska maskiner för framdrivning är nästa steg mot en renare framtid. Studiens huvudmål för att undersöka den elektriska maskinens isoleringssystem. Termomekaniska påfrestningar på grund av termisk cykling påverkar de elektriska maskinerna och dess delkomponenter. Genom att använda en FEM-applikation med förenklade modeller av den elektriska maskinen erhålls och diskuteras resultat. Specifikt om 2D-modeller är tillräckliga för att representera en 3D-modell. Hur tillräckligt de olika 2D-modeller kan representera 3D-modellen jämförs och diskuteras i denna studie. Ett fysiskt experiment utförs för att validera och kalibrera FEA-modellerna. Vilken av de mindre frekventa cykler med högre amplitud eller mer frekventa cyckler med lägre amplitud påverkar isoleringssystemet mest har undersökts. Simuleringarna kan göras med antingen, temperatur kopplad förskjutnings analys eller sekventiellt kopplad analys. Temperatur kopplad kopplad förskjutning är den snabbaste metoden att använda i simuleringsmodellerna. En 3D-modell är det bästa sättet att beskriva ett objekt och har därför implementerats. Ytterligare två, 2Dmodeller är framtagna i FEM-miljö för snabbare beräkning och för att undersöka om 2D-modellerna kan representera den tredimensionella geometrin. Samtliga tre modeller har specifika randvillkor för att förenkla modellerna. Känslighetsstudier görs för att bestämma vilken parameter som påverkar de inducerade termomekaniska spänningarna mest. Ett fysiskt experiment har utförsts för att validera och kalibrera simuleringsmodellerna. Resultatet visar att 3D-modellen representerar ett tre dimensonellt objekt bäst. Simuleringsresultat har visat att epoxy, som är en av huvudkomponenterna i isoleringssystemet, är mest kritisk när det gäller att först nå brott- och sträckgräns, följt av pappersisolering och koppar beläggningen. Detta är ett typiskt resultat av alla tre simuleringsmodeller. Slutsatsen visar att vissa 2D-modeller kan presentera 3D-modellen, andra kan inte. Den beroende faktorn beror på ur vilket tvärsnitt man tittar på den elektriska maskinen. Det fysiska experimentet visar liknande resultat jämfört med simuleringen när det gäller belastning vid en lägre temperatur, och avvikelsen blir större när temperaturen ökar. 3D-modellen, är den modell som har den bästa representationen av en riktig elektrisk maskin eftersom den inkluderar normal- och skjuvspänningskomponenter i alla riktningar. Anledningen är att den har bättre randvillkor jämfört med 2Dmodellerna. 2D-modellen i XY-planet har visat liknande resultat som 3D-modellen. En av huvudkomponenterna i isoleringssystemet, epoxy, utsätts för de högsta spänningarna jämfört med dess sträck- och den brottgräns, följt av pappersisolering och koppar beläggning. Känslighetsstudien har kommit fram till att statorns axiella längd inte påverkar spänningsamplituderna. Den mest kritiska parametern som påverkar de termomekaniska spänningarna är temperatur amplituden, materialens CTE och tjockleken på det skarvade skiktet. Alla maximala spänningsamplituder för samtliga tre komponenter är belägna i den fria änden.
Libros sobre el tema "Thermomechanical Analysi"
Non-smooth thermomechanics. Berlin: Springer, 2002.
Buscar texto completoColeman, Bernard D., Martin Feinberg y James Serrin. Analysis and Thermomechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-61598-6.
Texto completoFrémond, Michel. Non-Smooth Thermomechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002.
Buscar texto completoRiga, AT y MC Neag, eds. Materials Characterization by Thermomechanical Analysis. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1991. http://dx.doi.org/10.1520/stp1136-eb.
Texto completoT, Riga Alan, Neag C. Michael y ASTM Committee E-37 on Thermal Measurements., eds. Materials characterization by thermomechanical analysis. Philadelphia, PA: ASTM, 1991.
Buscar texto completoFinite element analysis: Thermomechanics of solids. 2a ed. Boca Raton, FL: CRC Press, 2008.
Buscar texto completoNicholson, D. W. Finite element analysis: Thermomechanics of solids. 2a ed. Boca Raton: CRC Press, 2008.
Buscar texto completoNicholson, D. W. Finite element analysis: Thermomechanics of solids. 2a ed. Boca Raton: CRC Press, 2008.
Buscar texto completoM, Mirdamadi y Langley Research Center, eds. Analysis of thermomechanical fatigue of unidirectional titanium metal matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
Buscar texto completoM, Mirdamadi y Langley Research Center, eds. Analysis of the thermomechanical fatigue of unidirectional titanium metal matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
Buscar texto completoCapítulos de libros sobre el tema "Thermomechanical Analysi"
Gooch, Jan W. "Thermomechanical Analysis". En Encyclopedic Dictionary of Polymers, 745. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11793.
Texto completoWagner, Matthias. "Thermomechanical Analysis". En Thermal Analysis in Practice, 187–209. München: Carl Hanser Verlag GmbH & Co. KG, 2017. http://dx.doi.org/10.3139/9781569906446.011.
Texto completoMeyghani, Bahman y Mokhtar Awang. "Thermomechanical Analysis". En Welding Simulations Using ABAQUS, 5–6. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1320-4_2.
Texto completoBrown, Michael E. "Thermomechanical analysis (TMA)". En Introduction to Thermal Analysis, 63–68. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-1219-9_7.
Texto completoEhrenstein, Gottfried W., Gabriela Riedel y Pia Trawiel. "Thermomechanical Analysis (TMA)". En Thermal Analysis of Plastics, 172–208. München: Carl Hanser Verlag GmbH & Co. KG, 2004. http://dx.doi.org/10.3139/9783446434141.004.
Texto completoDay, W. A. "On the Failure of the Maximum Principle in Coupled Thermoelasticity". En Analysis and Thermomechanics, 1–12. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-61598-6_1.
Texto completoMacCamy, R. C. y Ernst Stephan. "A Skin Effect Approximation for Eddy Current Problems". En Analysis and Thermomechanics, 175–86. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-61598-6_10.
Texto completoWyler, Oswald. "Algebraic Theories for Continuous Semilattices". En Analysis and Thermomechanics, 187–201. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-61598-6_11.
Texto completoŠilhavý, Miroslav. "The Existence of the Flux Vector and the Divergence Theorem for General Cauchy Fluxes". En Analysis and Thermomechanics, 203–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-61598-6_12.
Texto completoMarris, A. W. "Isochoric Circulation-Preserving Motions with Stream-Lines of a Potential Motion". En Analysis and Thermomechanics, 221–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-61598-6_13.
Texto completoActas de conferencias sobre el tema "Thermomechanical Analysi"
Pryputniewicz, Ryszard J. (Rich) y Dariusz R. Pryputniewicz. "Thermomechanical Effects in Packaging: Matching CTE or Not?" En ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15517.
Texto completoBenson, Michael, David Rudland y Mark Kirk. "Thermomechanical Analysis of Pressure Vessels". En ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78229.
Texto completoThuresson, Daniel. "Thermomechanical Analysis of Friction Brakes". En 18th Annual Brake Colloquium And Engineering Display. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-2775.
Texto completoVala, J., S. Št’astník, V. Kozák, Theodore E. Simos, George Psihoyios y Ch Tsitouras. "Computational Thermomechanical Modelling of Early-Age Silicate Composites". En NUMERICAL ANALYSIS AND APPLIED MATHEMATICS: International Conference on Numerical Analysis and Applied Mathematics 2009: Volume 1 and Volume 2. AIP, 2009. http://dx.doi.org/10.1063/1.3241435.
Texto completoCragun, Rebecca y Larry L. Howell. "Linear Thermomechanical Microactuators". En ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0265.
Texto completoZhang, Ch, A. Ekhlakov, O. Khay, X. W. Gao, J. Sladek, V. Sladek, Jane W. Z. Lu, Andrew Y. T. Leung, Vai Pan Iu y Kai Meng Mok. "Thermomechanical Analysis of Functionally Graded Materials". En PROCEEDINGS OF THE 2ND INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL MECHANICS AND THE 12TH INTERNATIONAL CONFERENCE ON THE ENHANCEMENT AND PROMOTION OF COMPUTATIONAL METHODS IN ENGINEERING AND SCIENCE. AIP, 2010. http://dx.doi.org/10.1063/1.3452305.
Texto completoMach, Pavel, David Busek y Radek Polansky. "Thermomechanical analysis of electrically conductive adhesives". En 2010 3rd Electronic System-Integration Technology Conference (ESTC). IEEE, 2010. http://dx.doi.org/10.1109/estc.2010.5642859.
Texto completoCura`, Francesca, Graziano Curti y Raffaella Sesana. "Thermomechanical Model and Experimental Analysis of Progressive Fatigue Damage in Steel Specimens". En ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95114.
Texto completoAVERILL, R. y J. REDDY. "THERMOMECHANICAL POSTBUCKLING ANALYSIS OF LAMINATED COMPOSITE SHELLS". En 34th Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1993. http://dx.doi.org/10.2514/6.1993-1337.
Texto completoCarlson, Frederick M., Taipao Lee, John C. Moosbrugger y David J. Larson, Jr. "Thermomechanical analysis in directional solidification of CdTe". En SPIE's 1996 International Symposium on Optical Science, Engineering, and Instrumentation, editado por Narayanan Ramachandran. SPIE, 1996. http://dx.doi.org/10.1117/12.244328.
Texto completoInformes sobre el tema "Thermomechanical Analysi"
Adams, Jillian Cathleen. Thermomechanical Analysis (TMA) and its application to polymer systems. Office of Scientific and Technical Information (OSTI), mayo de 2016. http://dx.doi.org/10.2172/1254935.
Texto completoNaatz, Lauren Catherine. Literature Review of Thermomechanical Analysis, Its Instrument Components and Applications. Office of Scientific and Technical Information (OSTI), junio de 2020. http://dx.doi.org/10.2172/1633564.
Texto completoNaatz, Lauren Catherine. Literature Review of Thermomechanical Analysis, Its Instrument Components and Applications. Office of Scientific and Technical Information (OSTI), junio de 2020. http://dx.doi.org/10.2172/1633565.
Texto completoBauer, S. J., L. S. Costin y J. F. Holland. Preliminary analyses in support of in situ thermomechanical investigations. Office of Scientific and Technical Information (OSTI), diciembre de 1988. http://dx.doi.org/10.2172/137488.
Texto completoUnderwood, J. H., P. J. Cote y G. N. Vigilante. Thermomechanical and Fracture Analysis of Silicon Carbide in Cannon Bore Applications. Fort Belvoir, VA: Defense Technical Information Center, junio de 2003. http://dx.doi.org/10.21236/ada416282.
Texto completoCheng, Yi-Wen y Christian L. Sargent. Data-reduction and analysis procedures used in NIST's thermomechanical processing research. Gaithersburg, MD: National Institute of Standards and Technology, 1990. http://dx.doi.org/10.6028/nist.ir.3950.
Texto completoBlanchard, J. P. y N. M. Ghoniem. Thermomechanical analysis of solid breeders in sphere-pac, plate, and pellet configurations. Office of Scientific and Technical Information (OSTI), febrero de 1986. http://dx.doi.org/10.2172/5550845.
Texto completoButkovich, T. R. y W. C. Patrick. Post-test thermomechanical calculations and preliminary data analysis for the Spent Fuel Test: Climax. Office of Scientific and Technical Information (OSTI), septiembre de 1985. http://dx.doi.org/10.2172/59990.
Texto completoArmero, Francisco. Analysis and Numerical Simulation of Strain Localization in Inelastic Solids Under Fully Coupled Thermomechanical and Poroplastic Conditions. Fort Belvoir, VA: Defense Technical Information Center, agosto de 2000. http://dx.doi.org/10.21236/ada380940.
Texto completoCostin, L. S. y E. P. Chen. An analysis of the G-Tunnel heated block thermomechanical response using a compliant-joint rock-mass model; Yucca Mountain Project. Office of Scientific and Technical Information (OSTI), diciembre de 1988. http://dx.doi.org/10.2172/137504.
Texto completo