Libros sobre el tema "Temperature and Heat Flux characterization"

Physics Laboratory (U.S.). Optical Technology Division, ed. Heat-flux sensor calibration. Gaithersburg, Md: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, Physics Laboratory, Optical Technology Division, 2004.

A, Cyr M., Strange R. R y United States. National Aeronautics and Space Administration., eds. Development of advanced high-temperature heat flux sensors. East Hartford, CT: United Technologies Corporation, Pratt & Whitney Group, Engineering Division, 1985.

Mohammad, Aslam y Langley Research Center, eds. Diamond thin film temperature and heat-flux sensors. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

United States. National Aeronautics and Space Administration., ed. Miniature high temperature plug-type heat flux guages. [Washington, DC]: National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., ed. Miniature high temperature plug-type heat flux guages. [Washington, DC]: National Aeronautics and Space Administration, 1992.

Paul, Kolodziej y United States. National Aeronautics and Space Administration., eds. Dual active surface heat flux gage probe. [Washington, DC]: National Aeronautics and Space Administration, 1995.

Paul, Kolodziej y United States. National Aeronautics and Space Administration., eds. Dual active surface heat flux gage probe. [Washington, DC]: National Aeronautics and Space Administration, 1995.

Yen, Yin-Chao. Sensible heat flux measurements near a cold surface. [Hanover, N.H.]: U.S. Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, 1995.

Beddini, Robert A. Analysis of turbulent convective and radiative heat transfer in high temperature rocket chamber flows. New York: AIAA, 1987.

Center, Langley Research, ed. High temperature electromagnetic characterization of thermal protection system tile materials. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Center, Langley Research, ed. High temperature electromagnetic characterization of thermal protection system tile materials. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

Liebert, Curt H. Heat flux measurement in SSME turbine blade tester. [Washington, DC]: National Aeronautics and Space Administration, 1990.

A, Smith Eric, MacPherson J. Ian y United States. National Aeronautics and Space Administration., eds. A comparison of surface sensible and latent heat fluxes for maircraft and surface measurements in FIFE 1987. [Washington, DC: National Aeronautics and Space Administration, 1990.

E, Melis Matthew y United States. National Aeronautics and Space Administration., eds. A high heat flux experiment for verification of thermostructural analysis. [Washington, DC]: NASA, 1988.

Vedova, B. Della. Geothermal heat flux at the COST B-2 and B-3 Wells, U.S. Atlantic continental margin. Woods Hole, Mass: Woods Hole Oceanographic Institution, 1987.

1945-, Mittal K. L., ed. Polyimides and other high temperature polymers: Synthesis, characterization, and applications. Leiden: VSP, 2009.

E, Melis Matthew y United States. National Aeronautics and Space Administration., eds. Hypersonic engine leading edge experiments in a high heat flux, supersonic flow environment. [Washington, DC]: National Aeronautics and Space Administration, 1994.

1944-, Urban T. C. y Geological Survey (U.S.), eds. Temperature, thermal-conductivity, and heat-flux data: Raft River area, Cassia County, Idaho (1974-1976). [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1986.

1944-, Urban T. C. y Geological Survey (U.S.), eds. Temperature, thermal-conductivity, and heat-flux data: Raft River area, Cassia County, Idaho (1974-1976). [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1986.

Siegel, Robert. Two-flux and Green's function method for transient radiative transfer in a semitransparent layer. [Washington, D.C: National Aeronautics and Space Administration, 1995.

Siegel, Robert. Two-flux and Green's function method for transient radiative transfer in a semitransparent layer. [Washington, D.C: National Aeronautics and Space Administration, 1995.

Siegel, Robert. Two-flux and Green's function method for transient radiative transfer in a semitransparent layer. [Washington, D.C: National Aeronautics and Space Administration, 1995.

D, Craven P., Richards P. G y United States. National Aeronautics and Space Administration., eds. A modified thermal conductivity for low density plasma magnetic flux tubes. [Washington, D.C: American Geophysical Union, 1995.

D, Craven P., Richards P. G y United States. National Aeronautics and Space Administration., eds. A modified thermal conductivity for low density plasma magnetic flux tubes. [Washington, D.C: American Geophysical Union, 1995.

United States. National Aeronautics and Space Administration., ed. Final report submitted to ... George C. Marshall Space Flight Center ... for NAS8-36955 D.O. 47 entitled high temperature materials characterization. Huntsville, Ala: Johnson Research Center, University of Alabama in Huntsville, 1990.

1947-, Miller Robert A. y NASA Glenn Research Center, eds. Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

King, Paul I. Testing, analysis, and code verification of aerodynamics and heat transfer related to turbomachinery: Final report. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1991.

King, Paul I. Testing, analysis, and code verification of aerodynamics and heat transfer related to turbomachinery: Final report. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1991.

United States. National Aeronautics and Space Administration., ed. Effect of NASA advanced designs on thermal behavior of Ni-H₂ cells. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

Conference on Characterization and NDE of Heat Damage in Graphite Epoxy Composites (1993 Orlando, Fla.). Conference on Characterization and NDE of Heat Damage in Graphite Epoxy Composites: Proceedings, April 27-28, 1993, Orlando, Florida. Austin, Tex: Nondestructive Testing Information Analysis Center (NTIAC), Texas Research Institute Austin, 1993.

United States. National Aeronautics and Space Administration., ed. [FDNS code to predict wall heat fluxes or wall temperatures in rocket nozzles]: Final report. Huntsville, AL: University of Alabama in Huntsville, 1993.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket heat transfer and combustion measurements. [Washington, D.C: National Aeronautics and Space Administration, 1996.

United States. National Aeronautics and Space Administration., ed. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis. [Washington, D.C.]: National Aeronautics and Space Administration, 1997.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket combustion experiments. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

B, Gurganus T., Walker J. A. 1939- y Langley Research Center, eds. Development and characterization of powder metallurgy (PM) 2XXX series Al alloy products and metal matrix composite (MMC 2XXX Al/SiC materials for high temperature aircraft structural applications. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

United States. National Aeronautics and Space Administration., ed. [An analysis of gamma ray burst time histories]: Final report. Huntsville, AL: University of Alabama in Huntsville, Summer Faculty Fellowship Research Continuation Program, 1994.

1963-, Stephens Craig A. y United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Predicted thermal response of a cryogenic fuel tank exposed to simulated aerodynamic heating profiles with different cryogens and fill levels. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991.

R, Strange R. y United States. National Aeronautics and Space Administration., eds. Development of sensors for ceramic components in advanced propulsion systems: Final report. [Washington, D.C.]: National Aeronautics and Space Administration, 1994.

United States. National Oceanic and Atmospheric Administration., ed. ATLAS OF SURFACE MARINE DATA 1994 VOLUME 6: HEAT FLUX SENSITIVITY TO SEA SURFACE TEMPERATURE... NOAA ATLAS NESDIS 12... U.S. DEPARTMENT OF COMMERCE... MARCH 1997. [S.l: s.n., 1998.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket heat transfer and combustion measurements. [Washington, D.C: National Aeronautics and Space Administration, 1996.

United States. National Aeronautics and Space Administration., ed. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis. [Washington, D.C.]: National Aeronautics and Space Administration, 1997.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket combustion experiments. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

McLean, M. Physical and Elastic Characterization (Characterization of High-Temperature Materials, Vol 4). Ashgate Publishing, 1989.

Mittal, K. L. Polyimides And Other High Temperature Polymers: Synthesis, Characterization. V.S.P. Intl Science, 2005.

Muhamad, Nauman Malik. Inverse Estimation of Heat Flux and Temperature in 3D Finite Domain. Grin Verlag, 2016.

Mechanical Testing (Characterization of High-Temperature Materials, Vol 3). Ashgate Publishing, 1988.

National Aeronautics and Space Administration (NASA) Staff. Microsample Characterization of Coatings for Grcop-84 for High Heat Flux Applications. Independently Published, 2018.

Mittal, K. L. Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications. Taylor & Francis Group, 2007.

Mittal, K. L. Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications. Brill Academic Publishers, 2001.

Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications. Brill Academic Publishers, 2003.