Literatura académica sobre el tema "Systèmes de fabrication reconfigurables"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Systèmes de fabrication reconfigurables".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Systèmes de fabrication reconfigurables"
Vigne, Benoît y Pierre-Jean Lapray. "Les Systèmes Embarqués Reconfigurables enseignés à des automaticiens". J3eA 21 (2022): 2050. http://dx.doi.org/10.1051/j3ea/20222050.
Texto completoDadouche, F. y W. Uhring. "Enseignement par la pratique de la conception conjointe Hard/Soft de systèmes numériques embarqués sur cible FPGA". J3eA 21 (2022): 1018. http://dx.doi.org/10.1051/j3ea/20221018.
Texto completoBeaumont, B., A. Simonin y E. Giguet. "Conception et fabrication des systèmes de chauffage". Revue Générale Nucléaire, n.º 1 (enero de 2007): 62–63. http://dx.doi.org/10.1051/rgn/20071062.
Texto completoZarcone, Roberta, Ahmed Hussein y Mohammad Mansouri. "Morphogenèse et fabrication d’une forme structurellement informée : expériences pédagogiques sur les systèmes funiculaires". SHS Web of Conferences 47 (2018): 01018. http://dx.doi.org/10.1051/shsconf/20184701018.
Texto completoDolgui, Alexandre, Olga Guschinskaya, Nikolai Guschinsky y Genrikh Levin. "Conception de systèmes de fabrication : prototype d'un logiciel d'aide à la décision". Journal of Decision Systems 14, n.º 4 (enero de 2005): 489–516. http://dx.doi.org/10.3166/jds.14.489-516.
Texto completo-GILLIERS, Frédéric. "Processus de fabrication de systèmes répartis centré sur un modèle : l'expérience du projet MORSE". Revue de l'Electricité et de l'Electronique -, n.º 03 (2006): 102. http://dx.doi.org/10.3845/ree.2006.036.
Texto completoAouchiche, Nedjma. "Défauts liés aux systèmes photovoltaïques autonomes et techniques de diagnostic - Etat de l’art". Journal of Renewable Energies 21, n.º 2 (30 de junio de 2018): 247–65. http://dx.doi.org/10.54966/jreen.v21i2.686.
Texto completoBelhamel, Maiouf. "Optimisation de la Performance d’un Collecteur Solaire Cylindro – parabolique à Caloduc : Réalisation et Dimensionnement du Caloduc". Journal of Renewable Energies 2, n.º 1 (30 de junio de 1999): 39–49. http://dx.doi.org/10.54966/jreen.v2i1.923.
Texto completoClaeys, Damien. "Le fantasme du démiurge : L'architecte soumis à la tentation du pouvoir". Acta Europeana Systemica 6 (12 de julio de 2020): 11–24. http://dx.doi.org/10.14428/aes.v6i1.56773.
Texto completoShiko, G. "Modélisation des données techniques des systèmes de production type ligne de fabrication des familles de produit". Revue Française de Gestion Industrielle 13, n.º 6 (1 de diciembre de 1994): 39–51. http://dx.doi.org/10.53102/1994.13.06.1034.
Texto completoTesis sobre el tema "Systèmes de fabrication reconfigurables"
Abid, Abdelmonaam. "Approche basée sur l’ingénierie système pour la conception intégrée des systèmes manufacturiers reconfigurables". Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLC020/document.
Texto completoToday, manufacturers are seeking new approaches that allow designers to effectively adapt manufacturing systems to an uncertain and disruptive environment. The concept of the reconfiguration of manufacturing systems is proposed in order to find solutions to the occurrence of disturbances within a complex manufacturing system. In the literature, integrating reconfiguration early in the design phase into system engineering by following an approach based on standards and paradigms is beginning to call for several new research studies. We propose a new approach based on system engineering to design manufacturing production systems so that they are reconfigurable from the point of view of operative and control part, ensuring coherence between models and meeting the requirements of the new industry. This approach is intended to guide the designer in modeling the manufacturing systems by integrating the concept of reconfiguration into system engineering.Then, developed models of different viewpoint are transformed according to predefined rules into holonic architecture models that bridge the gap between the conceptual modeling process and the simulation process. These holonic models are executable by the technology of multi-agent systems to facilitate their implementations. Afterwards, the designer will be able to verify and validate by simulation the criteria and key features of the reconfiguration in order to achieve the requested indicators. The obtained results show an effective reactivity to the internal and external disturbances with the most adequate configuration. We chose a reconfigurable manufacturing system which is the steel converter system to illustrate the utility and reliability of the proposed approach in different scenarios
Bensmaïne, Abderrahmane. "Algorithmes évolutionnaires et méthodes approchées multicritères pour la génération des processus de fabrication dans un environnement reconfigurable". Thesis, Université de Lorraine, 2013. http://www.theses.fr/2013LORR0222/document.
Texto completoThe uncertain context of current markets has contributed to the development of manufacturing systems, resulting in systems with different features and principles, trying to meet the changing market demands. Reconfigurable manufacturing system (RMS) is a recent class of systems where machines, machine components and the handling system can be added, modified, deleted or exchanged according to the production needs. RMS combines the high throughput of dedicated manufacturing systems with the customizability of flexible systems. The main component of an RMS is the reconfigurable machine (RMT: Reconfigurable Machine Tool) which has a structure that allows reconfiguration. We focus in this work on CAPP (Computer-Aided Process Planning) to generate effective the process plans in an RMS that take advantage of the high degree of RMT reconfigurability Three problems associated with the function process planning are discussed: (1) the generation of process plans for a single-unit case, where we adapted multi-criteria optimization techniques (NSGA-II, AMOSA) (2) the generation of process plans in the multi-unit case, where we developed simulation based optimization technique, and (3) the integration of process planning and scheduling functions, where we developed a new heuristic aiming to achieve this integration. All the proposed approaches have been validated by numerical experiments, demonstrating their applicability and effectiveness
Bensmaïne, Abderrahmane. "Algorithmes évolutionnaires et méthodes approchées multicritères pour la génération des processus de fabrication dans un environnement reconfigurable". Electronic Thesis or Diss., Université de Lorraine, 2013. http://www.theses.fr/2013LORR0222.
Texto completoThe uncertain context of current markets has contributed to the development of manufacturing systems, resulting in systems with different features and principles, trying to meet the changing market demands. Reconfigurable manufacturing system (RMS) is a recent class of systems where machines, machine components and the handling system can be added, modified, deleted or exchanged according to the production needs. RMS combines the high throughput of dedicated manufacturing systems with the customizability of flexible systems. The main component of an RMS is the reconfigurable machine (RMT: Reconfigurable Machine Tool) which has a structure that allows reconfiguration. We focus in this work on CAPP (Computer-Aided Process Planning) to generate effective the process plans in an RMS that take advantage of the high degree of RMT reconfigurability Three problems associated with the function process planning are discussed: (1) the generation of process plans for a single-unit case, where we adapted multi-criteria optimization techniques (NSGA-II, AMOSA) (2) the generation of process plans in the multi-unit case, where we developed simulation based optimization technique, and (3) the integration of process planning and scheduling functions, where we developed a new heuristic aiming to achieve this integration. All the proposed approaches have been validated by numerical experiments, demonstrating their applicability and effectiveness
Ameer, Muhammad. "Integrated and multi-criteria approaches for process plan generation in reconfigurable manufacturing systems with consideration of system capabilities and product constraints". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0242.
Texto completoModern manufacturing systems are going through a paradigm shift where the focus is on the integrating the digital technologies in the production systems to address the challenge of uncertain market demands. Manufacturing systems needs certain amount responsiveness to address these uncertainties by adapting accordingly, and require more changeability at physical as well as logical levels. For this purpose, modern-day manufacturing systems are designed with dynamic resource capabilities, with modular components, so that they can provide the required amount of reconfigurability. From the perspective of "industry 4.0", reconfigurability is vital for the effective adaptation of manufacturing systems in a complex environment. Reconfigurability provides the quick adaptation of these systems along with quick responsiveness towards socio-techno-economic competitiveness. The objective is to respond to modern-day challenges (both external and internal), i.e. mass customization, globalization, product variety management, system reconfiguration management, and reducing the lead time.In this thesis, the design problem of reconfigurable manufacturing systems (RMS) is considered which meets the aforementioned requirements. The goal is to design a responsive system based on two key features modularity and reconfigurability. We study the RMS design problem as, the development of a process plan for a particular part of the part family along with the selection of the system's dynamic resource capabilities to perform that part. This work is divided into three parts: (1) Co-generation of process and setup plan for a part in the reconfigurable environment. The main objective is to develop a new approach to jointly consider the setup and process plan constraints, with consideration of relationships between the operations. (2) Minimisation of reconfiguration effort in process design. We propose a novel performance index of the effort generated by the machines and fixtures reconfiguration, and part transfer. The objective is to ensure better responsiveness and high performance of the designed process plan. (3) Maximisation the utilization of dynamic resource capabilities of RMS design. We consider a RMS design problem for machine selection, where selection of different types of reconfigurable machine tools (RMTs) are carried out for performing the process plan of considered part
Jiménez, Jose-Fernando. "Architecture dynamique et hybride pour la reconfiguration optimale des systèmes de contrôle : application au contrôle de fabrication". Thesis, Valenciennes, 2017. http://www.theses.fr/2017VALE0031/document.
Texto completoDiscrete-event control systems have the opportunity to resolve significant challenges of modern society. In particular, these represent a fundamental solution to manage and control the new technological advances in compliance to the increased consciousness of sustainable development. The parameterization, configuration and decision-making of these control systems are critical aspects that impact the performance and productivity required. Dynamic control architecture approaches, such as reconfigurable control systems, have been proposed for modelling such systems. However, such approaches have failed to address the recovery of the reconfiguration process as these focus on the continuity of execution rather than on the optimisation of the reconfiguration. This dissertation proposes a reference architecture for a reconfigurable control system, named Pollux, designed to manage and adjust optimally and in real time the architecture of a control system, either to guide operational execution or to respond to a system perturbation. Considering a proposed framework of an optimal configuration of control architectures based on shared governance, this proposed approach aims to orchestrate a flexible and customizable decisional entity, a representation that characterize the unique configuration and control solution of the control architecture, and a three-module reconfiguration mechanism that integrates the optimality-based principles into the reconfiguration process, to ensure a recovery of global performance and/or minimise the degradation caused by perturbations. Our approach is applied in the manufacturing domain and is validated in a simulation and a real flexible manufacturing system cell located at the University of Valenciennes, France. The validation conducted in three experimental scenarios verified the benefits of our approach and encourage us to continue research in this direction
Haddou, Benderbal Hichem. "Développement d’une nouvelle famille d’indicateurs de performance pour la conception d’un système manufacturier reconfigurable (RMS) : approches évolutionnaires multicritères". Electronic Thesis or Diss., Université de Lorraine, 2018. http://www.theses.fr/2018LORR0112.
Texto completoThe modern manufacturing environment is facing a paradigm shift that require more changeability at physical and logical levels. A Changeable Manufacturing System is defined as a production system that has the ability to facilitate the right changes, allowing the adjustment of its structures and processes in response to the different needs. In this context, manufacturing systems must have a very high level of reconfigurability, which is considered to be one of the major enablers of changeability. From the perspective of the “Factory of the future”, the reconfigurability is essential to effectively adapt to the ever-increasing complexity of manufacturing environments. It allows a rapid, efficient and easy adaptation of these systems while being responsive, robust and economically competitive. The objective is to respond to new internal and external constraints in terms of globalization, variety of products, mass customization, and shorter lead times. Through this thesis, we study the problem of design of reconfigurable manufacturing systems (RMS) that meets these requirements. The goal is to design responsive systems based on their key features of reconfigurability. We have studied the RMS design problem on three levels: (i) the level of the components, relating to the modules of the reconfigurable machines, (ii) the machine level and their interactions, as well as the impact of these interactions on the system and (iii) the workshop level composed of all the reconfigurable machines. We have developed for each level, performance indicators to ensure a better responsiveness and a high performance of the designed system, like the modularity index, the flexibility index, the robustness index and the layout evolution effort of a reconfigurable system. For each of the studied problems, we developed multicriteria optimization models, solved through heuristics or multicriteria metaheuristics (such as archived multi-objective simulated annealing (AMOSA) and multi-objective genetic algorithms (NSGA-II)). Numerous numerical experiments and analyzes have been performed to demonstrate the applicability of our approaches
Haddou, Benderbal Hichem. "Développement d’une nouvelle famille d’indicateurs de performance pour la conception d’un système manufacturier reconfigurable (RMS) : approches évolutionnaires multicritères". Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0112/document.
Texto completoThe modern manufacturing environment is facing a paradigm shift that require more changeability at physical and logical levels. A Changeable Manufacturing System is defined as a production system that has the ability to facilitate the right changes, allowing the adjustment of its structures and processes in response to the different needs. In this context, manufacturing systems must have a very high level of reconfigurability, which is considered to be one of the major enablers of changeability. From the perspective of the “Factory of the future”, the reconfigurability is essential to effectively adapt to the ever-increasing complexity of manufacturing environments. It allows a rapid, efficient and easy adaptation of these systems while being responsive, robust and economically competitive. The objective is to respond to new internal and external constraints in terms of globalization, variety of products, mass customization, and shorter lead times. Through this thesis, we study the problem of design of reconfigurable manufacturing systems (RMS) that meets these requirements. The goal is to design responsive systems based on their key features of reconfigurability. We have studied the RMS design problem on three levels: (i) the level of the components, relating to the modules of the reconfigurable machines, (ii) the machine level and their interactions, as well as the impact of these interactions on the system and (iii) the workshop level composed of all the reconfigurable machines. We have developed for each level, performance indicators to ensure a better responsiveness and a high performance of the designed system, like the modularity index, the flexibility index, the robustness index and the layout evolution effort of a reconfigurable system. For each of the studied problems, we developed multicriteria optimization models, solved through heuristics or multicriteria metaheuristics (such as archived multi-objective simulated annealing (AMOSA) and multi-objective genetic algorithms (NSGA-II)). Numerous numerical experiments and analyzes have been performed to demonstrate the applicability of our approaches
Callec, Vincent. "Systèmes antennaires reconfigurables pour l'observation spatiale". Phd thesis, INSA de Rennes, 2013. http://tel.archives-ouvertes.fr/tel-00935319.
Texto completoCharra, Olivier. "Conception de noyaux de systèmes embarqués reconfigurables". Grenoble 1, 2004. http://www.theses.fr/2004GRE10047.
Texto completoThe vision of the emergence of a global environment for the information management where most of the physical object around us will be equipped with processors, communication capabilities and interconnected through various networks forces us to redesign the computing systems. Instead of heavy, monolithic and non-evolutive systems, we must design light, flexible and reconfigurable systems. This work presents a new architecture allowing the conception and development of flexible and reconfigurable operating system kernels for embedded systems
Baqai, Aemer. "Co-conception des processus d’usinage et des configurations cinématiques d’un système de production reconfigurable". Paris, ENSAM, 2010. http://www.theses.fr/2010ENAM0010.
Texto completoThis work is based in the domain of the design of manufacturing systems and attempts to respond to the problem statement: "How to optimize the design process of the machining process plans and reconfigurable manufacturing systems, while taking into account: the interactions between processes and resources, the technological constraints imposed by the part to be manufactured"? This response is given via a proposal for the coexploration of the solution space of the process plans and kinematic configurations. A design framework has been formalised which gives a link between the strategic and operational level. With an objective to explore ail solutions at the operational level, an algorithmic approach for the generation of process plans and corresponding machine kinematic configurations of RMS has been formalised, developed, implemented and validated on 3 parts belonging to automobile sector. This approach can be compared to the dynamic constraint satisfaction problem, it exploits the set of possibilities offered by RMS: parallel stru ctures, simultaneous machining. . . The process of generation of process plans is supported by representation of the generated solutions in the form of graphs. For the selection the generated solutions, performance indicators have been defined, structured, and their evaluation approach identified. A particular attention was given to the criterion of quality. An adaptation of the existing approaches was carried out and simulation of geometric deviation in the generated solutions was done. Generated solutions were adapted to be graphically represented and used for the simulation by L1I. This was done to validate the obtained results
Libros sobre el tema "Systèmes de fabrication reconfigurables"
Widmer, Marino. Modèles mathématiques pour une gestion efficace des ateliers flexibles. Lausanne: Presses polytechniques et universitaires romandes, 1991.
Buscar texto completo1934-, Warnecke H. J. y Steinhilper R, eds. Flexible manufacturing systems. Bedford, UK: IFS (Publications), 1985.
Buscar texto completoOphelia, Noor, Ricard Laurent (1964 ) y Bauwens Michel, eds. FabLabs, etc: Les nouveaux lieux de fabrication numérique. Paris: Eyrolles, 2014.
Buscar texto completoTullio, Tolio, ed. Design of flexible production systems: Methodologies and tools. Berlin: Springer, 2009.
Buscar texto completoR, Standridge Charles, ed. Modeling and analysis of manufacturing systems. New York: Wiley, 1993.
Buscar texto completoAskin, Ronald G. Modeling and analysis of manufacturing systems. New York: Wiley, 1993.
Buscar texto completoManufacturing systems: An introduction to the technologies. Buckingham: Open UP, 1988.
Buscar texto completoManufacturing systems: An introduction to the technologies. 2a ed. London: Chapman & Hall, 1994.
Buscar texto completoWilliams, D. J. Manufacturing systems: An introduction to the technologies. New York: Halsted Press, 1988.
Buscar texto completoAutomation, production systems, and computer integrated manufacturing. 2a ed. Engelwood Cliffs, N.J: Prentice-Hall, 1987.
Buscar texto completoCapítulos de libros sobre el tema "Systèmes de fabrication reconfigurables"
DA CUNHA, Catherine y Nathalie KLÉMENT. "Impact des ICPS sur les systèmes de production reconfigurables". En Digitalisation et contrôle des systèmes industriels cyber-physiques, 217–33. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9085.ch11.
Texto completoBoi, Luciano. "11 : Limites du réductionnisme et nouvelles approches dans l'étude des phénomènes naturels et des systèmes vivants". En La fabrication du psychisme, 207–40. La Découverte, 2006. http://dx.doi.org/10.3917/dec.manci.2006.01.0207.
Texto completoDERIGENT, William y Laurent JOBLOT. "Impact des systèmes industriels cyber-physiques sur les métiers du bâtiment". En Digitalisation et contrôle des systèmes industriels cyber-physiques, 277–95. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9085.ch14.
Texto completoActas de conferencias sobre el tema "Systèmes de fabrication reconfigurables"
Lacombat, M. "Équipements optiques pour la fabrication microélectronique". En Systèmes optiques. Les Ulis, France: EDP Sciences, 1992. http://dx.doi.org/10.1051/sfo/1992010.
Texto completo